A use after free flaw was found in hfsplus_put_super in fs/hfsplus/super.c in the Linux Kernel. This flaw could allow a local user to cause a denial of service problem.

A Use After Free vulnerability in the routing protocol daemon of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause Denial of Service (DoS). In a rib sharding scenario the rpd process will crash shortly after specific CLI command is issued. This issue is more likely to occur in a scenario with high route scale (>1M routes). This issue affects: Juniper Networks Junos OS * 20.2 version 20.2R3-S5 and later versions prior to 20.2R3-S6; * 20.3 version 20.3R3-S2 and later versions prior to 20.3R3-S5; * 20.4 version 20.4R3-S1 and later versions prior to 20.4R3-S4 * 21.1 version 21.1R3 and later versions prior to 21.1R3-S3; * 21.2 version 21.2R1-S2, 21.2R2-S1 and later versions prior to 21.2R3-S2; * 21.3 version 21.3R2 and later versions prior to 21.3R3; * 21.4 versions prior to 21.4R2-S1, 21.4R3; * 22.1 versions prior to 22.1R2. Juniper Networks Junos OS Evolved * 20.4-EVO version 20.4R3-S1-EVO and later versions prior to 20.4R3-S6-EVO; * 21.2-EVO version 21.2R1-S2-EVO and later versions prior to 21.2R3-S4-EVO; * 21.3-EVO version 21.3R2-EVO and later versions prior to 21.3R3-S1-EVO; * 21.4-EVO versions prior to 21.4R2-S1-EVO, 21.4R3-EVO; * 22.1-EVO versions prior to 22.1R2-EVO.

Use after free in some Intel(R) Aptio* V UEFI Firmware Integrator Tools may allowed an authenticated user to potentially enable denial of service via local access.

A flaw has been found in mruby up to 3.4.0. This affects the function mrb_vm_exec of the file src/vm.c of the component JMPNOT-to-JMPIF Optimization. Executing a manipulation can lead to use after free. The attack needs to be launched locally. The exploit has been published and may be used. This patch is called e50f15c1c6e131fa7934355eb02b8173b13df415. It is advisable to implement a patch to correct this issue.

A use-after-free flaw was found in the Linux kernel’s Amateur Radio AX.25 protocol functionality in the way a user connects with the protocol. This flaw allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix NULL ptr deref in crypto_aead_setkey() Neither SMB3.0 or SMB3.02 supports encryption negotiate context, so when SMB2_GLOBAL_CAP_ENCRYPTION flag is set in the negotiate response, the client uses AES-128-CCM as the default cipher. See MS-SMB2 3.3.5.4. Commit b0abcd65ec54 ("smb: client: fix UAF in async decryption") added a @server->cipher_type check to conditionally call smb3_crypto_aead_allocate(), but that check would always be false as @server->cipher_type is unset for SMB3.02. Fix the following KASAN splat by setting @server->cipher_type for SMB3.02 as well. mount.cifs //srv/share /mnt -o vers=3.02,seal,... BUG: KASAN: null-ptr-deref in crypto_aead_setkey+0x2c/0x130 Read of size 8 at addr 0000000000000020 by task mount.cifs/1095 CPU: 1 UID: 0 PID: 1095 Comm: mount.cifs Not tainted 6.12.0 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? crypto_aead_setkey+0x2c/0x130 kasan_report+0xda/0x110 ? crypto_aead_setkey+0x2c/0x130 crypto_aead_setkey+0x2c/0x130 crypt_message+0x258/0xec0 [cifs] ? __asan_memset+0x23/0x50 ? __pfx_crypt_message+0x10/0x10 [cifs] ? mark_lock+0xb0/0x6a0 ? hlock_class+0x32/0xb0 ? mark_lock+0xb0/0x6a0 smb3_init_transform_rq+0x352/0x3f0 [cifs] ? lock_acquire.part.0+0xf4/0x2a0 smb_send_rqst+0x144/0x230 [cifs] ? __pfx_smb_send_rqst+0x10/0x10 [cifs] ? hlock_class+0x32/0xb0 ? smb2_setup_request+0x225/0x3a0 [cifs] ? __pfx_cifs_compound_last_callback+0x10/0x10 [cifs] compound_send_recv+0x59b/0x1140 [cifs] ? __pfx_compound_send_recv+0x10/0x10 [cifs] ? __create_object+0x5e/0x90 ? hlock_class+0x32/0xb0 ? do_raw_spin_unlock+0x9a/0xf0 cifs_send_recv+0x23/0x30 [cifs] SMB2_tcon+0x3ec/0xb30 [cifs] ? __pfx_SMB2_tcon+0x10/0x10 [cifs] ? lock_acquire.part.0+0xf4/0x2a0 ? __pfx_lock_release+0x10/0x10 ? do_raw_spin_trylock+0xc6/0x120 ? lock_acquire+0x3f/0x90 ? _get_xid+0x16/0xd0 [cifs] ? __pfx_SMB2_tcon+0x10/0x10 [cifs] ? cifs_get_smb_ses+0xcdd/0x10a0 [cifs] cifs_get_smb_ses+0xcdd/0x10a0 [cifs] ? __pfx_cifs_get_smb_ses+0x10/0x10 [cifs] ? cifs_get_tcp_session+0xaa0/0xca0 [cifs] cifs_mount_get_session+0x8a/0x210 [cifs] dfs_mount_share+0x1b0/0x11d0 [cifs] ? __pfx___lock_acquire+0x10/0x10 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? lock_acquire.part.0+0xf4/0x2a0 ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? lock_release+0x203/0x5d0 cifs_mount+0xb3/0x3d0 [cifs] ? do_raw_spin_trylock+0xc6/0x120 ? __pfx_cifs_mount+0x10/0x10 [cifs] ? lock_acquire+0x3f/0x90 ? find_nls+0x16/0xa0 ? smb3_update_mnt_flags+0x372/0x3b0 [cifs] cifs_smb3_do_mount+0x1e2/0xc80 [cifs] ? __pfx_vfs_parse_fs_string+0x10/0x10 ? __pfx_cifs_smb3_do_mount+0x10/0x10 [cifs] smb3_get_tree+0x1bf/0x330 [cifs] vfs_get_tree+0x4a/0x160 path_mount+0x3c1/0xfb0 ? kasan_quarantine_put+0xc7/0x1d0 ? __pfx_path_mount+0x10/0x10 ? kmem_cache_free+0x118/0x3e0 ? user_path_at+0x74/0xa0 __x64_sys_mount+0x1a6/0x1e0 ? __pfx___x64_sys_mount+0x10/0x10 ? mark_held_locks+0x1a/0x90 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Implement blocking domain This fixes a crash when surprise hot-unplugging a PCI device. This crash happens because during hot-unplug __iommu_group_set_domain_nofail() attaching the default domain fails when the platform no longer recognizes the device as it has already been removed and we end up with a NULL domain pointer and UAF. This is exactly the case referred to in the second comment in __iommu_device_set_domain() and just as stated there if we can instead attach the blocking domain the UAF is prevented as this can handle the already removed device. Implement the blocking domain to use this handling. With this change, the crash is fixed but we still hit a warning attempting to change DMA ownership on a blocked device.

In the Linux kernel, the following vulnerability has been resolved: net/ncsi: Disable the ncsi work before freeing the associated structure The work function can run after the ncsi device is freed, resulting in use-after-free bugs or kernel panic.

A use-after-free flaw was found in the Linux kernel’s core dump subsystem. This flaw allows a local user to crash the system. Only if patch 390031c94211 ("coredump: Use the vma snapshot in fill_files_note") not applied yet, then kernel could be affected.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow Syzkaller reported this splat: ================================================================== BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662 CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline] mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572 mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg net/socket.c:744 [inline] ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661 __sys_sendmsg+0x117/0x1f0 net/socket.c:2690 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7fe4579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 5387: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803 subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956 __tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline] tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167 mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764 __mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592 mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642 mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline] mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943 mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777 process_one_work+0x958/0x1b30 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/ke ---truncated---

A use-after-free flaw was found in reconn_set_ipaddr_from_hostname in fs/cifs/connect.c in the Linux kernel. The issue occurs when it forgets to set the free pointer server->hostname to NULL, leading to an invalid pointer request.

In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix potential use after free bug The free_device_compression_mode(iaa_device, device_mode) function frees "device_mode" but it iss passed to iaa_compression_modes[i]->free() a few lines later resulting in a use after free. The good news is that, so far as I can tell, nothing implements the ->free() function and the use after free happens in dead code. But, with this fix, when something does implement it, we'll be ready. :)

A use-after-free flaw was found in io_uring/filetable.c in io_install_fixed_file in the io_uring subcomponent in the Linux Kernel during call cleanup. This flaw may lead to a denial of service.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: altera-msgdma: properly free descriptor in msgdma_free_descriptor Remove list_del call in msgdma_chan_desc_cleanup, this should be the role of msgdma_free_descriptor. In consequence replace list_add_tail with list_move_tail in msgdma_free_descriptor. This fixes the path: msgdma_free_chan_resources -> msgdma_free_descriptors -> msgdma_free_desc_list -> msgdma_free_descriptor which does not correctly free the descriptors as first nodes were not removed from the list.

In the Linux kernel, the following vulnerability has been resolved: qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failure adapter->dcb would get silently freed inside qlcnic_dcb_enable() in case qlcnic_dcb_attach() would return an error, which always happens under OOM conditions. This would lead to use-after-free because both of the existing callers invoke qlcnic_dcb_get_info() on the obtained pointer, which is potentially freed at that point. Propagate errors from qlcnic_dcb_enable(), and instead free the dcb pointer at callsite using qlcnic_dcb_free(). This also removes the now unused qlcnic_clear_dcb_ops() helper, which was a simple wrapper around kfree() also causing memory leaks for partially initialized dcb. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: NFC: port100: fix use-after-free in port100_send_complete Syzbot reported UAF in port100_send_complete(). The root case is in missing usb_kill_urb() calls on error handling path of ->probe function. port100_send_complete() accesses devm allocated memory which will be freed on probe failure. We should kill this urbs before returning an error from probe function to prevent reported use-after-free Fail log: BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670 ... Allocated by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524 alloc_dr drivers/base/devres.c:116 [inline] devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823 devm_kzalloc include/linux/device.h:209 [inline] port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502 Freed by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:236 [inline] __cache_free mm/slab.c:3437 [inline] kfree+0xf8/0x2b0 mm/slab.c:3794 release_nodes+0x112/0x1a0 drivers/base/devres.c:501 devres_release_all+0x114/0x190 drivers/base/devres.c:530 really_probe+0x626/0xcc0 drivers/base/dd.c:670

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unregister flowtable hooks on netns exit Unregister flowtable hooks before they are releases via nf_tables_flowtable_destroy() otherwise hook core reports UAF. BUG: KASAN: use-after-free in nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 Read of size 4 at addr ffff8880736f7438 by task syz-executor579/3666 CPU: 0 PID: 3666 Comm: syz-executor579 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] __dump_stack lib/dump_stack.c:88 [inline] lib/dump_stack.c:106 dump_stack_lvl+0x1dc/0x2d8 lib/dump_stack.c:106 lib/dump_stack.c:106 print_address_description+0x65/0x380 mm/kasan/report.c:247 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] __kasan_report mm/kasan/report.c:433 [inline] mm/kasan/report.c:450 kasan_report+0x19a/0x1f0 mm/kasan/report.c:450 mm/kasan/report.c:450 nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 __nf_register_net_hook+0x27e/0x8d0 net/netfilter/core.c:429 net/netfilter/core.c:429 nf_register_net_hook+0xaa/0x180 net/netfilter/core.c:571 net/netfilter/core.c:571 nft_register_flowtable_net_hooks+0x3c5/0x730 net/netfilter/nf_tables_api.c:7232 net/netfilter/nf_tables_api.c:7232 nf_tables_newflowtable+0x2022/0x2cf0 net/netfilter/nf_tables_api.c:7430 net/netfilter/nf_tables_api.c:7430 nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv+0x10e6/0x2550 net/netfilter/nfnetlink.c:652 net/netfilter/nfnetlink.c:652 __nft_release_hook() calls nft_unregister_flowtable_net_hooks() which only unregisters the hooks, then after RCU grace period, it is guaranteed that no packets add new entries to the flowtable (no flow offload rules and flowtable hooks are reachable from packet path), so it is safe to call nf_flow_table_free() which cleans up the remaining entries from the flowtable (both software and hardware) and it unbinds the flow_block.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: Fix use-after-free bug by not setting udc->dev.driver The syzbot fuzzer found a use-after-free bug: BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320 Read of size 8 at addr ffff88802b934098 by task udevd/3689 CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 dev_uevent+0x712/0x780 drivers/base/core.c:2320 uevent_show+0x1b8/0x380 drivers/base/core.c:2391 dev_attr_show+0x4b/0x90 drivers/base/core.c:2094 Although the bug manifested in the driver core, the real cause was a race with the gadget core. dev_uevent() does: if (dev->driver) add_uevent_var(env, "DRIVER=%s", dev->driver->name); and between the test and the dereference of dev->driver, the gadget core sets dev->driver to NULL. The race wouldn't occur if the gadget core registered its devices on a real bus, using the standard synchronization techniques of the driver core. However, it's not necessary to make such a large change in order to fix this bug; all we need to do is make sure that udc->dev.driver is always NULL. In fact, there is no reason for udc->dev.driver ever to be set to anything, let alone to the value it currently gets: the address of the gadget's driver. After all, a gadget driver only knows how to manage a gadget, not how to manage a UDC. This patch simply removes the statements in the gadget core that touch udc->dev.driver.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: fix possible use-after-free Eric Dumazet says: The sock_hold() side seems suspect, because there is no guarantee that sk_refcnt is not already 0. On failure, we cannot queue the packet and need to indicate an error. The packet will be dropped by the caller. v2: split skb prefetch hunk into separate change

An issue was discovered in the Linux kernel 5.10.x before 5.10.155. A use-after-free in io_sqpoll_wait_sq in fs/io_uring.c allows an attacker to crash the kernel, resulting in denial of service. finish_wait can be skipped. An attack can occur in some situations by forking a process and then quickly terminating it. NOTE: later kernel versions, such as the 5.15 longterm series, substantially changed the implementation of io_sqpoll_wait_sq.

In bt driver, there is a thread competition leads to early release of resources to be accessed. This could lead to local denial of service in kernel.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix CT entry update leaks of modify header context The cited commit allocates a new modify header to replace the old one when updating CT entry. But if failed to allocate a new one, eg. exceed the max number firmware can support, modify header will be an error pointer that will trigger a panic when deallocating it. And the old modify header point is copied to old attr. When the old attr is freed, the old modify header is lost. Fix it by restoring the old attr to attr when failed to allocate a new modify header context. So when the CT entry is freed, the right modify header context will be freed. And the panic of accessing error pointer is also fixed.

In npu driver, there is a memory corruption due to a use after free. This could lead to local denial of service in kernel.

A use-after-free flaw was found in the add_partition in block/partitions/core.c in the Linux kernel. A local attacker with user privileges could cause a denial of service on the system. The issue results from the lack of code cleanup when device_add call fails when adding a partition to the disk.

In the Linux kernel, the following vulnerability has been resolved: thermal/debugfs: Prevent use-after-free from occurring after cdev removal Since thermal_debug_cdev_remove() does not run under cdev->lock, it can run in parallel with thermal_debug_cdev_state_update() and it may free the struct thermal_debugfs object used by the latter after it has been checked against NULL. If that happens, thermal_debug_cdev_state_update() will access memory that has been freed already causing the kernel to crash. Address this by using cdev->lock in thermal_debug_cdev_remove() around the cdev->debugfs value check (in case the same cdev is removed at the same time in two different threads) and its reset to NULL. Cc :6.8+ <stable@vger.kernel.org> # 6.8+

In the Linux kernel, the following vulnerability has been resolved: sctp: use call_rcu to free endpoint This patch is to delay the endpoint free by calling call_rcu() to fix another use-after-free issue in sctp_sock_dump(): BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20 Call Trace: __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] __lock_sock+0x203/0x350 net/core/sock.c:2253 lock_sock_nested+0xfe/0x120 net/core/sock.c:2774 lock_sock include/net/sock.h:1492 [inline] sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324 sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091 sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527 __inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049 inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065 netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170 __sock_diag_cmd net/core/sock_diag.c:232 [inline] sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274 This issue occurs when asoc is peeled off and the old sk is freed after getting it by asoc->base.sk and before calling lock_sock(sk). To prevent the sk free, as a holder of the sk, ep should be alive when calling lock_sock(). This patch uses call_rcu() and moves sock_put and ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to hold the ep under rcu_read_lock in sctp_transport_traverse_process(). If sctp_endpoint_hold() returns true, it means this ep is still alive and we have held it and can continue to dump it; If it returns false, it means this ep is dead and can be freed after rcu_read_unlock, and we should skip it. In sctp_sock_dump(), after locking the sk, if this ep is different from tsp->asoc->ep, it means during this dumping, this asoc was peeled off before calling lock_sock(), and the sk should be skipped; If this ep is the same with tsp->asoc->ep, it means no peeloff happens on this asoc, and due to lock_sock, no peeloff will happen either until release_sock. Note that delaying endpoint free won't delay the port release, as the port release happens in sctp_endpoint_destroy() before calling call_rcu(). Also, freeing endpoint by call_rcu() makes it safe to access the sk by asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv(). Thanks Jones to bring this issue up. v1->v2: - improve the changelog. - add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed.

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_buffers: Fix memory corruptions on Spectrum-4 systems The following two shared buffer operations make use of the Shared Buffer Status Register (SBSR): # devlink sb occupancy snapshot pci/0000:01:00.0 # devlink sb occupancy clearmax pci/0000:01:00.0 The register has two masks of 256 bits to denote on which ingress / egress ports the register should operate on. Spectrum-4 has more than 256 ports, so the register was extended by cited commit with a new 'port_page' field. However, when filling the register's payload, the driver specifies the ports as absolute numbers and not relative to the first port of the port page, resulting in memory corruptions [1]. Fix by specifying the ports relative to the first port of the port page. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 Read of size 1 at addr ffff8881068cb00f by task devlink/1566 [...] Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 mlxsw_devlink_sb_occ_snapshot+0x75/0xb0 devlink_nl_sb_occ_snapshot_doit+0x1f9/0x2a0 genl_family_rcv_msg_doit+0x20c/0x300 genl_rcv_msg+0x567/0x800 netlink_rcv_skb+0x170/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x547/0x830 netlink_sendmsg+0x8d4/0xdb0 __sys_sendto+0x49b/0x510 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 copy_verifier_state+0xbc2/0xfb0 do_check_common+0x2c51/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x109/0x170 __kasan_slab_free+0x14/0x30 kfree+0xca/0x2b0 free_verifier_state+0xce/0x270 do_check_common+0x4828/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In drivers/media/dvb-core/dmxdev.c in the Linux kernel through 5.19.10, there is a use-after-free caused by refcount races, affecting dvb_demux_open and dvb_dmxdev_release.

Use after free issue in Xtra daemon shutdown due to static object instance getting freed from a multiple places in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, MDM9150, MDM9206, MDM9207C, MDM9607, MDM9650, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8996, MSM8996AU, MSM8998, Nicobar, QCS605, SDA660, SDA845, SDM450, SDM660, SDM670, SDM710, SDM845, SDX20, SDX24, SM6150, SM7150, SM8150, SM8250, SXR2130

In the Linux kernel, the following vulnerability has been resolved: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() irq_find_at_or_after() dereferences the interrupt descriptor which is returned by mt_find() while neither holding sparse_irq_lock nor RCU read lock, which means the descriptor can be freed between mt_find() and the dereference: CPU0 CPU1 desc = mt_find() delayed_free_desc(desc) irq_desc_get_irq(desc) The use-after-free is reported by KASAN: Call trace: irq_get_next_irq+0x58/0x84 show_stat+0x638/0x824 seq_read_iter+0x158/0x4ec proc_reg_read_iter+0x94/0x12c vfs_read+0x1e0/0x2c8 Freed by task 4471: slab_free_freelist_hook+0x174/0x1e0 __kmem_cache_free+0xa4/0x1dc kfree+0x64/0x128 irq_kobj_release+0x28/0x3c kobject_put+0xcc/0x1e0 delayed_free_desc+0x14/0x2c rcu_do_batch+0x214/0x720 Guard the access with a RCU read lock section.

The code in UEK6 U3 was missing an appropiate file descriptor count to be missing. This resulted in a use count error that allowed a file descriptor to a socket to be closed and freed while it was still in use by another portion of the kernel. An attack with local access can operate on the socket, and cause a denial of service. CVSS 3.1 Base Score 5.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H).

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach This is the candidate patch of CVE-2023-47233 : https://nvd.nist.gov/vuln/detail/CVE-2023-47233 In brcm80211 driver,it starts with the following invoking chain to start init a timeout worker: ->brcmf_usb_probe ->brcmf_usb_probe_cb ->brcmf_attach ->brcmf_bus_started ->brcmf_cfg80211_attach ->wl_init_priv ->brcmf_init_escan ->INIT_WORK(&cfg->escan_timeout_work, brcmf_cfg80211_escan_timeout_worker); If we disconnect the USB by hotplug, it will call brcmf_usb_disconnect to make cleanup. The invoking chain is : brcmf_usb_disconnect ->brcmf_usb_disconnect_cb ->brcmf_detach ->brcmf_cfg80211_detach ->kfree(cfg); While the timeout woker may still be running. This will cause a use-after-free bug on cfg in brcmf_cfg80211_escan_timeout_worker. Fix it by deleting the timer and canceling the worker in brcmf_cfg80211_detach. [arend.vanspriel@broadcom.com: keep timer delete as is and cancel work just before free]

A component of the HarmonyOS has a Use After Free vulnerability. Local attackers may exploit this vulnerability to cause kernel crash.

A flaw was found in SQLite's SELECT query functionality (src/select.c). This flaw allows an attacker who is capable of running SQL queries locally on the SQLite database to cause a denial of service or possible code execution by triggering a use-after-free. The highest threat from this vulnerability is to system availability.

Use after free in some Intel(R) Graphics Driver before version 27.20.100.8336, 15.45.33.5164, and 15.40.47.5166 may allow an authenticated user to potentially enable denial of service via local access.

Huawei smart phone Taurus-AL00B with versions earlier than 10.0.0.203(C00E201R7P2) have a use-after-free (UAF) vulnerability. An authenticated, local attacker may perform specific operations to exploit this vulnerability. Successful exploitation may tamper with the information to affect the availability.

In FreeBSD 12.1-STABLE before r364644, 11.4-STABLE before r364651, 12.1-RELEASE before p9, 11.4-RELEASE before p3, and 11.3-RELEASE before p13, improper handling in the kernel causes a use-after-free bug by sending large user messages from multiple threads on the same SCTP socket. The use-after-free situation may result in unintended kernel behaviour including a kernel panic.

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame() Fix a use-after-free that occurs in hcd when in_urb sent from pn533_usb_send_frame() is completed earlier than out_urb. Its callback frees the skb data in pn533_send_async_complete() that is used as a transfer buffer of out_urb. Wait before sending in_urb until the callback of out_urb is called. To modify the callback of out_urb alone, separate the complete function of out_urb and ack_urb. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in dummy_timer Call Trace: memcpy (mm/kasan/shadow.c:65) dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352) transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972) arch_static_branch (arch/x86/include/asm/jump_label.h:27) static_key_false (include/linux/jump_label.h:207) timer_expire_exit (include/trace/events/timer.h:127) call_timer_fn (kernel/time/timer.c:1475) expire_timers (kernel/time/timer.c:1519) __run_timers (kernel/time/timer.c:1790) run_timer_softirq (kernel/time/timer.c:1803)

In 11.4-PRERELEASE before r360733 and 11.3-RELEASE before p13, improper mbuf handling in the kernel causes a use-after-free bug by sending IPv6 Hop-by-Hop options over the loopback interface. The use-after-free situation may result in unintended kernel behaviour including a kernel panic.

An issue was discovered in the xcb crate through 2020-12-10 for Rust. base::Error does not have soundness. Because of the public ptr field, a use-after-free or double-free can occur.

An issue was discovered in the pyo3 crate before 0.12.4 for Rust. There is a reference-counting error and use-after-free in From<Py<T>>.

In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Prevent UAF in proc_cpuset_show() An UAF can happen when /proc/cpuset is read as reported in [1]. This can be reproduced by the following methods: 1.add an mdelay(1000) before acquiring the cgroup_lock In the cgroup_path_ns function. 2.$cat /proc/<pid>/cpuset repeatly. 3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/ $umount /sys/fs/cgroup/cpuset/ repeatly. The race that cause this bug can be shown as below: (umount) | (cat /proc/<pid>/cpuset) css_release | proc_cpuset_show css_release_work_fn | css = task_get_css(tsk, cpuset_cgrp_id); css_free_rwork_fn | cgroup_path_ns(css->cgroup, ...); cgroup_destroy_root | mutex_lock(&cgroup_mutex); rebind_subsystems | cgroup_free_root | | // cgrp was freed, UAF | cgroup_path_ns_locked(cgrp,..); When the cpuset is initialized, the root node top_cpuset.css.cgrp will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated &cgroup_root.cgrp. When the umount operation is executed, top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp. The problem is that when rebinding to cgrp_dfl_root, there are cases where the cgroup_root allocated by setting up the root for cgroup v1 is cached. This could lead to a Use-After-Free (UAF) if it is subsequently freed. The descendant cgroups of cgroup v1 can only be freed after the css is released. However, the css of the root will never be released, yet the cgroup_root should be freed when it is unmounted. This means that obtaining a reference to the css of the root does not guarantee that css.cgrp->root will not be freed. Fix this problem by using rcu_read_lock in proc_cpuset_show(). As cgroup_root is kfree_rcu after commit d23b5c577715 ("cgroup: Make operations on the cgroup root_list RCU safe"), css->cgroup won't be freed during the critical section. To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to replace task_get_css with task_css. [1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd

In the Linux kernel, the following vulnerability has been resolved: phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered The power_supply frame-work is not really designed for there to be long living in kernel references to power_supply devices. Specifically unregistering a power_supply while some other code has a reference to it triggers a WARN in power_supply_unregister(): WARN_ON(atomic_dec_return(&psy->use_cnt)); Folllowed by the power_supply still getting removed and the backing data freed anyway, leaving the tusb1210 charger-detect code with a dangling reference, resulting in a crash the next time tusb1210_get_online() is called. Fix this by only holding the reference in tusb1210_get_online() freeing it at the end of the function. Note this still leaves a theoretical race window, but it avoids the issue when manually rmmod-ing the charger chip driver during development.

In the Linux kernel, the following vulnerability has been resolved: drm/hisilicon/hibmc: fix irq_request()'s irq name variable is local The local variable is passed in request_irq (), and there will be use after free problem, which will make request_irq failed. Using the global irq name instead of it to fix.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Refuse to evaluate a method if arguments are missing As reported in [1], a platform firmware update that increased the number of method parameters and forgot to update a least one of its callers, caused ACPICA to crash due to use-after-free. Since this a result of a clear AML issue that arguably cannot be fixed up by the interpreter (it cannot produce missing data out of thin air), address it by making ACPICA refuse to evaluate a method if the caller attempts to pass fewer arguments than expected to it.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid UAF in f2fs_sync_inode_meta() syzbot reported an UAF issue as below: [1] [2] [1] https://syzkaller.appspot.com/text?tag=CrashReport&x=16594c60580000 ================================================================== BUG: KASAN: use-after-free in __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62 Read of size 8 at addr ffff888100567dc8 by task kworker/u4:0/8 CPU: 1 PID: 8 Comm: kworker/u4:0 Tainted: G W 6.1.129-syzkaller-00017-g642656a36791 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Workqueue: writeback wb_workfn (flush-7:0) Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x151/0x1b7 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:316 [inline] print_report+0x158/0x4e0 mm/kasan/report.c:427 kasan_report+0x13c/0x170 mm/kasan/report.c:531 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:351 __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62 __list_del_entry include/linux/list.h:134 [inline] list_del_init include/linux/list.h:206 [inline] f2fs_inode_synced+0x100/0x2e0 fs/f2fs/super.c:1553 f2fs_update_inode+0x72/0x1c40 fs/f2fs/inode.c:588 f2fs_update_inode_page+0x135/0x170 fs/f2fs/inode.c:706 f2fs_write_inode+0x416/0x790 fs/f2fs/inode.c:734 write_inode fs/fs-writeback.c:1460 [inline] __writeback_single_inode+0x4cf/0xb80 fs/fs-writeback.c:1677 writeback_sb_inodes+0xb32/0x1910 fs/fs-writeback.c:1903 __writeback_inodes_wb+0x118/0x3f0 fs/fs-writeback.c:1974 wb_writeback+0x3da/0xa00 fs/fs-writeback.c:2081 wb_check_background_flush fs/fs-writeback.c:2151 [inline] wb_do_writeback fs/fs-writeback.c:2239 [inline] wb_workfn+0xbba/0x1030 fs/fs-writeback.c:2266 process_one_work+0x73d/0xcb0 kernel/workqueue.c:2299 worker_thread+0xa60/0x1260 kernel/workqueue.c:2446 kthread+0x26d/0x300 kernel/kthread.c:386 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Allocated by task 298: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x4b/0x70 mm/kasan/common.c:52 kasan_save_alloc_info+0x1f/0x30 mm/kasan/generic.c:505 __kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:333 kasan_slab_alloc include/linux/kasan.h:202 [inline] slab_post_alloc_hook+0x53/0x2c0 mm/slab.h:768 slab_alloc_node mm/slub.c:3421 [inline] slab_alloc mm/slub.c:3431 [inline] __kmem_cache_alloc_lru mm/slub.c:3438 [inline] kmem_cache_alloc_lru+0x102/0x270 mm/slub.c:3454 alloc_inode_sb include/linux/fs.h:3255 [inline] f2fs_alloc_inode+0x2d/0x350 fs/f2fs/super.c:1437 alloc_inode fs/inode.c:261 [inline] iget_locked+0x18c/0x7e0 fs/inode.c:1373 f2fs_iget+0x55/0x4ca0 fs/f2fs/inode.c:486 f2fs_lookup+0x3c1/0xb50 fs/f2fs/namei.c:484 __lookup_slow+0x2b9/0x3e0 fs/namei.c:1689 lookup_slow+0x5a/0x80 fs/namei.c:1706 walk_component+0x2e7/0x410 fs/namei.c:1997 lookup_last fs/namei.c:2454 [inline] path_lookupat+0x16d/0x450 fs/namei.c:2478 filename_lookup+0x251/0x600 fs/namei.c:2507 vfs_statx+0x107/0x4b0 fs/stat.c:229 vfs_fstatat fs/stat.c:267 [inline] vfs_lstat include/linux/fs.h:3434 [inline] __do_sys_newlstat fs/stat.c:423 [inline] __se_sys_newlstat+0xda/0x7c0 fs/stat.c:417 __x64_sys_newlstat+0x5b/0x70 fs/stat.c:417 x64_sys_call+0x52/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:7 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3b/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x68/0xd2 Freed by task 0: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x4b/0x70 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:516 ____kasan_slab_free+0x131/0x180 mm/kasan/common.c:241 __kasan_slab_free+0x11/0x20 mm/kasan/common.c:249 kasan_slab_free include/linux/kasan.h:178 [inline] slab_free_hook mm/slub.c:1745 [inline] slab_free_freelist_hook mm/slub.c:1771 [inline] slab_free mm/slub.c:3686 [inline] kmem_cache_free+0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/gem: Acquire references on GEM handles for framebuffers A GEM handle can be released while the GEM buffer object is attached to a DRM framebuffer. This leads to the release of the dma-buf backing the buffer object, if any. [1] Trying to use the framebuffer in further mode-setting operations leads to a segmentation fault. Most easily happens with driver that use shadow planes for vmap-ing the dma-buf during a page flip. An example is shown below. [ 156.791968] ------------[ cut here ]------------ [ 156.796830] WARNING: CPU: 2 PID: 2255 at drivers/dma-buf/dma-buf.c:1527 dma_buf_vmap+0x224/0x430 [...] [ 156.942028] RIP: 0010:dma_buf_vmap+0x224/0x430 [ 157.043420] Call Trace: [ 157.045898] <TASK> [ 157.048030] ? show_trace_log_lvl+0x1af/0x2c0 [ 157.052436] ? show_trace_log_lvl+0x1af/0x2c0 [ 157.056836] ? show_trace_log_lvl+0x1af/0x2c0 [ 157.061253] ? drm_gem_shmem_vmap+0x74/0x710 [ 157.065567] ? dma_buf_vmap+0x224/0x430 [ 157.069446] ? __warn.cold+0x58/0xe4 [ 157.073061] ? dma_buf_vmap+0x224/0x430 [ 157.077111] ? report_bug+0x1dd/0x390 [ 157.080842] ? handle_bug+0x5e/0xa0 [ 157.084389] ? exc_invalid_op+0x14/0x50 [ 157.088291] ? asm_exc_invalid_op+0x16/0x20 [ 157.092548] ? dma_buf_vmap+0x224/0x430 [ 157.096663] ? dma_resv_get_singleton+0x6d/0x230 [ 157.101341] ? __pfx_dma_buf_vmap+0x10/0x10 [ 157.105588] ? __pfx_dma_resv_get_singleton+0x10/0x10 [ 157.110697] drm_gem_shmem_vmap+0x74/0x710 [ 157.114866] drm_gem_vmap+0xa9/0x1b0 [ 157.118763] drm_gem_vmap_unlocked+0x46/0xa0 [ 157.123086] drm_gem_fb_vmap+0xab/0x300 [ 157.126979] drm_atomic_helper_prepare_planes.part.0+0x487/0xb10 [ 157.133032] ? lockdep_init_map_type+0x19d/0x880 [ 157.137701] drm_atomic_helper_commit+0x13d/0x2e0 [ 157.142671] ? drm_atomic_nonblocking_commit+0xa0/0x180 [ 157.147988] drm_mode_atomic_ioctl+0x766/0xe40 [...] [ 157.346424] ---[ end trace 0000000000000000 ]--- Acquiring GEM handles for the framebuffer's GEM buffer objects prevents this from happening. The framebuffer's cleanup later puts the handle references. Commit 1a148af06000 ("drm/gem-shmem: Use dma_buf from GEM object instance") triggers the segmentation fault easily by using the dma-buf field more widely. The underlying issue with reference counting has been present before. v2: - acquire the handle instead of the BO (Christian) - fix comment style (Christian) - drop the Fixes tag (Christian) - rename err_ gotos - add missing Link tag

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: prime: fix ttm_bo_delayed_delete oops Fix an oops in ttm_bo_delayed_delete which results from dererencing a dangling pointer: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP CPU: 4 UID: 0 PID: 1082 Comm: kworker/u65:2 Not tainted 6.14.0-rc4-00267-g505460b44513-dirty #216 Hardware name: LENOVO 82N6/LNVNB161216, BIOS GKCN65WW 01/16/2024 Workqueue: ttm ttm_bo_delayed_delete [ttm] RIP: 0010:dma_resv_iter_first_unlocked+0x55/0x290 Code: 31 f6 48 c7 c7 00 2b fa aa e8 97 bd 52 ff e8 a2 c1 53 00 5a 85 c0 74 48 e9 88 01 00 00 4c 89 63 20 4d 85 e4 0f 84 30 01 00 00 <41> 8b 44 24 10 c6 43 2c 01 48 89 df 89 43 28 e8 97 fd ff ff 4c 8b RSP: 0018:ffffbf9383473d60 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffffbf9383473d88 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffbf9383473d78 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 6b6b6b6b6b6b6b6b R13: ffffa003bbf78580 R14: ffffa003a6728040 R15: 00000000000383cc FS: 0000000000000000(0000) GS:ffffa00991c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000758348024dd0 CR3: 000000012c259000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x26 ? die_addr+0x3d/0x70 ? exc_general_protection+0x159/0x460 ? asm_exc_general_protection+0x27/0x30 ? dma_resv_iter_first_unlocked+0x55/0x290 dma_resv_wait_timeout+0x56/0x100 ttm_bo_delayed_delete+0x69/0xb0 [ttm] process_one_work+0x217/0x5c0 worker_thread+0x1c8/0x3d0 ? apply_wqattrs_cleanup.part.0+0xc0/0xc0 kthread+0x10b/0x240 ? kthreads_online_cpu+0x140/0x140 ret_from_fork+0x40/0x70 ? kthreads_online_cpu+0x140/0x140 ret_from_fork_asm+0x11/0x20 </TASK> The cause of this is: - drm_prime_gem_destroy calls dma_buf_put(dma_buf) which releases the reference to the shared dma_buf. The reference count is 0, so the dma_buf is destroyed, which in turn decrements the corresponding amdgpu_bo reference count to 0, and the amdgpu_bo is destroyed - calling drm_gem_object_release then dma_resv_fini (which destroys the reservation object), then finally freeing the amdgpu_bo. - nouveau_bo obj->bo.base.resv is now a dangling pointer to the memory formerly allocated to the amdgpu_bo. - nouveau_gem_object_del calls ttm_bo_put(&nvbo->bo) which calls ttm_bo_release, which schedules ttm_bo_delayed_delete. - ttm_bo_delayed_delete runs and dereferences the dangling resv pointer, resulting in a general protection fault. Fix this by moving the drm_prime_gem_destroy call from nouveau_gem_object_del to nouveau_bo_del_ttm. This ensures that it will be run after ttm_bo_delayed_delete.

In the Linux kernel, the following vulnerability has been resolved: io_uring/futex: ensure io_futex_wait() cleans up properly on failure The io_futex_data is allocated upfront and assigned to the io_kiocb async_data field, but the request isn't marked with REQ_F_ASYNC_DATA at that point. Those two should always go together, as the flag tells io_uring whether the field is valid or not. Additionally, on failure cleanup, the futex handler frees the data but does not clear ->async_data. Clear the data and the flag in the error path as well. Thanks to Trend Micro Zero Day Initiative and particularly ReDress for reporting this.

In the Linux kernel, the following vulnerability has been resolved: dm thin: fix use-after-free crash in dm_sm_register_threshold_callback Fault inject on pool metadata device reports: BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80 Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950 CPU: 7 PID: 950 Comm: dmsetup Tainted: G W 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_address_description.constprop.0.cold+0xeb/0x3f4 kasan_report.cold+0xe6/0x147 dm_pool_register_metadata_threshold+0x40/0x80 pool_ctr+0xa0a/0x1150 dm_table_add_target+0x2c8/0x640 table_load+0x1fd/0x430 ctl_ioctl+0x2c4/0x5a0 dm_ctl_ioctl+0xa/0x10 __x64_sys_ioctl+0xb3/0xd0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This can be easily reproduced using: echo offline > /sys/block/sda/device/state dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10 dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0" If a metadata commit fails, the transaction will be aborted and the metadata space maps will be destroyed. If a DM table reload then happens for this failed thin-pool, a use-after-free will occur in dm_sm_register_threshold_callback (called from dm_pool_register_metadata_threshold). Fix this by in dm_pool_register_metadata_threshold() by returning the -EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr() with a new error message: "Error registering metadata threshold".