Stack-based buffer overflow in BreakPoint Software Hex Workshop 4.23, 6.0.1.4603, and other 6.x and earlier versions allows remote attackers to execute arbitrary code via a crafted Intel Hex Code (.hex) file. NOTE: some of these details are obtained from third party information.

Buffer overflow in BreakPoint Software Hex Workshop 5.1.4 allows user-assisted attackers to cause a denial of service and possibly execute arbitrary code via a long mapping reference in a Color Mapping (.cmap) file.

In the Linux kernel, the following vulnerability has been resolved: libbpf: Use OPTS_SET() macro in bpf_xdp_query() When the feature_flags and xdp_zc_max_segs fields were added to the libbpf bpf_xdp_query_opts, the code writing them did not use the OPTS_SET() macro. This causes libbpf to write to those fields unconditionally, which means that programs compiled against an older version of libbpf (with a smaller size of the bpf_xdp_query_opts struct) will have its stack corrupted by libbpf writing out of bounds. The patch adding the feature_flags field has an early bail out if the feature_flags field is not part of the opts struct (via the OPTS_HAS) macro, but the patch adding xdp_zc_max_segs does not. For consistency, this fix just changes the assignments to both fields to use the OPTS_SET() macro.

In the Linux kernel, the following vulnerability has been resolved: smb: Fix regression in writes when non-standard maximum write size negotiated The conversion to netfs in the 6.3 kernel caused a regression when maximum write size is set by the server to an unexpected value which is not a multiple of 4096 (similarly if the user overrides the maximum write size by setting mount parm "wsize", but sets it to a value that is not a multiple of 4096). When negotiated write size is not a multiple of 4096 the netfs code can skip the end of the final page when doing large sequential writes, causing data corruption. This section of code is being rewritten/removed due to a large netfs change, but until that point (ie for the 6.3 kernel until now) we can not support non-standard maximum write sizes. Add a warning if a user specifies a wsize on mount that is not a multiple of 4096 (and round down), also add a change where we round down the maximum write size if the server negotiates a value that is not a multiple of 4096 (we also have to check to make sure that we do not round it down to zero).

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix data corruption in dsync block recovery for small block sizes The helper function nilfs_recovery_copy_block() of nilfs_recovery_dsync_blocks(), which recovers data from logs created by data sync writes during a mount after an unclean shutdown, incorrectly calculates the on-page offset when copying repair data to the file's page cache. In environments where the block size is smaller than the page size, this flaw can cause data corruption and leak uninitialized memory bytes during the recovery process. Fix these issues by correcting this byte offset calculation on the page.

In the Linux kernel, the following vulnerability has been resolved: dm-crypt, dm-verity: disable tasklets Tasklets have an inherent problem with memory corruption. The function tasklet_action_common calls tasklet_trylock, then it calls the tasklet callback and then it calls tasklet_unlock. If the tasklet callback frees the structure that contains the tasklet or if it calls some code that may free it, tasklet_unlock will write into free memory. The commits 8e14f610159d and d9a02e016aaf try to fix it for dm-crypt, but it is not a sufficient fix and the data corruption can still happen [1]. There is no fix for dm-verity and dm-verity will write into free memory with every tasklet-processed bio. There will be atomic workqueues implemented in the kernel 6.9 [2]. They will have better interface and they will not suffer from the memory corruption problem. But we need something that stops the memory corruption now and that can be backported to the stable kernels. So, I'm proposing this commit that disables tasklets in both dm-crypt and dm-verity. This commit doesn't remove the tasklet support, because the tasklet code will be reused when atomic workqueues will be implemented. [1] https://lore.kernel.org/all/d390d7ee-f142-44d3-822a-87949e14608b@suse.de/T/ [2] https://lore.kernel.org/lkml/20240130091300.2968534-1-tj@kernel.org/

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: Add protection for bmp length out of range UBSAN load reports an exception of BRK#5515 SHIFT_ISSUE:Bitwise shifts that are out of bounds for their data type. vmlinux get_bitmap(b=75) + 712 <net/netfilter/nf_conntrack_h323_asn1.c:0> vmlinux decode_seq(bs=0xFFFFFFD008037000, f=0xFFFFFFD008037018, level=134443100) + 1956 <net/netfilter/nf_conntrack_h323_asn1.c:592> vmlinux decode_choice(base=0xFFFFFFD0080370F0, level=23843636) + 1216 <net/netfilter/nf_conntrack_h323_asn1.c:814> vmlinux decode_seq(f=0xFFFFFFD0080371A8, level=134443500) + 812 <net/netfilter/nf_conntrack_h323_asn1.c:576> vmlinux decode_choice(base=0xFFFFFFD008037280, level=0) + 1216 <net/netfilter/nf_conntrack_h323_asn1.c:814> vmlinux DecodeRasMessage() + 304 <net/netfilter/nf_conntrack_h323_asn1.c:833> vmlinux ras_help() + 684 <net/netfilter/nf_conntrack_h323_main.c:1728> vmlinux nf_confirm() + 188 <net/netfilter/nf_conntrack_proto.c:137> Due to abnormal data in skb->data, the extension bitmap length exceeds 32 when decoding ras message then uses the length to make a shift operation. It will change into negative after several loop. UBSAN load could detect a negative shift as an undefined behaviour and reports exception. So we add the protection to avoid the length exceeding 32. Or else it will return out of range error and stop decoding.

In the Linux kernel, the following vulnerability has been resolved: x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section The .compat section is a dummy PE section that contains the address of the 32-bit entrypoint of the 64-bit kernel image if it is bootable from 32-bit firmware (i.e., CONFIG_EFI_MIXED=y) This section is only 8 bytes in size and is only referenced from the loader, and so it is placed at the end of the memory view of the image, to avoid the need for padding it to 4k, which is required for sections appearing in the middle of the image. Unfortunately, this violates the PE/COFF spec, and even if most EFI loaders will work correctly (including the Tianocore reference implementation), PE loaders do exist that reject such images, on the basis that both the file and memory views of the file contents should be described by the section headers in a monotonically increasing manner without leaving any gaps. So reorganize the sections to avoid this issue. This results in a slight padding overhead (< 4k) which can be avoided if desired by disabling CONFIG_EFI_MIXED (which is only needed in rare cases these days)

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate payload size in ipc response If installing malicious ksmbd-tools, ksmbd.mountd can return invalid ipc response to ksmbd kernel server. ksmbd should validate payload size of ipc response from ksmbd.mountd to avoid memory overrun or slab-out-of-bounds. This patch validate 3 ipc response that has payload.

In download.c there is a special mode allowing user to download data into memory and causing possible memory corruptions due to missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.

Stack-based buffer overflow in CoolType.dll in Adobe Reader and Acrobat 9.x before 9.4, and 8.x before 8.2.5 on Windows and Mac OS X, allows remote attackers to execute arbitrary code or cause a denial of service (application crash) via a PDF document with a long field in a Smart INdependent Glyphlets (SING) table in a TTF font, as exploited in the wild in September 2010. NOTE: some of these details are obtained from third party information.

In the Linux kernel, the following vulnerability has been resolved: parisc: Fix random data corruption from exception handler The current exception handler implementation, which assists when accessing user space memory, may exhibit random data corruption if the compiler decides to use a different register than the specified register %r29 (defined in ASM_EXCEPTIONTABLE_REG) for the error code. If the compiler choose another register, the fault handler will nevertheless store -EFAULT into %r29 and thus trash whatever this register is used for. Looking at the assembly I found that this happens sometimes in emulate_ldd(). To solve the issue, the easiest solution would be if it somehow is possible to tell the fault handler which register is used to hold the error code. Using %0 or %1 in the inline assembly is not posssible as it will show up as e.g. %r29 (with the "%r" prefix), which the GNU assembler can not convert to an integer. This patch takes another, better and more flexible approach: We extend the __ex_table (which is out of the execution path) by one 32-word. In this word we tell the compiler to insert the assembler instruction "or %r0,%r0,%reg", where %reg references the register which the compiler choosed for the error return code. In case of an access failure, the fault handler finds the __ex_table entry and can examine the opcode. The used register is encoded in the lowest 5 bits, and the fault handler can then store -EFAULT into this register. Since we extend the __ex_table to 3 words we can't use the BUILDTIME_TABLE_SORT config option any longer.

In the Linux kernel, the following vulnerability has been resolved: xhci: handle isoc Babble and Buffer Overrun events properly xHCI 4.9 explicitly forbids assuming that the xHC has released its ownership of a multi-TRB TD when it reports an error on one of the early TRBs. Yet the driver makes such assumption and releases the TD, allowing the remaining TRBs to be freed or overwritten by new TDs. The xHC should also report completion of the final TRB due to its IOC flag being set by us, regardless of prior errors. This event cannot be recognized if the TD has already been freed earlier, resulting in "Transfer event TRB DMA ptr not part of current TD" error message. Fix this by reusing the logic for processing isoc Transaction Errors. This also handles hosts which fail to report the final completion. Fix transfer length reporting on Babble errors. They may be caused by device malfunction, no guarantee that the buffer has been filled.

IBM SPSS Statistics for Windows 24.0, 25.0, 26.0, 27.0, 27.0.1, and 28.0 could allow a local user to cause a denial of service by writing arbitrary files to admin protected directories on the system. IBM X-Force ID: 212046.

IBM Spectrum Protect Client 7.1 and 8.1 is vulnerable to a stack based buffer overflow, caused by improper bounds checking. A local attacker could exploit this vulnerability and cause a denial of service. IBM X-Force ID: 214438.

Out-of-Bounds Write vulnerability in Jungo WinDriver before 12.6.0 allows local attackers to cause a Windows blue screen error and Denial of Service (DoS).

Out-of-Bounds Write vulnerability in Jungo WinDriver before 12.5.1 allows local attackers to cause a Windows blue screen error and Denial of Service (DoS).

In the Linux kernel, the following vulnerability has been resolved: Both cadence-quadspi ->runtime_suspend() and ->runtime_resume() implementations start with: struct cqspi_st *cqspi = dev_get_drvdata(dev); struct spi_controller *host = dev_get_drvdata(dev); This obviously cannot be correct, unless "struct cqspi_st" is the first member of " struct spi_controller", or the other way around, but it is not the case. "struct spi_controller" is allocated by devm_spi_alloc_host(), which allocates an extra amount of memory for private data, used to store "struct cqspi_st". The ->probe() function of the cadence-quadspi driver then sets the device drvdata to store the address of the "struct cqspi_st" structure. Therefore: struct cqspi_st *cqspi = dev_get_drvdata(dev); is correct, but: struct spi_controller *host = dev_get_drvdata(dev); is not, as it makes "host" point not to a "struct spi_controller" but to the same "struct cqspi_st" structure as above. This obviously leads to bad things (memory corruption, kernel crashes) directly during ->probe(), as ->probe() enables the device using PM runtime, leading the ->runtime_resume() hook being called, which in turns calls spi_controller_resume() with the wrong pointer. This has at least been reported [0] to cause a kernel crash, but the exact behavior will depend on the memory contents. [0] https://lore.kernel.org/all/20240226121803.5a7r5wkpbbowcxgx@dhruva/ This issue potentially affects all platforms that are currently using the cadence-quadspi driver.

A Heap-based Buffer Overflow vulnerability in the Network Services Daemon (NSD) of Juniper Networks Junos OS allows authenticated, low privileged, local attacker to cause a Denial of Service (DoS). On an SRX 5000 Series device, when executing a specific command repeatedly, memory is corrupted, which leads to a Flow Processing Daemon (flowd) crash. The NSD process has to be restarted to restore services. If this issue occurs, it can be checked with the following command: user@host> request security policies check The following log message can also be observed: Error: policies are out of sync for PFE node<number>.fpc<number>.pic<number>. This issue affects: Juniper Networks Junos OS on SRX 5000 Series * All versions earlier than 20.4R3-S6; * 21.1 versions earlier than 21.1R3-S5; * 21.2 versions earlier than 21.2R3-S4; * 21.3 versions earlier than 21.3R3-S3; * 21.4 versions earlier than 21.4R3-S3; * 22.1 versions earlier than 22.1R3-S1; * 22.2 versions earlier than 22.2R3; * 22.3 versions earlier than 22.3R2.

An issue was discovered on Samsung mobile devices with software through 2016-05-27 (Exynos AP chipsets). A local graphics user can cause a Kernel Crash via the fb0(DECON) frame buffer interface. The Samsung ID is SVE-2016-7011 (October 2016).

In the Linux kernel, the following vulnerability has been resolved: ntfs3: Add bounds checking to mi_enum_attr() Added bounds checking to make sure that every attr don't stray beyond valid memory region.

A third-party vulnerability exists in the Rockwell Automation Arena® that could allow a threat actor to write beyond the boundaries of allocated memory in a DOE file. If exploited, a threat actor could leverage this vulnerability to execute arbitrary code. To exploit this vulnerability, a legitimate user must execute the malicious code crafted by the threat actor.

An issue was discovered in the Linux kernel 5.4 and 5.5 through 5.5.6 on the AArch64 architecture. It ignores the top byte in the address passed to the brk system call, potentially moving the memory break downwards when the application expects it to move upwards, aka CID-dcde237319e6. This has been observed to cause heap corruption with the GNU C Library malloc implementation.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: cmd-db: Map shared memory as WC, not WB Linux does not write into cmd-db region. This region of memory is write protected by XPU. XPU may sometime falsely detect clean cache eviction as "write" into the write protected region leading to secure interrupt which causes an endless loop somewhere in Trust Zone. The only reason it is working right now is because Qualcomm Hypervisor maps the same region as Non-Cacheable memory in Stage 2 translation tables. The issue manifests if we want to use another hypervisor (like Xen or KVM), which does not know anything about those specific mappings. Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC removes dependency on correct mappings in Stage 2 tables. This patch fixes the issue by updating the mapping to MEMREMAP_WC. I tested this on SA8155P with Xen.

Heap-based buffer overflow vulnerability in Resource Hacker, developed by Angus Johnson, affecting version 3.6.0.92. This vulnerability could allow an attacker to execute arbitrary code via a long filename argument.

In the Linux kernel, the following vulnerability has been resolved: igb: cope with large MAX_SKB_FRAGS Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient.

A vulnerability was reported in the Open vSwitch sub-component in the Linux Kernel. The flaw occurs when a recursive operation of code push recursively calls into the code block. The OVS module does not validate the stack depth, pushing too many frames and causing a stack overflow. As a result, this can lead to a crash or other related issues.

A vulnerability was found in Nsasoft ShareAlarmPro 2.1.4 and classified as problematic. Affected by this issue is some unknown functionality of the component Registration Handler. The manipulation of the argument Name/Key leads to memory corruption. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251672. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Any-Capture Any Sound Recorder 2.93. It has been declared as problematic. This vulnerability affects unknown code of the component Registration Handler. The manipulation of the argument User Name/Key Code leads to memory corruption. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. VDB-251674 is the identifier assigned to this vulnerability.

Out-of-bounds array write in Xpdf 4.05 and earlier, triggered by an invalid character code in a Type 1 font. The root problem was a bounds check that was being optimized away by modern compilers.

Delta Electronics CNCSoft lacks proper validation of the user-supplied file. If a user opens a malicious file, an attacker can leverage this vulnerability to execute code in the context of the current process.

Delta Electronics CNCSoft lacks proper validation of the user-supplied file. If a user opens a malicious file, an attacker can leverage this vulnerability to execute code in the context of the current process.

Buffer overflow vulnerability in Explorer++ affecting version 1.3.5.531. A local attacker could execute arbitrary code via a long filename argument by monitoring Structured Exception Handler (SEH) records.

A buffer overflow vulnerability has been found in XAMPP affecting version 8.2.4 and earlier. An attacker could execute arbitrary code through a long file debug argument that controls the Structured Exception Handler (SEH).

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer handler, where an unprivileged user can cause improper restriction of operations within the bounds of a memory buffer cause an out-of-bounds read, which may lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: btrfs: prevent copying too big compressed lzo segment Compressed length can be corrupted to be a lot larger than memory we have allocated for buffer. This will cause memcpy in copy_compressed_segment to write outside of allocated memory. This mostly results in stuck read syscall but sometimes when using btrfs send can get #GP kernel: general protection fault, probably for non-canonical address 0x841551d5c1000: 0000 [#1] PREEMPT SMP NOPTI kernel: CPU: 17 PID: 264 Comm: kworker/u256:7 Tainted: P OE 5.17.0-rc2-1 #12 kernel: Workqueue: btrfs-endio btrfs_work_helper [btrfs] kernel: RIP: 0010:lzo_decompress_bio (./include/linux/fortify-string.h:225 fs/btrfs/lzo.c:322 fs/btrfs/lzo.c:394) btrfs Code starting with the faulting instruction =========================================== 0:* 48 8b 06 mov (%rsi),%rax <-- trapping instruction 3: 48 8d 79 08 lea 0x8(%rcx),%rdi 7: 48 83 e7 f8 and $0xfffffffffffffff8,%rdi b: 48 89 01 mov %rax,(%rcx) e: 44 89 f0 mov %r14d,%eax 11: 48 8b 54 06 f8 mov -0x8(%rsi,%rax,1),%rdx kernel: RSP: 0018:ffffb110812efd50 EFLAGS: 00010212 kernel: RAX: 0000000000001000 RBX: 000000009ca264c8 RCX: ffff98996e6d8ff8 kernel: RDX: 0000000000000064 RSI: 000841551d5c1000 RDI: ffffffff9500435d kernel: RBP: ffff989a3be856c0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000000 R11: 0000000000001000 R12: ffff98996e6d8000 kernel: R13: 0000000000000008 R14: 0000000000001000 R15: 000841551d5c1000 kernel: FS: 0000000000000000(0000) GS:ffff98a09d640000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00001e9f984d9ea8 CR3: 000000014971a000 CR4: 00000000003506e0 kernel: Call Trace: kernel: <TASK> kernel: end_compressed_bio_read (fs/btrfs/compression.c:104 fs/btrfs/compression.c:1363 fs/btrfs/compression.c:323) btrfs kernel: end_workqueue_fn (fs/btrfs/disk-io.c:1923) btrfs kernel: btrfs_work_helper (fs/btrfs/async-thread.c:326) btrfs kernel: process_one_work (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:212 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2312) kernel: worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2455) kernel: ? process_one_work (kernel/workqueue.c:2397) kernel: kthread (kernel/kthread.c:377) kernel: ? kthread_complete_and_exit (kernel/kthread.c:332) kernel: ret_from_fork (arch/x86/entry/entry_64.S:301) kernel: </TASK>

In video decoder, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with no additional execution privileges needed

A vulnerability was found in PHP where setting the environment variable PHP_CLI_SERVER_WORKERS to a large value leads to a heap buffer overflow.

In the Linux kernel, the following vulnerability has been resolved: net: amd-xgbe: Fix skb data length underflow There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors.

A denial of service vulnerability was reported in Lenovo PCManager prior to version 4.0.20.10282 that could allow an attacker with local access to trigger a blue screen error.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix crash due to incorrect copy_map_value When both bpf_spin_lock and bpf_timer are present in a BPF map value, copy_map_value needs to skirt both objects when copying a value into and out of the map. However, the current code does not set both s_off and t_off in copy_map_value, which leads to a crash when e.g. bpf_spin_lock is placed in map value with bpf_timer, as bpf_map_update_elem call will be able to overwrite the other timer object. When the issue is not fixed, an overwriting can produce the following splat: [root@(none) bpf]# ./test_progs -t timer_crash [ 15.930339] bpf_testmod: loading out-of-tree module taints kernel. [ 16.037849] ================================================================== [ 16.038458] BUG: KASAN: user-memory-access in __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.038944] Write of size 8 at addr 0000000000043ec0 by task test_progs/325 [ 16.039399] [ 16.039514] CPU: 0 PID: 325 Comm: test_progs Tainted: G OE 5.16.0+ #278 [ 16.039983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014 [ 16.040485] Call Trace: [ 16.040645] <TASK> [ 16.040805] dump_stack_lvl+0x59/0x73 [ 16.041069] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.041427] kasan_report.cold+0x116/0x11b [ 16.041673] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042040] __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042328] ? memcpy+0x39/0x60 [ 16.042552] ? pv_hash+0xd0/0xd0 [ 16.042785] ? lockdep_hardirqs_off+0x95/0xd0 [ 16.043079] __bpf_spin_lock_irqsave+0xdf/0xf0 [ 16.043366] ? bpf_get_current_comm+0x50/0x50 [ 16.043608] ? jhash+0x11a/0x270 [ 16.043848] bpf_timer_cancel+0x34/0xe0 [ 16.044119] bpf_prog_c4ea1c0f7449940d_sys_enter+0x7c/0x81 [ 16.044500] bpf_trampoline_6442477838_0+0x36/0x1000 [ 16.044836] __x64_sys_nanosleep+0x5/0x140 [ 16.045119] do_syscall_64+0x59/0x80 [ 16.045377] ? lock_is_held_type+0xe4/0x140 [ 16.045670] ? irqentry_exit_to_user_mode+0xa/0x40 [ 16.046001] ? mark_held_locks+0x24/0x90 [ 16.046287] ? asm_exc_page_fault+0x1e/0x30 [ 16.046569] ? asm_exc_page_fault+0x8/0x30 [ 16.046851] ? lockdep_hardirqs_on+0x7e/0x100 [ 16.047137] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.047405] RIP: 0033:0x7f9e4831718d [ 16.047602] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 16.048764] RSP: 002b:00007fff488086b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000023 [ 16.049275] RAX: ffffffffffffffda RBX: 00007f9e48683740 RCX: 00007f9e4831718d [ 16.049747] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007fff488086d0 [ 16.050225] RBP: 00007fff488086f0 R08: 00007fff488085d7 R09: 00007f9e4cb594a0 [ 16.050648] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f9e484cde30 [ 16.051124] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 16.051608] </TASK> [ 16.051762] ==================================================================

In wifi service, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with no additional execution privileges needed

In wifi service, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with no additional execution privileges needed

In wifi service, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with no additional execution privileges needed

In wlan driver, there is a possible missing params check. This could lead to local denial of service in wlan services.

In FM service , there is a possible missing params check. This could lead to local denial of service in FM service .

In wlan driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in wlan services.

In wlan driver, there is a possible missing params check. This could lead to local denial of service in wlan services.

In h265 codec firmware, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with no additional execution privileges.

In media service, there is a missing permission check. This could lead to local denial of service in media service.