An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. There is an information disclosure vulnerability via requests for the router_info.xml document. This will reveal the PIN code, MAC address, routing table, firmware version, update time, QOS information, LAN information, and WLAN information of the device.
D-Link DIR-815 devices with firmware before 2.07.B01 allow remote attackers to obtain sensitive information by leveraging cleartext storage of the administrative password.
The web/web_file/fb_publish.php script in D-Link DNS-320L before 1.04b12 and DNS-327L before 1.03b04 Build0119 does not authenticate requests, which allows remote attackers to obtain arbitrary photos and publish them to an arbitrary Facebook profile via a target album_id and access_token.
An issue was discovered in /bin/goahead on D-Link DIR-823G devices with firmware 1.02B03. There is incorrect access control allowing remote attackers to get sensitive information (such as MAC address) about all clients in the WLAN via the GetClientInfo HNAP API. Consequently, an attacker can achieve information disclosure without authentication.
index.cgi in D-Link DAP-1360 with firmware 2.5.4 and earlier allows remote attackers to bypass authentication and obtain sensitive information by setting the client_login cookie to admin.
A vulnerability has been found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. This vulnerability affects the function sub_41F0FC of the file /H5/webgl.data. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability has been found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /install_base.data. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability, which was classified as problematic, has been found in D-Link DI-7003GV2 24.04.18D1 R(68125). This issue affects some unknown processing of the file /H5/get_version.data of the component Configuration Handler. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability, which was classified as problematic, was found in D-Link DI-7003GV2 24.04.18D1 R(68125). Affected is an unknown function of the file /index.data. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability classified as critical was found in D-Link DAP-1360, DIR-300, DIR-615, DIR-615GF, DIR-615S, DIR-615T, DIR-620, DIR-620S, DIR-806A, DIR-815, DIR-815AC, DIR-815S, DIR-816, DIR-820, DIR-822, DIR-825, DIR-825AC, DIR-825ACF, DIR-825ACG1, DIR-841, DIR-842, DIR-842S, DIR-843, DIR-853, DIR-878, DIR-882, DIR-1210, DIR-1260, DIR-2150, DIR-X1530, DIR-X1860, DSL-224, DSL-245GR, DSL-2640U, DSL-2750U, DSL-G2452GR, DVG-5402G, DVG-5402G, DVG-5402GFRU, DVG-N5402G, DVG-N5402G-IL, DWM-312W, DWM-321, DWR-921, DWR-953 and Good Line Router v2 up to 20240112. This vulnerability affects unknown code of the file /devinfo of the component HTTP GET Request Handler. The manipulation of the argument area with the input notice|net|version leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-251542 is the identifier assigned to this vulnerability.
A security flaw has been discovered in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected is the function Webdav_Access_List of the file /cgi-bin/file_center.cgi. Performing a manipulation of the argument cmd results in improper access controls. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.
An Information Disclosure vulnerability exists due to a failure to restrict access on the lums.cgi script when processing a live video stream in D-LINK An Information Disclosure vulnerability exists due to a failure to restrict access on the lums.cgi script when processing a live video stream in D-LINK WCS-1100 1.02, TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-7510 1.00, DCS-7410 1.00, DCS-6410 1.00, DCS-5635 1.01, DCS-5605 1.01, DCS-5230L 1.02, DCS-5230 1.02, DCS-3430 1.02, DCS-3411 1.02, DCS-3410 1.02, DCS-2121 1.06_FR, DCS-2121 1.06, DCS-2121 1.05_RU, DCS-2102 1.06_FR, DCS-2102 1.06, DCS-2102 1.05_RU, DCS-1130L 1.04, DCS-1130 1.04_US, DCS-1130 1.03, DCS-1100L 1.04, DCS-1100 1.04_US, and DCS-1100 1.03, which could let a malicious user obtain sensitive information. which could let a malicious user obtain sensitive information.
An Information Disclosure vulnerability exists due to insufficient validation of authentication cookies for the RTSP session in D-Link DCS-5635 1.01, DCS-1100L 1.04, DCS-1130L 1.04, DCS-1100 1.03/1.04_US, DCS-1130 1.03/1.04_US , DCS-2102 1.05_RU/1.06/1.06_FR/1.05_TESCO, DCS-2121 1.05_RU/1.06/1.06_FR/1.05_TESCO, DCS-3410 1.02, DCS-5230 1.02, DCS-5230L 1.02, DCS-6410 1.0, DCS-7410 1.0, DCS-7510 1.0, and WCS-1100 1.02, which could let a malicious user obtain unauthorized access to video streams.
Incorrect access control in the Maintenance module of D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 allows authenticated attackers with low-level privileges to arbitrarily change the high-privileged account passwords and escalate privileges.
An information disclosure vulnerability exists in the Zebra IP Routing Manager functionality of D-LINK DIR-3040 1.13B03. A specially crafted network request can lead to the disclosure of sensitive information. An attacker can send a sequence of requests to trigger this vulnerability.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DNS-320L, DNS-320LW and DNS-327L up to 20240403 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/info.cgi of the component HTTP GET Request Handler. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-259285 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.
A vulnerability was identified in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The impacted element is the function cgi_get_ipv6 of the file /cgi-bin/network_mgr.cgi. Such manipulation leads to improper access controls. The exploit is publicly available and might be used.
D-Link DCS series Wi-Fi cameras expose sensitive information regarding the device configuration. The affected devices include many of DCS series, such as: DCS-936L, DCS-942L, DCS-8000LH, DCS-942LB1, DCS-5222L, DCS-825L, DCS-2630L, DCS-820L, DCS-855L, DCS-2121, DCS-5222LB1, DCS-5020L, and many more. There are many affected firmware versions starting from 1.00 and above. The configuration file can be accessed remotely through: <Camera-IP>/common/info.cgi, with no authentication. The configuration file include the following fields: model, product, brand, version, build, hw_version, nipca version, device name, location, MAC address, IP address, gateway IP address, wireless status, input/output settings, speaker, and sensor settings.
A vulnerability was detected in D-Link DIR-803 up to 1.04. Impacted is an unknown function of the file /getcfg.php of the component Configuration Handler. The manipulation of the argument AUTHORIZED_GROUP results in information disclosure. The attack may be performed from remote. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability was identified in D-Link DIR-852 up to 1.00CN B09. Affected by this vulnerability is the function phpcgi_main of the file /getcfg.php of the component Device Configuration Handler. Such manipulation leads to information disclosure. The attack may be performed from remote. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability classified as problematic has been found in D-Link DIR-878 1.03. Affected is an unknown function of the file /dllog.cgi of the component HTTP POST Request Handler. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability, which was classified as problematic, was found in D-Link DNS-320 2.02b01. This affects an unknown part of the file /cgi-bin/discovery.cgi of the component Web Management Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.
An issue was discovered on the D-Link DWR-932B router. qmiweb provides sensitive information for CfgType=get_homeCfg requests.
D-Link DSL-2875AL and DSL-2877AL devices through 1.00.05 are prone to information disclosure via a simple crafted request to index.asp on the web management server because of username_v and password_v variables.
D-Link R15 before v1.08.02 was discovered to contain no firewall restrictions for IPv6 traffic. This allows attackers to arbitrarily access any services running on the device that may be inadvertently listening via IPv6.
D-Link DGS-1510-28XMP, DGS-1510-28X, DGS-1510-52X, DGS-1510-52, DGS-1510-28P, DGS-1510-28, and DGS-1510-20 Websmart devices with firmware before 1.31.B003 allow attackers to conduct Unauthenticated Information Disclosure attacks via unspecified vectors.
A weakness has been identified in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. The affected element is an unknown function of the component DHCP Client Information Handler. Executing a manipulation can lead to information disclosure. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.
A security flaw has been discovered in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. Impacted is an unknown function of the component Wifi Setting Handler. Performing a manipulation results in information disclosure. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.
A security vulnerability has been detected in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. The impacted element is an unknown function of the file /wan_connection_status.asp of the component DHCP Connection Status Handler. The manipulation leads to information disclosure. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability, which was classified as problematic, has been found in D-Link DI-7003GV2 24.04.18D1 R(68125). Affected by this issue is the function sub_48F4F0 of the file /H5/versionupdate.data. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. Affected by this issue is some unknown functionality of the file /login.data. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
D-Link DIR-865L Ax 1.20B01 Beta devices have Cleartext Transmission of Sensitive Information.
An access control issue in D-Link DIR816L_FW206b01 allows unauthenticated attackers to access folders folder_view.php and category_view.php.
The web interface of the D-Link DVA-5592 20180823 is vulnerable to an authentication bypass that allows an unauthenticated user to have access to sensitive information such as the Wi-Fi password and the phone number (if VoIP is in use).
D-Link DIR-600 Rev Bx devices with v2.x firmware allow remote attackers to read passwords via a model/__show_info.php?REQUIRE_FILE= absolute path traversal attack, as demonstrated by discovering the admin password.
D-Link routers with the mydlink feature have some web interfaces without authentication requirements. An attacker can remotely obtain users' DNS query logs and login logs. Vulnerable targets include but are not limited to the latest firmware versions of DIR-817LW (A1-1.04), DIR-816L (B1-2.06), DIR-816 (B1-2.06?), DIR-850L (A1-1.09), and DIR-868L (A1-1.10).
D-Link DIR-100 4.03B07: security bypass via an error in the cliget.cgi script
An issue was discovered on the D-Link DWR-932B router. qmiweb allows file reading with ..%2f traversal.
There are some web interfaces without authentication requirements on D-Link DIR-412 A1-1.14WW routers. An attacker can get the router's log file via log_get.php, which could be used to discover the intranet network structure.
D-Link DIR-815 devices with firmware before 2.07.B01 allow remote attackers to obtain sensitive information by leveraging cleartext storage of the wireless key.
Local File Inclusion due to path traversal in D-Link DAP-1620 leads to unauthorized internal files reading [/etc/passwd] and [/etc/shadow].
An information disclosure in web interface in D-Link DIR-X1860 before 1.03 RevA1 allows a remote unauthenticated attacker to send a specially crafted HTTP request and gain knowledge of different absolute paths that are being used by the web application.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DIR-859 1.06B01. It has been rated as critical. Affected by this issue is some unknown functionality of the file /hedwig.cgi of the component HTTP POST Request Handler. The manipulation of the argument service with the input ../../../../htdocs/webinc/getcfg/DHCPS6.BRIDGE-1.xml leads to path traversal. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-251666 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.
D-Link Nuclias Connect firmware versions <= 1.3.1.4 contain an observable response discrepancy vulnerability. The application's 'Login' endpoint returns distinct JSON responses depending on whether the supplied username is associated with an existing account. Because the responses differ in the `error.message`string value, an unauthenticated remote attacker can enumerate valid usernames/accounts on the server. NOTE: D-Link states that a fix is under development.
An informtion disclosure issue exists in D-LINK-DIR-605 B2 Firmware Version : 2.01MT. An attacker can obtain a user name and password by forging a post request to the / getcfg.php page
D-Link Nuclias Connect firmware versions <= 1.3.1.4 contain an observable response discrepancy vulnerability. The application's 'Forgot Password' endpoint returns distinct JSON responses depending on whether the supplied email address is associated with an existing account. Because the responses differ in the `data.exist` boolean value, an unauthenticated remote attacker can enumerate valid email addresses/accounts on the server. NOTE: D-Link states that a fix is under development.
D-Link DVG-3104MS version 1.0.2.0.3, 1.0.2.0.4, and 1.0.2.0.4E contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values. NOTE: This vulnerability only affects products that are no longer supported by the maintainer
D-Link DVX-2000MS contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values.
An Authentication vulnerability exists in D-LINK WCS-1100 1.02, TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-7510 1.00, DCS-7410 1.00, DCS-6410 1.00, DCS-5635 1.01, DCS-5605 1.01, DCS-5230L 1.02, DCS-5230 1.02, DCS-3430 1.02, DCS-3411 1.02, DCS-3410 1.02, DCS-2121 1.06_FR, DCS-2121 1.06, DCS-2121 1.05_RU, DCS-2102 1.06_FR, DCS-2102 1.06, DCS-2102 1.05_RU, DCS-1130L 1.04, DCS-1130 1.04_US, DCS-1130 1.03, DCS-1100L 1.04, DCS-1100 1.04_US, and DCS-1100 1.03 due to hard-coded credentials that serve as a backdoor, which allows remote attackers to access the RTSP video stream.
An Authentication Bypass vulnerability exists in upnp/asf-mp4.asf when streaming live video in D-Link TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-2121 1.06_FR, 1.06, and 1.05_RU, DCS-2102 1.06_FR. 1.06, and 1.05_RU, which could let a malicious user obtain sensitive information.