A command injection vulnerability in the “show_zysync_server_contents” function of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands by sending a crafted HTTP POST request.
A command injection vulnerability in the access point (AP) management feature of the Zyxel ATP series firmware versions 5.00 through 5.36 Patch 2, USG FLEX series firmware versions 5.00 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 5.00 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 5.00 through 5.36 Patch 2, VPN series firmware versions 5.00 through 5.36 Patch 2, NXC2500 firmware versions 6.10(AAIG.0) through 6.10(AAIG.3), and NXC5500 firmware versions 6.10(AAOS.0) through 6.10(AAOS.4), could allow an unauthenticated, LAN-based attacker to execute some OS commands on an affected device if the attacker could trick an authorized administrator to add their IP address to the managed AP list in advance.
A command injection vulnerability in the hotspot management feature of the Zyxel ATP series firmware versions 4.60 through 5.36 Patch 2, USG FLEX series firmware versions 4.60 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 4.60 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 4.60 through 5.36 Patch 2, and VPN series firmware versions 4.60 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands on an affected device if the attacker could trick an authorized administrator to add their IP address to the list of trusted RADIUS clients in advance.
A post-authentication command injection vulnerability in the NTP feature of Zyxel NBG6604 firmware version V1.01(ABIR.1)C0 could allow an authenticated attacker to execute some OS commands remotely by sending a crafted HTTP request.
A command injection vulnerability in the configuration parser of the Zyxel ATP series firmware versions 5.10 through 5.36 Patch 2, USG FLEX series firmware versions 5.00 through 5.36 Patch 2, USG FLEX 50(W) series firmware versions 5.10 through 5.36 Patch 2, USG20(W)-VPN series firmware versions 5.10 through 5.36 Patch 2, and VPN series firmware versions 5.00 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands by using a crafted GRE configuration when the cloud management mode is enabled.
A command injection vulnerability in the UPnP function of the Zyxel EX3510-B0 firmware versions through 5.17(ABUP.15.1)C0 could allow a remote attacker to execute operating system (OS) commands on an affected device by sending specially crafted UPnP SOAP requests.
The configuration parser fails to sanitize user-controlled input in the Zyxel ATP series firmware versions 5.10 through 5.36, USG FLEX series firmware versions 5.00 through 5.36, USG FLEX 50(W) series firmware versions 5.10 through 5.36, USG20(W)-VPN series firmware versions 5.10 through 5.36, and VPN series firmware versions 5.00 through 5.36. An unauthenticated, LAN-based attacker could leverage the vulnerability to inject some operating system (OS) commands into the device configuration data on an affected device when the cloud management mode is enabled.
A post-authentication command injection vulnerability in the log file download function of the Zyxel EX3301-T0 firmware versions through 5.50(ABVY.7)C0 could allow an authenticated attacker to execute operating system (OS) commands on an affected device.
Improper error message handling in Zyxel ZyWALL/USG series firmware versions 4.60 through 4.73, VPN series firmware versions 4.60 through 5.35, USG FLEX series firmware versions 4.60 through 5.35, and ATP series firmware versions 4.60 through 5.35, which could allow an unauthenticated attacker to execute some OS commands remotely by sending crafted packets to an affected device.
The pre-authentication command injection vulnerability in the Zyxel NAS326 firmware versions prior to V5.21(AAZF.14)C0, NAS540 firmware versions prior to V5.21(AATB.11)C0, and NAS542 firmware versions prior to V5.21(ABAG.11)C0 could allow an unauthenticated attacker to execute some operating system (OS) commands remotely by sending a crafted HTTP request.
The post-authentication command injection vulnerability in the CLI command of Zyxel ATP series firmware versions 4.32 through 5.35, USG FLEX series firmware versions 4.50 through 5.35, USG FLEX 50(W) firmware versions 4.16 through 5.35, USG20(W)-VPN firmware versions 4.16 through 5.35, and VPN series firmware versions 4.30 through 5.35, which could allow an authenticated attacker to execute some OS commands remotely.
A post-authentication command injection vulnerability in the CGI program in the Zyxel GS1900-48 switch firmware version V2.80(AAHN.1)C0 and earlier could allow an authenticated, LAN-based attacker with administrator privileges to execute some operating system (OS) commands on an affected device by sending a crafted HTTP request.
** UNSUPPORTED WHEN ASSIGNED ** A command injection vulnerability in the functions formSysCmd(), formUpgradeCert(), and formDelcert() in the Zyxel NWA1100-N firmware version 1.00(AACE.1)C0 could allow an unauthenticated attacker to execute some OS commands to access system files on an affected device.
The ZyXEL Wireless N300 NetUSB NBG-419N router with firmware 1.00(BFQ.6)C0 allows remote attackers to execute arbitrary code via shell metacharacters in input to the (1) detectWeather, (2) set_language, (3) SystemCommand, or (4) NTPSyncWithHost function in management.c, or a (5) SET COUNTRY, (6) SET WLAN SSID, (7) SET WLAN CHANNEL, (8) SET WLAN STATUS, or (9) SET WLAN COUNTRY udps command.
The post-authentication command injection vulnerability in the Zyxel NBG6604 firmware version V1.01(ABIR.0)C0 could allow an authenticated attacker to execute some OS commands remotely by sending a crafted HTTP request.
A OS command injection vulnerability in the CGI program of Zyxel USG FLEX 100(W) firmware versions 5.00 through 5.21 Patch 1, USG FLEX 200 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 500 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 700 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 50(W) firmware versions 5.10 through 5.21 Patch 1, USG20(W)-VPN firmware versions 5.10 through 5.21 Patch 1, ATP series firmware versions 5.10 through 5.21 Patch 1, VPN series firmware versions 4.60 through 5.21 Patch 1, which could allow an attacker to modify specific files and then execute some OS commands on a vulnerable device.
An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.
A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
OpenClaw versions prior to 2026.2.22 contain an environment variable injection vulnerability in the system.run function that allows attackers to bypass command allowlist restrictions via SHELLOPTS and PS4 environment variables. An attacker who can invoke system.run with request-scoped environment variables can execute arbitrary shell commands outside the intended allowlisted command body through bash xtrace expansion.
OpenClaw versions prior to 2026.2.22 contain an authorization bypass vulnerability in allow-always wrapper persistence that allows attackers to bypass approval checks by persisting wrapper-level allowlist entries instead of validating inner executable intent. Remote attackers can approve benign wrapped system.run commands and subsequently execute different payloads without approval, enabling remote code execution on gateway and node-host execution flows.
A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
OS Command Injection vulnerability when changing date settings or hostname using web GUI of Nozomi Networks Guardian and CMC allows authenticated administrators to perform remote code execution. This issue affects: Nozomi Networks Guardian 20.0.7.3 version 20.0.7.3 and prior versions. Nozomi Networks CMC 20.0.7.3 version 20.0.7.3 and prior versions.
A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
A command injection vulnerability has been reported to affect QNAP device running Media Streaming add-on. If exploited, this vulnerability allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of Media Streaming add-on: QTS 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.5.4: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.3.6: Media Streaming add-on 430.1.8.12 ( 2021/08/20 ) and later QTS 4.3.3: Media Streaming add-on 430.1.8.12 ( 2021/09/29 ) and later QuTS-Hero 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later
A vulnerability was identified in DrayTek Vigor 300B up to 1.5.1.6. This affects the function cgiGetFile of the file /cgi-bin/mainfunction.cgi/uploadlangs of the component Web Management Interface. The manipulation of the argument File leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor confirms that "300B is EoL, and this is an authenticated vulnerability. We don't plan to fix it." This vulnerability only affects products that are no longer supported by the maintainer.
A security vulnerability has been detected in Tenda AC6 15.03.06.23. Affected by this issue is the function get_log_file of the file /goform/getLogFile of the component httpd. The manipulation of the argument wans.flag leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.
FreePBX is an open source IP PBX. From versions 16.0.17.2 to before 16.0.20 and from version 17.0.2.4 to before 17.0.5, a command injection vulnerability exists in FreePBX when using the ElevenLabs Text-to-Speech (TTS) engine in the recordings module. This issue has been patched in versions 16.0.20 and 17.0.5.
OS command injection in the admin web console of Ivanti CSA before version 5.0.5 allows a remote authenticated attacker with admin privileges to achieve remote code execution.
WeGIA is a web manager for charitable institutions. Prior to version 3.6.5, a critical Remote Code Execution (RCE) vulnerability exists in the WeGIA application's database restoration functionality. An attacker with administrative access (which can be obtained via the previously reported Authentication Bypass) can execute arbitrary OS commands on the server by uploading a backup file with a specifically crafted filename. Version 3.6.5 fixes the issue.
Tenda W20E V16.01.0.6(3392) is vulnerable to Command injection via cmd_get_ping_output.
A security vulnerability has been detected in UTT HiPER 520 1.7.7-160105. This impacts the function sub_44D264 of the file /goform/formPdbUpConfig of the component Web Management Interface. The manipulation of the argument policyNames leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.
Improper neutralization of inputs used in an OS command in the FSx Windows File Server volume mounting component in Amazon ECS Agent on Windows before version 1.103.0 might allow a remote authenticated threat actor to execute shell commands with SYSTEM privileges on the underlying host via a specially crafted username field in an ECS task definition. This issue requires permissions to register ECS task definitions or write to the Secrets Manager or SSM Parameter Store credentials used by the FSx volume configuration. To remediate this issue, users should upgrade to version 1.103.0.
An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78] in FortiManager version 7.6.0, version 7.4.4 and below, version 7.2.7 and below, version 7.0.12 and below, version 6.4.14 and below and FortiManager Cloud version 7.4.4 and below, version 7.2.7 to 7.2.1, version 7.0.12 to 7.0.1 may allow an authenticated remote attacker to execute unauthorized code via FGFM crafted requests.
A vulnerability was found in a Moodle TeX filter administrative setting where insufficient sanitization of configuration input could allow command injection. On sites where the TeX filter is enabled and ImageMagick is installed, a maliciously crafted setting value entered by an administrator could result in unintended system command execution. While exploitation requires administrative privileges, successful compromise could affect the entire Moodle server.
A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
A vulnerability has been identified in SINEC NMS (All versions < V1.0 SP2). The affected application incorrectly neutralizes special elements when creating batch operations which could lead to command injection. An authenticated remote attacker with administrative privileges could exploit this vulnerability to execute arbitrary code on the system with system privileges.
Budibase is a low code platform for creating internal tools, workflows, and admin panels. In 3.23.22 and earlier, the PostgreSQL integration constructs shell commands using user-controlled configuration values (database name, host, password, etc.) without proper sanitization. The password and other connection parameters are directly interpolated into a shell command. This affects packages/server/src/integrations/postgres.ts.
By abusing the 'install rpm url' command, an attacker can escape the restricted clish shell on affected versions of Ivanti MobileIron Core. This issue was fixed in version 11.1.0.0.
Blinko is an AI-powered card note-taking project. Prior to version 1.8.4, the MCP (Model Context Protocol) server creation function allows specifying arbitrary commands and arguments, which are executed when testing the connection. This issue has been patched in version 1.8.4.
Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. Successful exploits could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x: 6.10.7 and below and ClearPass Policy Manager 6.9.x: 6.9.12 and below.
Sewio’s Real-Time Location System (RTLS) Studio version 2.0.0 up to and including version 2.6.2 does not properly validate the input module name to the monitor services of the software. This could allow a remote attacker to access sensitive functions of the application and execute arbitrary system commands.
Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. Successful exploits could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x: 6.10.7 and below and ClearPass Policy Manager 6.9.x: 6.9.12 and below.
A command injection vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to execute arbitrary commands. We have already fixed the vulnerability in the following versions: QTS 5.2.9.3492 build 20260507 and later QuTS hero h5.2.9.3499 build 20260514 and later
Improper neutralization of special elements used in an OS command in SYNO.Core.Network.PPPoE in Synology DiskStation Manager (DSM) before 6.2.3-25426-3 allows remote authenticated users to execute arbitrary code via realname parameter.
A command injection vulnerability is present in Aruba Instant that permits an authenticated administrative user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. Workaround: None. Resolution: Fixed in Aruba Instant 4.2.4.12, 6.5.4.11, 8.3.0.6, and 8.4.0.0
An arbitrary code execution vulnerability exisits in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. The Check_TSSI function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious POST request to /apply.cgi to execute arbitrary commands on the underlying Linux operating system as root.
Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.6, LTS2025 release version 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.60 contain an OS command injection vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution as root.
An OS command injection vulnerability exists in XWEB Pro version 1.12.1 and prior, enabling an authenticated attacker to achieve remote code execution on the system by injecting malicious input into requests sent to the firmware update route.
An improper neutralization of special elements used in an OS Command vulnerability in the administrative interface of FortiMail before 6.4.4 may allow an authenticated attacker to execute unauthorized commands via specifically crafted HTTP requests.
A crafted configuration packet sent by an authenticated administrative user can be used to execute arbitrary commands in system context. This issue also affects installations of the VRM, DIVAR IP, BVMS with VRM installed, the VIDEOJET decoder (VJD-7513 and VJD-8000).