A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by including crafted arguments to specific commands on the local management CLI. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the log subscription subsystem of Cisco AsyncOS for the Cisco Secure Web Appliance (formerly Web Security Appliance) could allow an authenticated, local attacker to perform command injection and elevate privileges to root. This vulnerability is due to insufficient validation of user-supplied input for the web interface and CLI. An attacker could exploit this vulnerability by authenticating to the affected device and injecting scripting commands in the scope of the log subscription subsystem. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system and elevate privileges to root.

There is an OS command injection vulnerability in Crestron AM-300 firmware version 1.4499.00018 which may enable a user of a limited-access SSH session to escalate their privileges to root-level access.

Dell Unity, version(s) 5.4 and prior, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Code execution and Elevation of privileges.

A command injection issue in dji_sys in DJI Mavic 2 Remote Controller before firmware version 01.00.0510 allows for code execution via a malicious firmware upgrade packet.

The Tecno Camon iClick Android device with a build fingerprint of TECNO/H633/TECNO-IN6:8.1.0/O11019/A-180409V96:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.8). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to inject a command to the underlying operating system that will execute with root privileges upon the next reboot of the device. The authenticated user must have privileged EXEC permissions on the device. The vulnerability is due to insufficient protection of values passed to a script that executes during device startup. An attacker could exploit this vulnerability by writing values to a specific file. A successful exploit could allow the attacker to execute commands with root privileges each time the affected device is restarted.

The Tecno Camon iClick 2 Android device with a build fingerprint of TECNO/H622/TECNO-ID6:8.1.0/O11019/F-180824V116:user/release-keys contains a pre-installed platform app with a package name of com.lovelyfont.defcontainer (versionCode=7, versionName=7.0.11). This app contains an exported service named com.lovelyfont.manager.FontCoverService that allows any app co-located on the device to supply arbitrary commands via shell script to be executed as the system user that are triggered by writing an attacker-selected message to the logcat log. This app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as the system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), and obtains the user's text messages, and more. Executing commands as the system user can allow a third-party app to factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the GUI, change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, and obtains the user's text messages, and more.

Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. In version 4.0.0-beta.358 and possibly earlier versions, when creating or updating a "project," it is possible to inject arbitrary shell commands by altering the project name. If a name includes unescaped characters, such as single quotes (`'`), it breaks out of the intended command structure, allowing attackers to execute arbitrary commands on the host system. This vulnerability allows attackers to execute arbitrary commands on the host server, which could result in full system compromise; create, modify, or delete sensitive system files; and escalate privileges depending on the permissions of the executed process. Attackers with access to project management features could exploit this flaw to gain unauthorized control over the host environment. Version 4.0.0-beta.359 fixes this issue.

IBM InfoSphere Information Server 11.7 could allow a locally authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

fsa through 0.5.1 is vulnerable to Command Injection. The first argument of 'execGitCommand()', located within 'lib/rep.js#63' can be controlled by users without any sanitization to inject arbitrary commands.

iox in Cisco IOS, possibly 15.6 and earlier, and IOS XE, possibly 3.18 and earlier, allows local users to execute arbitrary IOx Linux commands on the guest OS via crafted iox command-line options, aka Bug ID CSCuz59223.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiIsolator version 1.0.0, FortiIsolator version 1.1.0, FortiIsolator version 1.2.0 through 1.2.2, FortiIsolator version 2.0.0 through 2.0.1, FortiIsolator version 2.1.0 through 2.1.2, FortiIsolator version 2.2.0, FortiIsolator version 2.3.0 through 2.3.4 allows attacker to execute arbitrary OS commands in the underlying shell via specially crafted input parameters.

evernote-mcp-server openBrowser Command Injection Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of evernote-mcp-server. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the openBrowser function. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the service account. Was ZDI-CAN-27913.

VMware NSX Edge contains a CLI shell injection vulnerability. A malicious actor with SSH access to an NSX-Edge appliance can execute arbitrary commands on the operating system as root.

An improper neutralization of special elements used in an OS Command vulnerability [CWE-78] in FortiAP-C console 5.4.0 through 5.4.3, 5.2.0 through 5.2.1 may allow an authenticated attacker to execute unauthorized commands by running CLI commands with specifically crafted arguments.

All versions of the package smartctl are vulnerable to Command Injection via the info method due to improper input sanitization.

TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a command injection vulnerability via the command parameter at setting/setTracerouteCfg.

TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a command injection vulnerability via the ip parameter at the function setDiagnosisCfg.

An authenticated command injection vulnerability exists in the Aruba InstantOS and ArubaOS 10 command line interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands as a privileged user on the underlying operating system of Aruba InstantOS 6.4.x: 6.4.4.8-4.2.4.20 and below; Aruba InstantOS 6.5.x: 6.5.4.23 and below; Aruba InstantOS 8.6.x: 8.6.0.18 and below; Aruba InstantOS 8.7.x: 8.7.1.9 and below; Aruba InstantOS 8.10.x: 8.10.0.1 and below; ArubaOS 10.3.x: 10.3.1.0 and below; Aruba has released upgrades for Aruba InstantOS that address this security vulnerability.

Dell EMC PowerScale OneFS versions 8.1.0 - 9.1.0 contain an improper input validation vulnerability. A user with the ISI_PRIV_CLUSTER privilege may exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

H3C GR2200 MiniGR1A0V100R014 was discovered to contain a command injection vulnerability via the param parameter at DelL2tpLNSList.

TOTOLINK A3700R V9.1.2u.6134_B20201202 was discovered to contain a command injection vulnerability via the host_time parameter in the function NTPSyncWithHost.

TOTOLINK A3700R V9.1.2u.6134_B20201202 was discovered to contain a command injection vulnerability via the command parameter in the function setTracerouteCfg.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a command injection vulnerability via the FileName parameter in the function UploadFirmwareFile.

TOTOLINK A3700R V9.1.2u.6134_B20201202 was discovered to contain a command injection vulnerability via the hostName parameter in the function setOpModeCfg.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a command injection vulnerability via the command parameter in the function setTracerouteCfg.

H3C GR3200 MiniGR1B0V100R014 was discovered to contain a command injection vulnerability via the param parameter at DelL2tpLNSList.

A command injection vulnerability in the protest binary allows an attacker with access to the remote command line interface to execute arbitrary commands as root.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a command injection vulnerability via the ip parameter in the function setDiagnosisCfg.

TOTOLink A3600R V4.1.2cu.5182_B20201102 was discovered to contain a command injection vulnerability via the username parameter in /cstecgi.cgi.

cnMaestro is vulnerable to a local privilege escalation. By default, a user does not have root privileges. However, a user can run scripts as sudo, which could allow an attacker to gain root privileges when running user scripts outside allowed commands.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a command injection vulnerability via the hostName parameter in the function setOpModeCfg.

Multiple improper neutralization of special elements used in an OS Command ('OS Command Injection') vulnerabilities [CWE-78] in FortiTester 7.1.0, 7.0 all versions, 4.0.0 through 4.2.0, 2.3.0 through 3.9.1 may allow an authenticated attacker to execute arbitrary commands in the underlying shell.

"IBM InfoSphere Information Server 11.7 could allow a locally authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-"Force ID: 231361.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.66, EX2700 before 1.0.1.68, WN3000RPv2 before 1.0.0.90, WN3000RPv3 before 1.0.2.100, LBR1020 before 2.6.5.20, LBR20 before 2.6.5.32, R6700AX before 1.0.10.110, R7800 before 1.0.2.86, R8900 before 1.0.5.38, R9000 before 1.0.5.38, RAX10 before 1.0.10.110, RAX120v1 before 1.2.3.28, RAX120v2 before 1.2.3.28, RAX70 before 1.0.10.110, RAX78 before 1.0.10.110, XR450 before 2.3.2.130, XR500 before 2.3.2.130, and XR700 before 1.0.1.46.

A shell command injection vulnerability in the PAN-OS CLI allows a local authenticated user to escape the restricted shell and escalate privileges. This issue affects only PAN-OS 8.1 versions earlier than PAN-OS 8.1.13. This issue does not affect PAN-OS 7.1, PAN-OS 9.0, or later PAN-OS versions. This issue is fixed in PAN-OS 8.1.13, and all later versions.

An unauthenticated Named Pipe channel in Controlup Real-Time Agent (cuAgent.exe) before 8.5 potentially allows an attacker to run OS commands via the ProcessActionRequest WCF method.

A improper neutralization of special elements used in a command ('command injection') in Fortinet FortiExtender version 7.0.1 and below, 4.2.3 and below, 4.1.7 and below allows an authenticated attacker to execute privileged shell commands via CLI commands including special characters

A command injection vulnerability in Brocade Fabric OS before 9.2.0c, and 9.2.1 through 9.2.1a on IP extension platforms could allow a local authenticated attacker to perform a privileged escalation via crafted use of the portcfg command. This specific exploitation is only possible on IP Extension platforms: Brocade 7810, Brocade 7840, Brocade 7850 and on Brocade X6 or X7 directors with an SX-6 Extension blade installed. The attacker must be logged into the switch via SSH or serial console to conduct the attack.

TensorFlow is an open source platform for machine learning. In affected versions TensorFlow's `saved_model_cli` tool is vulnerable to a code injection as it calls `eval` on user supplied strings. This can be used by attackers to run arbitrary code on the plaform where the CLI tool runs. However, given that the tool is always run manually, the impact of this is not severe. We have patched this by adding a `safe` flag which defaults to `True` and an explicit warning for users. The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, TensorFlow 2.5.2, and TensorFlow 2.4.4, as these are also affected and still in supported range.

D-Link router DSL-2750U with firmware vME1.16 or prior versions is vulnerable to OS command injection. An unauthenticated attacker on the local network may exploit this, with CVE-2021-3707, to execute any OS commands on the vulnerable device.

Command injection vulnerability in Druva inSync 6.9.0 for MacOS, allows attackers to execute arbitrary commands via crafted payload to the local HTTP server due to un-sanitized call to the python os.system library.

EnzoH has an OS command injection vulnerability. Successful exploitation of this vulnerability may lead to arbitrary command execution.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A command injection vulnerability in the CGI program of the Zyxel VPN2S firmware version 1.12 could allow an authenticated, local user to execute arbitrary OS commands.

Tesla Model S Iris Modem ql_atfwd Command Injection Code Execution Vulnerability. This vulnerability allows local attackers to execute arbitrary code on affected Tesla Model S vehicles. An attacker must first obtain the ability to execute code on the target system in order to exploit this vulnerability. The specific flaw exists within the ql_atfwd process. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code on the target modem in the context of root. Was ZDI-CAN-23201.

A command injection vulnerability has been reported to affect Media Streaming add-on. If an attacker gains local network access who have also gained a user account, they can then exploit the vulnerability to execute arbitrary commands. We have already fixed the vulnerability in the following version: Media Streaming add-on 500.1.1.6 ( 2024/08/02 ) and later

A command injection vulnerability in sftp command processing on Juniper Networks Junos OS Evolved allows an attacker with authenticated CLI access to be able to bypass configured access protections to execute arbitrary shell commands within the context of the current user. The vulnerability allows an attacker to bypass command authorization restrictions assigned to their specific user account and execute commands that are available to the privilege level for which the user is assigned. For example, a user that is in the super-user login class, but restricted to executing specific CLI commands could exploit the vulnerability to execute any other command available to an unrestricted admin user. This vulnerability does not increase the privilege level of the user, but rather bypasses any CLI command restrictions by allowing full access to the shell. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R2-S2-EVO; 21.1 versions prior to 21.1R2-EVO; 21.2 versions prior to 21.2R1-S1-EVO, 21.2R2-EVO.