A vulnerability in the web interface of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition. Note: This vulnerability applies to IP Version 4 (IPv4) and IP Version 6 (IPv6) HTTP traffic.

A vulnerability in the packet processing of Cisco IOS XE Software for Cisco 4461 Integrated Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect processing of IPv4 or IPv6 traffic to or through an affected device. An attacker could exploit this vulnerability by sending IP traffic to or through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust memory resources on the affected device, leading to a denial of service (DoS) condition. The vulnerability is due to improper resource management for inbound SSL/TLS connections. An attacker could exploit this vulnerability by establishing multiple SSL/TLS connections with specific conditions to the affected device. A successful exploit could allow the attacker to exhaust the memory on the affected device, causing the device to stop accepting new SSL/TLS connections and resulting in a DoS condition for services on the device that process SSL/TLS traffic. Manual intervention is required to recover an affected device.

A vulnerability in the Common Open Policy Service (COPS) engine of Cisco IOS XE Software on Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to crash a device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a malformed COPS message to the device. A successful exploit could allow the attacker to crash the device.

A vulnerability in the RESTCONF and NETCONF-YANG access control list (ACL) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect processing of the ACL that is tied to the RESTCONF or NETCONF-YANG feature. An attacker could exploit this vulnerability by accessing the device using RESTCONF or NETCONF-YANG. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the Polaris kernel of Cisco Catalyst 9200 Series Switches could allow an unauthenticated, remote attacker to crash the device. The vulnerability is due to insufficient packet size validation. An attacker could exploit this vulnerability by sending jumbo frames or frames larger than the configured MTU size to the management interface of this device. A successful exploit could allow the attacker to crash the device fully before an automatic recovery.

A vulnerability in Cisco Aironet Access Point (AP) Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper handling of clients that are trying to connect to the AP. An attacker could exploit this vulnerability by sending authentication requests from multiple clients to an affected device. A successful exploit could allow the attacker to cause the affected device to reload.

A vulnerability in the Snort 2 and Snort 3 TCP and UDP detection engine of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Appliances could allow an unauthenticated, remote attacker to cause memory corruption, which could cause the Snort detection engine to restart unexpectedly. This vulnerability is due to improper memory management when the Snort detection engine processes specific TCP or UDP packets. An attacker could exploit this vulnerability by sending crafted TCP or UDP packets through a device that is inspecting traffic using the Snort detection engine. A successful exploit could allow the attacker to restart the Snort detection engine repeatedly, which could cause a denial of service (DoS) condition. The DoS condition impacts only the traffic through the device that is examined by the Snort detection engine. The device can still be managed over the network. Note: Once a memory block is corrupted, it cannot be cleared until the Cisco Firepower 2100 Series Appliance is manually reloaded. This means that the Snort detection engine could crash repeatedly, causing traffic that is processed by the Snort detection engine to be dropped until the device is manually reloaded.

A vulnerability in the process that classifies traffic that is going to the Unified Threat Defense (UTD) component of Cisco IOS XE Software in controller mode could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because UTD improperly handles certain packets as those packets egress an SD-WAN IPsec tunnel. An attacker could exploit this vulnerability by sending crafted traffic through an SD-WAN IPsec tunnel that is configured on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: SD-WAN tunnels that are configured with Generic Routing Encapsulation (GRE) are not affected by this vulnerability.

A vulnerability in the DHCP Snooping feature of Cisco IOS XE Software on Software-Defined Access (SD-Access) fabric edge nodes could allow an unauthenticated, remote attacker to cause high CPU utilization on an affected device, resulting in a denial of service (DoS) condition that requires a manual reload to recover. This vulnerability is due to improper handling of IPv4 DHCP packets. An attacker could exploit this vulnerability by sending certain IPv4 DHCP packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition that requires a manual reload to recover.

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to upload arbitrary-sized files to specific folders on an affected device, which could lead to an unexpected device reload. The vulnerability exists because the affected software does not efficiently handle the writing of large files to specific folders on the local file system. An attacker could exploit this vulnerability by uploading files to those specific folders. A successful exploit could allow the attacker to write a file that triggers a watchdog timeout, which would cause the device to unexpectedly reload, causing a denial of service (DoS) condition.

Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

A vulnerability in the IPv4 Software-Defined Access (SD-Access) fabric edge node feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization and stop all traffic processing, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain IPv4 packets. An attacker could exploit this vulnerability by sending certain IPv4 packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition.

Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

A vulnerability in the TLS processing feature of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an issue that occurs when TLS traffic is processed. An attacker could exploit this vulnerability by sending certain TLS traffic over IPv4 through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition and impacting traffic to and through the affected device.

A vulnerability in the multicast DNS (mDNS) feature of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper validation of mDNS packets. An attacker could exploit this vulnerability by sending a crafted mDNS packet to an affected device. A successful exploit could cause a device to reload, resulting in a DoS condition.

A vulnerability in the External Border Gateway Protocol (eBGP) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because eBGP traffic is mapped to a shared hardware rate-limiter queue. An attacker could exploit this vulnerability by sending large amounts of network traffic with certain characteristics through an affected device. A successful exploit could allow the attacker to cause eBGP neighbor sessions to be dropped, leading to a DoS condition in the network.

A vulnerability in the Secure Sockets Layer (SSL) VPN feature for Cisco Small Business RV VPN Routers could allow an unauthenticated, remote attacker to cause the device to unexpectedly restart, causing a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request over an SSL connection to the targeted device. A successful exploit could allow the attacker to cause a reload, resulting in a DoS condition.

A vulnerability with the handling of MPLS traffic for Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the netstack process to unexpectedly restart, which could cause the device to stop processing network traffic or to reload. This vulnerability is due to lack of proper error checking when processing an ingress MPLS frame. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that is encapsulated within an MPLS frame to an MPLS-enabled interface of the targeted device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition. Note: The IPv6 packet can be generated multiple hops away from the targeted device and then encapsulated within MPLS. The DoS condition may occur when the NX-OS device processes the packet.

A vulnerability in the IKEv1 fragmentation code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a heap underflow, resulting in an affected device reloading. This vulnerability exists because crafted, fragmented IKEv1 packets are not properly reassembled. An attacker could exploit this vulnerability by sending crafted UDP packets to an affected system. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: Only traffic that is directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered by IPv4 and IPv6 traffic..

A vulnerability in the certificate processing of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper parsing of SSL/TLS certificates. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static Network Address Translation (NAT) rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in confederation implementation for the Border Gateway Protocol (BGP) in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to a memory corruption that occurs when a BGP update is created with an AS_CONFED_SEQUENCE attribute that has 255 autonomous system numbers (AS numbers). An attacker could exploit this vulnerability by sending a crafted BGP update message, or the network could be designed in such a manner that the AS_CONFED_SEQUENCE attribute grows to 255 AS numbers or more. A successful exploit could allow the attacker to cause memory corruption, which may cause the BGP process to restart, resulting in a DoS condition. To exploit this vulnerability, an attacker must control a BGP confederation speaker within the same autonomous system as the victim, or the network must be designed in such a manner that the AS_CONFED_SEQUENCE attribute grows to 255 AS numbers or more.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a memory leak or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device to be processed. A successful exploit could cause an affected device to continuously consume memory and eventually reload, resulting in a DoS condition. Cisco Bug IDs: CSCvf22394.

A vulnerability in the Bidirectional Forwarding Detection (BFD) offload implementation of Cisco Catalyst 4500 Series Switches and Cisco Catalyst 4500-X Series Switches could allow an unauthenticated, remote attacker to cause a crash of the iosd process, causing a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when the BFD header in a BFD packet is incomplete. An attacker could exploit this vulnerability by sending a crafted BFD message to or across an affected switch. A successful exploit could allow the attacker to trigger a reload of the system. This vulnerability affects Catalyst 4500 Supervisor Engine 6-E (K5), Catalyst 4500 Supervisor Engine 6L-E (K10), Catalyst 4500 Supervisor Engine 7-E (K10), Catalyst 4500 Supervisor Engine 7L-E (K10), Catalyst 4500E Supervisor Engine 8-E (K10), Catalyst 4500E Supervisor Engine 8L-E (K10), Catalyst 4500E Supervisor Engine 9-E (K10), Catalyst 4500-X Series Switches (K10), Catalyst 4900M Switch (K5), Catalyst 4948E Ethernet Switch (K5). Cisco Bug IDs: CSCvc40729.

A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause a heap overflow condition on the affected device, which will cause the device to reload and result in a DoS condition. Cisco Bug IDs: CSCvg62730.

A vulnerability in the processing of Control and Provisioning of Wireless Access Points (CAPWAP) Mobility messages in Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a logic error and improper management of resources related to the handling of CAPWAP Mobility messages. An attacker could exploit this vulnerability by sending crafted CAPWAP Mobility packets to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected device. This would cause the device to reload, resulting in a DoS condition.

A vulnerability in the AppNav-XE feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of certain TCP segments. An attacker could exploit this vulnerability by sending a stream of crafted TCP traffic at a high rate through an interface of an affected device. That interface would need to have AppNav interception enabled. A successful exploit could allow the attacker to cause the device to reload.

A vulnerability in the DNS application layer gateway (ALG) functionality that is used by Network Address Translation (NAT) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a logic error that occurs when an affected device inspects certain TCP DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through the affected device that is performing NAT for DNS packets. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on the affected device. Note: This vulnerability can be exploited only by sending IPv4 TCP packets through an affected device. This vulnerability cannot be exploited by sending IPv6 traffic.

A vulnerability in the Zone-Based Firewall code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a device to reload. The vulnerability is due to the way fragmented packets are handled in the firewall code. An attacker could exploit this vulnerability by sending fragmented IP Version 4 or IP Version 6 packets through an affected device. An exploit could allow the attacker to cause the device to crash, resulting in a denial of service (DoS) condition. The following releases of Cisco IOS XE Software are vulnerable: Everest-16.4.1, Everest-16.4.2, Everest-16.5.1, Everest-16.5.1b, Everest-16.6.1, Everest-16.6.1a. Cisco Bug IDs: CSCvf60296.

A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z3 Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit this vulnerability by crafting a malicious request and sending it to the affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to crash and restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and re-authenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention. Cisco Meraki has released software updates that address this vulnerability.

A vulnerability in the OLE2 file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device.The vulnerability is due to incorrect use of the realloc function that may result in a double-free. An attacker could exploit this vulnerability by submitting a crafted OLE2 file to be scanned by ClamAV on the affected device. An exploit could allow the attacker to cause the ClamAV scanning process to crash, resulting in a denial of service condition.

A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the processing of malformed Common Industrial Protocol (CIP) packets that are sent to Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient input validation during processing of CIP packets. An attacker could exploit this vulnerability by sending a malformed CIP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a DoS condition.

A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incomplete input validation of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending a malicious OSPFv3 link-state advertisement (LSA) to an affected device. A successful exploit could allow the attacker to cause the OSPFv3 process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The OSPFv3 feature is disabled by default. To exploit this vulnerability, an attacker must be able to establish a full OSPFv3 neighbor state with an affected device. For more information about exploitation conditions, see the Details section of this advisory.

A vulnerability in the connection handling function in Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper traffic handling when platform limits are reached. An attacker could exploit this vulnerability by sending a high rate of UDP traffic through an affected device. A successful exploit could allow the attacker to cause all new, incoming connections to be dropped, resulting in a DoS condition.

Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456.

A vulnerability in the Interactive Voice Response (IVR) management connection interface for Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to cause the IVR connection to disconnect, creating a system-wide denial of service (DoS) condition. The vulnerability is due to improper handling of a TCP connection request when the IVR connection is already established. An attacker could exploit this vulnerability by initiating a crafted connection to the IP address of the targeted CVP device. An exploit could allow the attacker to disconnect the IVR to CVP connection, creating a DoS condition that prevents the CVP from accepting new, incoming calls while the IVR automatically attempts to re-establish the connection to the CVP. This vulnerability affects Cisco Unified Customer Voice Portal (CVP) Software Release 11.5(1). Cisco Bug IDs: CSCve70560.