A vulnerability in the web-based management interface of Cisco Prime Service Catalog could allow an authenticated, remote attacker to access sensitive information on an affected device. This vulnerability is due to improper enforcement of Administrator privilege levels for low-value sensitive data. An attacker with read-only Administrator access to the web-based management interface could exploit this vulnerability by sending a malicious HTTP request to the page that contains the sensitive data. A successful exploit could allow the attacker to collect sensitive information about users of the system and orders that have been placed using the application.

Multiple vulnerabilities in the API of Cisco DNA Center Software could allow an authenticated, remote attacker to read information from a restricted container, enumerate user information, or execute arbitrary commands in a restricted container as the root user. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Application Policy Infrastructure Controller (APIC) devices with software before 1.0(3h) and 1.1 before 1.1(1j) and Nexus 9000 ACI Mode switches with software before 11.0(3h) and 11.1 before 11.1(1j) allow remote authenticated users to bypass intended RBAC restrictions via crafted REST requests, aka Bug ID CSCut12998.

A vulnerability in the Graphite web interface of the Policy and Charging Rules Function (PCRF) of Cisco Policy Suite (CPS) could allow an unauthenticated, remote attacker to access the Graphite web interface. The attacker would need to have access to the internal VLAN where CPS is deployed. The vulnerability is due to lack of authentication. An attacker could exploit this vulnerability by directly connecting to the Graphite web interface. An exploit could allow the attacker to access various statistics and Key Performance Indicators (KPIs) regarding the Cisco Policy Suite environment.

A vulnerability in the authentication and authorization checking mechanisms of Cisco Wireless LAN Controller (WLC) Software could allow an authenticated, adjacent attacker to gain network access to a Cisco TrustSec domain. Under normal circumstances, this access should be prohibited. The vulnerability is due to the dynamic assignment of Security Group Tags (SGTs) during a wireless roam from one Service Set Identifier (SSID) to another within the Cisco TrustSec domain. An attacker could exploit this vulnerability by attempting to acquire an SGT from other SSIDs within the domain. Successful exploitation could allow the attacker to gain privileged network access that should be prohibited under normal circumstances.

A vulnerability in the Stealthwatch Management Console (SMC) of Cisco Stealthwatch Enterprise could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected system. The vulnerability is due to an insecure system configuration. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. An exploit could allow the attacker to gain unauthenticated access, resulting in elevated privileges in the SMC.

A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to cause a DoS condition on a remotely managed router. This vulnerability is due to improper error handling. An attacker could exploit this vulnerability by submitting crafted input to the web-based management interface. A successful exploit could allow the attacker to request unauthorized files from a remote router, causing the router to reload and resulting in a DoS condition.

The API web interface in Cisco Prime Infrastructure before 3.1 and Cisco Evolved Programmable Network Manager before 1.2.4 allows remote authenticated users to bypass intended RBAC restrictions and obtain sensitive information, and consequently gain privileges, via crafted JSON data, aka Bug ID CSCuy12409.

A vulnerability in the administrative web interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to gain additional privileges on an affected device. The vulnerability is due to improper controls on certain pages in the web interface. An attacker could exploit this vulnerability by authenticating to the device with an administrator account and sending a crafted HTTP request. A successful exploit could allow the attacker to create additional Admin accounts with different user roles. An attacker could then use these accounts to perform actions within their scope. The attacker would need valid Admin credentials for the device. This vulnerability cannot be exploited to add a Super Admin account.

A vulnerability in the MACsec Key Agreement (MKA) using Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to bypass authentication and pass traffic through a Layer 3 interface of an affected device. The vulnerability is due to a logic error in the affected software. An attacker could exploit this vulnerability by connecting to and passing traffic through a Layer 3 interface of an affected device, if the interface is configured for MACsec MKA using EAP-TLS and is running in access-session closed mode. A successful exploit could allow the attacker to bypass 802.1x network access controls and gain access to the network.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to bypass authorization, access critical services, and cause a denial of service (DoS) condition. The vulnerability exists because the software fails to sanitize URLs before it handles requests. An attacker could exploit this vulnerability by submitting a crafted URL. A successful exploit could allow the attacker to gain unauthorized access to critical services and cause a DoS condition. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 11.0(5) for Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 for the IP Conference Phone 8832 and the rest of the IP Phone 8800 Series. Cisco IP Conference Phone 8831 is not affected.

Cisco Prime Infrastructure 2.2(2) does not properly restrict use of IFRAME elements, which makes it easier for remote attackers to conduct clickjacking attacks and unspecified other attacks via a crafted web site, related to a "cross-frame scripting (XFS)" issue, aka Bug ID CSCuw65846, a different vulnerability than CVE-2015-6434.

A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to gain read and write access to a critical configuration file. The vulnerability is due to a failure to impose strict filesystem permissions on the targeted device. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow an attacker to use the content of this configuration file to bypass authentication and log in as any user of the device. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

A vulnerability in the web application of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to specify non-log files as sources for syslog reporting. This vulnerability is due to improper restriction of the syslog configuration. An attacker could exploit this vulnerability by configuring non-log files as sources for syslog reporting through the web application. A successful exploit could allow the attacker to read non-log files on the CSPC.

A vulnerability in the Snort 2 and Snort 3 deep packet inspection of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured Snort rules and allow traffic onto the network that should have been dropped. This vulnerability is due to a logic error in the integration of the Snort Engine rules with Cisco Secure FTD Software that could allow different Snort rules to be hit when deep inspection of the packet is performed for the inner and outer connections. An attacker could exploit this vulnerability by sending crafted traffic to a targeted device that would hit configured Snort rules. A successful exploit could allow the attacker to send traffic to a network where it should have been denied.

Multiple vulnerabilities in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. These vulnerabilities are due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit these vulnerabilities by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should be activated for the ENIP packet.

A vulnerability in the access control list (ACL) programming of Cisco ASR 900 and ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect programming of hardware when an ACL is configured using a method other than the configuration CLI. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device.

A vulnerability in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should be denied through an affected device. This vulnerability is due to improper error handling when an affected device that is joining a cluster runs out of memory while replicating access control rules. An attacker could exploit this vulnerability by sending traffic that should be blocked through the device. A successful exploit could allow the attacker to bypass access controls and reach devices in protected networks.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco IOS XE SD-WAN Software CLI could allow an authenticated, local attacker to elevate privileges and execute arbitrary code on the underlying operating system as the root user. An attacker must be authenticated on an affected device as a PRIV15 user. This vulnerability is due to insufficient file system protection and the presence of a sensitive file in the bootflash directory on an affected device. An attacker could exploit this vulnerability by overwriting an installer file stored in the bootflash directory with arbitrary commands that can be executed with root-level privileges. A successful exploit could allow the attacker to read and write changes to the configuration database on the affected device.

A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query.

A vulnerability in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. This vulnerability is due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit this vulnerability by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should trigger and drop for the ENIP packet.

A vulnerability with the access control list (ACL) management within a stacked switch configuration of Cisco Business 250 Series Smart Switches and Business 350 Series Managed Switches could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. This vulnerability is due to incorrect processing of ACLs on a stacked configuration when either the primary or backup switches experience a full stack reload or power cycle. An attacker could exploit this vulnerability by sending crafted traffic through an affected device. A successful exploit could allow the attacker to bypass configured ACLs, causing traffic to be dropped or forwarded in an unexpected manner. The attacker does not have control over the conditions that result in the device being in the vulnerable state. Note: In the vulnerable state, the ACL would be correctly applied on the primary devices but could be incorrectly applied to the backup devices.

A vulnerability in the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary code with vmanage user privileges or cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient access restrictions to the HTTP management interface of the affected solution. An attacker could exploit this vulnerability by sending a malicious HTTP request to the affected management service through an authenticated device. A successful exploit could allow the attacker to execute arbitrary code with vmanage user privileges or stop HTTP services on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69976.

A vulnerability in Cisco Webex Teams, formerly Cisco Spark, could allow an authenticated, remote attacker to view and modify data for an organization other than their own organization. The vulnerability exists because the affected software performs insufficient checks for associations between user accounts and organization accounts. An attacker who has administrator or compliance officer privileges for one organization account could exploit this vulnerability by using those privileges to view and modify data for another organization account. No customer data was impacted by this vulnerability.

A vulnerability in the access control logic of the Secure Shell (SSH) server of Cisco IOS and IOS XE Software may allow connections sourced from a virtual routing and forwarding (VRF) instance despite the absence of the vrf-also keyword in the access-class configuration. The vulnerability is due to a missing check in the SSH server. An attacker could use this vulnerability to open an SSH connection to an affected Cisco IOS or IOS XE device with a source address belonging to a VRF instance. Once connected, the attacker would still need to provide valid credentials to access the device.

A vulnerability in the anti-spam protection mechanisms of Cisco AsyncOS Software for the Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass certain content filters on an affected device. The vulnerability is due to incomplete input and validation checking mechanisms for certain Sender Policy Framework (SPF) messages that are sent to an affected device. An attacker could exploit this vulnerability by sending a customized SPF packet to an affected device. If successful, an exploit could allow the attacker to bypass the URL filters that are configured for the affected device, which could allow malicious URLs to pass through the device.

A vulnerability in certain authentication controls in the account services of Cisco Spark could allow an authenticated, remote attacker to interact with and view information on an affected device that would normally be prohibited. The vulnerability is due to the improper display of user-account tokens generated in the system. An attacker could exploit this vulnerability by logging in to the device with a token in use by another account. Successful exploitation could allow the attacker to cause a partial impact to the device's confidentiality, integrity, and availability. Cisco Bug IDs: CSCvg05206.

A vulnerability in the Traversal Using Relays around NAT (TURN) server component of Cisco Expressway software could allow an unauthenticated, remote attacker to bypass security controls and send network traffic to restricted destinations. The vulnerability is due to improper validation of specific connection information by the TURN server within the affected software. An attacker could exploit this issue by sending specially crafted network traffic to the affected software. A successful exploit could allow the attacker to send traffic through the affected software to destinations beyond the application, possibly allowing the attacker to gain unauthorized network access.

A vulnerability in the scheduled meeting template feature of Cisco Webex Meetings could allow an authenticated, remote attacker to delete a scheduled meeting template that belongs to another user in their organization. The vulnerability is due to insufficient authorization enforcement for requests to delete scheduled meeting templates. An attacker could exploit this vulnerability by sending a crafted request to the Webex Meetings interface to delete a scheduled meeting template. A successful exploit could allow the attacker to delete a scheduled meeting template that belongs to a user other than themselves.

Cisco Virtual TelePresence Server Software does not properly restrict use of the serial port, which allows local users to execute arbitrary OS commands as root by leveraging vSphere controller administrative privileges, aka Bug ID CSCus61123.

The Management Interface on Cisco Content Services Switch (CSS) 11500 devices 8.20.4.02 and earlier allows remote attackers to bypass intended restrictions on local-network device access via crafted SSH packets, aka Bug ID CSCut14855.

The failover ipsec implementation in Cisco Adaptive Security Appliance (ASA) Software 9.1 before 9.1(6), 9.2 before 9.2(3.3), and 9.3 before 9.3(3) does not properly validate failover communication messages, which allows remote attackers to reconfigure an ASA device, and consequently obtain administrative control, by sending crafted UDP packets over the local network to the failover interface, aka Bug ID CSCur21069.

The Posture module for Cisco Identity Services Engine (ISE), as distributed in Cisco AnyConnect Secure Mobility Client 4.0(64), allows local users to gain privileges via unspecified commands, aka Bug ID CSCut05797.

Cisco TelePresence TC before 7.3.4 on Integrator C devices allows remote attackers to bypass authentication via vectors involving multiple request parameters, aka Bug ID CSCuv00604.

The web interface in Cisco FireSIGHT Management Center 5.3.1.4 allows remote attackers to delete arbitrary system policies via modified parameters in a POST request, aka Bug ID CSCuu25390.

Cisco Unified Web and E-Mail Interaction Manager 9.0(2) and 11.0(1) improperly performs authorization, which allows remote authenticated users to read or write to stored data via unspecified vectors, aka Bug ID CSCuo89056.

Cisco Unified Web and E-Mail Interaction Manager 9.0(2) improperly performs authorization, which allows remote authenticated users to remove default messaging-queue system folders via unspecified vectors, aka Bug ID CSCuo89046.

A vulnerability within the firewall configuration of the Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) could allow an unauthenticated, adjacent attacker to gain privileged access to services only available on the internal network of the device. The vulnerability is due to an incorrect firewall rule on the device. The misconfiguration could allow traffic sent to the public interface of the device to be forwarded to the internal virtual network of the APIC-EM. An attacker that is logically adjacent to the network on which the public interface of the affected APIC-EM resides could leverage this behavior to gain access to services listening on the internal network with elevated privileges. This vulnerability affects appliances or virtual devices running Cisco Application Policy Infrastructure Controller Enterprise Module prior to version 1.5. Cisco Bug IDs: CSCve89638.

A vulnerability in Cisco NX-OS System Software running on Cisco MDS Multilayer Director Switches, Cisco Nexus 7000 Series Switches, and Cisco Nexus 7700 Series Switches could allow an authenticated, local attacker to access the Bash shell of an affected device's operating system, even if the Bash shell is disabled on the system. The vulnerability is due to insufficient sanitization of user-supplied parameters that are passed to certain functions of the Python scripting sandbox of the affected system. An attacker could exploit this vulnerability to escape the scripting sandbox and enter the Bash shell of the operating system with the privileges of the authenticated user for the affected system. To exploit this vulnerability, the attacker must have local access to the affected system and be authenticated to the affected system with administrative or Python execution privileges. Cisco Bug IDs: CSCvd86513.

Cisco IOS 15.2(04)M6 and 15.4(03)S lets physical-interface ACLs supersede tunnel-interface ACLs, which allows remote attackers to bypass intended network-traffic restrictions in opportunistic circumstances by using a tunnel, aka Bug ID CSCur01042.

Multiple vulnerabilities in Cisco Intersight Virtual Appliance could allow an unauthenticated, adjacent attacker to access sensitive internal services from an external interface. These vulnerabilities are due to insufficient restrictions for IPv4 or IPv6 packets that are received on the external management interface. An attacker could exploit these vulnerabilities by sending specific traffic to this interface on an affected device. A successful exploit could allow the attacker to access sensitive internal services and make configuration changes on the affected device.

A vulnerability in the Zone-Based Policy Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent the Zone-Based Policy Firewall from correctly classifying traffic. This vulnerability exists because ICMP and UDP responder-to-initiator flows are not inspected when the Zone-Based Policy Firewall has either Unified Threat Defense (UTD) or Application Quality of Experience (AppQoE) configured. An attacker could exploit this vulnerability by attempting to send UDP or ICMP flows through the network. A successful exploit could allow the attacker to inject traffic through the Zone-Based Policy Firewall, resulting in traffic being dropped because it is incorrectly classified or in incorrect reporting figures being produced by high-speed logging (HSL).

A vulnerability in the fabric infrastructure file system access control of Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to read arbitrary files on an affected system. This vulnerability is due to improper access control. An attacker with Administrator privileges could exploit this vulnerability by executing a specific vulnerable command on an affected device. A successful exploit could allow the attacker to read arbitrary files on the file system of the affected device.

A vulnerability in the boot logic of Cisco Access Points Software could allow an authenticated, local attacker to execute unsigned code at boot time. The vulnerability is due to an improper check that is performed by the area of code that manages system startup processes. An attacker could exploit this vulnerability by modifying a specific file that is stored on the system, which would allow the attacker to bypass existing protections. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. Note: To exploit this vulnerability, the attacker would need to have access to the development shell (devshell) on the device.

A vulnerability in an API endpoint of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Application Policy Infrastructure Controller (Cloud APIC) could allow an unauthenticated, remote attacker to read or write arbitrary files on an affected system. This vulnerability is due to improper access control. An attacker could exploit this vulnerability by using a specific API endpoint to upload a file to an affected device. A successful exploit could allow the attacker to read or write arbitrary files on an affected device.

Multiple vulnerabilities in Cisco Intersight Virtual Appliance could allow an unauthenticated, adjacent attacker to access sensitive internal services from an external interface. These vulnerabilities are due to insufficient restrictions for IPv4 or IPv6 packets that are received on the external management interface. An attacker could exploit these vulnerabilities by sending specific traffic to this interface on an affected device. A successful exploit could allow the attacker to access sensitive internal services and make configuration changes on the affected device.

A vulnerability in an access control mechanism of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to access services beyond the scope of their authorization. This vulnerability is due to insufficient enforcement of access control in the affected software. An attacker could exploit this vulnerability by directly accessing the internal services of an affected device. A successful exploit could allow the attacker to overwrite policies and impact the configuration and operation of the affected device.