A vulnerability in the SOAP API endpoint of Cisco Unified Communications Manager, Cisco Unified Communications Manager Session Management Edition, Cisco Unified Communications Manager IM & Presence Service, Cisco Unity Connection, and Cisco Prime License Manager could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper sanitization of user-supplied input. An attacker could exploit this vulnerability by sending a SOAP API request with crafted parameters to an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying Linux operating system of the affected device.

Multiple vulnerabilities in the web-based management interface of the Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an attacker to do the following: Execute arbitrary code Cause a denial of service (DoS) condition Execute arbitrary commands For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Business Process Automation (BPA) could allow an authenticated, remote attacker to elevate privileges to Administrator. These vulnerabilities are due to improper authorization enforcement for specific features and for access to log files that contain confidential information. An attacker could exploit these vulnerabilities either by submitting crafted HTTP messages to an affected system and performing unauthorized actions with the privileges of an administrator, or by retrieving sensitive data from the logs and using it to impersonate a legitimate privileged user. A successful exploit could allow the attacker to elevate privileges to Administrator.

A vulnerability in the spam quarantine feature of Cisco Secure Email and Web Manager, formerly Cisco Security Management Appliance (SMA), could allow an authenticated, remote attacker to gain unauthorized access and modify the spam quarantine settings of another user. This vulnerability exists because access to the spam quarantine feature is not properly restricted. An attacker could exploit this vulnerability by sending malicious requests to an affected system. A successful exploit could allow the attacker to modify another user's spam quarantine settings, possibly disabling security controls or viewing email messages stored on the spam quarantine interfaces.

A vulnerability in the configuration management of Cisco AsyncOS for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. This vulnerability is due to insufficient validation of user-supplied XML input for the web interface. An attacker could exploit this vulnerability by uploading crafted XML configuration files that contain scripting code to a vulnerable device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system and elevate privileges to root. An attacker would need a valid user account with the rights to upload configuration files to exploit this vulnerability.

A vulnerability in the web UI of Cisco Modeling Labs could allow an authenticated, remote attacker to execute arbitrary commands with the privileges of the web application on the underlying operating system of an affected Cisco Modeling Labs server. This vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected server. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the web application, virl2, on the underlying operating system of the affected server. To exploit this vulnerability, the attacker must have valid user credentials on the web UI.

Multiple vulnerabilities in the REST API endpoint of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to view, modify, and delete data without proper authorization. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in certain REST API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to execute arbitrary SQL commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the user management roles of Cisco DNA Center could allow an authenticated, remote attacker to execute unauthorized commands on an affected device. The vulnerability is due to improper enforcement of actions for assigned user roles. An attacker could exploit this vulnerability by authenticating as a user with an Observer role and executing commands on the affected device. A successful exploit could allow a user with the Observer role to execute commands to view diagnostic information of the devices that Cisco DNA Center manages.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Command Runner tool of Cisco DNA Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation by the Command Runner tool. An attacker could exploit this vulnerability by providing crafted input during command execution or via a crafted command runner API call. A successful exploit could allow the attacker to execute arbitrary CLI commands on devices managed by Cisco DNA Center.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in certain REST API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to execute arbitrary SQL commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in a REST API endpoint and web-based management interface of Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an authenticated, remote attacker with read-only privileges to execute arbitrary SQL commands on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to a specific REST API endpoint or web-based management interface. A successful exploit could allow the attacker to read, modify, or delete arbitrary data on an internal database, which could affect the availability of the device. 

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the web-based management interface of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to elevate privileges on an affected device. This vulnerability exists because the web-based management interface discloses sensitive information. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow an attacker to elevate privileges from guest to admin.

A vulnerability in the JSON-RPC API feature in Cisco Crosswork Network Services Orchestrator (NSO) and ConfD that is used by the web-based management interfaces of Cisco Optical Site Manager and Cisco RV340 Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to modify the configuration of an affected application or device.  This vulnerability is due to improper authorization checks on the API. An attacker with privileges sufficient to access the affected application or device could exploit this vulnerability by sending malicious requests to the JSON-RPC API. A successful exploit could allow the attacker to make unauthorized modifications to the configuration of the affected application or device, including creating new user accounts or elevating their own privileges on an affected system.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected system. This vulnerability exists because the web-based management interface does not adequately validate user input. An attacker could exploit this vulnerability by authenticating to the application and sending crafted SQL queries to an affected system. A successful exploit could allow the attacker to obtain any data from the database, execute arbitrary commands on the underlying operating system, and elevate privileges to root. To exploit this vulnerability, an attacker would need at least Read Only user credentials.

A vulnerability in the REST API endpoints of Cisco NDFC could allow an authenticated, low-privileged, remote attacker to read or write files on an affected device. This vulnerability exists because of missing authorization controls on some REST API endpoints. An attacker could exploit this vulnerability by sending crafted API requests to an affected endpoint. A successful exploit could allow the attacker to perform limited network-admin functions such as reading device configuration information, uploading files, and modifying uploaded files. Note: This vulnerability only affects a subset of REST API endpoints and does not affect the web-based management interface.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability in the session management system of the Cisco Catalyst SD-WAN Manager multi-tenant feature could allow an authenticated, remote attacker to access another tenant that is being managed by the same Cisco Catalyst SD-WAN Manager instance. This vulnerability requires the multi-tenant feature to be enabled. This vulnerability is due to insufficient user session management within the Cisco Catalyst SD-WAN Manager system. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain unauthorized access to information about another tenant, make configuration changes, or possibly take a tenant offline causing a denial of service condition.

The Threat Management Console in Cisco Firepower Management Center 5.2.0 through 6.0.1 allows remote authenticated users to execute arbitrary commands via crafted web-application parameters, aka Bug ID CSCva30872.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with administrative privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input to the web UI. A successful exploit could allow an attacker to execute arbitrary commands with administrative privileges on an affected device.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Series Routers could allow an authenticated, remote attacker to inject arbitrary shell commands that are executed by an affected device. The vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary shell commands or scripts with root privileges on the affected device.

Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to elevate privileges to the level of an Administrator user on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to elevate privileges to the level of an Administrator user on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to execute code with root privileges on an affected system. The vulnerability is due to insufficient input sanitization during user authentication processing. An attacker could exploit this vulnerability by sending a crafted response to the Cisco SD-WAN vManage Software. A successful exploit could allow the attacker to access the software and execute commands they should not be authorized to execute.

A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to elevate privileges and execute commands with higher privileges. The vulnerability is due to insufficient authorization of the System Operator role capabilities. An attacker could exploit this vulnerability by logging in with the System Operator role, performing a series of actions, and then assuming a new higher privileged role. A successful exploit could allow the attacker to perform all actions associated with the privilege of the assumed role. If that role is an administrative role, the attacker would gain full access to the device.

Multiple vulnerabilities in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary code on an affected device. The vulnerabilities are due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit these vulnerabilities by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user.

A vulnerability in the web UI of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary code and execute arbitrary commands at the underlying operating system level. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands at the underlying operating system level.

A vulnerability in the archive utility of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. The vulnerability is due to a lack of proper input validation of paths that are embedded within archive files. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to write arbitrary files in the system with the privileges of the logged-in user.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected system. The vulnerability is due to improper validation of user-submitted parameters. An attacker could exploit this vulnerability by authenticating to the application and sending malicious requests to an affected system. A successful exploit could allow the attacker to obtain and modify sensitive information that is stored in the underlying database.

A vulnerability in Cisco Jabber for Windows could allow an authenticated, remote attacker to execute arbitrary code. The vulnerability is due to improper validation of message contents. An attacker could exploit this vulnerability by sending specially crafted Extensible Messaging and Presence Protocol (XMPP) messages to the affected software. A successful exploit could allow the attacker to cause the application to execute arbitrary programs on the targeted system with the privileges of the user account that is running the Cisco Jabber client software, possibly resulting in arbitrary code execution.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the REST API endpoint of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to elevate privileges on the application. The vulnerability is due to insufficient access control validation. An attacker could exploit this vulnerability by authenticating with a low-privilege account and sending a crafted request to the API. A successful exploit could allow the attacker to interact with the API with administrative privileges.

A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected system. The vulnerability exists because the web-based management interface improperly validates values within SQL queries. An attacker could exploit this vulnerability by authenticating to the application and sending malicious SQL queries to an affected system. A successful exploit could allow the attacker to modify values on or return values from the underlying database or the operating system.

A vulnerability in Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an authenticated, remote attacker with low privileges to execute arbitrary code on an affected device. This vulnerability is due to improper path validation. An attacker could exploit this vulnerability by using the Secure Copy Protocol (SCP) to upload malicious code to an affected device using path traversal techniques. A successful exploit could allow the attacker to execute arbitrary code in a specific container with the privileges of root.

A vulnerability in the REST API and web UI of Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an authenticated, low-privileged, remote attacker to perform a command injection attack against an affected device.   This vulnerability is due to improper user authorization and insufficient validation of command arguments. An attacker could exploit this vulnerability by submitting crafted commands to an affected REST API endpoint or through the web UI. A successful exploit could allow the attacker to execute arbitrary commands on the CLI of a Cisco NDFC-managed device with network-admin privileges.   Note: This vulnerability does not affect Cisco NDFC when it is configured for storage area network (SAN) controller deployment.