In Directus 8.x through 8.8.1, an attacker can discover whether a user is present in the database through the password reset feature. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Symfony is a PHP framework for web and console applications and a set of reusable PHP components. The ability to enumerate users was possible without relevant permissions due to different handling depending on whether the user existed or not when attempting to use the switch users functionality. We now ensure that 403s are returned whether the user exists or not if a user cannot switch to a user or if the user does not exist. The patch for this issue is available for branch 3.4.

SummaryThis advisory addresses a security vulnerability in Mautic related to the "Forget your password" functionality. This vulnerability could be exploited by unauthenticated users to enumerate valid usernames. User Enumeration via Timing Attack: A user enumeration vulnerability exists in the "Forget your password" functionality. Differences in response times for existing and non-existing users, combined with a lack of request limiting, allow an attacker to determine the existence of usernames through a timing-based attack. MitigationPlease update to a version that addresses this timing vulnerability, where password reset responses are normalized to respond at the same time regardless of user existence.

Fides is an open-source privacy engineering platform. Prior to version 2.44.0, a timing-based username enumeration vulnerability exists in Fides Webserver authentication. This vulnerability allows an unauthenticated attacker to determine the existence of valid usernames by analyzing the time it takes for the server to respond to login requests. The discrepancy in response times between valid and invalid usernames can be leveraged to enumerate users on the system. This vulnerability enables a timing-based username enumeration attack. An attacker can systematically guess and verify which usernames are valid by measuring the server's response time to authentication requests. This information can be used to conduct further attacks on authentication such as password brute-forcing and credential stuffing. The vulnerability has been patched in Fides version `2.44.0`. Users are advised to upgrade to this version or later to secure their systems against this threat. There are no workarounds.

ManageEngine ADSelfService Plus below build 6116 contains an observable response discrepancy in the UMCP operation of the ChangePasswordAPI. This allows an unauthenticated remote attacker to determine whether a Windows domain user exists.

An issue was discovered in One Identity Password Manager 5.8. An attacker could enumerate valid answers for a user. It is possible for an attacker to detect a valid answer based on the HTTP response content, and reuse this answer later for a password reset on a chosen password. The enumeration is possible because, within the HTTP response content, WRONG ID is only returned when the answer is incorrect.

LabVantage LIMS 8.3 does not properly maintain the confidentiality of database names. For example, the web application exposes the database name. An attacker might be able to enumerate database names by providing his own database name in a request, because the response will return an 'Unrecognized Database exception message if the database does not exist.

Versions before 8.9.1, Various resources in Jira responded with a 404 instead of redirecting unauthenticated users to the login page, in some situations this may have allowed unauthorised attackers to determine if certain resources exist or not through an Information Disclosure vulnerability.

User enumeration in Nagvis' Checkmk MultisiteAuth before version 1.9.48 allows an unauthenticated attacker to enumerate Checkmk usernames.

IBM Cognos Controller 10.4.1, 10.4.2, and 11.0.0 could allow a remote user to enumerate usernames due to differentiating error messages on existing usernames. IBM X-Force ID: 199181.

An exposure of sensitive information vulnerability exists in TCExam <= 14.8.1. If a password reset request was made for an email address that was not registered with a user then we would be presented with an ‘unknown email’ error. If an email is given that is registered with a user then this error will not appear. A malicious actor could abuse this to enumerate the email addresses of

An issue was discovered in UTI Mutual fund Android application 5.4.18 and prior, allows attackers to brute force enumeration of usernames determined by the error message returned after invalid credentials are attempted.

Enumeration of ERC from object entry in Liferay Portal 7.4.0 through 7.4.3.128, and Liferay DXP 2024.Q3.0 through 2024.Q3.1, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.12, 2023.Q4.0 and 7.4 GA through update 92 allow attackers to determine existent ERC in the application by exploit the time response.

A vulnerability in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to enumerate user accounts. This vulnerability is due to the improper handling of HTTP headers. An attacker could exploit this vulnerability by sending authenticated requests to an affected system. A successful exploit could allow the attacker to compare the HTTP responses that are returned by the affected system to determine which accounts are valid user accounts.

User enumeration vulnerability in Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2024.Q4.0 through 2024.Q4.7, 2024.Q3.0 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.14, 2023.Q4.0 through 2023.Q4.10, 2023.Q3.1 through 2023.Q3.10 and 7.4 GA through update 92 allows remote attackers to determine if an account exist in the application via the create account page.

An issue was discovered in AvertX Auto focus Night Vision HD Indoor/Outdoor IP Dome Camera HD838 and Night Vision HD Indoor/Outdoor Mini IP Bullet Camera HD438. Failed web UI login attempts elicit different responses depending on whether a user account exists. Because the responses indicate whether a submitted username is valid or not, they make it easier to identify legitimate usernames. If a login request is sent to ISAPI/Security/sessionLogin/capabilities using a username that exists, it will return the value of the salt given to that username, even if the password is incorrect. However, if a login request is sent using a username that is not present in the database, it will return an empty salt value. This allows attackers to enumerate legitimate usernames, facilitating brute-force attacks. NOTE: this is different from CVE-2020-7057.

Meow hash 0.5/calico does not sufficiently thwart key recovery by an attacker who can query whether there's a collision in the bottom bits of the hashes of two messages, as demonstrated by an attack against a long-running web service that allows the attacker to infer collisions by measuring timing differences.

Loway - CWE-204: Observable Response Discrepancy

In veilid-core in Veilid before 0.3.4, the protocol's ping function can be misused in a way that decreases the effectiveness of safety and private routes.

IBM TXSeries for Multiplatforms 10.1 could allow an attacker to determine valid usernames due to an observable timing discrepancy which could be used in further attacks against the system.

ownCloud Guests before 0.12.5 allows unauthenticated user enumeration via the /apps/guests/register/{email}/{token} endpoint. Because of insufficient validation of the supplied token in showPasswordForm, the server responds differently when an e-mail address corresponds to a valid pending guest user rather than a non-existent user.

Zitadel is an open source identity management system. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". Due to a implementation change to prevent deadlocks calling the database, the flag would not be correctly respected in all cases and an attacker would gain information if an account exist within ZITADEL, since the error message shows "object not found" instead of the generic error message. This vulnerability is fixed in 2.58.1, 2.57.1, 2.56.2, 2.55.5, 2.54.8, and 2.53.9.

In the Twilio Authy API, accessed by Authy Android before 25.1.0 and Authy iOS before 26.1.0, an unauthenticated endpoint provided access to certain phone-number data, as exploited in the wild in June 2024. Specifically, the endpoint accepted a stream of requests containing phone numbers, and responded with information about whether each phone number was registered with Authy. (Authy accounts were not compromised, however.)

Matrix Tafnit v8 - CWE-204: Observable Response Discrepancy

Shenzhen Guoxin Synthesis image system before 8.3.0 allows username enumeration because of the response discrepancy of incorrect versus error.

An issue in Austrian Academy of Sciences (AW) Austrian Archaeological Institute OpenAtlas v.8.12.0 allows a remote attacker to obtain sensitive information via the login error messages

In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109, an attacker could determine whether or not another user exists on the instance by deciphering the error response that they would likely receive from the instance when they attempt to log in. This disclosure could then lead to additional brute-force password-guessing attacks. This vulnerability would require that the Splunk platform instance uses the Security Assertion Markup Language (SAML) authentication scheme.

An observable response discrepancy vulnerability [CWE-204] in FortiClientEMS 7.4.0, 7.2.0 through 7.2.4, 7.0 all versions, and FortiSOAR 7.5.0, 7.4.0 through 7.4.4, 7.3.0 through 7.3.2, 7.2 all versions, 7.0 all versions, 6.4 all versions may allow an unauthenticated attacker to enumerate valid users via observing login request responses.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to versions 8.6.54 and 9.6.0-alpha.43, an attacker can subscribe to LiveQuery with a watch parameter targeting a protected field. Although the protected field value is properly stripped from event payloads, the presence or absence of update events reveals whether the protected field changed, creating a binary oracle. For boolean protected fields, the timing of change events is equivalent to knowing the field value. This issue has been patched in versions 8.6.54 and 9.6.0-alpha.43.

IBM Control Center 6.2.1 and 6.3.1 could allow a remote attacker to enumerate usernames due to an observable discrepancy between login attempts.

User enumeration vulnerability in ORDAT FOSS-Online before v2.24.01 allows attackers to determine if an account exists in the application by comparing the server responses of the forgot password functionality.

IBM i 7.2, 7.3, 7.4, and 7.5 Service Tools Server (SST) is vulnerable to SST user enumeration by a remote attacker. This vulnerability can be used by a malicious actor to gather information about SST users that can be targeted in further attacks. IBM X-Force ID: 287538.

In Logpoint before 7.4.0, an attacker can enumerate a valid list of usernames by using publicly exposed URLs of shared widgets.

The Stop User Enumeration WordPress plugin before version 1.7.3 blocks REST API /wp-json/wp/v2/users/ requests for non-authorized users. However, this can be bypassed by URL-encoding the API path.

Observable Timing Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

Observable Discrepancy in GitHub repository healthchecks/healthchecks prior to v2.6.

Liferay Portal 7.2.0 through 7.4.1, and older unsupported versions, and Liferay DXP 7.3 before service pack 3, 7.2 before fix pack 18, and older unsupported versions returns with different responses depending on whether a site does not exist or if the user does not have permission to access the site, which allows remote attackers to discover the existence of sites by enumerating URLs. This vulnerability occurs if locale.prepend.friendly.url.style=2 and if a custom 404 page is used.

Umbraco is a free and open source .NET content management system. Starting in version 14.0.0 and prior to versions 14.3.2 and 15.1.2, it's possible to determine whether an account exists based on an analysis of response codes and timing of Umbraco management API responses. Versions 14.3.2 and 15.1.2 contain a patch. No known workarounds are available.

Jenkins GitLab Plugin 1.5.35 and earlier uses a non-constant time comparison function when checking whether the provided and expected webhook token are equal, potentially allowing attackers to use statistical methods to obtain a valid webhook token.

Jenkins Generic Webhook Trigger Plugin 1.84.1 and earlier uses a non-constant time comparison function when checking whether the provided and expected webhook token are equal, potentially allowing attackers to use statistical methods to obtain a valid webhook token.

An issue was discovered in MediaWiki before 1.35.8, 1.36.x and 1.37.x before 1.37.5, and 1.38.x before 1.38.3. HTMLUserTextField exposes the existence of hidden users.

User enumeration can occur in the Authentication REST API in Delinea PAM Secret Server 11.4. This allows a remote attacker to determine whether a user is valid because of a difference in responses from the /oauth2/token endpoint.

User enumeration vulnerability in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 8, 7.2 before fix pack 20, and older unsupported versions allows remote attackers to determine if an account exist in the application by comparing the request's response time.

Observable Response Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

In the Voatz application 2020-01-01 for Android, the amount of data transmitted during a single voter's vote depends on the different lengths of the metadata across the available voting choices, which makes it easier for remote attackers to discover this voter's choice by sniffing the network. For example, a small amount of sniffed data may indicate that a vote was cast for the candidate with the least metadata. An active man-in-the-middle attacker can leverage this behavior to disrupt voters' abilities to vote for a candidate opposed by the attacker.

Kanboard is project management software that focuses on the Kanban methodology. Prior to version 1.2.46, Kanboard is vulnerable to username enumeration and IP spoofing-based brute-force protection bypass. By analyzing login behavior and abusing trusted HTTP headers, an attacker can determine valid usernames and circumvent rate-limiting or blocking mechanisms. Any organization running a publicly accessible Kanboard instance is affected, especially if relying on IP-based protections like Fail2Ban or CAPTCHA for login rate-limiting. Attackers with access to the login page can exploit this flaw to enumerate valid usernames and bypass IP-based blocking mechanisms, putting all user accounts at higher risk of brute-force or credential stuffing attacks. Version 1.2.46 contains a patch for the issue.

Umbraco is an ASP.NET content management system. Umbraco 10 prior to 10.8.4 with access to the native login screen is vulnerable to a possible user enumeration attack. This issue was fixed in version 10.8.5. As a workaround, one may disable the native login screen by exclusively using external logins.

Observable Response Discrepancy vulnerability in Tridium Niagara Framework on Windows, Linux, QNX, Tridium Niagara Enterprise Security on Windows, Linux, QNX allows Cryptanalysis. This issue affects Niagara Framework: before 4.14.2, before 4.15.1, before 4.10.11; Niagara Enterprise Security: before 4.14.2, before 4.15.1, before 4.10.11.Tridium recommends upgrading to Niagara Framework and Enterprise Security versions 4.14.2u2, 4.15.u1, or 4.10u.11.

Snipe-IT through 6.0.14 allows attackers to check whether a user account exists because of response variations in a /password/reset request.

The Page Restriction WordPress (WP) – Protect WP Pages/Post plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.3.6 via the WordPress core search feature. This makes it possible for unauthenticated attackers to extract sensitive data from posts that have been restricted to higher-level roles such as administrator.