Envoy is a cloud-native, open source edge and service proxy. The HTTP/2 protocol stack in Envoy versions prior to 1.29.3, 1.28.2, 1.27.4, and 1.26.8 are vulnerable to CPU exhaustion due to flood of CONTINUATION frames. Envoy's HTTP/2 codec allows the client to send an unlimited number of CONTINUATION frames even after exceeding Envoy's header map limits. This allows an attacker to send a sequence of CONTINUATION frames without the END_HEADERS bit set causing CPU utilization, consuming approximately 1 core per 300Mbit/s of traffic and culminating in denial of service through CPU exhaustion. Users should upgrade to version 1.29.3, 1.28.2, 1.27.4, or 1.26.8 to mitigate the effects of the CONTINUATION flood. As a workaround, disable HTTP/2 protocol for downstream connections.

Envoy is a high-performance edge/middle/service proxy. Prior to 1.37.1, 1.36.5, 1.35.8, and 1.34.13, an off-by-one write in Envoy::JsonEscaper::escapeString() can corrupt std::string null-termination, causing undefined behavior and potentially leading to crashes or out-of-bounds reads when the resulting string is later treated as a C-string. This vulnerability is fixed in 1.37.1, 1.36.5, 1.35.8, and 1.34.13.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may exhaust file descriptors and/or memory when accepting too many connections.

The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.

Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 secompressors accumulate decompressed data into an intermediate buffer before overwriting the body in the decode/encodeBody. This may allow an attacker to zip bomb the decompressor by sending a small highly compressed payload. Maliciously constructed zip files may exhaust system memory and cause a denial of service. Users are advised to upgrade. Users unable to upgrade may consider disabling decompression.

Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy’s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.

Envoy is a cloud-native, open source edge and service proxy. Envoy exposed an out-of-memory (OOM) vector from the mirror response, since async HTTP client will buffer the response with an unbounded buffer.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may consume excessive amounts of memory when proxying HTTP/2 requests or responses with many small (i.e. 1 byte) data frames.

Upon receiving each incoming request header data, Envoy will iterate over existing request headers to verify that the total size of the headers stays below a maximum limit. The implementation in versions 1.10.0 through 1.11.1 for HTTP/1.x traffic and all versions of Envoy for HTTP/2 traffic had O(n^2) performance characteristics. A remote attacker may craft a request that stays below the maximum request header size but consists of many thousands of small headers to consume CPU and result in a denial-of-service attack.

An issue was discovered in OWASP ModSecurity Core Rule Set (CRS) through 3.1.0. /rules/REQUEST-933-APPLICATION-ATTACK-PHP.conf allows remote attackers to cause a denial of service (ReDOS) by entering a specially crafted string with set_error_handler# at the beginning and nested repetition operators. NOTE: the software maintainer disputes that this is a vulnerability because the issue cannot be exploited via ModSecurity

Dell PowerScale nodes A200, A2000, H400, H500, H600, H5600, F800, F810 integrated hardware management software contains an uncontrolled resource consumption vulnerability. This may allow an unauthenticated network host to impair built-in hardware management functionality and trigger OneFS data protection mechanism causing a denial of service.

The integrated ICMP service of the network stack of affected devices can be forced to exhaust its available memory resources when receiving specially crafted messages targeting IP fragment re-assembly. This could allow an unauthenticated remote attacker to cause a temporary denial of service condition of the ICMP service, other communication services are not affected. Affected devices will resume normal operation after the attack terminates.

A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 3). The affected application does not properly restrict the size of generated log files. This could allow an unauthenticated remote attacker to trigger a large amount of logged events to exhaust the system's resources and create a denial of service condition.

OpenTelemetry.Exporter.Zipkin is the .NET Zipkin exporter for OpenTelemetry. In versions 1.15.2 and earlier, the Zipkin exporter remote endpoint cache accepts unbounded key growth derived from span attributes. In high-cardinality scenarios, a process using Zipkin export for client or producer spans could experience avoidable memory growth under sustained unique remote endpoint values, increasing process memory usage over time and degrading availability. This issue is fixed in version 1.15.3, which introduces a bounded, thread-safe LRU cache for remote endpoints with a fixed maximum size.

An issue was discovered in OWASP ModSecurity Core Rule Set (CRS) through 3.1.0. /rules/REQUEST-942-APPLICATION-ATTACK-SQLI.conf allows remote attackers to cause a denial of service (ReDOS) by entering a specially crafted string with nested repetition operators.

In PHP versions 7.2.x below 7.2.31, 7.3.x below 7.3.18 and 7.4.x below 7.4.6, when HTTP file uploads are allowed, supplying overly long filenames or field names could lead PHP engine to try to allocate oversized memory storage, hit the memory limit and stop processing the request, without cleaning up temporary files created by upload request. This potentially could lead to accumulation of uncleaned temporary files exhausting the disk space on the target server.

A vulnerability exists in the affected product that allows a malicious user to restart the Rockwell Automation PanelView™ Plus 7 terminal remotely without security protections. If the vulnerability is exploited, it could lead to the loss of view or control of the PanelView™ product.

A vulnerability in the SSH server of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition for the SSH server of an affected device. This vulnerability is due to a logic error when an SSH session is established. An attacker could exploit this vulnerability by sending crafted SSH messages to an affected device. A successful exploit could allow the attacker to exhaust available SSH resources on the affected device so that new SSH connections to the device are denied, resulting in a DoS condition. Existing SSH connections to the device would continue to function normally. The device must be rebooted manually to recover. However, user traffic would not be impacted and could be managed using a remote application such as Cisco Adaptive Security Device Manager (ASDM).

A vulnerability in system resource management in Cisco UCS 6400 and 6500 Series Fabric Interconnects that are in Intersight Managed Mode (IMM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the Device Console UI of an affected device. This vulnerability is due to insufficient rate-limiting of TCP connections to an affected device. An attacker could exploit this vulnerability by sending a high number of TCP packets to the Device Console UI. A successful exploit could allow an attacker to cause the Device Console UI process to crash, resulting in a DoS condition. A manual reload of the fabric interconnect is needed to restore complete functionality.

All versions of package express-validators are vulnerable to Regular Expression Denial of Service (ReDoS) when validating specifically-crafted invalid urls.

The Calculated Fields Form plugin for WordPress is vulnerable to Denial of Service in all versions up to, and including, 5.2.63. This is due to unlimited height and width parameters for CAPTCHA images. This makes it possible for unauthenticated attackers to send multiple requests with large values, resulting in slowing server resources if the server does not mitigate Denial of Service attacks.

When an SSL profile is configured on a Virtual Server, undisclosed traffic can cause an increase in CPU or SSL accelerator resource utilization.   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

In Apache HTTP server versions 2.4.37 and prior, by sending request bodies in a slow loris way to plain resources, the h2 stream for that request unnecessarily occupied a server thread cleaning up that incoming data. This affects only HTTP/2 (mod_http2) connections.

Vulnerability in the Oracle Health Sciences InForm product of Oracle Health Sciences Applications (component: Core). Supported versions that are affected are Prior to 6.3.1.3 and Prior to 7.0.0.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Health Sciences InForm. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Health Sciences InForm. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).

An issue has been discovered in GitLab affecting all versions starting from 9.0 before 15.7.8, all versions starting from 15.8 before 15.8.4, all versions starting from 15.9 before 15.9.2. It was possible to trigger a resource depletion attack due to improper filtering for number of requests to read commits details.

supybot-fedora implements the command 'refresh', that refreshes the cache of all users from FAS. This takes quite a while to run, and zodbot stops responding to requests during this time.

Memory exhaustion in the Kafka protocol dissector in Wireshark 4.0.0 to 4.0.1 and 3.6.0 to 3.6.9 allows denial of service via packet injection or crafted capture file

Nextcloud Server is an open source personal cloud server. Prior to versions 23.0.10 and 24.0.5, calendar name lengths are not validated before writing to a database. As a result, an attacker can send unnecessary amounts of data against the database. Version 23.0.10 and 24.0.5 contain patches for the issue. No known workarounds are available.

react/http is an event-driven, streaming HTTP client and server implementation for ReactPHP. Previous versions of ReactPHP's HTTP server component contain a potential DoS vulnerability that can cause high CPU load when processing large HTTP request bodies. This vulnerability has little to no impact on the default configuration, but can be exploited when explicitly using the RequestBodyBufferMiddleware with very large settings. This might lead to consuming large amounts of CPU time for processing requests and significantly delay or slow down the processing of legitimate user requests. This issue has been addressed in release 1.9.0. Users are advised to upgrade. Users unable to upgrade may keep the request body limited using RequestBodyBufferMiddleware with a sensible value which should mitigate the issue. An infrastructure or DevOps workaround could be to place a reverse proxy in front of the ReactPHP HTTP server to filter out any excessive HTTP request bodies.

An uncontrolled resource consumption issue when parsing URLs in GitLab CE/EE affecting all versions prior to 15.3.5, 15.4 prior to 15.4.4, and 15.5 prior to 15.5.2 allows an attacker to cause performance issues and potentially a denial of service on the GitLab instance.

Rack is a modular Ruby web server interface. Prior to versions 2.2.23, 3.1.21, and 3.2.6, Rack::Utils.select_best_encoding processes Accept-Encoding values with quadratic time complexity when the header contains many wildcard (*) entries. Because this method is used by Rack::Deflater to choose a response encoding, an unauthenticated attacker can send a single request with a crafted Accept-Encoding header and cause disproportionate CPU consumption on the compression middleware path. This results in a denial of service condition for applications using Rack::Deflater. This issue has been patched in versions 2.2.23, 3.1.21, and 3.2.6.

LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. Prior to 10.25.3, the replace filter in LiquidJS incorrectly accounts for memory usage when the memoryLimit option is enabled. It charges str.length + pattern.length + replacement.length bytes to the memory limiter, but the actual output from str.split(pattern).join(replacement) can be quadratically larger when the pattern occurs many times in the input string. This allows an attacker who controls template content to bypass the memoryLimit DoS protection with approximately 2,500x amplification, potentially causing out-of-memory conditions. This vulnerability is fixed in 10.25.3.

A vulnerability was found in JWCrypto. This flaw allows an attacker to cause a denial of service (DoS) attack and possible password brute-force and dictionary attacks to be more resource-intensive. This issue can result in a large amount of computational consumption, causing a denial of service attack.

An issue in Hostbill v.2025-11-24 and 2025-12-01 allows a remote attacker to cause a denial of service via the Checkout Authentication Flow component

melange allows users to build apk packages using declarative pipelines. In version 0.40.5 and prior, melange update-cache downloads URIs from build configs via io.Copy without any size limit or HTTP client timeout (pkg/renovate/cache/cache.go). An attacker-controlled URI in a melange config can cause unbounded disk writes, exhausting disk on the build runne. Version 0.43.4 contains a patch.

Mattermost Mobile fails to limit the maximum number of Markdown elements in a post allowing an attacker to send a post with hundreds of emojis to a channel and freeze the mobile app of users when viewing that particular channel. 

A mail message containing excessive amount of RFC 2231 MIME parameters causes LMTP to use too much CPU. A suitably formatted mail message causes mail delivery process to consume large amounts of CPU time. Use MTA capabilities to limit RFC 2231 MIME parameters in mail messages, or upgrade to fixed version where the processing is limited. No publicly available exploits are known.

The resolver in nginx before 1.8.1 and 1.9.x before 1.9.10 does not properly limit CNAME resolution, which allows remote attackers to cause a denial of service (worker process resource consumption) via vectors related to arbitrary name resolution.

RSSHub is an open source, extensible RSS feed generator. In commits prior to 5c4177441417 passing some special values to the `filter` and `filterout` parameters can cause an abnormally high CPU. This results in an impact on the performance of the servers and RSSHub services which may lead to a denial of service. This issue has been fixed in commit 5c4177441417 and all users are advised to upgrade. There are no known workarounds for this issue.

Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 4.3.0 and prior to version 4.14.3, a Denial of Service (DoS) vulnerability exists in the Wazuh API authentication middleware (`middlewares.py`). The application uses an asynchronous event loop (Starlette/Asyncio) to call a synchronous function (`generate_keypair`) that performs blocking disk I/O on every request containing a Bearer token. An unauthenticated remote attacker can exploit this by flooding the API with requests containing invalid Bearer tokens. This forces the single-threaded event loop to pause for file read operations repeatedly, starving the application of CPU resources and potentially preventing it from accepting or processing legitimate connections. Version 4.14.3 fixes the issue.

The vCenter Server contains a denial-of-service vulnerability in the content library service. A malicious actor with network access to port 443 on vCenter Server may exploit this issue to trigger a denial-of-service condition by sending a specially crafted header.

In CODESYS Gateway Server V2 an insufficient check for the activity of TCP client connections allows an unauthenticated attacker to consume all available TCP connections and prevent legitimate users or clients from establishing a new connection to the CODESYS Gateway Server V2. Existing connections are not affected and therefore remain intact.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, Magick fails to check for multi-layer nested mvg conversions to svg, leading to DoS. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products.

Spring MVC and WebFlux applications are vulnerable to Denial of Service attacks when resolving static resources. More precisely, an application can be vulnerable when all the following are true: * the application is using Spring MVC or Spring WebFlux * the application is serving static resources from the file system * the application is running on a Windows platform When all the conditions above are met, the attacker can send malicious requests that are slow to resolve and that can keep HTTP connections in use. This can cause a Denial of Service on the application.

FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.224, the FreeScout helpdesk application does not enforce rate limiting on the file upload endpoint. Any user can flood the server with upload requests, leading to database overload and potential denial of service for all users. Version 1.8.224 contains a fix.