In FreeBSD 12.0-STABLE before r350828, 12.0-RELEASE before 12.0-RELEASE-p10, 11.3-STABLE before r350829, 11.3-RELEASE before 11.3-RELEASE-p3, and 11.2-RELEASE before 11.2-RELEASE-p14, a missing check in the function to arrange data in a chain of mbufs could cause data returned not to be contiguous. Extra checks in the IPv6 stack could catch the error condition and trigger a kernel panic, leading to a remote denial of service.

A vulnerability in the email parsing module Clam AntiVirus (ClamAV) Software versions 0.102.0, 0.101.4 and prior could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to inefficient MIME parsing routines that result in extremely long scan times of specially formatted email files. An attacker could exploit this vulnerability by sending a crafted email file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process to scan the crafted email file indefinitely, resulting in a denial of service condition.

All versions of package lite-server are vulnerable to Denial of Service (DoS) when an attacker sends an HTTP request and includes control characters that the decodeURI() function is unable to parse.

A vulnerability has been identified in SCALANCE X302-7 EEC (230V), SCALANCE X302-7 EEC (230V, coated), SCALANCE X302-7 EEC (24V), SCALANCE X302-7 EEC (24V, coated), SCALANCE X302-7 EEC (2x 230V), SCALANCE X302-7 EEC (2x 230V, coated), SCALANCE X302-7 EEC (2x 24V), SCALANCE X302-7 EEC (2x 24V, coated), SCALANCE X304-2FE, SCALANCE X306-1LD FE, SCALANCE X307-2 EEC (230V), SCALANCE X307-2 EEC (230V, coated), SCALANCE X307-2 EEC (24V), SCALANCE X307-2 EEC (24V, coated), SCALANCE X307-2 EEC (2x 230V), SCALANCE X307-2 EEC (2x 230V, coated), SCALANCE X307-2 EEC (2x 24V), SCALANCE X307-2 EEC (2x 24V, coated), SCALANCE X307-3, SCALANCE X307-3, SCALANCE X307-3LD, SCALANCE X307-3LD, SCALANCE X308-2, SCALANCE X308-2, SCALANCE X308-2LD, SCALANCE X308-2LD, SCALANCE X308-2LH, SCALANCE X308-2LH, SCALANCE X308-2LH+, SCALANCE X308-2LH+, SCALANCE X308-2M, SCALANCE X308-2M, SCALANCE X308-2M PoE, SCALANCE X308-2M PoE, SCALANCE X308-2M TS, SCALANCE X308-2M TS, SCALANCE X310, SCALANCE X310, SCALANCE X310FE, SCALANCE X310FE, SCALANCE X320-1 FE, SCALANCE X320-1-2LD FE, SCALANCE X408-2, SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on front), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (230V, ports on rear), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on front), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M (24V, ports on rear), SCALANCE XR324-12M TS (24V), SCALANCE XR324-12M TS (24V), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on front), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (24V, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on front), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 100-240VAC/60-250VDC, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on front), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M EEC (2x 24V, ports on rear), SCALANCE XR324-4M PoE (230V, ports on front), SCALANCE XR324-4M PoE (230V, ports on rear), SCALANCE XR324-4M PoE (24V, ports on front), SCALANCE XR324-4M PoE (24V, ports on rear), SCALANCE XR324-4M PoE TS (24V, ports on front), SIPLUS NET SCALANCE X308-2. Affected devices do not properly validate the HTTP headers of incoming requests. This could allow an unauthenticated remote attacker to crash affected devices.

A vulnerability exists in the HCI IEC 60870-5-104 function included in certain versions of the RTU500 series product. The vulnerability can only be exploited, if the HCI 60870-5-104 is configured with support for IEC 62351-5 and the CMU contains the license feature ‘Advanced security’ which must be ordered separately. If these preconditions are fulfilled, an attacker could exploit the vulnerability by sending a specially crafted message to the RTU500, causing the targeted RTU500 CMU to reboot. The vulnerability is caused by a missing input data validation which eventually if exploited causes an internal buffer to overflow in the HCI IEC 60870-5-104 function.

A vulnerability exists in kernel/time/clocksource.c in the Linux kernel before 2.6.34 where on non-GENERIC_TIME systems (GENERIC_TIME=n), accessing /sys/devices/system/clocksource/clocksource0/current_clocksource results in an OOPS.

Insufficient validation of the IOCTL input buffer in AMD μProf may allow an attacker to send an arbitrary buffer leading to a potential Windows kernel crash resulting in denial of service.

Input verification vulnerability in the system service module Impact: Successful exploitation of this vulnerability will affect availability.

Squid is an open source caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. Due to Input Validation, Premature Release of Resource During Expected Lifetime, and Missing Release of Resource after Effective Lifetime bugs, Squid is vulnerable to Denial of Service attacks by a trusted server against all clients using the proxy. This bug is fixed in the default build configuration of Squid version 6.10.

Dell iDRAC8 versions prior to 2.83.83.83 contain a denial of service vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability to cause resource exhaustion in the webserver, resulting in a denial of service condition.

An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) a signed object containing an empty signedAttributes field. Fort accesses the set's elements without sanitizing it first. Because Fort is an RPKI Relying Party, a crash can lead to Route Origin Validation unavailability, which can lead to compromised routing.

Improper input validation in some Zoom Apps before version 6.2.0 may allow an unauthenticated user to conduct a denial of service via network access.

An issue was discovered on Xiaomi DGNWG03LM, ZNCZ03LM, MCCGQ01LM, RTCGQ01LM devices. Attackers can utilize the "discover ZigBee network procedure" to perform a denial of service attack.

Mapserver 5.2, 5.4 and 5.6 before 5.6.5-2 improperly validates symbol index values during Mapfile parsing.

An Improper Input Validation vulnerability exists in Trihedral VTScada version 12.0.38 and prior. A specifically malformed HTTP request could cause the affected VTScada to crash. Both local area network (LAN)-only and internet facing systems are affected.

headerv2.go in mastercactapus proxyprotocol before 0.0.2, as used in the mastercactapus caddy-proxyprotocol plugin through 0.0.2 for Caddy, allows remote attackers to cause a denial of service (webserver panic and daemon crash) via a crafted HAProxy PROXY v2 request with truncated source/destination address data.

The Synergy Systems & Solutions PLC & RTU system has a vulnerability in HUSKY RTU 6049-E70 firmware versions 5.0 and prior. Specially crafted malicious packets could cause disconnection of active authentic connections or reboot of device. This is a different issue than CVE-2019-16879 and CVE-2019-20046.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.

A vulnerability has been identified in SiNVR/SiVMS Video Server (All versions < V5.0.0), SiNVR/SiVMS Video Server (All versions >= V5.0.0 < V5.0.2). The streaming service (default port 5410/tcp) of the SiVMS/SiNVR Video Server contains a input validation vulnerability, that could allow an unauthenticated remote attacker to cause a Denial-of-Service condition by sending malformed HTTP requests.

A flaw was found in Undertow. Servlets using a method that calls HttpServletRequestImpl.getParameterNames() can cause an OutOfMemoryError when the client sends a request with large parameter names. This issue can be exploited by an unauthorized user to cause a remote denial-of-service (DoS) attack.

The SIP module of some Huawei products have a denial of service (DoS) vulnerability. A remote attacker could exploit these three vulnerabilities by sending the specially crafted messages to the affected device. Due to the insufficient verification of the packets, successful exploit could allow the attacker to cause buffer overflow and dead loop, leading to DoS condition. Affected products can be found in https://www.huawei.com/en/psirt/security-advisories/huawei-sa-20200115-01-sip-en.

A vulnerability has been found in Dahua products.Attackers can send carefully crafted data packets to the interface with vulnerabilities, causing the device to crash.

The device may enter into error state when some tool or application gets failure at 1st buffer map all and performs 2nd buffer map which happens to be at same physical address in Snapdragon Auto, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music in MDM9607, Nicobar, Rennell, SA6155P, SDM660, SDX55, SM6150, SM7150, SM8150, SM8250, SXR2130

A flaw was found in Undertow that can cause remote denial of service attacks. When the server uses the FormEncodedDataDefinition.doParse(StreamSourceChannel) method to parse large form data encoding with application/x-www-form-urlencoded, the method will cause an OutOfMemory issue. This flaw allows unauthorized users to cause a remote denial of service (DoS) attack.

Improper input validation in CVC5 Solver v1.1.3 allows attackers to cause a Denial of Service (DoS) via a crafted SMT2 input file.

An issue was discovered on Xiaomi DGNWG03LM, ZNCZ03LM, MCCGQ01LM, WSDCGQ01LM, RTCGQ01LM devices. Attackers can use the ZigBee trust center rejoin procedure to perform mutiple denial of service attacks.

Windows Standards-Based Storage Management Service Denial of Service Vulnerability

.NET and Visual Studio Denial of Service Vulnerability

An issue was discovered on ASUS HG100, MW100, WS-101, TS-101, AS-101, MS-101, DL-101 devices using ZigBee PRO. Attackers can use the ZigBee trust center rejoin procedure to perform mutiple denial of service attacks.

An issue was discovered on ASUS HG100, MW100, WS-101, TS-101, AS-101, MS-101, DL-101 devices using ZigBee PRO. Attackers can utilize the "discover ZigBee network procedure" to perform a denial of service attack.

dd-trace-cpp is the Datadog distributed tracing for C++. When the library fails to extract trace context due to malformed unicode, it logs the list of audited headers and their values using the `nlohmann` JSON library. However, due to the way the JSON library is invoked, it throws an uncaught exception, which results in a crash. This vulnerability has been patched in version 0.2.2.

In BIG-IP Versions 16.1.x before 16.1.3.1 and 15.1.x before 15.1.6.1, and all versions of BIG-IQ 8.x, when the Data Plane Development Kit (DPDK)/Elastic Network Adapter (ENA) driver is used with BIG-IP or BIG-IQ on Amazon Web Services (AWS) systems, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate. Successful exploitation relies on conditions outside of the attacker's control. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Pexip Infinity before 35.0 has improper input validation that allows remote attackers to trigger a denial of service (software abort) via a crafted signalling message.

A vulnerability in Unified Threat Defense (UTD) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper validation of IPv6 packets through the UTD feature. An attacker could exploit this vulnerability by sending IPv6 traffic through an affected device that is configured with UTD. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the Raw Socket Transport feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper parsing of Raw Socket Transport payloads. An attacker could exploit this vulnerability by establishing a TCP session and then sending a malicious TCP segment via IPv4 to an affected device. This cannot be exploited via IPv6, as the Raw Socket Transport feature does not support IPv6 as a network layer protocol.

An issue in the oneflow.scatter_nd parameter OneFlow-Inc. Oneflow v0.9.1 allows attackers to cause a Denial of Service (DoS) when index parameter exceeds the range of shape.

A vulnerability in the IOx application environment of multiple Cisco platforms could allow an unauthenticated, remote attacker to cause the IOx web server to stop processing HTTPS requests, resulting in a denial of service (DoS) condition. The vulnerability is due to a Transport Layer Security (TLS) implementation issue. An attacker could exploit this vulnerability by sending crafted TLS packets to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing HTTPS requests, resulting in a DoS condition.

A flaw was found in 389-ds-base. A specially-crafted LDAP query can potentially cause a failure on the directory server, leading to a denial of service

An issue in OneFlow-Inc. Oneflow v0.9.1 allows attackers to cause a Denial of Service (DoS) when index as a negative number exceeds the range of size.

On BIG-IP version 16.1.x before 16.1.2, 15.1.x before 15.1.4.1, 14.1.x before 14.1.4.4, and all versions of 13.1.x and 12.1.x, when a message routing type virtual server is configured with both Diameter Session and Router Profiles, undisclosed traffic can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

MileSight DeviceHub - CWE-20 Improper Input Validation may allow Denial of Service

An Improper Input Validation vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker to cause a Denial of Service (DoS). If a BGP update message is received over an established BGP session, and that message contains a specific, optional transitive attribute, this session will be torn down with an update message error. This issue cannot propagate beyond an affected system as the processing error occurs as soon as the update is received. This issue is exploitable remotely as the respective attribute will propagate through unaffected systems and intermediate AS (if any). Continuous receipt of a BGP update containing this attribute will create a sustained Denial of Service (DoS) condition. Since this issue only affects 22.3R1, Juniper strongly encourages customers to move to 22.3R1-S1. Juniper SIRT felt that the need to promptly warn customers about this issue affecting the 22.3R1 versions of Junos OS and Junos OS Evolved warranted an Out of Cycle JSA. This issue affects: Juniper Networks Junos OS version 22.3R1. Juniper Networks Junos OS Evolved version 22.3R1-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 22.3R1. Juniper Networks Junos OS Evolved versions prior to 22.3R1-EVO.

Improper input validation in OneFlow-Inc. Oneflow v0.9.1 allows attackers to cause a Denial of Service (DoS) via inputting a negative value into the oneflow.full parameter.

GE PACSystems RX3i CPE100/115: All versions prior to R9.85,CPE302/305/310/330/400/410: All versions prior to R9.90,CRU/320 All versions(End of Life) may allow an attacker sending specially manipulated packets to cause the module state to change to halt-mode, resulting in a denial-of-service condition. An operator must reboot the CPU module after removing battery or energy pack to recover from halt-mode.

Improper input validation in OneFlow-Inc. Oneflow v0.9.1 allows attackers to cause a Denial of Service (DoS) via inputting a negative value into the dim parameter.