TOTOLINK N200RE V5 was discovered to contain a command injection vulnerability via the macstr and bandstr parameters in the formMapDelDevice function.

A vulnerability has been found in Sangfor Operation and Maintenance Management System up to 3.0.8. This vulnerability affects the function uploadCN of the file VersionController.java. The manipulation of the argument filename leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

wenxian is a tool to generate BIBTEX files from given identifiers (DOI, PMID, arXiv ID, or paper title). In versions 0.3.1 and prior, a GitHub Actions workflow uses untrusted user input from issue_comment.body directly inside a shell command, allowing potential command injection and arbitrary code execution on the runner. At time of publication, there are no publicly available patches.

A vulnerability was identified in Edimax BR-6208AC 1.02/1.03. Affected is the function formStaDrvSetup of the file /goform/formStaDrvSetup of the component Web-based Configuration Interface. The manipulation of the argument rootAPmac leads to command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. Edimax confirms this issue: "The product mentioned, EDIMAX BR-6208AC V2, has reached its End of Life (EOL) status. It is no longer supported or maintained by Edimax, and it is no longer available for purchase in the market. Consequently, there will be no further firmware updates or patches for this device. We recommend users upgrade to newer models for better security." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this issue is the function websGetVar of the file /goform/set_blacklist. The manipulation of the argument mac/enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

There is a system command injection vulnerability in BiSheng-WNM FW 3.0.0.325. Successful exploitation could allow attackers to gain higher privileges.

A vulnerability was identified in Sangfor Operation and Maintenance Management System up to 3.0.8. The affected element is the function SessionController of the file /isomp-protocol/protocol/session. Such manipulation of the argument Hostname leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability on AX53 v1 occurs in mscd debug functionality due to insufficient input handling, allowing log redirection to arbitrary files and concatenation of unvalidated file content into shell commands, enabling authenticated attackers to inject and execute arbitrary commands. Successful exploitation may allow execution of malicious commands and ultimately full control of the device.

There is a system command injection vulnerability in BiSheng-WNM FW 3.0.0.325. A Huawei printer has a system command injection vulnerability. Successful exploitation could lead to remote code execution.

A Remote Command Injection vulnerability exists in DrayTek Vigor 2960 1.5.1.3, DrayTek Vigor 3900 1.5.1.3, and DrayTek Vigor 300B 1.5.1.3 via a crafted HTTP message containing malformed QUERY STRING in mainfunction.cgi, which could let a remote malicious user execute arbitrary code.

A vulnerability was detected in TRENDnet TEW-713RE 1.02. The impacted element is an unknown function of the file /goformX/formFSrvX. The manipulation of the argument SZCMD results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor confirms: "The product in question TEW-731RE for CVE-2025-15471 has been discontinued and end of life since October 23, 2020. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on the website product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DI-7400G+ 19.12.25A1. This affects an unknown function of the file /msp_info.htm?flag=cmd. The manipulation of the argument cmd results in command injection. The attack can be launched remotely. The exploit has been made public and could be used.

A security flaw has been discovered in Edimax BR-6208AC 1.02/1.03. Affected by this vulnerability is the function formRoute of the file /gogorm/formRoute of the component Web-based Configuration Interface. The manipulation of the argument strIp/strMask/strGateway results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Edimax confirms this issue: "The product mentioned, EDIMAX BR-6208AC V2, has reached its End of Life (EOL) status. It is no longer supported or maintained by Edimax, and it is no longer available for purchase in the market. Consequently, there will be no further firmware updates or patches for this device. We recommend users upgrade to newer models for better security." This vulnerability only affects products that are no longer supported by the maintainer.

An Access Control vulnerability exists in D-Link DIR-823G REVA1 1.02B05 (Lastest) via any parameter in the HNAP1 function

A command injection vulnerability has been identified in Atos Unify OpenScape 4000 Assistant and Unify OpenScape 4000 Manager (8 before R2.22.18, 10 before 0.28.13, and 10 R1 before R1.34.4) that may allow an unauthenticated attacker to upload arbitrary files and achieve administrative access to the system.

Alarm instance management has command injection when there is a specific command configured. It is only for logged-in users. We recommend you upgrade to version 2.0.6 or higher

Nanoleaf Desktop App before v1.3.1 was discovered to contain a command injection vulnerability which is exploited via a crafted HTTP request.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Apache Software Foundation Apache Airflow Hive Provider.This issue affects Apache Airflow Hive Provider: before 5.0.0.

A command injection vulnerability exists in MLflow's model serving container initialization code, specifically in the `_install_model_dependencies_to_env()` function. When deploying a model with `env_manager=LOCAL`, MLflow reads dependency specifications from the model artifact's `python_env.yaml` file and directly interpolates them into a shell command without sanitization. This allows an attacker to supply a malicious model artifact and achieve arbitrary command execution on systems that deploy the model. The vulnerability affects versions 3.8.0 and is fixed in version 3.8.2.

A vulnerability classified as critical was found in hzmanyun Education and Training System 3.1.1. Affected by this vulnerability is the function pdf2swf of the file /pdf2swf. The manipulation of the argument file leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

HP OpenView Network Node Manager 6.2 through 7.50 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) node parameter to connectedNodes.ovpl, (2) cdpView.ovpl, (3) freeIPaddrs.ovpl, and (4) ecscmg.ovpl.

xterm before 375 allows code execution via font ops, e.g., because an OSC 50 response may have Ctrl-g and therefore lead to command execution within the vi line-editing mode of Zsh. NOTE: font ops are not allowed in the xterm default configurations of some Linux distributions.

A vulnerability was identified in Shiguangwu sgwbox N3 2.0.25. This impacts an unknown function of the file /usr/sbin/http_eshell_server of the component NETREBOOT Interface. Such manipulation leads to command injection. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the province parameter at setting/delStaticDhcpRules.

A vulnerability has been found in Teledyne FLIR AX8 up to 1.46.16. Affected by this issue is some unknown functionality of the file palette.php of the component Web Service Handler. The manipulation of the argument palette leads to command injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.49.16 can resolve this issue. Upgrading the affected component is advised. The vendor points out: "FLIR AX8 internal web site has been refactored to be able to handle the reported vulnerabilities."

A vulnerability was detected in Edimax BR-6478AC V3 1.0.15. Impacted is the function sub_416990 of the file /boafrm/formTracerouteDiagnosticRun. The manipulation of the argument host results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability in the version parameter in the function recvSlaveCloudCheckStatus of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

Command Injection vulnerability in D-Link Dir 816 with firmware version DIR-816_A2_v1.10CNB04 allows attackers to run arbitrary commands via the urlAdd parameter.

A security flaw has been discovered in Totolink N300RH 6.1c.1353_B20190305. Affected by this vulnerability is the function setWebWlanIdx of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Performing a manipulation of the argument webWlanIdx results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was detected in D-Link DIR-860LB1 and DIR-868LB1 203b01/203b03. Affected is an unknown function of the component DHCP Daemon. The manipulation of the argument Hostname results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used.

OpenClaw versions prior to 2026.2.24 contain a command injection vulnerability in the system.run shell-wrapper that allows attackers to execute hidden commands by injecting positional argv carriers after inline shell payloads. Attackers can craft misleading approval text while executing arbitrary commands through trailing positional arguments that bypass display context validation.

A command injection vulnerability exists in Jitsi before commit 8aa7be58522f4264078d54752aae5483bfd854b2 when launching browsers on Windows which could allow an attacker to insert an arbitrary URL which opens up the opportunity to remote execution.

IP-COM EW9 V15.11.0.14(9732) was discovered to contain a command injection vulnerability in the formSetDebugCfg function.

A vulnerability was determined in Shiguangwu sgwbox N3 2.0.25. This affects an unknown function of the component SHARESERVER Feature. This manipulation of the argument params causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the checkNet function in /cgi-bin/luci/api/auth.

D-Link DIR-823G v1.0.2 was found to contain a command injection vulnerability in the function SetNetworkTomographySettings. This vulnerability allows attackers to execute arbitrary commands via a crafted packet.

Array Networks AG/vxAG with ArrayOS AG before 9.4.0.469 allows unauthenticated command injection that leads to privilege escalation and control of the system. NOTE: ArrayOS AG 10.x is unaffected.

TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a command injection vulnerability via the hostname parameter in the setOpModeCfg function.

A vulnerability has been found in ADSLR NBR1005GPEV2 250814-r037c. This vulnerability affects the function ap_macfilter_del of the file /send_order.cgi. The manipulation of the argument mac leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in ADSLR NBR1005GPEV2 250814-r037c. This affects the function ap_macfilter_add of the file /send_order.cgi. Executing manipulation of the argument mac can lead to command injection. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability exists in Tenda AC18 V15.03.05.05_multi. The vulnerability is located in the /goform/SetSambaCfg interface, where improper handling of the guestuser parameter allows attackers to execute arbitrary system commands.

A vulnerability was determined in TOTOLINK X5000R 9.1.0cu.2089_B20211224. Affected by this issue is the function snprintf of the file /cgi-bin/cstecgi.cgi?action=exportOvpn&type=user. This manipulation of the argument User causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

A flaw has been found in Edimax BR-6478AC V3 1.0.15. The affected element is the function sub_44CCE4 of the file /boafrm/formSysCmd. This manipulation of the argument sysCmd causes os command injection. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in ADSLR NBR1005GPEV2 250814-r037c. This issue affects the function set_mesh_disconnect of the file /send_order.cgi. The manipulation of the argument mac results in command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Shiguangwu sgwbox N3 2.0.25. Affected is an unknown function of the file /usr/sbin/http_eshell_server of the component DOCKER Feature. Performing manipulation of the argument params results in command injection. The attack may be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in ADSLR B-QE2W401 250814-r037c. Affected by this issue is the function parameterdel_swifimac of the file /send_order.cgi. Performing manipulation of the argument del_swifimac results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in eprintsug ulcc-core. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file cgi/toolbox/toolbox. The manipulation of the argument password leads to command injection. The attack can be launched remotely. The patch is named 811edaae81eb044891594f00062a828f51b22cb1. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-217447.

A security vulnerability has been detected in UTT 进取 750W up to 3.2.2-191225. Affected by this vulnerability is the function system of the file /goform/formPdbUpConfig. Such manipulation of the argument policyNames leads to command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Sangfor Operation and Maintenance Security Management System 3.0. Impacted is an unknown function of the file /fort/portal_login of the component Frontend. This manipulation of the argument loginUrl causes command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 3.0.11 and 3.0.12 is recommended to address this issue. It is advisable to upgrade the affected component.

Improper neutralization of special elements used in a command ('command injection') in Microsoft Bing Images allows an unauthorized attacker to execute code over a network.