A security flaw has been discovered in Edimax BR-6208AC 1.02/1.03. Affected by this vulnerability is the function formRoute of the file /gogorm/formRoute of the component Web-based Configuration Interface. The manipulation of the argument strIp/strMask/strGateway results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Edimax confirms this issue: "The product mentioned, EDIMAX BR-6208AC V2, has reached its End of Life (EOL) status. It is no longer supported or maintained by Edimax, and it is no longer available for purchase in the market. Consequently, there will be no further firmware updates or patches for this device. We recommend users upgrade to newer models for better security." This vulnerability only affects products that are no longer supported by the maintainer.

A flaw has been found in Edimax BR-6478AC V3 1.0.15. The affected element is the function sub_44CCE4 of the file /boafrm/formSysCmd. This manipulation of the argument sysCmd causes os command injection. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Edimax IC-6220DC and IC-5150W up to 3.06. It has been rated as critical. Affected by this issue is the function cgiFormString of the file ipcam_cgi. The manipulation of the argument host leads to command injection. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax BR-6478AC V3 1.0.15. Impacted is the function sub_416990 of the file /boafrm/formTracerouteDiagnosticRun. The manipulation of the argument host results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the formAccept function in /bin/webs without any limitations.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the setWAN function in /bin/webs without any limitations.

EDIMAX BR-6208AC V2_1.02 is vulnerable to Command Injection. This arises because the pppUserName field is directly passed to a shell command via the system() function without proper sanitization. An attacker can exploit this by injecting malicious commands into the pppUserName field, allowing arbitrary code execution.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the mp function in /bin/webs without any limitations.

The web management interface in Edimax AR-6004 ADSL Routers uses a default administrator name and password, which also appear as the default login text for the management interface, which allows remote attackers to gain access.

Edimax IC-7100 does not properly neutralize requests. An attacker can create specially crafted requests to achieve remote code execution on the device

Edimax EW-7438RPn-v3 Mini 1.27 contains a remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary commands through the /goform/mp endpoint. Attackers can exploit the vulnerability by sending crafted POST requests with command injection payloads to download and execute malicious scripts on the device.

A stack-based buffer overflow vulnerability in /bin/webs binary in Edimax BR6478AC V2 firmware veraion v1.23 allows attackers to overwrite other values located on the stack due to an incorrect use of the strcpy() function.

A stack-based buffer-overflow exists in Edimax IP-Camera IC-3116W (v3.06) and IC-3140W (v3.07), which allows an unauthenticated, unauthorized attacker to perform remote-code-execution due to a crafted GET-Request. The overflow occurs in binary ipcam_cgi due to a missing type check in function doGetSysteminfo(). This has been fixed in version: IC-3116W v3.08.

The firmware of EDIMAX IC-3140W Version 3.11 is hardcoded with Administrator username and password.

Edimax BR-6104K router allows remote attackers to bypass access restrictions and conduct unauthorized operations via a UPnP request with a modified InternalClient parameter (possibly within NewInternalClient), which is not validated, as demonstrated by using AddPortMapping to forward arbitrary traffic.

EDIMAX CV7428NS v1.20 was discovered to contain a remote code execution (RCE) vulnerability via the command parameter in the mp function.

Edimax AC1200 Wave 2 Dual-Band Gigabit Router BR-6478AC V3 1.0.15 was discovered to contain a command injection vulnerability via fota_url in /boafrm/formLtefotaUpgradeQuectel

A weakness has been identified in Edimax BR-6428nC up to 1.16. This affects an unknown function of the file /goform/setWAN of the component Web Interface. This manipulation of the argument pppUserName/pptpUserName causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Edimax BR-6208AC 1.02. The impacted element is the function setWAN of the file /goform/setWAN of the component L2TP Mode. The manipulation of the argument L2TPUserName results in command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Edimax BR-6478AC V3 1.0.15. This issue affects the function sub_416898 of the file /boafrm/formDebugDiagnosticRun. The manipulation of the argument host leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Edimax AC1200 Wi-Fi 5 Dual-Band Router BR-6476AC 1.06 suffers from Command Injection issues in /bin/goahead. Specifically, these issues can be triggered through /goform/tracerouteDiagnosis, /goform/pingDiagnosis, and /goform/fromSysToolPingCmd Each of these issues allows an attacker with access to the web interface to inject and execute arbitrary shell commands, with "root" privileges.

EDIMAX BR-6288ACL v1.12 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the pppUserName parameter.

Edimax BR-6473AX v1.0.28 was discovered to contain a remote code execution (RCE) vulnerability via the Object parameter in the openwrt_getConfig function.

Edimax AC1200 Wave 2 Dual-Band Gigabit Router BR-6478AC V3 1.0.15 was discovered to contain a command injection vulnerability via partition in /boafrm/formDiskFormat.

Edimax AC1200 Wave 2 Dual-Band Gigabit Router BR-6478AC V3_1.0.15 was discovered to contain a command injection vulnerability via the groupname at the /boafrm/formDiskCreateGroup.

Edimax AC1200 Wave 2 Dual-Band Gigabit Router BR-6478AC V3_1.0.15 was discovered to contain a command injection vulnerability via the foldername in /boafrm/formDiskCreateShare.

A vulnerability classified as critical has been found in zj1983 zz up to 2024-8. Affected is the function GetDBUser of the file src/main/java/com/futvan/z/system/zorg/ZorgAction.java. The manipulation of the argument user_id leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in code-projects Simple Stock System 1.0. This affects an unknown function of the file /market/login.php. Executing a manipulation of the argument Username can lead to sql injection. The attack can be launched remotely. The exploit has been published and may be used.

A vulnerability was identified in itsourcecode University Management System 1.0. This affects an unknown function of the file /att_single_view.php. Such manipulation of the argument dt leads to sql injection. The attack can be launched remotely. The exploit is publicly available and might be used.

A vulnerability was determined in Tenda WH450 1.0.0.18. This impacts an unknown function of the file /goform/CheckTools of the component HTTP Request Handler. Executing a manipulation of the argument ipaddress can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A cleverly devised username might bypass LDAP authentication checks. In LDAP-authenticated Derby installations, this could let an attacker fill up the disk by creating junk Derby databases. In LDAP-authenticated Derby installations, this could also allow the attacker to execute malware which was visible to and executable by the account which booted the Derby server. In LDAP-protected databases which weren't also protected by SQL GRANT/REVOKE authorization, this vulnerability could also let an attacker view and corrupt sensitive data and run sensitive database functions and procedures. Mitigation: Users should upgrade to Java 21 and Derby 10.17.1.0. Alternatively, users who wish to remain on older Java versions should build their own Derby distribution from one of the release families to which the fix was backported: 10.16, 10.15, and 10.14. Those are the releases which correspond, respectively, with Java LTS versions 17, 11, and 8.

A weakness has been identified in Totolink A7100RU 7.4cu.2313_b20191024. Affected is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument maxRtrAdvInterval causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A command injection vulnerability has been identified in Atos Unify OpenScape 4000 Assistant and Unify OpenScape 4000 Manager (8 before R2.22.18, 10 before 0.28.13, and 10 R1 before R1.34.4) that may allow an unauthenticated attacker to upload arbitrary files and achieve administrative access to the system.

Cacti is an open source platform which provides a robust and extensible operational monitoring and fault management framework for users. In affected versions a command injection vulnerability allows an unauthenticated user to execute arbitrary code on a server running Cacti, if a specific data source was selected for any monitored device. The vulnerability resides in the `remote_agent.php` file. This file can be accessed without authentication. This function retrieves the IP address of the client via `get_client_addr` and resolves this IP address to the corresponding hostname via `gethostbyaddr`. After this, it is verified that an entry within the `poller` table exists, where the hostname corresponds to the resolved hostname. If such an entry was found, the function returns `true` and the client is authorized. This authorization can be bypassed due to the implementation of the `get_client_addr` function. The function is defined in the file `lib/functions.php` and checks serval `$_SERVER` variables to determine the IP address of the client. The variables beginning with `HTTP_` can be arbitrarily set by an attacker. Since there is a default entry in the `poller` table with the hostname of the server running Cacti, an attacker can bypass the authentication e.g. by providing the header `Forwarded-For: <TARGETIP>`. This way the function `get_client_addr` returns the IP address of the server running Cacti. The following call to `gethostbyaddr` will resolve this IP address to the hostname of the server, which will pass the `poller` hostname check because of the default entry. After the authorization of the `remote_agent.php` file is bypassed, an attacker can trigger different actions. One of these actions is called `polldata`. The called function `poll_for_data` retrieves a few request parameters and loads the corresponding `poller_item` entries from the database. If the `action` of a `poller_item` equals `POLLER_ACTION_SCRIPT_PHP`, the function `proc_open` is used to execute a PHP script. The attacker-controlled parameter `$poller_id` is retrieved via the function `get_nfilter_request_var`, which allows arbitrary strings. This variable is later inserted into the string passed to `proc_open`, which leads to a command injection vulnerability. By e.g. providing the `poller_id=;id` the `id` command is executed. In order to reach the vulnerable call, the attacker must provide a `host_id` and `local_data_id`, where the `action` of the corresponding `poller_item` is set to `POLLER_ACTION_SCRIPT_PHP`. Both of these ids (`host_id` and `local_data_id`) can easily be bruteforced. The only requirement is that a `poller_item` with an `POLLER_ACTION_SCRIPT_PHP` action exists. This is very likely on a productive instance because this action is added by some predefined templates like `Device - Uptime` or `Device - Polling Time`. This command injection vulnerability allows an unauthenticated user to execute arbitrary commands if a `poller_item` with the `action` type `POLLER_ACTION_SCRIPT_PHP` (`2`) is configured. The authorization bypass should be prevented by not allowing an attacker to make `get_client_addr` (file `lib/functions.php`) return an arbitrary IP address. This could be done by not honoring the `HTTP_...` `$_SERVER` variables. If these should be kept for compatibility reasons it should at least be prevented to fake the IP address of the server running Cacti. This vulnerability has been addressed in both the 1.2.x and 1.3.x release branches with `1.2.23` being the first release containing the patch.

A vulnerability was found in Benner ModernaNet up to 1.1.0 and classified as critical. Affected by this issue is some unknown functionality of the file /Home/JS_CarregaCombo?formName=DADOS_PESSOAIS_PLANO&additionalCondition=&insideParameters=&elementToReturn=DADOS_PESSOAIS_PLANO&ordenarPelaDescricao=true&direcaoOrdenacao=asc&_=1739290047295. The manipulation leads to sql injection. The attack may be launched remotely. Upgrading to version 1.1.1 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability was identified in code-projects Assessment Management 1.0. This affects an unknown part of the file login.php. Such manipulation of the argument userid leads to sql injection. The attack can be launched remotely. The exploit is publicly available and might be used.

A vulnerability was identified in code-projects Lost and Found Thing Management 1.0. Affected by this issue is some unknown functionality of the file /catageory.php. Such manipulation of the argument cat leads to sql injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used.

A vulnerability was found in DataGear up to 4.60. It has been declared as critical. This vulnerability affects unknown code of the file /dataSet/resolveSql. The manipulation of the argument sql leads to sql injection. The attack can be initiated remotely. Upgrading to version 4.7.0 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability was detected in VetCoders mcp-server-semgrep 1.0.0. This affects the function analyze_results/filter_results/export_results/compare_results/scan_directory/create_rule of the file src/index.ts of the component MCP Interface. The manipulation of the argument ID results in os command injection. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 1.0.1 is able to mitigate this issue. The patch is identified as 141335da044e53c3f5b315e0386e01238405b771. It is advisable to upgrade the affected component.

A vulnerability has been found in itsourcecode Online Cake Ordering System 1.0. The impacted element is an unknown function of the file /updatecustomer.php?action=edit. The manipulation of the argument ID leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR-3040 device with firmware 120B03 was discovered to contain a command injection vulnerability via the SetTriggerLEDBlink function.

A vulnerability has been found in code-projects Online Guitar Store 1.0. This impacts an unknown function of the file /admin/Create_category.php. Such manipulation of the argument dre_Ctitle leads to sql injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was identified in Tiandy Easy7 Integrated Management Platform 7.17.0. Affected by this vulnerability is an unknown functionality of the file /Easy7/rest/systemInfo/updateDbBackupInfo. Such manipulation of the argument week leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in BurtTheCoder mcp-dnstwist up to 1.0.4. Affected by this vulnerability is the function fuzz_domain of the file src/index.ts of the component MCP Interface. Executing a manipulation of the argument Request can lead to os command injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was found in itsourcecode Online Cake Ordering System 1.0. This affects an unknown function of the file /updatesupplier.php?action=edit. The manipulation of the argument ID results in sql injection. The attack may be launched remotely. The exploit has been made public and could be used.

A weakness has been identified in D-Link DIR-806A 100CNb11. Affected is the function ssdpcgi_main of the component SSDP Request Handler. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in Codezips Online Shopping Website 1.0. This vulnerability affects unknown code of the file /success.php. The manipulation of the argument id leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was identified in 9786 phpok3w up to 901d96a06809fb28b17f3a4362c59e70411c933c. Impacted is an unknown function of the file show.php. The manipulation of the argument ID leads to sql injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was found in projectworlds Online Hotel Booking 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /reservation.php. The manipulation of the argument checkin leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.