GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the string port parameter in the enable_echo_server function. This vulnerability allows attackers to execute arbitrary commands via a crafted input.

GL-iNet GL-AR300M16 v4.3.11 was discovered to contain multiple command injection vulnerabilities in the set_upgrade function via the modem_url, target_version, current_version, firmware_upload, hash_type, hash_value, and upgrade_type parameters. These vulnerabilities allow attackers to execute arbitrary commands via a crafted input.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.

Improper Neutralization of Special Elements used in a Command ('Command Injection') in Owl opds 2.2.0.4 allows Command Injection via a crafted network request.

GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the set_config function. This vulnerability allows attackers to execute arbitrary commands via a crafted input.

DocsGPT is a GPT-powered chat for documentation. From version 0.15.0 to before version 0.16.0, an attacker accessing both the official DocsGPT website or any local and public deployment, can craft a malicious payload bypassing the "MCP test" behavior to achieve arbitrary remote code execution (RCE). This issue has been patched in version 0.16.0.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.

GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the module parameter in the M.get_system_log function. This vulnerability allows attackers to execute arbitrary commands via a crafted input.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pbc_wps function.

A security flaw has been discovered in Wavlink WL-WN579A3 up to 20210219. Affected by this issue is the function DeleteMac of the file /cgi-bin/wireless.cgi. The manipulation of the argument delete_list results in command injection. The attack can be executed remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Ruijie Networks RG-EW1200 Wireless Routers EW_3.0(1)B11P204 was discovered to contain a command injetion vulnerability via the params.path parameter in the upgradeConfirm function.

A vulnerability was determined in Wavlink WL-WN579A3 up to 20210219. Affected is an unknown function of the file /cgi-bin/login.cgi. Executing a manipulation of the argument key can lead to command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Wavlink WL-WN579A3 up to 20210219. Affected by this vulnerability is the function Delete_Mac_list of the file /cgi-bin/wireless.cgi. The manipulation of the argument delete_list leads to command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

The affected product is vulnerable to two instances of command injection, which may allow an attacker to remotely execute arbitrary code.

Versions of the package nemo-appium before 0.0.9 are vulnerable to Command Injection due to improper input sanitization in the 'module.exports.setup' function. **Note:** In order to exploit this vulnerability appium-running 0.1.3 has to be installed as one of nemo-appium dependencies.

All versions of iSTAR Ultra prior to version 6.8.9.CU01 are vulnerable to a command injection that could allow an unauthenticated user root access to the system.

Orval generates type-safe JS clients (TypeScript) from any valid OpenAPI v3 or Swagger v2 specification. Versions 7.19.0 and below and 8.0.0-rc.0 through 8.0.2 allow untrusted OpenAPI specifications to inject arbitrary TypeScript/JavaScript into generated mock files via the const keyword on schema properties. These const values are interpolated into the mock scalar generator (getMockScalar in packages/mock/src/faker/getters/scalar.ts) without proper escaping or type-safe serialization, which results in attacker-controlled code being emitted into both interface definitions and faker/MSW handlers. The vulnerability is similar in impact to the previously reported enum x-enumDescriptions (GHSA-h526-wf6g-67jv), but it affects a different code path in the faker-based mock generator rather than @orval/core. The issue has been fixed in versions 7.20.0 and 8.0.3.

Orval generates type-safe JS clients (TypeScript) from any valid OpenAPI v3 or Swagger v2 specification. Versions prior to 7.19.0 until 8.0.2 are vulnerable to arbitrary code execution in environments consuming generated clients. This issue is similar in nature to CVE-2026-22785, but affects a different code path in @orval/core that was not addressed by CVE-2026-22785's fix. The vulnerability allows untrusted OpenAPI specifications to inject arbitrary TypeScript/JavaScript code into generated clients via the x-enumDescriptions field, which is embedded without proper escaping in getEnumImplementation(). I have confirmed that the injection occurs during const enum generation and results in executable code within the generated schema files. Orval 7.19.0 and 8.0.2 contain a fix for the issue.

Code Injection vulnerability in EasyVirt DCScope <= 8.6.0 and CO2Scope <= 1.3.0 allows remote unauthenticated attackers to execute arbitrary code to /api/license/sendlicense/.

A command injection vulnerability exists in the gena.cgi module of D-Link DAP-1650 devices. An unauthenticated attacker can exploit this vulnerability to gain command execution on the device as root.

A security vulnerability exists in Zingbox Inspector version 1.293 and earlier, that allows for remote code execution if the Inspector were sent a malicious command from the Zingbox cloud, or if the Zingbox Inspector were tampered with to connect to an attacker's cloud endpoint.

Command Injection in Nagios Fusion 4.1.8 and earlier allows for Privilege Escalation or Code Execution as root via vectors related to corrupt component installation in cmd_subsys.php.

SNMP objects in NET-SNMP used in ORing IAP-420 allows Command Injection. This issue affects IAP-420: through 2.01e.

A command injection vulnerability in the wsConvertPpt component of Chamilo v1.11.* up to v1.11.18 allows attackers to execute arbitrary commands via a SOAP API call with a crafted PowerPoint name.

The kill-port-process package version < 2.2.0 is vulnerable to a Command Injection vulnerability.

Deno is a JavaScript, TypeScript, and WebAssembly runtime. Before 2.5.6, a prior patch aimed to block spawning Windows batch/shell files by returning an error when a spawned path’s extension matched .bat or .cmd. That check performs a case-sensitive comparison against lowercase literals and therefore can be bypassed when the extension uses alternate casing (for example .BAT, .Bat, etc.). This vulnerability is fixed in 2.5.6.

Improper Neutralization of Special Elements used in a Command ('Command Injection') in Owl opds 2.2.0.4 allows Command Injection via a crafted network request.

orval generates type-safe JS clients (TypeScript) from any valid OpenAPI v3 or Swagger v2 specification. Prior to 7.18.0, the MCP server generation logic relies on string manipulation that incorporates the summary field from the OpenAPI specification without proper validation or escaping. This allows an attacker to "break out" of the string literal and inject arbitrary code. This vulnerability is fixed in 7.18.0.

Cursor is a code editor built for programming with AI. Prior to 2.3, hen the Cursor Agent is running in Auto-Run Mode with Allowlist mode enabled, certain shell built-ins can still be executed without appearing in the allowlist and without requiring user approval. This allows an attacker via indirect or direct prompt injection to poison the shell environment by setting, modifying, or removing environment variables that influence trusted commands. This vulnerability is fixed in 2.3.

In Cleo Harmony before 5.8.0.24, VLTrader before 5.8.0.24, and LexiCom before 5.8.0.24, an unauthenticated user can import and execute arbitrary Bash or PowerShell commands on the host system by leveraging the default settings of the Autorun directory.

This affects all versions of package sonar-wrapper. The injection point is located in lib/sonarRunner.js.

Remote command injection vulnerability in heap profiler builtin service in Apache bRPC ((all versions < 1.15.0)) on all platforms allows attacker to inject remote command. Root Cause: The bRPC heap profiler built-in service (/pprof/heap) does not validate the user-provided extra_options parameter and executes it as a command-line argument. Attackers can execute remote commands using the extra_options parameter.. Affected scenarios: Use the built-in bRPC heap profiler service to perform jemalloc memory profiling. How to Fix: we provide two methods, you can choose one of them: 1. Upgrade bRPC to version 1.15.0. 2. Apply this patch ( https://github.com/apache/brpc/pull/3101 ) manually.

This affects all versions of package deferred-exec. The injection point is located in line 42 in lib/deferred-exec.js

Input passed to the Pdf() function is shell escaped and passed to child_process.exec() during PDF rendering. However, the shell escape does not properly encode all special characters, namely, semicolon and curly braces. This can be abused to achieve command execution. This problem affects nodepdf 1.3.0.

A vulnerability, which was classified as critical, has been found in anji-plus AJ-Report up to 1.4.1. This issue affects the function IGroovyHandler. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-266267.

The package ntesseract before 0.2.9 are vulnerable to Command Injection via lib/tesseract.js.

A vulnerability was detected in Great Developers Certificate Generation System up to 97171bb0e5e22e52eacf4e4fa81773e5f3cffb73. This vulnerability affects unknown code of the file /restructured/csv.php. The manipulation of the argument photo results in os command injection. The attack can be executed remotely. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The code repository of the project has not been active for many years.

Symphony process is a module for the Symphony PHP framework which executes commands in sub-processes. On Windows, when an executable file named `cmd.exe` is located in the current working directory it will be called by the `Process` class when preparing command arguments, leading to possible hijacking. This issue has been addressed in release versions 5.4.46, 6.4.14, and 7.1.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

DCME-320 v7.4.12.90 was discovered to contain a command injection vulnerability.

A vulnerability was determined in BurtTheCoder mcp-maigret up to 1.0.12. This affects an unknown part of the file src/index.ts of the component search_username. Executing a manipulation of the argument Username can lead to command injection. The attack may be launched remotely. Upgrading to version 1.0.13 is able to mitigate this issue. This patch is called b1ae073c4b3e789ab8de36dc6ca8111ae9399e7a. Upgrading the affected component is advised.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the ruequest_certificate function.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the setup_cacertificate function.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the acme_process function.

An OS command injection vulnerability has been reported to affect HBS 3 Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to execute commands. We have already fixed the vulnerability in the following version: HBS 3 Hybrid Backup Sync 25.1.1.673 and later

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain a command injection via the setWanCfg function.

In Cassia Gateway firmware XC1000_2.1.1.2303082218 and XC2000_2.1.1.2303090947, the queueUrl parameter in /bypass/config is not sanitized. This leads to injecting Bash code and executing it with root privileges on device startup.

A vulnerability was detected in Totolink A7000R 4.1cu.4154. This affects the function setUnloadUserData of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument plugin_name results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

EnerSys AMPA versions 24.04 through 24.16, inclusive, are vulnerable to command injection leading to privileged remote shell access.

On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, and v5.4.5 for AirSync firmware. For example, Nanostation5 (Air OS) is affected.