A buffer overflow occurs in utilities/ymodem/ry_sy.c in RT-Thread through 5.0.2 because of an incorrect sprintf call or a missing '\0' character.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects EX6000 before 1.0.0.38, EX6120 before 1.0.0.48, EX6130 before 1.0.0.30, R6300v2 before 1.0.4.52, R6400 before 1.0.1.52, R7000 before 1.0.11.126, R7900 before 1.0.4.30, R8000 before 1.0.4.52, R7000P before 1.3.2.124, R8000P before 1.4.1.50, RAX80 before 1.0.3.88, R6900P before 1.3.2.124, R7900P before 1.4.1.50, and RAX75 before 1.0.3.88.

TOTOLINK A810R V4.1.2cu.5182_B20201026 is vulnerable to Buffer Overflow in infostat.cgi.

An exploitable format string vulnerability exists in the iw_console conio_writestr functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted time server entry can cause an overflow of the time server buffer, resulting in remote code execution. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects R7000 before 1.0.11.126, R7960P before 1.4.2.84, R8000 before 1.0.4.74, RAX200 before 1.0.4.120, R8000P before 1.4.2.84, RAX20 before 1.0.2.82, RAX45 before 1.0.2.82, RAX80 before 1.0.4.120, R7900P before 1.4.2.84, RAX15 before 1.0.2.82, RAX50 before 1.0.2.82, and RAX75 before 1.0.4.120.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects EX7000 before 1.0.1.80, R6400 before 1.0.1.50, R6400v2 before 1.0.4.118, R6700 before 1.0.2.8, R6700v3 before 1.0.4.118, R6900 before 1.0.2.8, R6900P before 1.3.2.124, R7000 before 1.0.9.88, R7000P before 1.3.2.124, R7900 before 1.0.3.18, R7900P before 1.4.1.50, R8000 before 1.0.4.46, R8000P before 1.4.1.50, RAX80 before 1.0.1.56, and WNR3500Lv2 before 1.2.0.62.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted commands sent through the PubNub service can cause a stack-based buffer overflow overwriting arbitrary data. An attacker should send an authenticated HTTP request to trigger this vulnerability. At 0x9d01ef24 the value for the s_offset key is copied using strcpy to the buffer at $sp+0x2b0. This buffer is 32 bytes large, sending anything longer will cause a buffer overflow.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable remote code execution vulnerability exists in the iw_webs configuration parsing functionality. A specially crafted user name entry can cause an overflow of an error message buffer, resulting in remote code execution. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.8.2823 build 20240712 and later QuTS hero h5.1.8.2823 build 20240712 and later

RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. Most codebases define assertion macros which compile to a no-op on non-debug builds. If assertions are the only line of defense against untrusted input, the software may be exposed to attacks that leverage the lack of proper input checks. In detail, in the `nimble_scanlist_update()` function below, `len` is checked in an assertion and subsequently used in a call to `memcpy()`. If an attacker is able to provide a larger `len` value while assertions are compiled-out, they can write past the end of the fixed-length `e->ad` buffer. If the unchecked input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerability could range from denial of service to arbitrary code execution. This issue has not yet been patched. Users are advised to add manual `len` checking.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute code via a network. We have already fixed the vulnerability in the following version: QTS 5.1.7.2770 build 20240520 and later QuTS hero h5.1.7.2770 build 20240520 and later

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute code via a network. We have already fixed the vulnerability in the following version: QTS 5.1.7.2770 build 20240520 and later QuTS hero h5.1.7.2770 build 20240520 and later

Heap-based buffer overflow in the Local Security Authority Subsystem Service (LSASS), as used in Active Directory in Microsoft Windows Server 2003 SP2 and Windows Server 2008 Gold, SP2, and R2; Active Directory Application Mode (ADAM) in Windows XP SP2 and SP3 and Windows Server 2003 SP2; and Active Directory Lightweight Directory Service (AD LDS) in Windows Vista SP2, Windows Server 2008 Gold, SP2, and R2, and Windows 7, allows remote authenticated users to execute arbitrary code via malformed LDAP messages, aka "LSASS Heap Overflow Vulnerability."

Directory Traversal vulnerability in Mgt-commerce CloudPanel v.2.0.0 thru v.2.4.0 allows a remote attacker to obtain sensitive information and execute arbitrary code via the service parameter of the load-logfiles function.

A buffer overflow vulnerability exists in Windows File Resource Profiles in 9.X allows a remote authenticated user with privileges to browse SMB shares to execute arbitrary code as the root user. As of version 9.1R3, this permission is not enabled by default.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been declared as critical. This vulnerability affects the function formSetPortTr of the file /goform/formSetPortTr. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been classified as critical. This affects the function formResetStatistic of the file /goform/formResetStatistic. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A buffer overflow issue was discovered in ZOOK solution(remote administration tool) through processing 'ConnectMe' command while parsing a crafted OUTERIP value because of missing boundary check. This vulnerability allows the attacker to execute remote arbitrary command.

A vulnerability in agent program of HelpU remote control solution could allow an authenticated remote attacker to execute arbitrary commands This vulnerability is due to insufficient input santization when communicating customer process.

A CWE-120: Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability exists in the Web Server on Modicon M340, Modicon Quantum and Modicon Premium Legacy offers and their Communication Modules (see notification for details) which could cause write access and the execution of commands when uploading a specially crafted file on the controller over FTP.

In uftpd before 2.11, there is a buffer overflow vulnerability in handle_PORT in ftpcmd.c that is caused by a buffer that is 16 bytes large being filled via sprintf() with user input based on the format specifier string %d.%d.%d.%d. The 16 byte size is correct for valid IPv4 addresses (len('255.255.255.255') == 16), but the format specifier %d allows more than 3 digits. This has been fixed in version 2.11

A vulnerability was found in Shenzhen Libituo Technology LBT-T300-T310 2.2.3.6. It has been rated as critical. Affected by this issue is the function sub_40B6F0 of the file at/appy.cgi. The manipulation of the argument wan_proto leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A buffer overflow vulnerability in BMC Control-M/Agent 7.0.00.000 when the On-Do action destination is Mail and the Control-M/Agent is configured to send the email, allows remote attackers to have unspecified impact via vectors related to the configured IP address or SMTP server.

Western Digital My Cloud EX2 Ultra firmware 2.31.195 allows a Buffer Overflow with Extended Instruction Pointer (EIP) control via crafted GET/POST parameters.

freeFTPd 1.0.8 has a Post-Authentication Buffer Overflow via a crafted SIZE command (this is exploitable even if logging is disabled).

A vulnerability was found in Tenda FH1206 1.2.0.8(8155) and classified as critical. This issue affects the function fromAddressNat of the file /goform/addressNat. The manipulation of the argument entrys leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261671. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Netgear JWNR2000v2 v1.0.0.11, XWN5001 v0.4.1.1, and XAVN2001v2 v0.4.0.7 were discovered to contain multiple buffer overflows via the http_passwd and http_username parameters in the check_auth function.

A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later

Netgear JWNR2000v2 v1.0.0.11, XWN5001 v0.4.1.1, and XAVN2001v2 v0.4.0.7 were discovered to contain multiple buffer overflows via the http_passwd and http_username parameters in the update_auth function.

A vulnerability was found in TOTOLINK A702R 4.0.0-B20230721.1521 and classified as critical. Affected by this issue is some unknown functionality of the file /boafrm/formOneKeyAccessButton of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Netgear DC112A 1.0.0.64, EX6200 1.0.3.94 and R6300v2 1.0.4.8 were discovered to contain a buffer overflow via the http_passwd parameter in password.cgi.

Netgear R6900P v1.3.3.154 was discovered to contain multiple buffer overflows via the wla_ssid and wlg_ssid parameters at ia_ap_setting.cgi.

A vulnerability has been found in Tenda CH22 1.0.0.1. Affected by this issue is the function formeditFileName of the file /goform/editFileName. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in TOTOLINK A702R up to 4.0.0-B20230721.1521. Affected by this vulnerability is an unknown functionality of the file /boafrm/formWlSiteSurvey of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /boafrm/formMultiAPVLAN of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in D-Link DIR-619L B1 2.06. Affected is the function formSetMACFilter of the file /goform/formSetMACFilter. The manipulation of the argument curTime leads to buffer overflow. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in TOTOLINK A702R 4.0.0-B20230721.1521 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /boafrm/formIpQoS of the component HTTP POST Request Handler. The manipulation of the argument mac leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was determined in Tenda AC20 up to 16.03.08.12. Affected is an unknown function of the file /goform/WifiGuestSet. The manipulation of the argument shareSpeed leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Netgear XR300 v1.0.3.78 was discovered to contain multiple buffer overflows via the wla_ssid and wlg_ssid parameters at genie_ap_wifi_change.cgi.

A flaw has been found in Tenda CH22 1.0.0.1. This vulnerability affects the function formeditUserName of the file /goform/editUserName. Executing manipulation of the argument new_account can lead to buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used.

A vulnerability, which was classified as critical, was found in TOTOLINK T6 4.1.5cu.748_B20211015. Affected is the function updateWifiInfo of the component MQTT Service. The manipulation of the argument serverIp leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in Tenda AC6 15.03.06.50 and classified as critical. Affected by this vulnerability is the function setparentcontrolinfo of the component httpd. The manipulation leads to buffer overflow. The attack can be launched remotely.

A vulnerability was found in TOTOLINK A702R 4.0.0-B20230721.1521. It has been classified as critical. This affects an unknown part of the file /boafrm/formPortFw of the component HTTP POST Request Handler. The manipulation of the argument service_type leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

AMI BMC contains a vulnerability in the IPMI handler, where an attacker with the required privileges can cause a buffer overflow, which may lead to code execution, denial of service, or escalation of privileges.  

A vulnerability, which was classified as critical, has been found in Tenda CH22 1.0.0.1. Affected by this issue is the function formdeleteUserName of the file /goform/deleteUserName. The manipulation of the argument old_account leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in TOTOLINK X15 1.0.0-B20230714.1105 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formFilter of the component HTTP POST Request Handler. The manipulation of the argument ip6addr/url/vpnPassword/vpnUser leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was identified in Tenda CH22 1.0.0.1. Affected by this vulnerability is the function formdelFileName of the file /goform/delFileName. The manipulation leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.