A vulnerability, which was classified as critical, was found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. Affected is an unknown function of the component Static Routing Configuration Handler. The manipulation of the argument next-hop-interface leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. VDB-223302 is the identifier assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in DrayTek Vigor 2960 1.5.1.4/1.5.1.5. Affected is an unknown function of the file mainfunction.cgi of the component Web Management Interface. The manipulation of the argument password leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-222258 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
NetModule NSRW web administration interface executes an OS command constructed with unsanitized user input. A successful exploit could allow an authenticated user to execute arbitrary commands with elevated privileges. This issue affects NSRW: from 4.3.0.0 before 4.3.0.119, from 4.4.0.0 before 4.4.0.118, from 4.6.0.0 before 4.6.0.105, from 4.7.0.0 before 4.7.0.103.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.
A vulnerability has been found in TRENDnet TEW-811DRU 1.0.10.0 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-220018 is the identifier assigned to this vulnerability.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.
A vulnerability in the web management interface of the Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient validation of user-supplied parameters for certain API endpoints. An attacker could exploit this vulnerability by sending crafted input to an affected API endpoint. A successful exploit could allow an attacker to execute arbitrary commands on the device with low system privileges. To successfully exploit this vulnerability, an attacker would need valid credentials for a user with Device permissions: by default, only Administrators, Security Approvers and Network Admins user accounts have these permissions.
A vulnerability was found in TRENDnet TEW-652BRP 3.04b01. It has been classified as critical. Affected is an unknown function of the file ping.ccp of the component Web Interface. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-220020.
A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. To exploit this vulnerability, an attacker must have valid Administrator privileges on the affected device.
There is command injection when ddns processes the hostname, which causes the administrator user to obtain the root privilege of the router. This affects Xiaomi router AX1800rom version < 1.0.336 and Xiaomi route RM1800 root version < 1.0.26.
There is command injection in the meshd program in the routing system, resulting in command execution under administrator authority on Xiaomi router AX3600 with ROM version =< 1.1.12
The lack of nested page table protection in the AMD SEV/SEV-ES feature could potentially lead to arbitrary code execution within the guest VM if a malicious administrator has access to compromise the server hypervisor.
A post-auth command injection vulnerability in the exception wizard of Sophos Web Appliance older than version 4.3.10.4 allows administrators to execute arbitrary code.
Command injection vulnerability in nw_interface.html in SHARP multifunction printers (MFPs)'s Digital Full-color Multifunctional System 202 or earlier, 120 or earlier, 600 or earlier, 121 or earlier, 500 or earlier, 402 or earlier, 790 or earlier, and Digital Multifunctional System (Monochrome) 200 or earlier, 211 or earlier, 102 or earlier, 453 or earlier, 400 or earlier, 202 or earlier, 602 or earlier, 500 or earlier, 401 or earlier allows remote attackers to execute arbitrary commands via unspecified vectors.
The webserver in Delta DX-3021 versions prior to 1.24 is vulnerable to command injection through the network diagnosis page. This vulnerability could allow a remote unauthenticated user to add files, delete files, and change file permissions.
A vulnerability was found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028 and classified as critical. This issue affects the function ping_ddns of the file internet.cgi. The manipulation of the argument DDNS leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Zoho ManageEngine ADManager Plus through 7151 allows authenticated admin users to execute the commands in proxy settings.
A vulnerability was found in TRENDnet TEW-815DAP 1.0.2.0. It has been classified as critical. This affects the function do_setNTP of the component POST Request Handler. The manipulation of the argument NtpDstStart/NtpDstEnd leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252123. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
AP Manager in Innovaphone before 13r2 Service Release 17 allows command injection via a modified service ID during app upload.
In versions 16.1.x before 16.1.3.1, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5.1, and 13.1.x before 13.1.5.1, When the Advanced WAF / ASM module is provisioned, an authenticated remote code execution vulnerability exists in the BIG-IP iControl REST interface.
The web interface of the Vertiv Avocent UMG-4000 version 4.2.1.19 is vulnerable to command injection because the application incorrectly neutralizes code syntax before executing. Since all commands within the web application are executed as root, this could allow a remote attacker authenticated with an administrator account to execute arbitrary commands as root.
Zoho ManageEngine ServiceDesk Plus versions 13010 and prior are vulnerable to authenticated command injection. This can be exploited by high-privileged users.
In streampark, there is a project module that integrates Maven's compilation capability. However, there is no check on the compilation parameters of Maven. allowing attackers to insert commands for remote command execution, The prerequisite for a successful attack is that the user needs to log in to the streampark system and have system-level permissions. Generally, only users of that system have the authorization to log in, and users would not manually input a dangerous operation command. Therefore, the risk level of this vulnerability is very low. Mitigation: all users should upgrade to 2.1.2 Example: ##You can customize the splicing method according to the compilation situation of the project, mvn compilation results use &&, compilation failure use "||" or "&&": /usr/share/java/maven-3/conf/settings.xml || rm -rf /* /usr/share/java/maven-3/conf/settings.xml && nohup nc x.x.x.x 8899 &
An Improper Neutralization of Special Elements used in a command vulnerability in ESM prior to version 11.6.9 allows a remote administrator to execute arbitrary code as root on the ESM. This is possible as the input isn't correctly sanitized when adding a new data source.
A command injection vulnerability exists in the IOCTL that manages OTA updates. A specially crafted command can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability.
A command injection vulnerability could allow an authenticated user to execute operating system commands as root via a specially crafted API request.
MyBB is a free and open source forum software. The _Mail Settings_ → Additional Parameters for PHP's mail() function mail_parameters setting value, in connection with the configured mail program's options and behavior, may allow access to sensitive information and Remote Code Execution (RCE). The vulnerable module requires Admin CP access with the `_Can manage settings?_` permission and may depend on configured file permissions. MyBB 1.8.31 resolves this issue with the commit `0cd318136a`. Users are advised to upgrade. There are no known workarounds for this vulnerability.
A vulnerability has been found in AMTT Hotel Broadband Operation System 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /manager/system/nlog_down.php. The manipulation of the argument ProtocolType leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.
A remote command injection issues exists in the web server of the Kratos SpectralNet device with SpectralNet Narrowband (NB) before 1.7.5. As an admin user, an attacker can send a crafted password in order to execute Linux commands as the root user.
SolarWinds Platform was susceptible to Command Injection. This vulnerability allows a remote adversary with complete control over the SolarWinds database to execute arbitrary commands.
IBM Cloud Pak for Data 4.5 and 4.6 could allow a privileged user to upload malicious files of dangerous types that can be automatically processed within the product's environment. IBM X-Force ID: 232034.
An issue was discovered in Infoblox NETMRI before 7.6.1. Remote Unauthenticated Command Injection can occur.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.58, R7500v2 before 1.0.3.48, R7800 before 1.0.2.68, R8900 before 1.0.5.2, R9000 before 1.0.5.2, RAX120 before 1.0.1.108, and XR700 before 1.0.1.20.
An authenticated command injection vulnerability exists in the Command line interface of HPE Networking Instant On Access Points. A successful exploitation could allow a remote attacker with elevated privileges to execute arbitrary commands on the underlying operating system as a highly privileged user.
An issue was discovered in Peplink Balance Two before 8.4.0. Command injection in the traceroute feature of the administration console allows users with admin privileges to execute arbitrary commands as root.
The Untangle NG firewall 14.2.0 is vulnerable to an authenticated command injection when logged in as an admin user.
OpenMage LTS is an e-commerce platform. Prior to versions 19.4.22 and 20.0.19, an administrator with the permissions to upload files via DataFlow and to create products was able to execute arbitrary code via the convert profile. Versions 19.4.22 and 20.0.19 contain a patch for this issue.
setup.cgi on NETGEAR R6020 1.0.0.48 devices allows an admin to execute arbitrary shell commands via shell metacharacters in the ntp_server field.
Command Injection in EdgeMAX EdgeSwitch prior to 1.8.2 allow an Admin user to execute commands as root.
D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 was discovered to contain a command injection vulnerability via the backup function.
Jellyfin is a system for managing and streaming media. Prior to version 10.8.13, the `/System/MediaEncoder/Path` endpoint executes an arbitrary file using `ProcessStartInfo` via the `ValidateVersion` function. A malicious administrator can setup a network share and supply a UNC path to `/System/MediaEncoder/Path` which points to an executable on the network share, causing Jellyfin server to run the executable in the local context. The endpoint was removed in version 10.8.13.
D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 was discovered to contain a command injection vulnerability via the ping6 function.
Microsoft Defender for IoT Remote Code Execution Vulnerability
A vulnerability, which was classified as critical, has been found in D-Link DIR-823X 240126/240802. This issue affects the function sub_41710C of the file /goform/diag_nslookup of the component HTTP POST Request Handler. The manipulation of the argument target_addr leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400v2 before 1.0.4.84, R6700 before 1.0.2.8, R6700v3 before 1.0.4.84, R6900 before 1.0.2.8, and R7900 before 1.0.3.10.
The Newsletters WordPress plugin before 4.9.3 does not properly escape user-controlled parameters when they are appended to SQL queries and shell commands, which could enable an administrator to run arbitrary commands on the server.
D-Link DIR-853 A1 FW1.20B07 was discovered to contain a command injection vulnerability in the SetVirtualServerSettings module.
A vulnerability, which was classified as critical, has been found in Tenda AC8, AC10 and AC18 16.03.10.20. Affected by this issue is some unknown functionality of the file /goform/telnet of the component HTTP Request Handler. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability in the web-based management interface of Cisco Webex Video Mesh could allow an authenticated, remote attacker to execute arbitrary commands on the affected system. The vulnerability is due to improper validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by logging in to the web-based management interface with administrative privileges and supplying crafted requests to the application. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges on a targeted node.
A vulnerability has been found in Ruijie RG-UAC 1.0 and classified as critical. This vulnerability affects the function get_ip.addr_details of the file /view/vpn/autovpn/sxh_vpnlic.php of the component HTTP POST Request Handler. The manipulation of the argument indevice leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-269482 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.