There are use-after-free vulnerabilities caused by timer handler in net/rose/rose_timer.c of linux that allow attackers to crash linux kernel without any privileges.

In the Linux kernel, the following vulnerability has been resolved: tipc: skb_linearize the head skb when reassembling msgs It's not a good idea to append the frag skb to a skb's frag_list if the frag_list already has skbs from elsewhere, such as this skb was created by pskb_copy() where the frag_list was cloned (all the skbs in it were skb_get'ed) and shared by multiple skbs. However, the new appended frag skb should have been only seen by the current skb. Otherwise, it will cause use after free crashes as this appended frag skb are seen by multiple skbs but it only got skb_get called once. The same thing happens with a skb updated by pskb_may_pull() with a skb_cloned skb. Li Shuang has reported quite a few crashes caused by this when doing testing over macvlan devices: [] kernel BUG at net/core/skbuff.c:1970! [] Call Trace: [] skb_clone+0x4d/0xb0 [] macvlan_broadcast+0xd8/0x160 [macvlan] [] macvlan_process_broadcast+0x148/0x150 [macvlan] [] process_one_work+0x1a7/0x360 [] worker_thread+0x30/0x390 [] kernel BUG at mm/usercopy.c:102! [] Call Trace: [] __check_heap_object+0xd3/0x100 [] __check_object_size+0xff/0x16b [] simple_copy_to_iter+0x1c/0x30 [] __skb_datagram_iter+0x7d/0x310 [] __skb_datagram_iter+0x2a5/0x310 [] skb_copy_datagram_iter+0x3b/0x90 [] tipc_recvmsg+0x14a/0x3a0 [tipc] [] ____sys_recvmsg+0x91/0x150 [] ___sys_recvmsg+0x7b/0xc0 [] kernel BUG at mm/slub.c:305! [] Call Trace: [] <IRQ> [] kmem_cache_free+0x3ff/0x400 [] __netif_receive_skb_core+0x12c/0xc40 [] ? kmem_cache_alloc+0x12e/0x270 [] netif_receive_skb_internal+0x3d/0xb0 [] ? get_rx_page_info+0x8e/0xa0 [be2net] [] be_poll+0x6ef/0xd00 [be2net] [] ? irq_exit+0x4f/0x100 [] net_rx_action+0x149/0x3b0 ... This patch is to fix it by linearizing the head skb if it has frag_list set in tipc_buf_append(). Note that we choose to do this before calling skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can not just drop the frag_list either as the early time.

A NULL pointer dereference flaw was found in the Linux kernel’s X.25 set of standardized network protocols functionality in the way a user terminates their session using a simulated Ethernet card and continued usage of this connection. This flaw allows a local user to crash the system.

A use-after-free vulnerabilitity was discovered in drivers/net/hamradio/6pack.c of linux that allows an attacker to crash linux kernel by simulating ax25 device using 6pack driver from user space.

A use-after-free flaw was found in fs/ext4/namei.c:dx_insert_block() in the Linux kernel’s filesystem sub-component. This flaw allows a local attacker with a user privilege to cause a denial of service.

A use-after-free vulnerability was found in the Linux kernel in drivers/net/hamradio. This flaw allows a local attacker with a user privilege to cause a denial of service (DOS) when the mkiss or sixpack device is detached and reclaim resources early.

A use-after-free flaw was found in the Linux kernel’s Amateur Radio AX.25 protocol functionality in the way a user connects with the protocol. This flaw allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel The following race is possible between bpf_timer_cancel_and_free and bpf_timer_cancel. It will lead a UAF on the timer->timer. bpf_timer_cancel(); spin_lock(); t = timer->time; spin_unlock(); bpf_timer_cancel_and_free(); spin_lock(); t = timer->timer; timer->timer = NULL; spin_unlock(); hrtimer_cancel(&t->timer); kfree(t); /* UAF on t */ hrtimer_cancel(&t->timer); In bpf_timer_cancel_and_free, this patch frees the timer->timer after a rcu grace period. This requires a rcu_head addition to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init, this does not need a kfree_rcu because it is still under the spin_lock and timer->timer has not been visible by others yet. In bpf_timer_cancel, rcu_read_lock() is added because this helper can be used in a non rcu critical section context (e.g. from a sleepable bpf prog). Other timer->timer usages in helpers.c have been audited, bpf_timer_cancel() is the only place where timer->timer is used outside of the spin_lock. Another solution considered is to mark a t->flag in bpf_timer_cancel and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free, it busy waits for the flag to be cleared before kfree(t). This patch goes with a straight forward solution and frees timer->timer after a rcu grace period.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix missing cleanup on rollforward recovery error In an error injection test of a routine for mount-time recovery, KASAN found a use-after-free bug. It turned out that if data recovery was performed using partial logs created by dsync writes, but an error occurred before starting the log writer to create a recovered checkpoint, the inodes whose data had been recovered were left in the ns_dirty_files list of the nilfs object and were not freed. Fix this issue by cleaning up inodes that have read the recovery data if the recovery routine fails midway before the log writer starts.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear. ffs_data_clear is indirectly called from both ffs_fs_kill_sb and ffs_ep0_release, so it ends up being called twice when userland closes ep0 and then unmounts f_fs. If userland provided an eventfd along with function's USB descriptors, it ends up calling eventfd_ctx_put as many times, causing a refcount underflow. NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls. Also, set epfiles to NULL right after de-allocating it, for readability. For completeness, ffs_data_clear actually ends up being called thrice, the last call being before the whole ffs structure gets freed, so when this specific sequence happens there is a second underflow happening (but not being reported): /sys/kernel/debug/tracing# modprobe usb_f_fs /sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter /sys/kernel/debug/tracing# echo function > current_tracer /sys/kernel/debug/tracing# echo 1 > tracing_on (setup gadget, run and kill function userland process, teardown gadget) /sys/kernel/debug/tracing# echo 0 > tracing_on /sys/kernel/debug/tracing# cat trace smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put Warning output corresponding to above trace: [ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c [ 1946.293094] refcount_t: underflow; use-after-free. [ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E) [ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1 [ 1946.417950] Hardware name: BCM2835 [ 1946.425442] Backtrace: [ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24) [ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c [ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30) [ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154) [ 1946.482067] r5:c04a948c r4:c0a71dc8 [ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4) [ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04 [ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c) [ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0 [ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74) [ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs]) [ 1946.582664] r5:c3b84c00 r4:c2695b00 [ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs]) [ 1946.609608] r5:bf54d014 r4:c2695b00 [ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs]) [ 1946.636217] r7:c0dfcb ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix a use-after-free looks like we forget to set ttm->sg to NULL. Hit panic below [ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 1235.989074] Call Trace: [ 1235.991751] sg_free_table+0x17/0x20 [ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu] [ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu] [ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm] [ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm] [ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm] [ 1236.023547] ttm_bo_put+0x82/0xd0 [ttm] [ 1236.027766] amdgpu_bo_unref+0x26/0x50 [amdgpu] [ 1236.032809] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu] [ 1236.040400] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] [ 1236.046912] kfd_ioctl+0x463/0x690 [amdgpu]

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid racing on fsync_entry_slab by multi filesystem instances As syzbot reported, there is an use-after-free issue during f2fs recovery: Use-after-free write at 0xffff88823bc16040 (in kfence-#10): kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486 f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869 f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945 mount_bdev+0x26c/0x3a0 fs/super.c:1367 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2905 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3235 do_mount fs/namespace.c:3248 [inline] __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is multi f2fs filesystem instances can race on accessing global fsync_entry_slab pointer, result in use-after-free issue of slab cache, fixes to init/destroy this slab cache only once during module init/destroy procedure to avoid this issue.

In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler module Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandl ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xdp, net: Fix use-after-free in bpf_xdp_link_release The problem occurs between dev_get_by_index() and dev_xdp_attach_link(). At this point, dev_xdp_uninstall() is called. Then xdp link will not be detached automatically when dev is released. But link->dev already points to dev, when xdp link is released, dev will still be accessed, but dev has been released. dev_get_by_index() | link->dev = dev | | rtnl_lock() | unregister_netdevice_many() | dev_xdp_uninstall() | rtnl_unlock() rtnl_lock(); | dev_xdp_attach_link() | rtnl_unlock(); | | netdev_run_todo() // dev released bpf_xdp_link_release() | /* access dev. | use-after-free */ | [ 45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0 [ 45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732 [ 45.968297] [ 45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22 [ 45.969222] Hardware name: linux,dummy-virt (DT) [ 45.969795] Call trace: [ 45.970106] dump_backtrace+0x0/0x4c8 [ 45.970564] show_stack+0x30/0x40 [ 45.970981] dump_stack_lvl+0x120/0x18c [ 45.971470] print_address_description.constprop.0+0x74/0x30c [ 45.972182] kasan_report+0x1e8/0x200 [ 45.972659] __asan_report_load8_noabort+0x2c/0x50 [ 45.973273] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.973834] bpf_link_free+0xd0/0x188 [ 45.974315] bpf_link_put+0x1d0/0x218 [ 45.974790] bpf_link_release+0x3c/0x58 [ 45.975291] __fput+0x20c/0x7e8 [ 45.975706] ____fput+0x24/0x30 [ 45.976117] task_work_run+0x104/0x258 [ 45.976609] do_notify_resume+0x894/0xaf8 [ 45.977121] work_pending+0xc/0x328 [ 45.977575] [ 45.977775] The buggy address belongs to the page: [ 45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998 [ 45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff) [ 45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000 [ 45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 45.982259] page dumped because: kasan: bad access detected [ 45.982948] [ 45.983153] Memory state around the buggy address: [ 45.983753] ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.984645] ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.986419] ^ [ 45.987112] ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988006] ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988895] ================================================================== [ 45.989773] Disabling lock debugging due to kernel taint [ 45.990552] Kernel panic - not syncing: panic_on_warn set ... [ 45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G B 5.13.0+ #22 [ 45.991929] Hardware name: linux,dummy-virt (DT) [ 45.992448] Call trace: [ 45.992753] dump_backtrace+0x0/0x4c8 [ 45.993208] show_stack+0x30/0x40 [ 45.993627] dump_stack_lvl+0x120/0x18c [ 45.994113] dump_stack+0x1c/0x34 [ 45.994530] panic+0x3a4/0x7d8 [ 45.994930] end_report+0x194/0x198 [ 45.995380] kasan_report+0x134/0x200 [ 45.995850] __asan_report_load8_noabort+0x2c/0x50 [ 45.996453] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.997007] bpf_link_free+0xd0/0x188 [ 45.997474] bpf_link_put+0x1d0/0x218 [ 45.997942] bpf_link_release+0x3c/0x58 [ 45.998429] __fput+0x20c/0x7e8 [ 45.998833] ____fput+0x24/0x30 [ 45.999247] task_work_run+0x104/0x258 [ 45.999731] do_notify_resume+0x894/0xaf8 [ 46.000236] work_pending ---truncated---

In the Linux kernel, the following vulnerability has been resolved: userfaultfd: release page in error path to avoid BUG_ON Consider the following sequence of events: 1. Userspace issues a UFFD ioctl, which ends up calling into shmem_mfill_atomic_pte(). We successfully account the blocks, we shmem_alloc_page(), but then the copy_from_user() fails. We return -ENOENT. We don't release the page we allocated. 2. Our caller detects this error code, tries the copy_from_user() after dropping the mmap_lock, and retries, calling back into shmem_mfill_atomic_pte(). 3. Meanwhile, let's say another process filled up the tmpfs being used. 4. So shmem_mfill_atomic_pte() fails to account blocks this time, and immediately returns - without releasing the page. This triggers a BUG_ON in our caller, which asserts that the page should always be consumed, unless -ENOENT is returned. To fix this, detect if we have such a "dangling" page when accounting fails, and if so, release it before returning.

In the Linux kernel, the following vulnerability has been resolved: spi: fix use-after-free of the add_lock mutex Commit 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses") introduced a per-controller mutex. But mutex_unlock() of said lock is called after the controller is already freed: spi_unregister_controller(ctlr) -> put_device(&ctlr->dev) -> spi_controller_release(dev) -> mutex_unlock(&ctrl->add_lock) Move the put_device() after the mutex_unlock().

In the Linux kernel, the following vulnerability has been resolved: sctp: use call_rcu to free endpoint This patch is to delay the endpoint free by calling call_rcu() to fix another use-after-free issue in sctp_sock_dump(): BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20 Call Trace: __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] __lock_sock+0x203/0x350 net/core/sock.c:2253 lock_sock_nested+0xfe/0x120 net/core/sock.c:2774 lock_sock include/net/sock.h:1492 [inline] sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324 sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091 sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527 __inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049 inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065 netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170 __sock_diag_cmd net/core/sock_diag.c:232 [inline] sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274 This issue occurs when asoc is peeled off and the old sk is freed after getting it by asoc->base.sk and before calling lock_sock(sk). To prevent the sk free, as a holder of the sk, ep should be alive when calling lock_sock(). This patch uses call_rcu() and moves sock_put and ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to hold the ep under rcu_read_lock in sctp_transport_traverse_process(). If sctp_endpoint_hold() returns true, it means this ep is still alive and we have held it and can continue to dump it; If it returns false, it means this ep is dead and can be freed after rcu_read_unlock, and we should skip it. In sctp_sock_dump(), after locking the sk, if this ep is different from tsp->asoc->ep, it means during this dumping, this asoc was peeled off before calling lock_sock(), and the sk should be skipped; If this ep is the same with tsp->asoc->ep, it means no peeloff happens on this asoc, and due to lock_sock, no peeloff will happen either until release_sock. Note that delaying endpoint free won't delay the port release, as the port release happens in sctp_endpoint_destroy() before calling call_rcu(). Also, freeing endpoint by call_rcu() makes it safe to access the sk by asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv(). Thanks Jones to bring this issue up. v1->v2: - improve the changelog. - add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed.

A use-after-free vulnerability was found in the siano smsusb module in the Linux kernel. The bug occurs during device initialization when the siano device is plugged in. This flaw allows a local user to crash the system, causing a denial of service condition.

A use-after-free vulnerability was found in the cyttsp4_core driver in the Linux kernel. This issue occurs in the device cleanup routine due to a possible rearming of the watchdog_timer from the workqueue. This could allow a local user to crash the system, causing a denial of service.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Handle mailbox timeouts in lpfc_get_sfp_info The MBX_TIMEOUT return code is not handled in lpfc_get_sfp_info and the routine unconditionally frees submitted mailbox commands regardless of return status. The issue is that for MBX_TIMEOUT cases, when firmware returns SFP information at a later time, that same mailbox memory region references previously freed memory in its cmpl routine. Fix by adding checks for the MBX_TIMEOUT return code. During mailbox resource cleanup, check the mbox flag to make sure that the wait did not timeout. If the MBOX_WAKE flag is not set, then do not free the resources because it will be freed when firmware completes the mailbox at a later time in its cmpl routine. Also, increase the timeout from 30 to 60 seconds to accommodate boot scripts requiring longer timeouts.

In the Linux kernel, the following vulnerability has been resolved: kcm: Serialise kcm_sendmsg() for the same socket. syzkaller reported UAF in kcm_release(). [0] The scenario is 1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb. 2. Thread A resumes building skb from kcm->seq_skb but is blocked by sk_stream_wait_memory() 3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb and puts the skb to the write queue 4. Thread A faces an error and finally frees skb that is already in the write queue 5. kcm_release() does double-free the skb in the write queue When a thread is building a MSG_MORE skb, another thread must not touch it. Let's add a per-sk mutex and serialise kcm_sendmsg(). [0]: BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline] BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline] BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167 CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 __skb_unlink include/linux/skbuff.h:2366 [inline] __skb_dequeue include/linux/skbuff.h:2385 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] __skb_queue_purge include/linux/skbuff.h:3181 [inline] kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Allocated by task 6166: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1296 [inline] kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x220/0x2c0 net/socket.c:768 splice_to_socket+0x7cc/0xd58 fs/splice.c:889 do_splice_from fs/splice.c:941 [inline] direct_splice_actor+0xec/0x1d8 fs/splice.c:1164 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108 do_splice_direct_actor ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nvme: move stopping keep-alive into nvme_uninit_ctrl() Commit 4733b65d82bd ("nvme: start keep-alive after admin queue setup") moves starting keep-alive from nvme_start_ctrl() into nvme_init_ctrl_finish(), but don't move stopping keep-alive into nvme_uninit_ctrl(), so keep-alive work can be started and keep pending after failing to start controller, finally use-after-free is triggered if nvme host driver is unloaded. This patch fixes kernel panic when running nvme/004 in case that connection failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl(). This way is reasonable because keep-alive is now started in nvme_init_ctrl_finish().

In the Linux kernel, the following vulnerability has been resolved: netem: fix return value if duplicate enqueue fails There is a bug in netem_enqueue() introduced by commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") that can lead to a use-after-free. This commit made netem_enqueue() always return NET_XMIT_SUCCESS when a packet is duplicated, which can cause the parent qdisc's q.qlen to be mistakenly incremented. When this happens qlen_notify() may be skipped on the parent during destruction, leaving a dangling pointer for some classful qdiscs like DRR. There are two ways for the bug happen: - If the duplicated packet is dropped by rootq->enqueue() and then the original packet is also dropped. - If rootq->enqueue() sends the duplicated packet to a different qdisc and the original packet is dropped. In both cases NET_XMIT_SUCCESS is returned even though no packets are enqueued at the netem qdisc. The fix is to defer the enqueue of the duplicate packet until after the original packet has been guaranteed to return NET_XMIT_SUCCESS.

In the Linux kernel, the following vulnerability has been resolved: net: rswitch: Avoid use-after-free in rswitch_poll() The use-after-free is actually in rswitch_tx_free(), which is inlined in rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the same pointer, the skb is first freed using dev_kfree_skb_any(), then the value in skb->len is used to update the interface statistics. Let's move around the instructions to use skb->len before the skb is freed. This bug is trivial to reproduce using KFENCE. It will trigger a splat every few packets. A simple ARP request or ICMP echo request is enough.

In the Linux kernel, the following vulnerability has been resolved: libceph: fix race between delayed_work() and ceph_monc_stop() The way the delayed work is handled in ceph_monc_stop() is prone to races with mon_fault() and possibly also finish_hunting(). Both of these can requeue the delayed work which wouldn't be canceled by any of the following code in case that happens after cancel_delayed_work_sync() runs -- __close_session() doesn't mess with the delayed work in order to avoid interfering with the hunting interval logic. This part was missed in commit b5d91704f53e ("libceph: behave in mon_fault() if cur_mon < 0") and use-after-free can still ensue on monc and objects that hang off of it, with monc->auth and monc->monmap being particularly susceptible to quickly being reused. To fix this: - clear monc->cur_mon and monc->hunting as part of closing the session in ceph_monc_stop() - bail from delayed_work() if monc->cur_mon is cleared, similar to how it's done in mon_fault() and finish_hunting() (based on monc->hunting) - call cancel_delayed_work_sync() after the session is closed

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix too early release of tcx_entry Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported an issue that the tcx_entry can be released too early leading to a use after free (UAF) when an active old-style ingress or clsact qdisc with a shared tc block is later replaced by another ingress or clsact instance. Essentially, the sequence to trigger the UAF (one example) can be as follows: 1. A network namespace is created 2. An ingress qdisc is created. This allocates a tcx_entry, and &tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the same time, a tcf block with index 1 is created. 3. chain0 is attached to the tcf block. chain0 must be connected to the block linked to the ingress qdisc to later reach the function tcf_chain0_head_change_cb_del() which triggers the UAF. 4. Create and graft a clsact qdisc. This causes the ingress qdisc created in step 1 to be removed, thus freeing the previously linked tcx_entry: rtnetlink_rcv_msg() => tc_modify_qdisc() => qdisc_create() => clsact_init() [a] => qdisc_graft() => qdisc_destroy() => __qdisc_destroy() => ingress_destroy() [b] => tcx_entry_free() => kfree_rcu() // tcx_entry freed 5. Finally, the network namespace is closed. This registers the cleanup_net worker, and during the process of releasing the remaining clsact qdisc, it accesses the tcx_entry that was already freed in step 4, causing the UAF to occur: cleanup_net() => ops_exit_list() => default_device_exit_batch() => unregister_netdevice_many() => unregister_netdevice_many_notify() => dev_shutdown() => qdisc_put() => clsact_destroy() [c] => tcf_block_put_ext() => tcf_chain0_head_change_cb_del() => tcf_chain_head_change_item() => clsact_chain_head_change() => mini_qdisc_pair_swap() // UAF There are also other variants, the gist is to add an ingress (or clsact) qdisc with a specific shared block, then to replace that qdisc, waiting for the tcx_entry kfree_rcu() to be executed and subsequently accessing the current active qdisc's miniq one way or another. The correct fix is to turn the miniq_active boolean into a counter. What can be observed, at step 2 above, the counter transitions from 0->1, at step [a] from 1->2 (in order for the miniq object to remain active during the replacement), then in [b] from 2->1 and finally [c] 1->0 with the eventual release. The reference counter in general ranges from [0,2] and it does not need to be atomic since all access to the counter is protected by the rtnl mutex. With this in place, there is no longer a UAF happening and the tcx_entry is freed at the correct time.

A use after free flaw was found in hfsplus_put_super in fs/hfsplus/super.c in the Linux Kernel. This flaw could allow a local user to cause a denial of service problem.

A use-after-free flaw was found in the add_partition in block/partitions/core.c in the Linux kernel. A local attacker with user privileges could cause a denial of service on the system. The issue results from the lack of code cleanup when device_add call fails when adding a partition to the disk.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Avoid potential use-after-free in hci_error_reset While handling the HCI_EV_HARDWARE_ERROR event, if the underlying BT controller is not responding, the GPIO reset mechanism would free the hci_dev and lead to a use-after-free in hci_error_reset. Here's the call trace observed on a ChromeOS device with Intel AX201: queue_work_on+0x3e/0x6c __hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth <HASH:3b4a6>] ? init_wait_entry+0x31/0x31 __hci_cmd_sync+0x16/0x20 [bluetooth <HASH:3b4a 6>] hci_error_reset+0x4f/0xa4 [bluetooth <HASH:3b4a 6>] process_one_work+0x1d8/0x33f worker_thread+0x21b/0x373 kthread+0x13a/0x152 ? pr_cont_work+0x54/0x54 ? kthread_blkcg+0x31/0x31 ret_from_fork+0x1f/0x30 This patch holds the reference count on the hci_dev while processing a HCI_EV_HARDWARE_ERROR event to avoid potential crash.

In the Linux kernel, the following vulnerability has been resolved: spi: lpspi: Avoid potential use-after-free in probe() fsl_lpspi_probe() is allocating/disposing memory manually with spi_alloc_host()/spi_alloc_target(), but uses devm_spi_register_controller(). In case of error after the latter call the memory will be explicitly freed in the probe function by spi_controller_put() call, but used afterwards by "devm" management outside probe() (spi_unregister_controller() <- devm_spi_unregister() below). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 ... Call trace: kernfs_find_ns kernfs_find_and_get_ns sysfs_remove_group sysfs_remove_groups device_remove_attrs device_del spi_unregister_controller devm_spi_unregister release_nodes devres_release_all really_probe driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix possible use-after-free and null-ptr-deref The pernet operations structure for the subsystem must be registered before registering the generic netlink family.

In the Linux kernel through 6.7.1, there is a use-after-free in cec_queue_msg_fh, related to drivers/media/cec/core/cec-adap.c and drivers/media/cec/core/cec-api.c.

In the Linux kernel, the following vulnerability has been resolved: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() irq_find_at_or_after() dereferences the interrupt descriptor which is returned by mt_find() while neither holding sparse_irq_lock nor RCU read lock, which means the descriptor can be freed between mt_find() and the dereference: CPU0 CPU1 desc = mt_find() delayed_free_desc(desc) irq_desc_get_irq(desc) The use-after-free is reported by KASAN: Call trace: irq_get_next_irq+0x58/0x84 show_stat+0x638/0x824 seq_read_iter+0x158/0x4ec proc_reg_read_iter+0x94/0x12c vfs_read+0x1e0/0x2c8 Freed by task 4471: slab_free_freelist_hook+0x174/0x1e0 __kmem_cache_free+0xa4/0x1dc kfree+0x64/0x128 irq_kobj_release+0x28/0x3c kobject_put+0xcc/0x1e0 delayed_free_desc+0x14/0x2c rcu_do_batch+0x214/0x720 Guard the access with a RCU read lock section.

In the Linux kernel, the following vulnerability has been resolved: phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered The power_supply frame-work is not really designed for there to be long living in kernel references to power_supply devices. Specifically unregistering a power_supply while some other code has a reference to it triggers a WARN in power_supply_unregister(): WARN_ON(atomic_dec_return(&psy->use_cnt)); Folllowed by the power_supply still getting removed and the backing data freed anyway, leaving the tusb1210 charger-detect code with a dangling reference, resulting in a crash the next time tusb1210_get_online() is called. Fix this by only holding the reference in tusb1210_get_online() freeing it at the end of the function. Note this still leaves a theoretical race window, but it avoids the issue when manually rmmod-ing the charger chip driver during development.

Use after free in some Intel(R) Aptio* V UEFI Firmware Integrator Tools may allowed an authenticated user to potentially enable denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pmic_glink_altmode: fix drm bridge use-after-free A recent DRM series purporting to simplify support for "transparent bridges" and handling of probe deferrals ironically exposed a use-after-free issue on pmic_glink_altmode probe deferral. This has manifested itself as the display subsystem occasionally failing to initialise and NULL-pointer dereferences during boot of machines like the Lenovo ThinkPad X13s. Specifically, the dp-hpd bridge is currently registered before all resources have been acquired which means that it can also be deregistered on probe deferrals. In the meantime there is a race window where the new aux bridge driver (or PHY driver previously) may have looked up the dp-hpd bridge and stored a (non-reference-counted) pointer to the bridge which is about to be deallocated. When the display controller is later initialised, this triggers a use-after-free when attaching the bridges: dp -> aux -> dp-hpd (freed) which may, for example, result in the freed bridge failing to attach: [drm:drm_bridge_attach [drm]] *ERROR* failed to attach bridge /soc@0/phy@88eb000 to encoder TMDS-31: -16 or a NULL-pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Call trace: drm_bridge_attach+0x70/0x1a8 [drm] drm_aux_bridge_attach+0x24/0x38 [aux_bridge] drm_bridge_attach+0x80/0x1a8 [drm] dp_bridge_init+0xa8/0x15c [msm] msm_dp_modeset_init+0x28/0xc4 [msm] The DRM bridge implementation is clearly fragile and implicitly built on the assumption that bridges may never go away. In this case, the fix is to move the bridge registration in the pmic_glink_altmode driver to after all resources have been looked up. Incidentally, with the new dp-hpd bridge implementation, which registers child devices, this is also a requirement due to a long-standing issue in driver core that can otherwise lead to a probe deferral loop (see commit fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER")). [DB: slightly fixed commit message by adding the word 'commit']

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free bug The bug can be triggered by sending a single amdgpu_gem_userptr_ioctl to the AMDGPU DRM driver on any ASICs with an invalid address and size. The bug was reported by Joonkyo Jung <joonkyoj@yonsei.ac.kr>. For example the following code: static void Syzkaller1(int fd) { struct drm_amdgpu_gem_userptr arg; int ret; arg.addr = 0xffffffffffff0000; arg.size = 0x80000000; /*2 Gb*/ arg.flags = 0x7; ret = drmIoctl(fd, 0xc1186451/*amdgpu_gem_userptr_ioctl*/, &arg); } Due to the address and size are not valid there is a failure in amdgpu_hmm_register->mmu_interval_notifier_insert->__mmu_interval_notifier_insert-> check_shl_overflow, but we even the amdgpu_hmm_register failure we still call amdgpu_hmm_unregister into amdgpu_gem_object_free which causes access to a bad address. The following stack is below when the issue is reproduced when Kazan is enabled: [ +0.000014] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000009] RIP: 0010:mmu_interval_notifier_remove+0x327/0x340 [ +0.000017] Code: ff ff 49 89 44 24 08 48 b8 00 01 00 00 00 00 ad de 4c 89 f7 49 89 47 40 48 83 c0 22 49 89 47 48 e8 ce d1 2d 01 e9 32 ff ff ff <0f> 0b e9 16 ff ff ff 4c 89 ef e8 fa 14 b3 ff e9 36 ff ff ff e8 80 [ +0.000014] RSP: 0018:ffffc90002657988 EFLAGS: 00010246 [ +0.000013] RAX: 0000000000000000 RBX: 1ffff920004caf35 RCX: ffffffff8160565b [ +0.000011] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8881a9f78260 [ +0.000010] RBP: ffffc90002657a70 R08: 0000000000000001 R09: fffff520004caf25 [ +0.000010] R10: 0000000000000003 R11: ffffffff8161d1d6 R12: ffff88810e988c00 [ +0.000010] R13: ffff888126fb5a00 R14: ffff88810e988c0c R15: ffff8881a9f78260 [ +0.000011] FS: 00007ff9ec848540(0000) GS:ffff8883cc880000(0000) knlGS:0000000000000000 [ +0.000012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000010] CR2: 000055b3f7e14328 CR3: 00000001b5770000 CR4: 0000000000350ef0 [ +0.000010] Call Trace: [ +0.000006] <TASK> [ +0.000007] ? show_regs+0x6a/0x80 [ +0.000018] ? __warn+0xa5/0x1b0 [ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340 [ +0.000018] ? report_bug+0x24a/0x290 [ +0.000022] ? handle_bug+0x46/0x90 [ +0.000015] ? exc_invalid_op+0x19/0x50 [ +0.000016] ? asm_exc_invalid_op+0x1b/0x20 [ +0.000017] ? kasan_save_stack+0x26/0x50 [ +0.000017] ? mmu_interval_notifier_remove+0x23b/0x340 [ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340 [ +0.000019] ? mmu_interval_notifier_remove+0x23b/0x340 [ +0.000020] ? __pfx_mmu_interval_notifier_remove+0x10/0x10 [ +0.000017] ? kasan_save_alloc_info+0x1e/0x30 [ +0.000018] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? __kasan_kmalloc+0xb1/0xc0 [ +0.000018] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? __kasan_check_read+0x11/0x20 [ +0.000020] amdgpu_hmm_unregister+0x34/0x50 [amdgpu] [ +0.004695] amdgpu_gem_object_free+0x66/0xa0 [amdgpu] [ +0.004534] ? __pfx_amdgpu_gem_object_free+0x10/0x10 [amdgpu] [ +0.004291] ? do_syscall_64+0x5f/0xe0 [ +0.000023] ? srso_return_thunk+0x5/0x5f [ +0.000017] drm_gem_object_free+0x3b/0x50 [drm] [ +0.000489] amdgpu_gem_userptr_ioctl+0x306/0x500 [amdgpu] [ +0.004295] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004270] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? __this_cpu_preempt_check+0x13/0x20 [ +0.000015] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ +0.000020] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ +0.000022] ? drm_ioctl_kernel+0x17b/0x1f0 [drm] [ +0.000496] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004272] ? drm_ioctl_kernel+0x190/0x1f0 [drm] [ +0.000492] drm_ioctl_kernel+0x140/0x1f0 [drm] [ +0.000497] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004297] ? __pfx_drm_ioctl_kernel+0x10/0x10 [d ---truncated---

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix KASAN issue with tasklet KASAN testing revealed the following issue assocated with freeing an IRQ. [50006.466686] Call Trace: [50006.466691] <IRQ> [50006.489538] dump_stack+0x5c/0x80 [50006.493475] print_address_description.constprop.6+0x1a/0x150 [50006.499872] ? irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.505742] ? irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.511644] kasan_report.cold.11+0x7f/0x118 [50006.516572] ? irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.522473] irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.528232] irdma_process_ceq+0xb2/0x400 [irdma] [50006.533601] ? irdma_hw_flush_wqes_callback+0x370/0x370 [irdma] [50006.540298] irdma_ceq_dpc+0x44/0x100 [irdma] [50006.545306] tasklet_action_common.isra.14+0x148/0x2c0 [50006.551096] __do_softirq+0x1d0/0xaf8 [50006.555396] irq_exit_rcu+0x219/0x260 [50006.559670] irq_exit+0xa/0x20 [50006.563320] smp_apic_timer_interrupt+0x1bf/0x690 [50006.568645] apic_timer_interrupt+0xf/0x20 [50006.573341] </IRQ> The issue is that a tasklet could be pending on another core racing the delete of the irq. Fix by insuring any scheduled tasklet is killed after deleting the irq.

A use-after-free flaw was found in the Linux kernel’s core dump subsystem. This flaw allows a local user to crash the system. Only if patch 390031c94211 ("coredump: Use the vma snapshot in fill_files_note") not applied yet, then kernel could be affected.

A use-after-free flaw was found in io_uring/filetable.c in io_install_fixed_file in the io_uring subcomponent in the Linux Kernel during call cleanup. This flaw may lead to a denial of service.

A use-after-free flaw was found in reconn_set_ipaddr_from_hostname in fs/cifs/connect.c in the Linux kernel. The issue occurs when it forgets to set the free pointer server->hostname to NULL, leading to an invalid pointer request.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: fix possible use-after-free Eric Dumazet says: The sock_hold() side seems suspect, because there is no guarantee that sk_refcnt is not already 0. On failure, we cannot queue the packet and need to indicate an error. The packet will be dropped by the caller. v2: split skb prefetch hunk into separate change

In the Linux kernel, the following vulnerability has been resolved: NFC: port100: fix use-after-free in port100_send_complete Syzbot reported UAF in port100_send_complete(). The root case is in missing usb_kill_urb() calls on error handling path of ->probe function. port100_send_complete() accesses devm allocated memory which will be freed on probe failure. We should kill this urbs before returning an error from probe function to prevent reported use-after-free Fail log: BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670 ... Allocated by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524 alloc_dr drivers/base/devres.c:116 [inline] devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823 devm_kzalloc include/linux/device.h:209 [inline] port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502 Freed by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:236 [inline] __cache_free mm/slab.c:3437 [inline] kfree+0xf8/0x2b0 mm/slab.c:3794 release_nodes+0x112/0x1a0 drivers/base/devres.c:501 devres_release_all+0x114/0x190 drivers/base/devres.c:530 really_probe+0x626/0xcc0 drivers/base/dd.c:670

In the Linux kernel, the following vulnerability has been resolved: vdpa: fix use-after-free on vp_vdpa_remove When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove, triggering use-after-free. Call Trace of unbinding driver free vp_vdpa : do_syscall_64 vfs_write kernfs_fop_write_iter device_release_driver_internal pci_device_remove vp_vdpa_remove vdpa_unregister_device kobject_release device_release kfree Call Trace of dereference vp_vdpa->mdev.pci_dev: vp_modern_remove pci_release_selected_regions pci_release_region pci_resource_len pci_resource_end (dev)->resource[(bar)].end

An issue was discovered in the Linux kernel 5.10.x before 5.10.155. A use-after-free in io_sqpoll_wait_sq in fs/io_uring.c allows an attacker to crash the kernel, resulting in denial of service. finish_wait can be skipped. An attack can occur in some situations by forking a process and then quickly terminating it. NOTE: later kernel versions, such as the 5.15 longterm series, substantially changed the implementation of io_sqpoll_wait_sq.

A flaw was found in the Linux kernel's implementation of GRO in versions before 5.2. This flaw allows an attacker with local access to crash the system.

The __do_follow_link function in fs/namei.c in the Linux kernel before 2.6.33 does not properly handle the last pathname component during use of certain filesystems, which allows local users to cause a denial of service (incorrect free operations and system crash) via an open system call.

In the Linux kernel, the following vulnerability has been resolved: btrfs: wait for fixup workers before stopping cleaner kthread during umount During unmount, at close_ctree(), we have the following steps in this order: 1) Park the cleaner kthread - this doesn't destroy the kthread, it basically halts its execution (wake ups against it work but do nothing); 2) We stop the cleaner kthread - this results in freeing the respective struct task_struct; 3) We call btrfs_stop_all_workers() which waits for any jobs running in all the work queues and then free the work queues. Syzbot reported a case where a fixup worker resulted in a crash when doing a delayed iput on its inode while attempting to wake up the cleaner at btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread was already freed. This can happen during unmount because we don't wait for any fixup workers still running before we call kthread_stop() against the cleaner kthread, which stops and free all its resources. Fix this by waiting for any fixup workers at close_ctree() before we call kthread_stop() against the cleaner and run pending delayed iputs. The stack traces reported by syzbot were the following: BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: btrfs-fixup btrfs_work_helper Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline] try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154 btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842 btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 2: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4086 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1107 copy_process+0x5d1/0x3d50 kernel/fork.c:2206 kernel_clone+0x223/0x880 kernel/fork.c:2787 kernel_thread+0x1bc/0x240 kernel/fork.c:2849 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:765 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 61: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_h ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: Fix use-after-free bug by not setting udc->dev.driver The syzbot fuzzer found a use-after-free bug: BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320 Read of size 8 at addr ffff88802b934098 by task udevd/3689 CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 dev_uevent+0x712/0x780 drivers/base/core.c:2320 uevent_show+0x1b8/0x380 drivers/base/core.c:2391 dev_attr_show+0x4b/0x90 drivers/base/core.c:2094 Although the bug manifested in the driver core, the real cause was a race with the gadget core. dev_uevent() does: if (dev->driver) add_uevent_var(env, "DRIVER=%s", dev->driver->name); and between the test and the dereference of dev->driver, the gadget core sets dev->driver to NULL. The race wouldn't occur if the gadget core registered its devices on a real bus, using the standard synchronization techniques of the driver core. However, it's not necessary to make such a large change in order to fix this bug; all we need to do is make sure that udc->dev.driver is always NULL. In fact, there is no reason for udc->dev.driver ever to be set to anything, let alone to the value it currently gets: the address of the gadget's driver. After all, a gadget driver only knows how to manage a gadget, not how to manage a UDC. This patch simply removes the statements in the gadget core that touch udc->dev.driver.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix leaking sent_cmd skb sent_cmd memory is not freed before freeing hci_dev causing it to leak it contents.