In the Linux kernel, the following vulnerability has been resolved: scsi: qla1280: Fix kernel oops when debug level > 2 A null dereference or oops exception will eventually occur when qla1280.c driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I think its clear from the code that the intention here is sg_dma_len(s) not length of sg_next(s) when printing the debug info.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix possible crash when setting up bsg fails If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value. Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)" will not be satisfied, preventing execution from entering bsg_remove_queue(), which could lead to the following crash: BUG: kernel NULL pointer dereference, address: 000000000000041c Call Trace: <TASK> mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr] mpi3mr_remove+0x6f/0x340 [mpi3mr] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19d/0x220 unbind_store+0xa4/0xb0 kernfs_fop_write_iter+0x11f/0x200 vfs_write+0x1fc/0x3e0 ksys_write+0x67/0xe0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x78/0xe2

In the Linux kernel, the following vulnerability has been resolved: netlabel: Fix NULL pointer exception caused by CALIPSO on IPv4 sockets When calling netlbl_conn_setattr(), addr->sa_family is used to determine the function behavior. If sk is an IPv4 socket, but the connect function is called with an IPv6 address, the function calipso_sock_setattr() is triggered. Inside this function, the following code is executed: sk_fullsock(__sk) ? inet_sk(__sk)->pinet6 : NULL; Since sk is an IPv4 socket, pinet6 is NULL, leading to a null pointer dereference. This patch fixes the issue by checking if inet6_sk(sk) returns a NULL pointer before accessing pinet6.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() On removal of the device or unloading of the kernel module a potential NULL pointer dereference occurs. The following sequence deletes the interface: brcmf_detach() brcmf_remove_interface() brcmf_del_if() Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches. After brcmf_remove_interface() call the brcmf_proto_detach() function is called providing the following sequence: brcmf_detach() brcmf_proto_detach() brcmf_proto_msgbuf_detach() brcmf_flowring_detach() brcmf_msgbuf_delete_flowring() brcmf_msgbuf_remove_flowring() brcmf_flowring_delete() brcmf_get_ifp() brcmf_txfinalize() Since brcmf_get_ip() can and actually will return NULL in this case the call to brcmf_txfinalize() will result in a NULL pointer dereference inside brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors. This will only happen if a flowring still has an skb. Although the NULL pointer dereference has only been seen when trying to update the tx statistic, all other uses of the ifp pointer have been guarded as well with an early return if ifp is NULL.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Add check for mgmt_alloc_skb() in mgmt_remote_name() Add check for the return value of mgmt_alloc_skb() in mgmt_remote_name() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: caif_virtio: fix wrong pointer check in cfv_probe() del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked for NULL before calling it, not cfv->vdev. Also the current implementation is redundant because the pointer cfv->vdev is dereferenced before it is checked for NULL. Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before calling del_vqs().

In the Linux kernel, the following vulnerability has been resolved: arm: pgtable: fix NULL pointer dereference issue When update_mmu_cache_range() is called by update_mmu_cache(), the vmf parameter is NULL, which will cause a NULL pointer dereference issue in adjust_pte(): Unable to handle kernel NULL pointer dereference at virtual address 00000030 when read Hardware name: Atmel AT91SAM9 PC is at update_mmu_cache_range+0x1e0/0x278 LR is at pte_offset_map_rw_nolock+0x18/0x2c Call trace: update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec remove_migration_pte from rmap_walk_file+0xcc/0x130 rmap_walk_file from remove_migration_ptes+0x90/0xa4 remove_migration_ptes from migrate_pages_batch+0x6d4/0x858 migrate_pages_batch from migrate_pages+0x188/0x488 migrate_pages from compact_zone+0x56c/0x954 compact_zone from compact_node+0x90/0xf0 compact_node from kcompactd+0x1d4/0x204 kcompactd from kthread+0x120/0x12c kthread from ret_from_fork+0x14/0x38 Exception stack(0xc0d8bfb0 to 0xc0d8bff8) To fix it, do not rely on whether 'ptl' is equal to decide whether to hold the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is enabled. In addition, if two vmas map to the same PTE page, there is no need to hold the pte lock again, otherwise a deadlock will occur. Just add the need_lock parameter to let adjust_pte() know this information.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is used.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add sanity checks on rdev validity There is a possibility that ulp_irq_stop and ulp_irq_start callbacks will be called when the device is in detached state. This can cause a crash due to NULL pointer dereference as the rdev is already freed.

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: Don't unset window if it was never set On pSeries, when user attempts to use the same vfio container used by different iommu group, the spapr_tce_set_window() returns -EPERM and the subsequent cleanup leads to the below crash. Kernel attempted to read user page (308) - exploit attempt? BUG: Kernel NULL pointer dereference on read at 0x00000308 Faulting instruction address: 0xc0000000001ce358 Oops: Kernel access of bad area, sig: 11 [#1] NIP: c0000000001ce358 LR: c0000000001ce05c CTR: c00000000005add0 <snip> NIP [c0000000001ce358] spapr_tce_unset_window+0x3b8/0x510 LR [c0000000001ce05c] spapr_tce_unset_window+0xbc/0x510 Call Trace: spapr_tce_unset_window+0xbc/0x510 (unreliable) tce_iommu_attach_group+0x24c/0x340 [vfio_iommu_spapr_tce] vfio_container_attach_group+0xec/0x240 [vfio] vfio_group_fops_unl_ioctl+0x548/0xb00 [vfio] sys_ioctl+0x754/0x1580 system_call_exception+0x13c/0x330 system_call_vectored_common+0x15c/0x2ec <snip> --- interrupt: 3000 Fix this by having null check for the tbl passed to the spapr_tce_unset_window().

In the Linux kernel, the following vulnerability has been resolved: can: ctucanfd: handle skb allocation failure If skb allocation fails, the pointer to struct can_frame is NULL. This is actually handled everywhere inside ctucan_err_interrupt() except for the only place. Add the missed NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is sent on HIP08 devices Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180

In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-card: Add NULL check in imx_card_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, imx_card_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data() The nullity of sps->cstream should be checked similarly as it is done in sof_set_stream_data_offset() function. Assuming that it is not NULL if sps->stream is NULL is incorrect and can lead to NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected() Add check for the return value of mgmt_alloc_skb() in mgmt_device_connected() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: udp_port: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure.

In the Linux kernel, the following vulnerability has been resolved: vsock/bpf: return early if transport is not assigned Some of the core functions can only be called if the transport has been assigned. As Michal reported, a socket might have the transport at NULL, for example after a failed connect(), causing the following trace: BUG: kernel NULL pointer dereference, address: 00000000000000a0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+ RIP: 0010:vsock_connectible_has_data+0x1f/0x40 Call Trace: vsock_bpf_recvmsg+0xca/0x5e0 sock_recvmsg+0xb9/0xc0 __sys_recvfrom+0xb3/0x130 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e So we need to check the `vsk->transport` in vsock_bpf_recvmsg(), especially for connected sockets (stream/seqpacket) as we already do in __vsock_connectible_recvmsg().

In the Linux kernel, the following vulnerability has been resolved: arcnet: Add NULL check in com20020pci_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, com20020pci_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensure no resources are left allocated.

In the Linux kernel, the following vulnerability has been resolved: idpf: fix adapter NULL pointer dereference on reboot With SRIOV enabled, idpf ends up calling into idpf_remove() twice. First via idpf_shutdown() and then again when idpf_remove() calls into sriov_disable(), because the VF devices use the idpf driver, hence the same remove routine. When that happens, it is possible for the adapter to be NULL from the first call to idpf_remove(), leading to a NULL pointer dereference. echo 1 > /sys/class/net/<netif>/device/sriov_numvfs reboot BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:idpf_remove+0x22/0x1f0 [idpf] ... ? idpf_remove+0x22/0x1f0 [idpf] ? idpf_remove+0x1e4/0x1f0 [idpf] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19f/0x200 pci_stop_bus_device+0x6d/0x90 pci_stop_and_remove_bus_device+0x12/0x20 pci_iov_remove_virtfn+0xbe/0x120 sriov_disable+0x34/0xe0 idpf_sriov_configure+0x58/0x140 [idpf] idpf_remove+0x1b9/0x1f0 [idpf] idpf_shutdown+0x12/0x30 [idpf] pci_device_shutdown+0x35/0x60 device_shutdown+0x156/0x200 ... Replace the direct idpf_remove() call in idpf_shutdown() with idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform the bulk of the cleanup, such as stopping the init task, freeing IRQs, destroying the vports and freeing the mailbox. This avoids the calls to sriov_disable() in addition to a small netdev cleanup, and destroying workqueues, which don't seem to be required on shutdown.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in alloc_preauth_hash() The Client send malformed smb2 negotiate request. ksmbd return error response. Subsequently, the client can send smb2 session setup even thought conn->preauth_info is not allocated. This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore session setup request if smb2 negotiate phase is not complete.

In the Linux kernel, the following vulnerability has been resolved: staging: gpib: Fix Oops after disconnect in agilent usb If the agilent usb dongle is disconnected subsequent calls to the driver cause a NULL dereference Oops as the bus_interface is set to NULL on disconnect. This problem was introduced by setting usb_dev from the bus_interface for dev_xxx messages. Previously bus_interface was checked for NULL only in the functions directly calling usb_fill_bulk_urb or usb_control_msg. Check for valid bus_interface on all interface entry points and return -ENODEV if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Clear port select structure when fail to create Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb() This patch addresses a null-ptr-deref in qt2_process_read_urb() due to an incorrect bounds check in the following: if (newport > serial->num_ports) { dev_err(&port->dev, "%s - port change to invalid port: %i\n", __func__, newport); break; } The condition doesn't account for the valid range of the serial->port buffer, which is from 0 to serial->num_ports - 1. When newport is equal to serial->num_ports, the assignment of "port" in the following code is out-of-bounds and NULL: serial_priv->current_port = newport; port = serial->port[serial_priv->current_port]; The fix checks if newport is greater than or equal to serial->num_ports indicating it is out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: auth_enable: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix NULL pointer access Resources should be released only after all threads that utilize them have been destroyed. This commit ensures that resources are not released prematurely by waiting for the associated workqueue to complete before deallocating them.

In the Linux kernel, the following vulnerability has been resolved: net: fec: handle page_pool_dev_alloc_pages error The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet.

In the Linux kernel, the following vulnerability has been resolved: nfp: bpf: Add check for nfp_app_ctrl_msg_alloc() Add check for the return value of nfp_app_ctrl_msg_alloc() in nfp_bpf_cmsg_alloc() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: btrfs: avoid NULL pointer dereference if no valid extent tree [BUG] Syzbot reported a crash with the following call trace: BTRFS info (device loop0): scrub: started on devid 1 BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs] scrub_simple_mirror+0x175/0x260 [btrfs] scrub_stripe+0x5d4/0x6c0 [btrfs] scrub_chunk+0xbb/0x170 [btrfs] scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs] btrfs_scrub_dev+0x240/0x600 [btrfs] btrfs_ioctl+0x1dc8/0x2fa0 [btrfs] ? do_sys_openat2+0xa5/0xf0 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [CAUSE] The reproducer is using a corrupted image where extent tree root is corrupted, thus forcing to use "rescue=all,ro" mount option to mount the image. Then it triggered a scrub, but since scrub relies on extent tree to find where the data/metadata extents are, scrub_find_fill_first_stripe() relies on an non-empty extent root. But unfortunately scrub_find_fill_first_stripe() doesn't really expect an NULL pointer for extent root, it use extent_root to grab fs_info and triggered a NULL pointer dereference. [FIX] Add an extra check for a valid extent root at the beginning of scrub_find_fill_first_stripe(). The new error path is introduced by 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots"), but that's pretty old, and later commit b979547513ff ("btrfs: scrub: introduce helper to find and fill sector info for a scrub_stripe") changed how we do scrub. So for kernels older than 6.6, the fix will need manual backport.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: rto_min/max: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is used.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params Null pointer dereference issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not null before accessing. This prevents a null pointer dereference. Found by code review. (cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092)

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context If a driver calls can_get_echo_skb() during a hardware IRQ (which is often, but not always, the case), the 'WARN_ON(in_irq)' in net/core/skbuff.c#skb_release_head_state() might be triggered, under network congestion circumstances, together with the potential risk of a NULL pointer dereference. The root cause of this issue is the call to kfree_skb() instead of dev_kfree_skb_irq() in net/core/dev.c#enqueue_to_backlog(). This patch prevents the skb to be freed within the call to netif_rx() by incrementing its reference count with skb_get(). The skb is finally freed by one of the in-irq-context safe functions: dev_consume_skb_any() or dev_kfree_skb_any(). The "any" version is used because some drivers might call can_get_echo_skb() in a normal context. The reason for this issue to occur is that initially, in the core network stack, loopback skb were not supposed to be received in hardware IRQ context. The CAN stack is an exeption. This bug was previously reported back in 2017 in [1] but the proposed patch never got accepted. While [1] directly modifies net/core/dev.c, we try to propose here a smoother modification local to CAN network stack (the assumption behind is that only CAN devices are affected by this issue). [1] http://lore.kernel.org/r/57a3ffb6-3309-3ad5-5a34-e93c3fe3614d@cetitec.com

In the Linux kernel, the following vulnerability has been resolved: nfs: fix panic when nfs4_ff_layout_prepare_ds() fails We've been seeing the following panic in production BUG: kernel NULL pointer dereference, address: 0000000000000065 PGD 2f485f067 P4D 2f485f067 PUD 2cc5d8067 PMD 0 RIP: 0010:ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles] Call Trace: <TASK> ? __die+0x78/0xc0 ? page_fault_oops+0x286/0x380 ? __rpc_execute+0x2c3/0x470 [sunrpc] ? rpc_new_task+0x42/0x1c0 [sunrpc] ? exc_page_fault+0x5d/0x110 ? asm_exc_page_fault+0x22/0x30 ? ff_layout_free_layoutreturn+0x110/0x110 [nfs_layout_flexfiles] ? ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles] ? ff_layout_cancel_io+0x6f/0x90 [nfs_layout_flexfiles] pnfs_mark_matching_lsegs_return+0x1b0/0x360 [nfsv4] pnfs_error_mark_layout_for_return+0x9e/0x110 [nfsv4] ? ff_layout_send_layouterror+0x50/0x160 [nfs_layout_flexfiles] nfs4_ff_layout_prepare_ds+0x11f/0x290 [nfs_layout_flexfiles] ff_layout_pg_init_write+0xf0/0x1f0 [nfs_layout_flexfiles] __nfs_pageio_add_request+0x154/0x6c0 [nfs] nfs_pageio_add_request+0x26b/0x380 [nfs] nfs_do_writepage+0x111/0x1e0 [nfs] nfs_writepages_callback+0xf/0x30 [nfs] write_cache_pages+0x17f/0x380 ? nfs_pageio_init_write+0x50/0x50 [nfs] ? nfs_writepages+0x6d/0x210 [nfs] ? nfs_writepages+0x6d/0x210 [nfs] nfs_writepages+0x125/0x210 [nfs] do_writepages+0x67/0x220 ? generic_perform_write+0x14b/0x210 filemap_fdatawrite_wbc+0x5b/0x80 file_write_and_wait_range+0x6d/0xc0 nfs_file_fsync+0x81/0x170 [nfs] ? nfs_file_mmap+0x60/0x60 [nfs] __x64_sys_fsync+0x53/0x90 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Inspecting the core with drgn I was able to pull this >>> prog.crashed_thread().stack_trace()[0] #0 at 0xffffffffa079657a (ff_layout_cancel_io+0x3a/0x84) in ff_layout_cancel_io at fs/nfs/flexfilelayout/flexfilelayout.c:2021:27 >>> prog.crashed_thread().stack_trace()[0]['idx'] (u32)1 >>> prog.crashed_thread().stack_trace()[0]['flseg'].mirror_array[1].mirror_ds (struct nfs4_ff_layout_ds *)0xffffffffffffffed This is clear from the stack trace, we call nfs4_ff_layout_prepare_ds() which could error out initializing the mirror_ds, and then we go to clean it all up and our check is only for if (!mirror->mirror_ds). This is inconsistent with the rest of the users of mirror_ds, which have if (IS_ERR_OR_NULL(mirror_ds)) to keep from tripping over this exact scenario. Fix this up in ff_layout_cancel_io() to make sure we don't panic when we get an error. I also spot checked all the other instances of checking mirror_ds and we appear to be doing the correct checks everywhere, only unconditionally dereferencing mirror_ds when we know it would be valid.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Move events notifier registration to be after device registration Move pkey change work initialization and cleanup from device resources stage to notifier stage, since this is the stage which handles this work events. Fix a race between the device deregistration and pkey change work by moving MLX5_IB_STAGE_DEVICE_NOTIFIER to be after MLX5_IB_STAGE_IB_REG in order to ensure that the notifier is deregistered before the device during cleanup. Which ensures there are no works that are being executed after the device has already unregistered which can cause the panic below. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 630071 Comm: kworker/1:2 Kdump: loaded Tainted: G W OE --------- --- 5.14.0-162.6.1.el9_1.x86_64 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090008 02/27/2023 Workqueue: events pkey_change_handler [mlx5_ib] RIP: 0010:setup_qp+0x38/0x1f0 [mlx5_ib] Code: ee 41 54 45 31 e4 55 89 f5 53 48 89 fb 48 83 ec 20 8b 77 08 65 48 8b 04 25 28 00 00 00 48 89 44 24 18 48 8b 07 48 8d 4c 24 16 <4c> 8b 38 49 8b 87 80 0b 00 00 4c 89 ff 48 8b 80 08 05 00 00 8b 40 RSP: 0018:ffffbcc54068be20 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff954054494128 RCX: ffffbcc54068be36 RDX: ffff954004934000 RSI: 0000000000000001 RDI: ffff954054494128 RBP: 0000000000000023 R08: ffff954001be2c20 R09: 0000000000000001 R10: ffff954001be2c20 R11: ffff9540260133c0 R12: 0000000000000000 R13: 0000000000000023 R14: 0000000000000000 R15: ffff9540ffcb0905 FS: 0000000000000000(0000) GS:ffff9540ffc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010625c001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_ib_gsi_pkey_change+0x20/0x40 [mlx5_ib] process_one_work+0x1e8/0x3c0 worker_thread+0x50/0x3b0 ? rescuer_thread+0x380/0x380 kthread+0x149/0x170 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) mlx5_fwctl(OE) fwctl(OE) ib_uverbs(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlx_compat(OE) psample mlxfw(OE) tls knem(OE) netconsole nfsv3 nfs_acl nfs lockd grace fscache netfs qrtr rfkill sunrpc intel_rapl_msr intel_rapl_common rapl hv_balloon hv_utils i2c_piix4 pcspkr joydev fuse ext4 mbcache jbd2 sr_mod sd_mod cdrom t10_pi sg ata_generic pci_hyperv pci_hyperv_intf hyperv_drm drm_shmem_helper drm_kms_helper hv_storvsc syscopyarea hv_netvsc sysfillrect sysimgblt hid_hyperv fb_sys_fops scsi_transport_fc hyperv_keyboard drm ata_piix crct10dif_pclmul crc32_pclmul crc32c_intel libata ghash_clmulni_intel hv_vmbus serio_raw [last unloaded: ib_core] CR2: 0000000000000000 ---[ end trace f6f8be4eae12f7bc ]---

In the Linux kernel, the following vulnerability has been resolved: ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce() ethtool_set_coalesce() now uses both the .get_coalesce() and .set_coalesce() callbacks. But the check for their availability is buggy, so changing the coalesce settings on a device where the driver provides only _one_ of the callbacks results in a NULL pointer dereference instead of an -EOPNOTSUPP. Fix the condition so that the availability of both callbacks is ensured. This also matches the netlink code. Note that reproducing this requires some effort - it only affects the legacy ioctl path, and needs a specific combination of driver options: - have .get_coalesce() and .coalesce_supported but no .set_coalesce(), or - have .set_coalesce() but no .get_coalesce(). Here eg. ethtool doesn't cause the crash as it first attempts to call ethtool_get_coalesce() and bails out on error.

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool() Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization") introduced a write barrier in probe function to store global '__scm' variable. We all known barriers are paired (see memory-barriers.txt: "Note that write barriers should normally be paired with read or address-dependency barriers"), therefore accessing it from concurrent contexts requires read barrier. Previous commit added such barrier in qcom_scm_is_available(), so let's use that directly. Lack of this read barrier can result in fetching stale '__scm' variable value, NULL, and dereferencing it. Note that barrier in qcom_scm_is_available() satisfies here the control dependency.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: int3472: Check for adev == NULL Not all devices have an ACPI companion fwnode, so adev might be NULL. This can e.g. (theoretically) happen when a user manually binds one of the int3472 drivers to another i2c/platform device through sysfs. Add a check for adev not being set and return -ENODEV in that case to avoid a possible NULL pointer deref in skl_int3472_get_acpi_buffer().

In the Linux kernel, the following vulnerability has been resolved: clk: mmp: pxa1908-mpmu: Fix a NULL vs IS_ERR() check The devm_kzalloc() function returns NULL on error, not error pointers. Update the check to match.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix NULL pointer dereference on certain command aborts If a command is queued to the final usable TRB of a ring segment, the enqueue pointer is advanced to the subsequent link TRB and no further. If the command is later aborted, when the abort completion is handled the dequeue pointer is advanced to the first TRB of the next segment. If no further commands are queued, xhci_handle_stopped_cmd_ring() sees the ring pointers unequal and assumes that there is a pending command, so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL. Don't attempt timer setup if cur_cmd is NULL. The subsequent doorbell ring likely is unnecessary too, but it's harmless. Leave it alone. This is probably Bug 219532, but no confirmation has been received. The issue has been independently reproduced and confirmed fixed using a USB MCU programmed to NAK the Status stage of SET_ADDRESS forever. Everything continued working normally after several prevented crashes.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-sm6350: Add missing parent_map for two clocks If a clk_rcg2 has a parent, it should also have parent_map defined, otherwise we'll get a NULL pointer dereference when calling clk_set_rate like the following: [ 3.388105] Call trace: [ 3.390664] qcom_find_src_index+0x3c/0x70 (P) [ 3.395301] qcom_find_src_index+0x1c/0x70 (L) [ 3.399934] _freq_tbl_determine_rate+0x48/0x100 [ 3.404753] clk_rcg2_determine_rate+0x1c/0x28 [ 3.409387] clk_core_determine_round_nolock+0x58/0xe4 [ 3.421414] clk_core_round_rate_nolock+0x48/0xfc [ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc [ 3.444483] clk_core_set_rate_nolock+0x8c/0x300 [ 3.455886] clk_set_rate+0x38/0x14c Add the parent_map property for two clocks where it's missing and also un-inline the parent_data as well to keep the matching parent_map and parent_data together.

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Add NULL check in mt_input_configured devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt_input_configured() is not checked. Add NULL check in mt_input_configured(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp Similar to the r_pipe sspp protect, add a check to protect the pipe state prints to avoid NULL ptr dereference for cases when the state is dumped without a corresponding atomic_check() where the pipe->sspp is assigned. Patchwork: https://patchwork.freedesktop.org/patch/628404/

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: avoid NULL pointer dereference When iterating over the links of a vif, we need to make sure that the pointer is valid (in other words - that the link exists) before dereferncing it. Use for_each_vif_active_link that also does the check.

In the Linux kernel, the following vulnerability has been resolved: clk: mmp: pxa1908-apbcp: Fix a NULL vs IS_ERR() check The devm_kzalloc() function doesn't return error pointers, it returns NULL on error. Update the check to match.

In the Linux kernel, the following vulnerability has been resolved: nfs: Fix oops in nfs_netfs_init_request() when copying to cache When netfslib wants to copy some data that has just been read on behalf of nfs, it creates a new write request and calls nfs_netfs_init_request() to initialise it, but with a NULL file pointer. This causes nfs_file_open_context() to oops - however, we don't actually need the nfs context as we're only going to write to the cache. Fix this by just returning if we aren't given a file pointer and emit a warning if the request was for something other than copy-to-cache. Further, fix nfs_netfs_free_request() so that it doesn't try to free the context if the pointer is NULL.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix NULL pointer dereference in capture_engine When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info(). (cherry picked from commit 754302a5bc1bd8fd3b7d85c168b0a1af6d4bba4d)

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: coex: check NULL return of kmalloc in btc_fw_set_monreg() kmalloc may fail, return value might be NULL and will cause NULL pointer dereference. Add check NULL return of kmalloc in btc_fw_set_monreg().

In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc() kunit_kzalloc() may return a NULL pointer, dereferencing it without NULL check may lead to NULL dereference. Add NULL checks for all the kunit_kzalloc() in sound_kunit.c

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: avoid NULL pointer error during sdio remove When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON is set to yes, kernel panic will happen: Call trace: destroy_workqueue+0x1c/0x258 ath10k_sdio_remove+0x84/0x94 sdio_bus_remove+0x50/0x16c device_release_driver_internal+0x188/0x25c device_driver_detach+0x20/0x2c This is because during 'rmmod ath10k', ath10k_sdio_remove() will call ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release() will finally be called in ath10k_core_destroy(). This function will free struct cfg80211_registered_device *rdev and all its members, including wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON. After device release, destroy_workqueue() will use NULL pointer then the kernel panic happen. Call trace: ath10k_sdio_remove ->ath10k_core_unregister …… ->ath10k_core_stop ->ath10k_hif_stop ->ath10k_sdio_irq_disable ->ath10k_hif_power_down ->del_timer_sync(&ar_sdio->sleep_timer) ->ath10k_core_destroy ->ath10k_mac_destroy ->ieee80211_free_hw ->wiphy_free …… ->wiphy_dev_release ->destroy_workqueue Need to call destroy_workqueue() before ath10k_core_destroy(), free the work queue buffer first and then free pointer of work queue by ath10k_core_destroy(). This order matches the error path order in ath10k_sdio_probe(). No work will be queued on sdio workqueue between it is destroyed and ath10k_core_destroy() is called. Based on the call_stack above, the reason is: Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and ath10k_sdio_irq_disable() will queue work on sdio workqueue. Sleep timer will be deleted before ath10k_core_destroy() in ath10k_hif_power_down(). ath10k_sdio_irq_disable() only be called in ath10k_hif_stop(). ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif bus, so ath10k_sdio_hif_tx_sg() won't be called anymore. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189