In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Update intermediate power state for SI Update the current state as boot state during dpm initialization. During the subsequent initialization, set_power_state gets called to transition to the final power state. set_power_state refers to values from the current state and without current state populated, it could result in NULL pointer dereference. For ex: on platforms where PCI speed change is supported through ACPI ATCS method, the link speed of current state needs to be queried before deciding on changing to final power state's link speed. The logic to query ATCS-support was broken on certain platforms. The issue became visible when broken ATCS-support logic got fixed with commit f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)"). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698

In the Linux kernel, the following vulnerability has been resolved: ACPI: scan: Fix a memory leak in an error handling path If 'acpi_device_set_name()' fails, we must free 'acpi_device_bus_id->bus_id' or there is a (potential) memory leak.

In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix a memory leak in error handling paths If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be updated and 'hv_uio_cleanup()' in the error handling path will not be able to free the corresponding buffer. In such a case, we need to free the buffer explicitly.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Do not enable irqs when handling spurious interrups We triggered the following error while running our 4.19 kernel with the pseudo-NMI patches backported to it: [ 14.816231] ------------[ cut here ]------------ [ 14.816231] kernel BUG at irq.c:99! [ 14.816232] Internal error: Oops - BUG: 0 [#1] SMP [ 14.816232] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____)) [ 14.816233] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.19.95.aarch64 #14 [ 14.816233] Hardware name: evb (DT) [ 14.816234] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 14.816234] pc : asm_nmi_enter+0x94/0x98 [ 14.816235] lr : asm_nmi_enter+0x18/0x98 [ 14.816235] sp : ffff000008003c50 [ 14.816235] pmr_save: 00000070 [ 14.816237] x29: ffff000008003c50 x28: ffff0000095f56c0 [ 14.816238] x27: 0000000000000000 x26: ffff000008004000 [ 14.816239] x25: 00000000015e0000 x24: ffff8008fb916000 [ 14.816240] x23: 0000000020400005 x22: ffff0000080817cc [ 14.816241] x21: ffff000008003da0 x20: 0000000000000060 [ 14.816242] x19: 00000000000003ff x18: ffffffffffffffff [ 14.816243] x17: 0000000000000008 x16: 003d090000000000 [ 14.816244] x15: ffff0000095ea6c8 x14: ffff8008fff5ab40 [ 14.816244] x13: ffff8008fff58b9d x12: 0000000000000000 [ 14.816245] x11: ffff000008c8a200 x10: 000000008e31fca5 [ 14.816246] x9 : ffff000008c8a208 x8 : 000000000000000f [ 14.816247] x7 : 0000000000000004 x6 : ffff8008fff58b9e [ 14.816248] x5 : 0000000000000000 x4 : 0000000080000000 [ 14.816249] x3 : 0000000000000000 x2 : 0000000080000000 [ 14.816250] x1 : 0000000000120000 x0 : ffff0000095f56c0 [ 14.816251] Call trace: [ 14.816251] asm_nmi_enter+0x94/0x98 [ 14.816251] el1_irq+0x8c/0x180 (IRQ C) [ 14.816252] gic_handle_irq+0xbc/0x2e4 [ 14.816252] el1_irq+0xcc/0x180 (IRQ B) [ 14.816253] arch_timer_handler_virt+0x38/0x58 [ 14.816253] handle_percpu_devid_irq+0x90/0x240 [ 14.816253] generic_handle_irq+0x34/0x50 [ 14.816254] __handle_domain_irq+0x68/0xc0 [ 14.816254] gic_handle_irq+0xf8/0x2e4 [ 14.816255] el1_irq+0xcc/0x180 (IRQ A) [ 14.816255] arch_cpu_idle+0x34/0x1c8 [ 14.816255] default_idle_call+0x24/0x44 [ 14.816256] do_idle+0x1d0/0x2c8 [ 14.816256] cpu_startup_entry+0x28/0x30 [ 14.816256] rest_init+0xb8/0xc8 [ 14.816257] start_kernel+0x4c8/0x4f4 [ 14.816257] Code: 940587f1 d5384100 b9401001 36a7fd01 (d4210000) [ 14.816258] Modules linked in: start_dp(O) smeth(O) [ 15.103092] ---[ end trace 701753956cb14aa8 ]--- [ 15.103093] Kernel panic - not syncing: Fatal exception in interrupt [ 15.103099] SMP: stopping secondary CPUs [ 15.103100] Kernel Offset: disabled [ 15.103100] CPU features: 0x36,a2400218 [ 15.103100] Memory Limit: none which is cause by a 'BUG_ON(in_nmi())' in nmi_enter(). From the call trace, we can find three interrupts (noted A, B, C above): interrupt (A) is preempted by (B), which is further interrupted by (C). Subsequent investigations show that (B) results in nmi_enter() being called, but that it actually is a spurious interrupt. Furthermore, interrupts are reenabled in the context of (B), and (C) fires with NMI priority. We end-up with a nested NMI situation, something we definitely do not want to (and cannot) handle. The bug here is that spurious interrupts should never result in any state change, and we should just return to the interrupted context. Moving the handling of spurious interrupts as early as possible in the GICv3 handler fixes this issue. [maz: rewrote commit message, corrected Fixes: tag]

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: nullify cq->dbg pointer in mlx5_debug_cq_remove() Prior to this patch in case mlx5_core_destroy_cq() failed it proceeds to rest of destroy operations. mlx5_core_destroy_cq() could be called again by user and cause additional call of mlx5_debug_cq_remove(). cq->dbg was not nullify in previous call and cause the crash. Fix it by nullify cq->dbg pointer after removal. Also proceed to destroy operations only if FW return 0 for MLX5_CMD_OP_DESTROY_CQ command. general protection fault, probably for non-canonical address 0x2000300004058: 0000 [#1] SMP PTI CPU: 5 PID: 1228 Comm: python Not tainted 5.15.0-rc5_for_upstream_min_debug_2021_10_14_11_06 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:lockref_get+0x1/0x60 Code: 5d e9 53 ff ff ff 48 8d 7f 70 e8 0a 2e 48 00 c7 85 d0 00 00 00 02 00 00 00 c6 45 70 00 fb 5d c3 c3 cc cc cc cc cc cc cc cc 53 <48> 8b 17 48 89 fb 85 d2 75 3d 48 89 d0 bf 64 00 00 00 48 89 c1 48 RSP: 0018:ffff888137dd7a38 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff888107d5f458 RCX: 00000000fffffffe RDX: 000000000002c2b0 RSI: ffffffff8155e2e0 RDI: 0002000300004058 RBP: ffff888137dd7a88 R08: 0002000300004058 R09: ffff8881144a9f88 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881141d4000 R13: ffff888137dd7c68 R14: ffff888137dd7d58 R15: ffff888137dd7cc0 FS: 00007f4644f2a4c0(0000) GS:ffff8887a2d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b4500f4380 CR3: 0000000114f7a003 CR4: 0000000000170ea0 Call Trace: simple_recursive_removal+0x33/0x2e0 ? debugfs_remove+0x60/0x60 debugfs_remove+0x40/0x60 mlx5_debug_cq_remove+0x32/0x70 [mlx5_core] mlx5_core_destroy_cq+0x41/0x1d0 [mlx5_core] devx_obj_cleanup+0x151/0x330 [mlx5_ib] ? __pollwait+0xd0/0xd0 ? xas_load+0x5/0x70 ? xa_load+0x62/0xa0 destroy_hw_idr_uobject+0x20/0x80 [ib_uverbs] uverbs_destroy_uobject+0x3b/0x360 [ib_uverbs] uobj_destroy+0x54/0xa0 [ib_uverbs] ib_uverbs_cmd_verbs+0xaf2/0x1160 [ib_uverbs] ? uverbs_finalize_object+0xd0/0xd0 [ib_uverbs] ib_uverbs_ioctl+0xc4/0x1b0 [ib_uverbs] __x64_sys_ioctl+0x3e4/0x8e0

In the Linux kernel, the following vulnerability has been resolved: usb: mtu3: fix list_head check warning This is caused by uninitialization of list_head. BUG: KASAN: use-after-free in __list_del_entry_valid+0x34/0xe4 Call trace: dump_backtrace+0x0/0x298 show_stack+0x24/0x34 dump_stack+0x130/0x1a8 print_address_description+0x88/0x56c __kasan_report+0x1b8/0x2a0 kasan_report+0x14/0x20 __asan_load8+0x9c/0xa0 __list_del_entry_valid+0x34/0xe4 mtu3_req_complete+0x4c/0x300 [mtu3] mtu3_gadget_stop+0x168/0x448 [mtu3] usb_gadget_unregister_driver+0x204/0x3a0 unregister_gadget_item+0x44/0xa4

In the Linux kernel, the following vulnerability has been resolved: powerpc/64: Fix the definition of the fixmap area At the time being, the fixmap area is defined at the top of the address space or just below KASAN. This definition is not valid for PPC64. For PPC64, use the top of the I/O space. Because of circular dependencies, it is not possible to include asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size AREA at the top of the I/O space for fixmap and ensure during build that the size is big enough.

In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler module Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandl ---truncated---

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Prevent dead task groups from regaining cfs_rq's Kevin is reporting crashes which point to a use-after-free of a cfs_rq in update_blocked_averages(). Initial debugging revealed that we've live cfs_rq's (on_list=1) in an about to be kfree()'d task group in free_fair_sched_group(). However, it was unclear how that can happen. His kernel config happened to lead to a layout of struct sched_entity that put the 'my_q' member directly into the middle of the object which makes it incidentally overlap with SLUB's freelist pointer. That, in combination with SLAB_FREELIST_HARDENED's freelist pointer mangling, leads to a reliable access violation in form of a #GP which made the UAF fail fast. Michal seems to have run into the same issue[1]. He already correctly diagnosed that commit a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") is causing the preconditions for the UAF to happen by re-adding cfs_rq's also to task groups that have no more running tasks, i.e. also to dead ones. His analysis, however, misses the real root cause and it cannot be seen from the crash backtrace only, as the real offender is tg_unthrottle_up() getting called via sched_cfs_period_timer() via the timer interrupt at an inconvenient time. When unregister_fair_sched_group() unlinks all cfs_rq's from the dying task group, it doesn't protect itself from getting interrupted. If the timer interrupt triggers while we iterate over all CPUs or after unregister_fair_sched_group() has finished but prior to unlinking the task group, sched_cfs_period_timer() will execute and walk the list of task groups, trying to unthrottle cfs_rq's, i.e. re-add them to the dying task group. These will later -- in free_fair_sched_group() -- be kfree()'ed while still being linked, leading to the fireworks Kevin and Michal are seeing. To fix this race, ensure the dying task group gets unlinked first. However, simply switching the order of unregistering and unlinking the task group isn't sufficient, as concurrent RCU walkers might still see it, as can be seen below: CPU1: CPU2: : timer IRQ: : do_sched_cfs_period_timer(): : : : distribute_cfs_runtime(): : rcu_read_lock(); : : : unthrottle_cfs_rq(): sched_offline_group(): : : walk_tg_tree_from(…,tg_unthrottle_up,…): list_del_rcu(&tg->list); : (1) : list_for_each_entry_rcu(child, &parent->children, siblings) : : (2) list_del_rcu(&tg->siblings); : : tg_unthrottle_up(): unregister_fair_sched_group(): struct cfs_rq *cfs_rq = tg->cfs_rq[cpu_of(rq)]; : : list_del_leaf_cfs_rq(tg->cfs_rq[cpu]); : : : : if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running) (3) : list_add_leaf_cfs_rq(cfs_rq); : : : : : : : : : ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Remove WO permissions on second-level paging entries When the first level page table is used for IOVA translation, it only supports Read-Only and Read-Write permissions. The Write-Only permission is not supported as the PRESENT bit (implying Read permission) should always set. When using second level, we still give separate permissions that allows WriteOnly which seems inconsistent and awkward. We want to have consistent behavior. After moving to 1st level, we don't want things to work sometimes, and break if we use 2nd level for the same mappings. Hence remove this configuration.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix deadlock in AP/VLAN handling Syzbot reports that when you have AP_VLAN interfaces that are up and close the AP interface they belong to, we get a deadlock. No surprise - since we dev_close() them with the wiphy mutex held, which goes back into the netdev notifier in cfg80211 and tries to acquire the wiphy mutex there. To fix this, we need to do two things: 1) prevent changing iftype while AP_VLANs are up, we can't easily fix this case since cfg80211 already calls us with the wiphy mutex held, but change_interface() is relatively rare in drivers anyway, so changing iftype isn't used much (and userspace has to fall back to down/change/up anyway) 2) pull the dev_close() loop over VLANs out of the wiphy mutex section in the normal stop case

In the Linux kernel, the following vulnerability has been resolved: userfaultfd: release page in error path to avoid BUG_ON Consider the following sequence of events: 1. Userspace issues a UFFD ioctl, which ends up calling into shmem_mfill_atomic_pte(). We successfully account the blocks, we shmem_alloc_page(), but then the copy_from_user() fails. We return -ENOENT. We don't release the page we allocated. 2. Our caller detects this error code, tries the copy_from_user() after dropping the mmap_lock, and retries, calling back into shmem_mfill_atomic_pte(). 3. Meanwhile, let's say another process filled up the tmpfs being used. 4. So shmem_mfill_atomic_pte() fails to account blocks this time, and immediately returns - without releasing the page. This triggers a BUG_ON in our caller, which asserts that the page should always be consumed, unless -ENOENT is returned. To fix this, detect if we have such a "dangling" page when accounting fails, and if so, release it before returning.

In the Linux kernel, the following vulnerability has been resolved: USB: usbfs: Don't WARN about excessively large memory allocations Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel; it's merely an invalid request from the user and the usbfs code does handle it correctly. In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers. To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers.

In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: Fix NULL pointer dereference in ->remove() drvdata has to be set in _probe() - otherwise platform_get_drvdata() causes null pointer dereference BUG in _remove().

In the Linux kernel, the following vulnerability has been resolved: phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init() Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix some resource leaks.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst null pointer dereference This patch fixes a tunnel_dst null pointer dereference due to lockless access in the tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking. Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked in the egress path.

In the Linux kernel, the following vulnerability has been resolved: ARM: davinci: da850-evm: Avoid NULL pointer dereference With newer versions of GCC, there is a panic in da850_evm_config_emac() when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine: Unable to handle kernel NULL pointer dereference at virtual address 00000020 pgd = (ptrval) [00000020] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1 Hardware name: Generic DT based system PC is at da850_evm_config_emac+0x1c/0x120 LR is at do_one_initcall+0x50/0x1e0 The emac_pdata pointer in soc_info is NULL because davinci_soc_info only gets populated on davinci machines but da850_evm_config_emac() is called on all machines via device_initcall(). Move the rmii_en assignment below the machine check so that it is only dereferenced when running on a supported SoC.

In the Linux kernel, the following vulnerability has been resolved: net: caif: fix memory leak in caif_device_notify In case of caif_enroll_dev() fail, allocated link_support won't be assigned to the corresponding structure. So simply free allocated pointer in case of error

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: explicitly clear ioctl input data As seen from a recent syzbot bug report, mistakes in the compat ioctl implementation can lead to uninitialized kernel stack data getting used as input for driver ioctl handlers. The reported bug is now fixed, but it's possible that other related bugs are still present or get added in the future. As the drivers need to check user input already, the possible impact is fairly low, but it might still cause an information leak. To be on the safe side, always clear the entire ioctl buffer before calling the conversion handler functions that are meant to initialize them.

In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove When ACPI type is ACPI_SMO8500, the data->dready_trig will not be set, the memory allocated by iio_triggered_buffer_setup() will not be freed, and cause memory leak as follows: unreferenced object 0xffff888009551400 (size 512): comm "i2c-SMO8500-125", pid 911, jiffies 4294911787 (age 83.852s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 20 e2 e5 c0 ff ff ff ff ........ ....... backtrace: [<0000000041ce75ee>] kmem_cache_alloc_trace+0x16d/0x360 [<000000000aeb17b0>] iio_kfifo_allocate+0x41/0x130 [kfifo_buf] [<000000004b40c1f5>] iio_triggered_buffer_setup_ext+0x2c/0x210 [industrialio_triggered_buffer] [<000000004375b15f>] kxcjk1013_probe+0x10c3/0x1d81 [kxcjk_1013] Fix it by remove data->dready_trig condition in probe and remove.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix a memleak bug in rvu_mbox_init() In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: net: caif: fix memory leak in cfusbl_device_notify In case of caif_enroll_dev() fail, allocated link_support won't be assigned to the corresponding structure. So simply free allocated pointer in case of error.

In the Linux kernel, the following vulnerability has been resolved: media: staging/intel-ipu3: Fix memory leak in imu_fmt We are losing the reference to an allocated memory if try. Change the order of the check to avoid that.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_read_fifo: fix memory leak in error branch In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details.

In the Linux kernel, the following vulnerability has been resolved: gve: Add NULL pointer checks when freeing irqs. When freeing notification blocks, we index priv->msix_vectors. If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors) this could lead to a NULL pointer dereference if the driver is unloaded.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails The spi controller supports 44-bit address space on AXI in DMA mode, so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping. In addition, if dma_map_single fails, it should return immediately instead of continuing doing the DMA operation which bases on invalid address. This fixes the following crash which occurs in reading a big block from flash: [ 123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots) [ 123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped [ 123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0 [ 123.792536] Mem abort info: [ 123.795313] ESR = 0x96000145 [ 123.798351] EC = 0x25: DABT (current EL), IL = 32 bits [ 123.803655] SET = 0, FnV = 0 [ 123.806693] EA = 0, S1PTW = 0 [ 123.809818] Data abort info: [ 123.812683] ISV = 0, ISS = 0x00000145 [ 123.816503] CM = 1, WnR = 1 [ 123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000 [ 123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000 [ 123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP

In the Linux kernel, the following vulnerability has been resolved: mm/slub: actually fix freelist pointer vs redzoning It turns out that SLUB redzoning ("slub_debug=Z") checks from s->object_size rather than from s->inuse (which is normally bumped to make room for the freelist pointer), so a cache created with an object size less than 24 would have the freelist pointer written beyond s->object_size, causing the redzone to be corrupted by the freelist pointer. This was very visible with "slub_debug=ZF": BUG test (Tainted: G B ): Right Redzone overwritten ----------------------------------------------------------------------------- INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200 INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620 Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........ Object (____ptrval____): 00 00 00 00 00 f6 f4 a5 ........ Redzone (____ptrval____): 40 1d e8 1a aa @.... Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........ Adjust the offset to stay within s->object_size. (Note that no caches of in this size range are known to exist in the kernel currently.)

In the Linux kernel, the following vulnerability has been resolved: memory: renesas-rpc-if: fix possible NULL pointer dereference of resource The platform_get_resource_byname() can return NULL which would be immediately dereferenced by resource_size(). Instead dereference it after validating the resource. Addresses-Coverity: Dereference null return value

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear. ffs_data_clear is indirectly called from both ffs_fs_kill_sb and ffs_ep0_release, so it ends up being called twice when userland closes ep0 and then unmounts f_fs. If userland provided an eventfd along with function's USB descriptors, it ends up calling eventfd_ctx_put as many times, causing a refcount underflow. NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls. Also, set epfiles to NULL right after de-allocating it, for readability. For completeness, ffs_data_clear actually ends up being called thrice, the last call being before the whole ffs structure gets freed, so when this specific sequence happens there is a second underflow happening (but not being reported): /sys/kernel/debug/tracing# modprobe usb_f_fs /sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter /sys/kernel/debug/tracing# echo function > current_tracer /sys/kernel/debug/tracing# echo 1 > tracing_on (setup gadget, run and kill function userland process, teardown gadget) /sys/kernel/debug/tracing# echo 0 > tracing_on /sys/kernel/debug/tracing# cat trace smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put Warning output corresponding to above trace: [ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c [ 1946.293094] refcount_t: underflow; use-after-free. [ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E) [ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1 [ 1946.417950] Hardware name: BCM2835 [ 1946.425442] Backtrace: [ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24) [ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c [ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30) [ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154) [ 1946.482067] r5:c04a948c r4:c0a71dc8 [ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4) [ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04 [ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c) [ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0 [ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74) [ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs]) [ 1946.582664] r5:c3b84c00 r4:c2695b00 [ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs]) [ 1946.609608] r5:bf54d014 r4:c2695b00 [ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs]) [ 1946.636217] r7:c0dfcb ---truncated---

In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Teardown PV features on boot CPU as well Various PV features (Async PF, PV EOI, steal time) work through memory shared with hypervisor and when we restore from hibernation we must properly teardown all these features to make sure hypervisor doesn't write to stale locations after we jump to the previously hibernated kernel (which can try to place anything there). For secondary CPUs the job is already done by kvm_cpu_down_prepare(), register syscore ops to do the same for boot CPU.

A flaw was found in the Linux kernel. The existing KVM SEV API has a vulnerability that allows a non-root (host) user-level application to crash the host kernel by creating a confidential guest VM instance in AMD CPU that supports Secure Encrypted Virtualization (SEV).

In the Linux kernel, the following vulnerability has been resolved: spi: fix use-after-free of the add_lock mutex Commit 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses") introduced a per-controller mutex. But mutex_unlock() of said lock is called after the controller is already freed: spi_unregister_controller(ctlr) -> put_device(&ctlr->dev) -> spi_controller_release(dev) -> mutex_unlock(&ctrl->add_lock) Move the put_device() after the mutex_unlock().

In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Added the condition for scheduling ksz_mib_read_work When the ksz module is installed and removed using rmmod, kernel crashes with null pointer dereferrence error. During rmmod, ksz_switch_remove function tries to cancel the mib_read_workqueue using cancel_delayed_work_sync routine and unregister switch from dsa. During dsa_unregister_switch it calls ksz_mac_link_down, which in turn reschedules the workqueue since mib_interval is non-zero. Due to which queue executed after mib_interval and it tries to access dp->slave. But the slave is unregistered in the ksz_switch_remove function. Hence kernel crashes. To avoid this crash, before canceling the workqueue, resetted the mib_interval to 0. v1 -> v2: -Removed the if condition in ksz_mib_read_work

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix scsi_mode_sense() buffer length handling Several problems exist with scsi_mode_sense() buffer length handling: 1) The allocation length field of the MODE SENSE(10) command is 16-bits, occupying bytes 7 and 8 of the CDB. With this command, access to mode pages larger than 255 bytes is thus possible. However, the CDB allocation length field is set by assigning len to byte 8 only, thus truncating buffer length larger than 255. 2) If scsi_mode_sense() is called with len smaller than 8 with sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length is increased to 8 and 4 respectively, and the buffer is zero filled with these increased values, thus corrupting the memory following the buffer. Fix these 2 problems by using put_unaligned_be16() to set the allocation length field of MODE SENSE(10) CDB and by returning an error when len is too small. Furthermore, if len is larger than 255B, always try MODE SENSE(10) first, even if the device driver did not set sdev->use_10_for_ms. In case of invalid opcode error for MODE SENSE(10), access to mode pages larger than 255 bytes are not retried using MODE SENSE(6). To avoid buffer length overflows for the MODE_SENSE(10) case, check that len is smaller than 65535 bytes. While at it, also fix the folowing: * Use get_unaligned_be16() to retrieve the mode data length and block descriptor length fields of the mode sense reply header instead of using an open coded calculation. * Fix the kdoc dbd argument explanation: the DBD bit stands for Disable Block Descriptor, which is the opposite of what the dbd argument description was.

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in netlbl_cipsov4_add_std Reported by syzkaller: BUG: memory leak unreferenced object 0xffff888105df7000 (size 64): comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline] [<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline] [<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline] [<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416 [<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739 [<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800 [<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 [<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae The memory of doi_def->map.std pointing is allocated in netlbl_cipsov4_add_std, but no place has freed it. It should be freed in cipso_v4_doi_free which frees the cipso DOI resource.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Free gadget structure only after freeing endpoints As part of commit e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") the dwc3_gadget_release() was added which will free the dwc->gadget structure upon the device's removal when usb_del_gadget_udc() is called in dwc3_gadget_exit(). However, simply freeing the gadget results a dangling pointer situation: the endpoints created in dwc3_gadget_init_endpoints() have their dep->endpoint.ep_list members chained off the list_head anchored at dwc->gadget->ep_list. Thus when dwc->gadget is freed, the first dwc3_ep in the list now has a dangling prev pointer and likewise for the next pointer of the dwc3_ep at the tail of the list. The dwc3_gadget_free_endpoints() that follows will result in a use-after-free when it calls list_del(). This was caught by enabling KASAN and performing a driver unbind. The recent commit 568262bf5492 ("usb: dwc3: core: Add shutdown callback for dwc3") also exposes this as a panic during shutdown. There are a few possibilities to fix this. One could be to perform a list_del() of the gadget->ep_list itself which removes it from the rest of the dwc3_ep chain. Another approach is what this patch does, by splitting up the usb_del_gadget_udc() call into its separate "del" and "put" components. This allows dwc3_gadget_free_endpoints() to be called before the gadget is finally freed with usb_put_gadget().

In the Linux kernel, the following vulnerability has been resolved: mptcp: clear 'kern' flag from fallback sockets The mptcp ULP extension relies on sk->sk_sock_kern being set correctly: It prevents setsockopt(fd, IPPROTO_TCP, TCP_ULP, "mptcp", 6); from working for plain tcp sockets (any userspace-exposed socket). But in case of fallback, accept() can return a plain tcp sk. In such case, sk is still tagged as 'kernel' and setsockopt will work. This will crash the kernel, The subflow extension has a NULL ctx->conn mptcp socket: BUG: KASAN: null-ptr-deref in subflow_data_ready+0x181/0x2b0 Call Trace: tcp_data_ready+0xf8/0x370 [..]

In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: fix null deref in parse dev addr Fix a logic error that could result in a null deref if the user sets the mode incorrectly for the given addr type.

A flaw was found in the sctp_make_strreset_req function in net/sctp/sm_make_chunk.c in the SCTP network protocol in the Linux kernel with a local user privilege access. In this flaw, an attempt to use more buffer than is allocated triggers a BUG_ON issue, leading to a denial of service (DOS).

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix a resource leak in an error handling path 'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the error handling path of the probe function, as already done in the remove function

In the Linux kernel, the following vulnerability has been resolved: net: systemport: Add global locking for descriptor lifecycle The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used.

In the Linux kernel, the following vulnerability has been resolved: samples/landlock: Fix path_list memory leak Clang static analysis reports this error sandboxer.c:134:8: warning: Potential leak of memory pointed to by 'path_list' ret = 0; ^ path_list is allocated in parse_path() but never freed.

In the Linux kernel, the following vulnerability has been resolved: nfp: Fix memory leak in nfp_cpp_area_cache_add() In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a CPP area structure. But in line 807 (#2), when the cache is allocated failed, this CPP area structure is not freed, which will result in memory leak. We can fix it by freeing the CPP area when the cache is allocated failed (#2). 792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size) 793 { 794 struct nfp_cpp_area_cache *cache; 795 struct nfp_cpp_area *area; 800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0), 801 0, size); // #1: allocates and initializes 802 if (!area) 803 return -ENOMEM; 805 cache = kzalloc(sizeof(*cache), GFP_KERNEL); 806 if (!cache) 807 return -ENOMEM; // #2: missing free 817 return 0; 818 }

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/debugfs: fix file release memory leak When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked.

In the Linux kernel, the following vulnerability has been resolved: gpio: wcd934x: Fix shift-out-of-bounds error bit-mask for pins 0 to 4 is BIT(0) to BIT(4) however we ended up with BIT(n - 1) which is not right, and this was caught by below usban check UBSAN: shift-out-of-bounds in drivers/gpio/gpio-wcd934x.c:34:14

In the Linux kernel, the following vulnerability has been resolved: cifs: Return correct error code from smb2_get_enc_key Avoid a warning if the error percolates back up: [440700.376476] CIFS VFS: \\otters.example.com crypt_message: Could not get encryption key [440700.386947] ------------[ cut here ]------------ [440700.386948] err = 1 [440700.386977] WARNING: CPU: 11 PID: 2733 at /build/linux-hwe-5.4-p6lk6L/linux-hwe-5.4-5.4.0/lib/errseq.c:74 errseq_set+0x5c/0x70 ... [440700.397304] CPU: 11 PID: 2733 Comm: tar Tainted: G OE 5.4.0-70-generic #78~18.04.1-Ubuntu ... [440700.397334] Call Trace: [440700.397346] __filemap_set_wb_err+0x1a/0x70 [440700.397419] cifs_writepages+0x9c7/0xb30 [cifs] [440700.397426] do_writepages+0x4b/0xe0 [440700.397444] __filemap_fdatawrite_range+0xcb/0x100 [440700.397455] filemap_write_and_wait+0x42/0xa0 [440700.397486] cifs_setattr+0x68b/0xf30 [cifs] [440700.397493] notify_change+0x358/0x4a0 [440700.397500] utimes_common+0xe9/0x1c0 [440700.397510] do_utimes+0xc5/0x150 [440700.397520] __x64_sys_utimensat+0x88/0xd0

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs.

In the Linux kernel, the following vulnerability has been resolved: bpf, lockdown, audit: Fix buggy SELinux lockdown permission checks Commit 59438b46471a ("security,lockdown,selinux: implement SELinux lockdown") added an implementation of the locked_down LSM hook to SELinux, with the aim to restrict which domains are allowed to perform operations that would breach lockdown. This is indirectly also getting audit subsystem involved to report events. The latter is problematic, as reported by Ondrej and Serhei, since it can bring down the whole system via audit: 1) The audit events that are triggered due to calls to security_locked_down() can OOM kill a machine, see below details [0]. 2) It also seems to be causing a deadlock via avc_has_perm()/slow_avc_audit() when trying to wake up kauditd, for example, when using trace_sched_switch() tracepoint, see details in [1]. Triggering this was not via some hypothetical corner case, but with existing tools like runqlat & runqslower from bcc, for example, which make use of this tracepoint. Rough call sequence goes like: rq_lock(rq) -> -------------------------+ trace_sched_switch() -> | bpf_prog_xyz() -> +-> deadlock selinux_lockdown() -> | audit_log_end() -> | wake_up_interruptible() -> | try_to_wake_up() -> | rq_lock(rq) --------------+ What's worse is that the intention of 59438b46471a to further restrict lockdown settings for specific applications in respect to the global lockdown policy is completely broken for BPF. The SELinux policy rule for the current lockdown check looks something like this: allow <who> <who> : lockdown { <reason> }; However, this doesn't match with the 'current' task where the security_locked_down() is executed, example: httpd does a syscall. There is a tracing program attached to the syscall which triggers a BPF program to run, which ends up doing a bpf_probe_read_kernel{,_str}() helper call. The selinux_lockdown() hook does the permission check against 'current', that is, httpd in this example. httpd has literally zero relation to this tracing program, and it would be nonsensical having to write an SELinux policy rule against httpd to let the tracing helper pass. The policy in this case needs to be against the entity that is installing the BPF program. For example, if bpftrace would generate a histogram of syscall counts by user space application: bpftrace -e 'tracepoint:raw_syscalls:sys_enter { @[comm] = count(); }' bpftrace would then go and generate a BPF program from this internally. One way of doing it [for the sake of the example] could be to call bpf_get_current_task() helper and then access current->comm via one of bpf_probe_read_kernel{,_str}() helpers. So the program itself has nothing to do with httpd or any other random app doing a syscall here. The BPF program _explicitly initiated_ the lockdown check. The allow/deny policy belongs in the context of bpftrace: meaning, you want to grant bpftrace access to use these helpers, but other tracers on the system like my_random_tracer _not_. Therefore fix all three issues at the same time by taking a completely different approach for the security_locked_down() hook, that is, move the check into the program verification phase where we actually retrieve the BPF func proto. This also reliably gets the task (current) that is trying to install the BPF tracing program, e.g. bpftrace/bcc/perf/systemtap/etc, and it also fixes the OOM since we're moving this out of the BPF helper's fast-path which can be called several millions of times per second. The check is then also in line with other security_locked_down() hooks in the system where the enforcement is performed at open/load time, for example, open_kcore() for /proc/kcore access or module_sig_check() for module signatures just to pick f ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: staging: media: zoran: move videodev alloc Move some code out of zr36057_init() and create new functions for handling zr->video_dev. This permit to ease code reading and fix a zr->video_dev memory leak.

In the Linux kernel, the following vulnerability has been resolved: ipmi: ssif: initialize ssif_info->client early During probe ssif_info->client is dereferenced in error path. However, it is set when some of the error checking has already been done. This causes following kernel crash if an error path is taken: [ 30.645593][ T674] ipmi_ssif 0-000e: ipmi_ssif: Not probing, Interface already present [ 30.657616][ T674] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 ... [ 30.657723][ T674] pc : __dev_printk+0x28/0xa0 [ 30.657732][ T674] lr : _dev_err+0x7c/0xa0 ... [ 30.657772][ T674] Call trace: [ 30.657775][ T674] __dev_printk+0x28/0xa0 [ 30.657778][ T674] _dev_err+0x7c/0xa0 [ 30.657781][ T674] ssif_probe+0x548/0x900 [ipmi_ssif 62ce4b08badc1458fd896206d9ef69a3c31f3d3e] [ 30.657791][ T674] i2c_device_probe+0x37c/0x3c0 ... Initialize ssif_info->client before any error path can be taken. Clear i2c_client data in the error path to prevent the dangling pointer from leaking.