IBM Security Verify Access Appliance 10.0.0 through 10.0.8 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000-40 V31R02B1413C and classified as critical. This issue affects some unknown processing of the file /useratte/resmanage.php. The manipulation of the argument load leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-264533 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

D-Link DNS-320 FW v2.06B01 Revision Ax is affected by command injection in the system_mgr.cgi component, which can lead to remote arbitrary code execution.

The package Snyk CLI before 1.1294.0 is vulnerable to Code Injection when scanning an untrusted PHP project. The vulnerability can be triggered if Snyk test is run inside the untrusted project due to the improper handling of the current working directory name. Snyk recommends only scanning trusted projects.

A vulnerability has been identified in InterMesh 7177 Hybrid 2.0 Subscriber (All versions < V8.2.12), InterMesh 7707 Fire Subscriber (All versions < V7.2.12 only if the IP interface is enabled (which is not the default configuration)). The web server of affected devices does not sanitize the input parameters in specific GET requests that allow for code execution on operating system level. In combination with other vulnerabilities (CVE-2024-47902, CVE-2024-47903, CVE-2024-47904) this could allow an unauthenticated remote attacker to execute arbitrary code with root privileges.

Logicytics is designed to harvest and collect data for forensic analysis. Logicytics has a basic vuln affecting compromised devices from shell injections. This vulnerability is fixed in 2.3.2.

In WhatsUp Gold versions released before 2023.1.3, an unauthenticated Remote Code Execution vulnerability in Progress WhatsUpGold.  The Apm.UI.Areas.APM.Controllers.CommunityController allows execution of commands with iisapppool\nmconsole privileges.

An OS command injection vulnerability has been reported to affect several product versions. If exploited, the vulnerability could allow remote attackers to execute commands. We have already fixed the vulnerability in the following version: QuRouter 2.4.3.103 and later

In WhatsUp Gold versions released before 2023.1.3, a Remote Code Execution issue exists in Progress WhatsUp Gold. This vulnerability allows an unauthenticated attacker to achieve the RCE as a service account through NmApi.exe.

A vulnerability classified as critical has been found in Ruijie RG-UAC up to 20240506. Affected is an unknown function of the file /view/networkConfig/physicalInterface/interface_commit.php. The manipulation of the argument name leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. VDB-263934 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability has been reported to affect License Center. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands. We have already fixed the vulnerability in the following version: License Center 1.9.43 and later

A vulnerability classified as critical was found in Ruijie RG-UAC up to 20240506. Affected by this vulnerability is an unknown functionality of the file /view/networkConfig/RouteConfig/StaticRoute/static_route_edit_commit.php. The manipulation of the argument oldipmask/oldgateway leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-263935. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240506. Affected by this issue is some unknown functionality of the file /view/bugSolve/viewData/detail.php. The manipulation of the argument filename leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263936. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Ruijie RG-UAC up to 20240506. This affects an unknown part of the file /view/networkConfig/GRE/gre_add_commit.php. The manipulation of the argument name/remote/local/IP leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-263937 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Sangfor Next-Gen Application Firewall version NGAF8.0.17 is vulnerable to an operating system command injection vulnerability. A remote and unauthenticated attacker can execute arbitrary commands by sending a crafted HTTP POST request to the /LogInOut.php endpoint. This is due to mishandling of shell meta-characters in the "un" parameter.

A OS Command Injection vulnerability was discovered in Artica Proxy 4.30.000000. Attackers can execute OS commands in cyrus.events.php with GET param logs and POST param rp.

A vulnerability was identified in Ruijie WS7204-A 2017.06.15. Affected by this vulnerability is an unknown functionality of the file /itbox_pi/branch_import.php?a=branch_list. Such manipulation of the argument province leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

TRENDnet TV-IP410 vA1.0R was discovered to contain an OS command injection vulnerability via the /server/cgi-bin/testserv.cgi component.

Sharetribe Go is a source available marketplace software. In affected versions operating system command injection is possible on installations of Sharetribe Go, that do not have a secret AWS Simple Notification Service (SNS) notification token configured via the `sns_notification_token` configuration parameter. This configuration parameter is unset by default. The vulnerability has been patched in version 10.2.1. Users who are unable to upgrade should set the`sns_notification_token` configuration parameter to a secret value.

The postjournal service in Zimbra Collaboration (ZCS) before 8.8.15 Patch 46, 9 before 9.0.0 Patch 41, 10 before 10.0.9, and 10.1 before 10.1.1 sometimes allows unauthenticated users to execute commands.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. We have already fixed this vulnerability in the following versions: QTS 4.5.2.1566 Build 20210202 and later QTS 4.5.1.1495 Build 20201123 and later QTS 4.3.6.1620 Build 20210322 and later QTS 4.3.4.1632 Build 20210324 and later QTS 4.3.3.1624 Build 20210416 and later QTS 4.2.6 Build 20210327 and later QuTS hero h4.5.1.1491 build 20201119 and later

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the Captcha field to Login.

There is a command injection vulnerability that may allow an attacker to inject malicious input on the device's operating system.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the command parameter in the setTracerouteCfg function.

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the PrivateLogin field to Login.

In TOTOLINK X6000R V9.4.0cu.1041_B20240224 in the shttpd file, the Uci_Set Str function is used without strict parameter filtering. An attacker can achieve arbitrary command execution by constructing the payload.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

A remote code execution vulnerability exists in the WebAdmin of Sophos SG UTM before v9.705 MR5, v9.607 MR7, and v9.511 MR11

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setWiFiWpsCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

Zumtobel Netlink CCD Onboard 3.74 - Firmware 3.80 was discovered to contain a command injection vulnerability via the NetHostname parameter.

ping.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping_IPAddr field of an HTTP POST request.

A security vulnerability has been detected in D-Link DIR-852 1.00CN B09. Impacted is the function soapcgi_main of the file soap.cgi of the component SOAP Service. Such manipulation of the argument service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

The administration console of the Moog EXO Series EXVF5C-2 and EXVP7C2-3 units features a 'statusbroadcast' command that can spawn a given process repeatedly at a certain time interval as 'root'. One of the limitations of this feature is that it only takes a path to a binary without arguments; however, this can be circumvented using special shell variables, such as '${IFS}'. As a result, an attacker can execute arbitrary commands as 'root' on the units.

A Python command injection vulnerability exists in the `SagemakerLLM` class's `complete()` method within `./private_gpt/components/llm/custom/sagemaker.py` of the imartinez/privategpt application, versions up to and including 0.3.0. The vulnerability arises due to the use of the `eval()` function to parse a string received from a remote AWS SageMaker LLM endpoint into a dictionary. This method of parsing is unsafe as it can execute arbitrary Python code contained within the response. An attacker can exploit this vulnerability by manipulating the response from the AWS SageMaker LLM endpoint to include malicious Python code, leading to potential execution of arbitrary commands on the system hosting the application. The issue is fixed in version 0.6.0.

A CWE-306 "Missing Authentication for Critical Function" was discovered affecting the following devices manufactured by Advantech: EKI-6333AC-2G (<= 1.6.3), EKI-6333AC-2GD (<= v1.6.3) and EKI-6333AC-1GPO (<= v1.2.1). The vulnerability can be exploited by remote unauthenticated users capable of interacting with the default "edgserver" service enabled on the access point.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the tomography_ping_address parameter in /HNAP1/ interface.

tz.pl on XoruX LPAR2RRD and STOR2RRD 2.70 virtual appliances allows cmd=set&tz=OS command injection via shell metacharacters in a timezone.

rConfig 3.9.5 allows command injection by sending a crafted GET request to lib/ajaxHandlers/ajaxArchiveFiles.php since the path parameter is passed directly to the exec function without being escaped.

Bert-VITS2 is the VITS2 Backbone with multilingual bert. User input supplied to the data_dir variable is used directly in a command executed with subprocess.run(cmd, shell=True) in the bert_gen function, which leads to arbitrary command execution. This affects fishaudio/Bert-VITS2 2.3 and earlier.

CGI implementation in Yaws web server versions 1.81 to 2.0.7 is vulnerable to OS command injection.

A command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands. We have already fixed the vulnerability in the following versions: QTS 5.1.9.2954 build 20241120 and later QTS 5.2.2.2950 build 20241114 and later QuTS hero h5.1.9.2954 build 20241120 and later QuTS hero h5.2.2.2952 build 20241116 and later

An issue in Horizon Business Services Inc. Caterease 16.0.1.1663 through 24.0.1.2405 and possibly later versions, allows a remote attacker to expand control over the operating system from the database due to the execution of commands with unnecessary privileges.

Exposed Erlang Cookie could lead to Remote Command Execution (RCE) attack. Communication between Erlang nodes is done by exchanging a shared secret (aka "magic cookie"). There are cases where the magic cookie is included in the content of the logs. An attacker can use the cookie to attach to an Erlang node and run OS level commands on the system running the Erlang node. Affects version: 6.5.1. Fix version: 6.6.0.

Gipsy is a multi-purpose discord bot which aim to be as modular and user-friendly as possible. In versions prior to 1.3 users can run command on the host machine with sudoer permission. The `!ping` command when provided with an IP or hostname used to run a bash `ping <IP>` without verification that the IP or hostname was legitimate. This command was executed with root permissions and may lead to arbitrary command injection on the host server. Users are advised to upgrade. There are no known workarounds for this vulnerability.

D-Link DI-8200 16.07.26A1 is vulnerable to remote command execution in the msp_info_htm function via the flag parameter and cmd parameter.

An issue in Datart v.1.0.0-rc.3 allows a remote attacker to execute arbitrary code via the INIT connection parameter.

A remote command execution vulnerability exists in add_server_service of PPTP_SERVER in Mercury Router MER1200 v1.0.1 and Mercury Router MER1200G v1.0.1.

OS command injection vulnerability exists in KB-AHR series and KB-IRIP series. If this vulnerability is exploited, an arbitrary OS command may be executed on the product or the device settings may be altered. Affected products and versions are as follows: KB-AHR04D versions prior to 91110.1.101106.78, KB-AHR08D versions prior to 91210.1.101106.78, KB-AHR16D versions prior to 91310.1.101106.78, KB-IRIP04A versions prior to 95110.1.100290.78A, KB-IRIP08A versions prior to 95210.1.100290.78A, and KB-IRIP16A versions prior to 95310.1.100290.78A.

An issue in Horizon Business Services Inc. Caterease 16.0.1.1663 through 24.0.1.2405 and possibly later versions, allows a remote attacker to perform command line execution through SQL Injection due to improper neutralization of special elements used in an OS command.