A vulnerability was found in TRENDnet TEW-432BRP 3.10B20. Affected is the function formWPS of the file /goform/formWPS. The manipulation of the argument peerPin results in command injection. The attack can be executed remotely. The exploit has been made public and could be used. The vendor explains: "This product has been EOL for 15 years (since 2009). As the item has been EOL for such a long time, we are not able to replicate or fix any vulnerabilities." This vulnerability only affects products that are no longer supported by the maintainer.

There is a command injection vulnerability in the TRENDnet TEW-827DRU router with firmware version 2.10B01. An attacker can inject commands into the post request parameters usapps.@smb[%d].username in the apply.cgi interface, thereby gaining root shell privileges.

A vulnerability was found in TRENDnet TEW-822DRE 1.03B02. It has been declared as critical. This vulnerability affects unknown code of the file /admin_ping.htm of the component POST Request Handler. The manipulation of the argument ipv4_ping/ipv6_ping leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-252124. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A command injection issue in TRENDnet TEW-411BRPplus v.2.07_eu that allows a local attacker to execute arbitrary code via the data1 parameter in the debug.cgi page.

An issue in TRENDnet TEW-822DRE v.1.03B02 allows a local attacker to execute arbitrary code via the parameters ipv4_ping in the /boafrm/formSystemCheck.

An issue was discovered on TRENDnet TV-IP1314PI 5.5.3 200714 devices. Command injection can occur because the system function is used by davinci to unpack language packs without strict filtering of URL strings.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the IP Address in Add Gaming Rule.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication). The command injection exists in the key ip_addr.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the UDP Ports To Open in Add Gaming Rule.

A vulnerability has been found in TRENDnet TEW-811DRU 1.0.10.0 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-220018 is the identifier assigned to this vulnerability.

A vulnerability was found in Teledyne FLIR AX8 up to 1.46.16. This vulnerability affects the function setDataTime of the file \usr\www\application\models\settingsregional.php. Performing manipulation of the argument year/month/day/hour/minute results in command injection. The attack may be initiated remotely. The exploit has been made public and could be used. Upgrading to version 1.49.16 is able to resolve this issue. Upgrading the affected component is recommended. The vendor points out: "FLIR AX8 internal web site has been refactored to be able to handle the reported vulnerabilities."

OPNsense before 25.1.8 contains an authenticated command injection vulnerability in its Bridge Interface Edit endpoint (interfaces_bridge_edit.php). The span POST parameter is concatenated into a system-level command without proper sanitization or escaping, allowing an administrator to inject arbitrary shell operators and payloads. Successful exploitation results in remote code execution with the privileges of the web service (typically root), potentially leading to full system compromise or lateral movement. This vulnerability arises from inadequate input validation and improper handling of user-supplied data in backend command invocations.

SQLBot is an intelligent data query system based on a large language model and RAG. Versions 1.5.0 and below contain a Stored Prompt Injection vulnerability that chains three flaws: a missing permission check on the Excel upload API allowing any authenticated user to upload malicious terminology, unsanitized storage of terminology descriptions containing dangerous payloads, and a lack of semantic fencing when injecting terminology into the LLM's system prompt. Together, these flaws allow an attacker to hijack the LLM's reasoning to generate malicious PostgreSQL commands (e.g., COPY ... TO PROGRAM), ultimately achieving Remote Code Execution on the database or application server with postgres user privileges. The issue is fixed in v1.6.0.

GetSimple CMS is a content management system. In versions starting from 3.3.16 to 3.3.21, an authenticated user with access to the Edit component can inject arbitrary PHP into a component file and execute it via a crafted query string, resulting in Remote Code Execution (RCE). This issue is set to be patched in version 3.3.22.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects GC108P before 1.0.8.2, GC108PP before 1.0.8.2, GS108Tv3 before 7.0.7.2, GS110TPv3 before 7.0.7.2, GS110TPP before 7.0.7.2, GS110TUP before 1.0.5.3, GS710TUP before 1.0.5.3, GS308T before 1.0.3.2, GS310TP before 1.0.3.2, GS710TUP before 1.0.5.3, GS716TP before 1.0.4.2, GS716TPP before 1.0.4.2, GS724TPP before 2.0.6.3, GS724TPv2 before 2.0.6.3, GS724TPP before 2.0.6.3, GS728TPPv2 before 6.0.8.2, GS728TPv2 before 6.0.8.2, GS752TPv2 before 6.0.8.2, GS752TPP before 6.0.8.2, GS750E before 1.0.1.10, MS510TXM before 1.0.4.2, and MS510TXUP before 1.0.4.2.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.60, DM200 before 1.0.0.66, EX2700 before 1.0.1.56, EX6150v2 before 1.0.1.86, EX6200v2 before 1.0.1.86, EX6250 before 1.0.0.128, EX6400 before 1.0.2.144, EX6400v2 before 1.0.0.128, EX6410 before 1.0.0.128, EX6420 before 1.0.0.128, EX7300 before 1.0.2.144, EX7300v2 before 1.0.0.128, EX7320 before 1.0.0.128, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.5.26, R9000 before 1.0.5.2, RAX120 before 1.0.1.128, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.80, WNR2000v5 before 1.0.0.74, XR500 before 2.3.2.66, RBK20 before 2.7.3.22, RBR20 before 2.7.3.22, RBS20 before 2.7.3.22, RBK40 before 2.7.3.22, RBR40 before 2.7.3.22, and RBS40 before 2.7.3.22.

NETGEAR D6220 devices before 1.0.0.76 are affected by command injection by an authenticated user.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6200 before 1.1.00.40, D7000 before 1.0.1.78, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6050 before 1.0.1.26, JR6150 before 1.0.1.26, R6120 before 1.0.0.66, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.64, R6800 before 1.2.0.62, R6700v2 before 1.2.0.62, R6900v2 before 1.2.0.62, R7450 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, AC2600 before 1.2.0.62, and WNR2020 before 1.1.0.62.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Lack of input validation/sanitization in the 'setLanCfg' API endpoint in httpd in the Tenda RX2 Pro 16.03.30.14 allows a remote attacker that is authorized to the web management portal to gain root shell access to the device by sending a crafted web request. This is persistent because the command injection is saved in the configuration of the device.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7900 before 1.0.4.38, R7900P before 1.4.2.84, R8000 before 1.0.4.68, R8000P before 1.4.2.84, RAX200 before 1.0.3.106, MR60 before 1.0.6.110, RAX45 before 1.0.2.72, RAX80 before 1.0.3.106, MS60 before 1.0.6.110, RAX50 before 1.0.2.72, RAX75 before 1.0.3.106, RBR750 before 3.2.16.6, RBR850 before 3.2.16.6, RBS750 before 3.2.16.6, RBS850 before 3.2.16.6, RBK752 before 3.2.16.6, and RBK852 before 3.2.16.6.

Dell SmartFabric OS10 Software, versions prior to 10.6.1.0, contain an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7000 before 1.0.11.126, R6900P before 1.3.2.126, and R7000P before 1.3.2.126.

Dell SmartFabric OS10 Software, versions prior to 10.6.1.0, contain an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Code execution.

In Citrix XenMobile Server through 10.12 RP9, there is an Authenticated Command Injection vulnerability, leading to remote code execution with root privileges.

A vulnerability classified as critical was found in D-Link DIR-600L up to 2.07B01. This vulnerability affects the function wake_on_lan. The manipulation of the argument host leads to command injection. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered in ThoughtWorks GoCD before 21.3.0. An attacker with privileges to create a new pipeline on a GoCD server can abuse a command-line injection in the Git URL "Test Connection" feature to execute arbitrary code.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been rated as critical. Affected by this issue is the function sub_435E04. The manipulation of the argument host leads to command injection. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

VINGA WR-N300U 77.102.1.4853 is affected by a command execution vulnerability in the goahead component.

** UNSUPPORTED WHEN ASSIGNED ** The Apache Spark UI offers the possibility to enable ACLs via the configuration option spark.acls.enable. With an authentication filter, this checks whether a user has access permissions to view or modify the application. If ACLs are enabled, a code path in HttpSecurityFilter can allow someone to perform impersonation by providing an arbitrary user name. A malicious user might then be able to reach a permission check function that will ultimately build a Unix shell command based on their input, and execute it. This will result in arbitrary shell command execution as the user Spark is currently running as. This issue was disclosed earlier as CVE-2022-33891, but incorrectly claimed version 3.1.3 (which has since gone EOL) would not be affected. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Users are recommended to upgrade to a supported version of Apache Spark, such as version 3.4.0.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the setSessionTime function in /cgi-bin/luci/api/common..

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the runPackDiagnose function in /cgi-bin/luci/api/diagnose.

A vulnerability was found in TOTOLINK N150RT 3.4.0-B20190525. It has been rated as critical. This issue affects some unknown processing of the file /boafrm/formWsc. The manipulation of the argument localPin leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been identified in SIMATIC CN 4100 (All versions < V4.0.1). The affected application do not properly validate input parameters in its REST API, resulting in improper handling of unexpected arguments. This could allow an authenticated attacker to execute arbitrary code with limited privileges.

OpenMage LTS is an e-commerce platform. Prior to versions 19.4.22 and 20.0.19, a layout block was able to bypass the block blacklist to execute remote code. Versions 19.4.22 and 20.0.19 contain a patch for this issue.

A command injection vulnerability exists in Ivanti Avalanche before 6.3.3 allows an attacker with access to the Inforail Service to perform arbitrary command execution.

A command Injection vulnerability exists in Ivanti Avalanche before 6.3.3 allows an attacker with access to the Inforail Service to perform arbitrary command execution.

A vulnerability has been found in Wavlink NU516U1 M16U1_V240425. Affected is the function change_wifi_password of the file /cgi-bin/adm.cgi. The manipulation of the argument wl_channel/wl_Pass/EncrypType leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure.

An authenticated remote code execution vulnerability was discovered in the AOS-CX Network Analytics Engine (NAE) in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): AOS-CX 10.07.xxxx: 10.07.0050 and below, AOS-CX 10.08.xxxx: 10.08.1030 and below, AOS-CX 10.09.xxxx: 10.09.0002 and below. Aruba has released upgrades for Aruba AOS-CX devices that address this security vulnerability.

NVIDIA Cumulus Linux and NVOS products contain a vulnerability in the NVUE interface, where a low-privileged user could inject a command. A successful exploit of this vulnerability might lead to escalation of privileges.

NVIDIA Cumulus Linux and NVOS products contain a vulnerability in the NVUE interface, where a low-privileged user could inject a command. A successful exploit of this vulnerability might lead to escalation of privileges.

Multiple authenticated remote code execution vulnerabilities were discovered in the AOS-CX command line interface in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): AOS-CX 10.06.xxxx: 10.06.0170 and below, AOS-CX 10.07.xxxx: 10.07.0050 and below, AOS-CX 10.08.xxxx: 10.08.1030 and below. Aruba has released upgrades for Aruba AOS-CX devices that address these security vulnerabilities.

An OS command injection vulnerability has been reported to affect Video Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Video Station 5.8.2 and later

A vulnerability was detected in Totolink NR1800X 9.1.0u.6279_B20210910. This affects the function sub_41A68C of the file /cgi-bin/cstecgi.cgi. Performing a manipulation of the argument setUssd results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used.