Transient DOS due to null pointer dereference in Bluetooth HOST while receiving an attribute protocol PDU with zero length data.

Unchecked Return Value to NULL Pointer Dereference vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routines fluid_msg::ActionSet::unpack. This issue affects libfluid: 0.1.0.

A vulnerability, which was classified as critical, was found in D-Link DAP-1562 1.10. This affects the function pure_auth_check of the component HTTP POST Request Handler. The manipulation of the argument a1 leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Unchecked Return Value to NULL Pointer Dereference vulnerability in Open Networking Foundation (ONF) libfluid (libfluid_msg module). This vulnerability is associated with program routines fluid_msg::of13::InstructionSet::unpack. This issue affects libfluid: 0.1.0.

In Fluent Bit 2.1.8 through 2.2.1, a NULL pointer dereference can be caused via an invalid HTTP payload with the content type of x-www-form-urlencoded. It crashes and does not restart. This could result in logs not being delivered properly.

When a BIG-IP Advanced WAF or BIG-IP ASM policy with a Request Body Handling option is attached to a virtual server, undisclosed requests can cause the BD process to terminate. The condition results from setting the Request Body Handling option in the Header-Based Content Profile for an Allowed URL with "Apply value and content signatures and detect threat campaigns."  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

TP Link MR200 V4 Firmware version 210201 was discovered to contain a null-pointer-dereference in the web administration panel on /cgi/login via the sign, Action or LoginStatus query parameters which could lead to a denial of service by a local or remote unauthenticated attacker.

Gobby 0.4.11 allows a NULL pointer dereference in the D-Bus handler for certain set_language calls.

A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS Evolved on ACX7024, ACX7100-32C and ACX7100-48L allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). If a specific IPv4 UDP packet is received and sent to the Routing Engine (RE) packetio crashes and restarts which causes a momentary traffic interruption. Continued receipt of such packets will lead to a sustained DoS. This issue does not happen with IPv6 packets. This issue affects Juniper Networks Junos OS Evolved on ACX7024, ACX7100-32C and ACX7100-48L: * 21.4-EVO versions earlier than 21.4R3-S6-EVO; * 22.1-EVO versions earlier than 22.1R3-S5-EVO; * 22.2-EVO versions earlier than 22.2R2-S1-EVO, 22.2R3-EVO; * 22.3-EVO versions earlier than 22.3R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions earlier than 21.4R1-EVO.

.NET Denial of Service Vulnerability

A flaw has been found in Free5GC SMF up to 4.1.0. Affected is the function HandlePfcpAssociationReleaseRequest of the file internal/pfcp/handler/handler.go of the component PFCP UDP Endpoint. Executing a manipulation can lead to null pointer dereference. The attack may be launched remotely. The exploit has been published and may be used. A patch should be applied to remediate this issue.

When BIG-IP AFM Device DoS or DoS profile is configured with NXDOMAIN attack vector and bad actor detection, undisclosed queries can cause the Traffic Management Microkernel (TMM) to terminate.  NOTE: Software versions which have reached End of Technical Support (EoTS) are not evaluated

jwx is a Go module implementing various JWx (JWA/JWE/JWK/JWS/JWT, otherwise known as JOSE) technologies. Calling `jws.Parse` with a JSON serialized payload where the `signature` field is present while `protected` is absent can lead to a nil pointer dereference. The vulnerability can be used to crash/DOS a system doing JWS verification. This vulnerability has been patched in versions 2.0.19 and 1.2.28.

An issue was discovered in mruby 1.4.1. There is a NULL pointer dereference in mrb_class_real because "class BasicObject" is not properly supported in class.c.

A null pointer dereference vulnerability in IPSec component of Ivanti Connect Secure (9.x, 22.x) and Ivanti Policy Secure allows an unauthenticated malicious user to send specially crafted requests in-order-to crash the service thereby causing a DoS attack

A vulnerability in the TLS processing feature of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an issue that occurs when TLS traffic is processed. An attacker could exploit this vulnerability by sending certain TLS traffic over IPv4 through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition and impacting traffic to and through the affected device.

Microsoft Message Queuing (MSMQ) Denial of Service Vulnerability

HarfBuzz::Shaper versions before 0.032 for Perl contains a bundled library with a null pointer dereference vulnerability.  Versions before 0.032 contain HarfBuzz 8.4.0 or earlier bundled as hb_src.tar.gz in the source tarball, which is affected by CVE-2026-22693.

In Wi-Fi driver, there is a possible system crash due to null pointer dereference. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: GN20220720014; Issue ID: GN20220720014.

A vulnerability in the HTTP Server feature of Cisco IOS XE Software when the Telephony Service feature is enabled could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a null pointer dereference when accessing specific URLs. An attacker could exploit this vulnerability by sending crafted HTTP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, causing a DoS condition on the affected device.

nghttp2 version >= 1.10.0 and nghttp2 <= v1.31.0 contains an Improper Input Validation CWE-20 vulnerability in ALTSVC frame handling that can result in segmentation fault leading to denial of service. This attack appears to be exploitable via network client. This vulnerability appears to have been fixed in >= 1.31.1.

In GNU SASL before 2.2.3, DIGEST-MD5 has a NULL pointer dereference affecting both clients and servers, via a known token with no accompanying = character. This occurs in lib/digest-md5/getsubopt.c.

A vulnerability has been found in TOTOLINK WA1200 5.9c.2914. The impacted element is an unknown function of the file cstecgi.cgi of the component HTTP Request Handler. The manipulation leads to null pointer dereference. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.

The Tapo C100 v5, C220 v1 and C520WS v2 cameras’ HTTP service does not safely handle POST requests containing an excessively large Content-Length header. The resulting failed memory allocation triggers a NULL pointer dereference, causing the main service process to crash. An unauthenticated attacker can repeatedly crash the service, causing temporary denial of service. The device restarts automatically, and repeated requests can keep it unavailable.

A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS allows an attacker to cause the Junos OS kernel to crash. Continued receipt of this specifically crafted malicious MPLS packet will cause a sustained Denial of Service condition. This issue require it to be received on an interface configured to receive this type of traffic. Affected releases are Juniper Networks Junos OS: 12.1X46 versions above and including 12.1X46-D76 prior to 12.1X46-D81 on SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 12.3R12-S10; 12.3X48 versions above and including 12.3X48-D66 prior to 12.3X48-D75 on SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 14.1X53-D47 on EX2200/VC, EX3200, EX3300/VC, EX4200, EX4300, EX4550/VC, EX4600, EX6200, EX8200/VC (XRE), QFX3500, QFX3600, QFX5100; 14.1X53 versions above and including 14.1X53-D115 prior to 14.1X53-D130 on QFabric System; 15.1 versions above and including 15.1F6-S10; 15.1R4-S9; 15.1R6-S6; 15.1 versions above and including 15.1R7 prior to 15.1R7-S2; 15.1X49 versions above and including 15.1X49-D131 prior to 15.1X49-D150 on SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 15.1X53 versions above 15.1X53-D233 prior to 15.1X53-D235 on QFX5200/QFX5110; 15.1X53 versions up to and including 15.1X53-D471 prior to 15.1X53-D590 on NFX150, NFX250; 15.1X53-D67 on QFX10000 Series; 15.1X53-D59 on EX2300/EX3400; 16.1 versions above and including 16.1R3-S8; 16.1 versions above and including 16.1R4-S9 prior to 16.1R4-S12; 16.1 versions above and including 16.1R5-S4; 16.1 versions above and including 16.1R6-S3 prior to 16.1R6-S6; 16.1 versions above and including 16.1R7 prior to 16.1R7-S2; 16.2 versions above and including 16.2R1-S6; 16.2 versions above and including 16.2R2-S5 prior to 16.2R2-S7; 17.1R1-S7; 17.1 versions above and including 17.1R2-S7 prior to 17.1R2-S9; 17.2R1-S6; 17.2 versions above and including 17.2R2-S4 prior to 17.2R2-S6; 17.2X75 versions above and including 17.2X75-D100 prior to X17.2X75-D101, 17.2X75-D110; 17.3 versions above and including 17.3R1-S4 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.3 versions above and including 17.3R2-S2 prior to 17.3R2-S4 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.3R3 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.4 versions above and including 17.4R1-S3 prior to 17.4R1-S5 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 17.4R2 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 18.1 versions above and including 18.1R2 prior to 18.1R2-S3, 18.1R3 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 18.2 versions above and including 18.2R1 prior to 18.2R1-S2, 18.2R1-S3, 18.2R2 on All non-SRX Series and SRX100, SRX110, SRX210, SRX220, SRX240m, SRX550m SRX650, SRX300, SRX320, SRX340, SRX345, SRX1500, SRX4100, SRX4200, SRX4600 and vSRX; 18.2X75 versions above and including 18.2X75-D5 prior to 18.2X75-D20.

systemd-resolved through 233 allows remote attackers to cause a denial of service (daemon crash) via a crafted DNS response with an empty question section.

A denial-of-service security issue exists in the affected product and version. The security issue stems from the controller repeatedly attempting to forward messages. The issue could result in a major nonrecoverable fault on the controller.

SSH dissector crash in Wireshark 4.4.0 to 4.4.8 allows denial of service

A Null Pointer Dereference vulnerability exists in the referer header check of the web portal of TP-Link TL-WR841N v14, caused by improper input validation.  A remote, unauthenticated attacker can exploit this flaw and cause Denial of Service on the web portal service.This issue affects TL-WR841N v14: before 250908.

An issue was discovered in Oniguruma 6.2.0, as used in Oniguruma-mod in Ruby through 2.4.1 and mbstring in PHP through 7.1.5. A SIGSEGV occurs in left_adjust_char_head() during regular expression compilation. Invalid handling of reg->dmax in forward_search_range() could result in an invalid pointer dereference, normally as an immediate denial-of-service condition.

The lexer_process_char_literal function in jerry-core/parser/js/js-lexer.c in JerryScript 1.0 does not skip memory allocation for empty strings, which allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via malformed JavaScript source code, related to the jmem_heap_free_block function.

An access violation vulnerability exists in the DirectComposition functionality win32kbase.sys driver version 10.0.22000.593 as part of Windows 11 version 22000.593 and version 10.0.20348.643 as part of Windows Server 2022 version 20348.643. A specially-crafted set of syscalls can lead to a reboot. An unprivileged user can run specially-crafted code to trigger Denial Of Service.

A Null Pointer Dereference issue was discovered in Schneider Electric Wonderware ArchestrA Logger, versions 2017.426.2307.1 and prior. The null pointer dereference vulnerability could allow an attacker to crash the logger process, causing a denial of service for logging and log-viewing (applications that use the Wonderware ArchestrA Logger continue to run when the Wonderware ArchestrA Logger service is unavailable).

On F5 BIG-IP LTM, Advanced WAF, ASM, or APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5, 14.1.x versions prior to 14.1.4.6, and all versions of 13.1.x, 12.1.x, and 11.6.x, when a virtual server is configured with HTTP, TCP on one side (client/server), and DTLS on the other (server/client), undisclosed requests can cause the TMM process to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

NULL Pointer Dereference in µD3TN via non-singleton destination Endpoint Identifier allows remote attacker to reliably cause DoS

telnetd in GNU Inetutils through 2.3, MIT krb5-appl through 1.0.3, and derivative works has a NULL pointer dereference via 0xff 0xf7 or 0xff 0xf8. In a typical installation, the telnetd application would crash but the telnet service would remain available through inetd. However, if the telnetd application has many crashes within a short time interval, the telnet service would become unavailable after inetd logs a "telnet/tcp server failing (looping), service terminated" error. NOTE: MIT krb5-appl is not supported upstream but is shipped by a few Linux distributions. The affected code was removed from the supported MIT Kerberos 5 (aka krb5) product many years ago, at version 1.8.

A vulnerability was found in D-Link DI-8400 16.07.26A1. It has been classified as problematic. This affects an unknown part of the file usb_paswd.asp of the component jhttpd. The manipulation of the argument share_enable leads to null pointer dereference. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A Null Pointer Dereference vulnerability exists in the TON Virtual Machine (TVM) within the TON Blockchain before v2025.06. The issue is located in the execution logic of the INMSGPARAM instruction, where the program fails to validate if a specific pointer is null before accessing it. By sending a malicious transaction or smart contract, an attacker can trigger this null pointer dereference, causing the validator node process to crash (segmentation fault). This results in a Denial of Service (DoS) affecting the availability of the entire blockchain network.

In Eclipse Mosquitto version from 1.0 to 1.4.15, a Null Dereference vulnerability was found in the Mosquitto library which could lead to crashes for those applications using the library.

In lighttpd 1.4.65, mod_wstunnel does not initialize a handler function pointer if an invalid HTTP request (websocket handshake) is received. It leads to null pointer dereference which crashes the server. It could be used by an external attacker to cause denial of service condition.

Null Pointer Dereference vulnerability exists in D-Link DSP-W215 1.10, which could let a remote malicious user cause a denial of servie via usr/bin/lighttpd. It could be triggered by sending an HTTP request without URL in the start line directly to the device. NOTE: The DSP-W215 and all hardware revisions is considered End of Life and as such this issue will not be patched

free5gc UDM provides Unified Data Management (UDM) for free5GC, an open-source project for 5th generation (5G) mobile core networks. Versions up to and including 1.4.1 have a NULL Pointer Dereference vulnerability. Remote unauthenticated attackers can trigger a service panic (Denial of Service) by sending a crafted PUT request with an unexpected ueId, crashing the UDM service. All deployments of free5GC using the UDM component may be affected. free5gc/udm pull request 76 contains a fix for the issue. No direct workaround is available at the application level. Applying the official patch is recommended.

A message unchecked NULL return value vulnerability in Trend Micro Apex Central could allow a remote attacker to create a denial-of-service condition on affected installations. Please note: authentication is not required in order to exploit this vulnerability..

Issue summary: Processing a malformed PKCS#12 file can trigger a NULL pointer dereference in the PKCS12_item_decrypt_d2i_ex() function. Impact summary: A NULL pointer dereference can trigger a crash which leads to Denial of Service for an application processing PKCS#12 files. The PKCS12_item_decrypt_d2i_ex() function does not check whether the oct parameter is NULL before dereferencing it. When called from PKCS12_unpack_p7encdata() with a malformed PKCS#12 file, this parameter can be NULL, causing a crash. The vulnerability is limited to Denial of Service and cannot be escalated to achieve code execution or memory disclosure. Exploiting this issue requires an attacker to provide a malformed PKCS#12 file to an application that processes it. For that reason the issue was assessed as Low severity according to our Security Policy. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue.

Nitro PDF Pro for Windows 14.41.1.4 contains a NULL pointer dereference vulnerability in the JavaScript implementation of app.alert(). When app.alert() is called with more than one argument and the first argument evaluates to null (for example, app.alert(app.activeDocs, true) when app.activeDocs is null), the engine routes the call through a fallback path intended for non-string arguments. In this path, js_ValueToString() is invoked on the null value and returns an invalid string pointer, which is then passed to JS_GetStringChars() without validation. Dereferencing this pointer leads to an access violation and application crash when opening a crafted PDF.

gdk-pixbuf-thumbnailer.c in gdk-pixbuf allows context-dependent attackers to cause a denial of service (NULL pointer dereference and application crash) via vectors related to printing an error message.

A NULL pointer dereference vulnerability in the importDataObject() function of PDF-XChange Editor v10.7.3.401 allows attackers to cause a Denial of Service (DoS) via a crafted input.

A flaw was found in Blender 3.3.0. A null pointer dereference exists in source/blender/gpu/opengl/gl_backend.cc that may lead to loss of confidentiality and integrity.

In Softing uaToolkit Embedded before 1.40.1, a malformed PubSub discovery announcement message can cause a NULL pointer dereference or out-of-bounds memory access in the subscriber application.

An issue was discovered in Artifex MuPDF before 1912de5f08e90af1d9d0a9791f58ba3afdb9d465. The pdf_run_xobject function in pdf-op-run.c encounters a NULL pointer dereference during a Fitz fz_paint_pixmap_with_mask painting operation. Versions 1.11 and later are unaffected.