A remote code execution vulnerability was identified in GitHub Enterprise Server that could be exploited when building a GitHub Pages site. User-controlled configuration of the underlying parsers used by GitHub Pages were not sufficiently restricted and made it possible to execute commands on the GitHub Enterprise Server instance. To exploit this vulnerability, an attacker would need permission to create and build a GitHub Pages site on the GitHub Enterprise Server instance. This vulnerability affected all versions of GitHub Enterprise Server prior to 2.22.7 and was fixed in 2.22.7, 2.21.15, and 2.20.24. The underlying issues contributing to this vulnerability were identified through the GitHub Security Bug Bounty program.
An authenticated command injection vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN gateways Command Line Interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.
Dell SmartFabric OS10 Software, versions 10.5.6.x, 10.5.5.x, 10.5.4.x, 10.5.3.x, contains an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability leading to code execution.
iCatch DVR firmware before 20200103 do not validate function parameter properly, resulting attackers executing arbitrary command.
A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 HF1). Affected applications are vulnerable to command injection due to missing server side input sanitation when loading SNMP configurations. This could allow an attacker with the right to modify the SNMP configuration to execute arbitrary code with root privileges.
PhoneSystem Terminal in 3CX Phone System (Debian based installation) 16.0.0.1570 allows an authenticated attacker to run arbitrary commands with the phonesystem user privileges because of "<space><space> followed by <shift><enter>" mishandling.
A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.2 HF1). Affected applications are vulnerable to command injection due to missing server side input sanitation when loading VxLAN configurations. This could allow an authenticated attacker to execute arbitrary code with root privileges.
An issue in Netgate pfSense v.2.7.0 allows a remote attacker to execute arbitrary code via a crafted request to the interfaces_gif_edit.php and interfaces_gre_edit.php components.
An issue was discovered on Mitel 6869i through 4.5.0.41 and 5.x through 5.0.0.1018 devices. A command injection vulnerability exists in the hostname parameter taken in by the provis.html endpoint. The provis.html endpoint performs no sanitization on the hostname parameter (sent by an authenticated user), which is subsequently written to disk. During boot, the hostname parameter is executed as part of a series of shell commands. Attackers can achieve remote code execution in the root context by placing shell metacharacters in the hostname parameter.
On Mitel 6869i 4.5.0.41 devices, the Manual Firmware Update (upgrade.html) page does not perform sanitization on the username and path parameters (sent by an authenticated user) before appending flags to the busybox ftpget command. This leads to $() command execution.
** UNSUPPORTED WHEN ASSIGNED ** The Apache Spark UI offers the possibility to enable ACLs via the configuration option spark.acls.enable. With an authentication filter, this checks whether a user has access permissions to view or modify the application. If ACLs are enabled, a code path in HttpSecurityFilter can allow someone to perform impersonation by providing an arbitrary user name. A malicious user might then be able to reach a permission check function that will ultimately build a Unix shell command based on their input, and execute it. This will result in arbitrary shell command execution as the user Spark is currently running as. This issue was disclosed earlier as CVE-2022-33891, but incorrectly claimed version 3.1.3 (which has since gone EOL) would not be affected. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Users are recommended to upgrade to a supported version of Apache Spark, such as version 3.4.0.
In Splunk Enterprise versions below 8.2.12, 9.0.6, and 9.1.1, an attacker can create an external lookup that calls a legacy internal function. The attacker can use this internal function to insert code into the Splunk platform installation directory. From there, a user can execute arbitrary code on the Splunk platform Instance.
In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109 and 9.1.2308.207, an authenticated user could create an external lookup that calls a legacy internal function. The authenticated user could use this internal function to insert code into the Splunk platform installation directory. From there, the user could execute arbitrary code on the Splunk platform Instance.
Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in StylemixThemes Consulting Elementor Widgets, StylemixThemes Masterstudy Elementor Widgets allows OS Command Injection.This issue affects Consulting Elementor Widgets: from n/a through 1.3.0; Masterstudy Elementor Widgets: from n/a through 1.2.2.
Command injection vulnerability in the homemng.htm endpoint in Juplink RX4-1500 Wifi router firmware versions V1.0.2, V1.0.3, V1.0.4, and V1.0.5 allows authenticated remote attackers to execute commands as root via specially crafted HTTP requests to the vulnerable endpoint.
An issue was discovered in Atos Unify OpenScape Voice Trace Manager V8 before V8 R0.9.11. It allows authenticated command injection via ftp.
A flaw has been found in D-Link DI-7100G C1 24.04.18D1. This affects the function start_proxy_client_email. Executing a manipulation can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used.
IBM Security Identity Manager Virtual Appliance 6.0 and 7.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 127394.
OpenProject is an open-source, web-based project management software. Versions prior to 16.6.6 and 17.0.2 have an arbitrary file write vulnerability in OpenProject’s repository diff download endpoint (`/projects/:project_id/repository/diff.diff`) when rendering a single revision via git show. By supplying a specially crafted rev value (for example, `rev=--output=/tmp/poc.txt)`, an attacker can inject git show command-line options. When OpenProject executes the SCM command, Git interprets the attacker-controlled rev as an option and writes the output to an attacker-chosen path. As a result, any user with the `:browse_repository` permission on the project can create or overwrite arbitrary files that the OpenProject process user is permitted to write. The written contents consist of git show output (commit metadata and patch), but overwriting application or configuration files still leads to data loss and denial of service, impacting integrity and availability. The issue has been fixed in OpenProject 17.0.2 and 16.6.6.
Tenda AC7V1.0 v15.03.06.44 firmware contains a command injection vulnerablility in formexeCommand function via the cmdinput parameter.
An issue in NETIS SYSTEMS WF2409E v.3.6.42541 allows a remote attacker to execute arbitrary code via the ping and traceroute functions of the diagnostic tools component in the admin management interface.
An issue in tiagorlampert CHAOS v5.0.1 allows a remote attacker to execute arbitrary code via the BuildClient function within client_service.go
CasaOS is an open-source personal cloud system. Prior to version 0.4.4, if an authenticated user using CasaOS is able to successfully connect to a controlled SMB server, they are able to execute arbitrary commands. Version 0.4.4 contains a patch for the issue.
A vulnerability has been found in Tenda FH1205 2.0.0.7(775) and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-258295. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
jcvi is a Python library to facilitate genome assembly, annotation, and comparative genomics. A configuration injection happens when user input is considered by the application in an unsanitized format and can reach the configuration file. A malicious user may craft a special payload that may lead to a command injection. The impact of a configuration injection may vary. Under some conditions, it may lead to command injection if there is for instance shell code execution from the configuration file values. This vulnerability does not currently have a fix.
A vulnerability has been found in Tenda FH1203 2.0.1.6 and classified as critical. This vulnerability affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-258160. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A10 Thunder ADC CsrRequestView Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of A10 Thunder ADC. Authentication is required to exploit this vulnerability. The specific flaw exists within the CsrRequestView class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of a10user. Was ZDI-CAN-22517.
A vulnerability has been found in Tenda FH1202 1.2.0.14(408) and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-258151. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
1Panel is an open source Linux server operation and maintenance management panel. Prior to version 1.3.6, an authenticated attacker can craft a malicious payloads to achieve command injection when entering the container terminal. The vulnerability has been fixed in v1.3.6.
Azure Identity SDK Remote Code Execution Vulnerability
There is a command injection vulnerability in the TRENDnet TEW-827DRU router with firmware version 2.10B01. An attacker can inject commands into the post request parameters usapps.config.smb_admin_name in the apply.cgi interface, thereby gaining root shell privileges.
In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.
Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.0 and V10 R1.34.8, Assistant V10 R0, Manager V10 R1 before V10 R1.42.0 and V10 R1.34.8, and Manager V10 R0 allow command injection by authenticated users, aka OSFOURK-23556.
Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.
Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
NETGEAR D6220 devices before 1.0.0.76 are affected by command injection by an authenticated user.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, and RBS850 before 3.2.17.12.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.
Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, and RBS850 before 3.2.17.12.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7850 before 1.0.5.74, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, and RBS850 before 3.2.17.12.
Command Injection vulnerability discovered in 4ipnet EAP-767 device v3.42.00 within the web interface of the device allows attackers with valid credentials to inject arbitrary shell commands to be executed by the device with root privileges.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects LBR20 before 2.6.3.50, RBS50Y before 2.7.3.22, RBR10 before 2.7.3.22, RBR20 before 2.7.3.22, RBR40 before 2.7.3.22, RBR50 before 2.7.3.22, RBS10 before 2.7.3.22, RBS20 before 2.7.3.22, RBS40 before 2.7.3.22, RBS50 before 2.7.3.22, RBK12 before 2.7.3.22, RBK20 before 2.7.3.22, RBK40 before 2.7.3.22, and RBK50 before 2.7.3.22.
A command injection vulnerability exists in the 'SaveStaticRouteIPv4Params' parameter of the Motorola MR2600. A remote attacker can exploit this vulnerability to achieve command execution. Authentication is required, however can be bypassed.
Vinchin Backup & Recovery v7.2 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the deleteUpdateAPK function.
A command injection vulnerability exists in the ‘SaveSysLogParams’ parameter of the Motorola MR2600. A remote attacker can exploit this vulnerability to achieve command execution. Authentication is required, however can be bypassed.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.60, DM200 before 1.0.0.66, EX2700 before 1.0.1.56, EX6150v2 before 1.0.1.86, EX6200v2 before 1.0.1.86, EX6250 before 1.0.0.128, EX6400 before 1.0.2.144, EX6400v2 before 1.0.0.128, EX6410 before 1.0.0.128, EX6420 before 1.0.0.128, EX7300 before 1.0.2.144, EX7300v2 before 1.0.0.128, EX7320 before 1.0.0.128, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.5.26, R9000 before 1.0.5.2, RAX120 before 1.0.1.128, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.80, WNR2000v5 before 1.0.0.74, XR500 before 2.3.2.66, RBK20 before 2.7.3.22, RBR20 before 2.7.3.22, RBS20 before 2.7.3.22, RBK40 before 2.7.3.22, RBR40 before 2.7.3.22, and RBS40 before 2.7.3.22.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.