Versions of the package nemo-appium before 0.0.9 are vulnerable to Command Injection due to improper input sanitization in the 'module.exports.setup' function. **Note:** In order to exploit this vulnerability appium-running 0.1.3 has to be installed as one of nemo-appium dependencies.

MMP: All versions prior to v1.0.3, PTP C-series: Device versions prior to v2.8.6.1, and PTMP C-series and A5x: Device versions prior to v2.5.4.1 does not properly sanitize user input on several locations, which may allow an attacker to inject arbitrary commands.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

TinyCheck before commits 9fd360d and ea53de8 was vulnerable to command injection due to insufficient checks of input parameters in several places.

An arbitrary file writing vulnerability in the Secure PDF eXchange (SPX) feature of Sophos Firewall versions older than 21.0 MR2 (21.0.2) can lead to pre-auth remote code execution, if a specific configuration of SPX is enabled in combination with the firewall running in High Availability (HA) mode.

OS Command Injection in GitHub repository gogs/gogs prior to 0.12.11.

OS Command Injection in GitHub repository yogeshojha/rengine prior to 1.2.0.

An issue was discovered in the dump function in shenzhim aaptjs 1.3.1, allows attackers to execute arbitrary code via the filePath parameters.

OS Command Injection in GitHub repository gogs/gogs prior to 0.12.9.

A remote command execution vulnerability exists in gogs/gogs versions <=0.12.7 when deployed on a Windows server. The vulnerability arises due to improper validation of the `tree_path` parameter during file uploads. An attacker can set `tree_path=.git.` to upload a file into the .git directory, allowing them to write or rewrite the `.git/config` file. If the `core.sshCommand` is set, this can lead to remote command execution.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been rated as critical. Affected by this issue is the function setUpgradeUboot of the file upgrade.so. The manipulation of the argument FileName leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the ntpServIP parameter in the Time Settings.

Command Injection vulnerability in git-interface@2.1.1 in GitHub repository yarkeev/git-interface prior to 2.1.2. If both are provided by user input, then the use of a `--upload-pack` command-line argument feature of git is also supported for `git clone`, which would then allow for any operating system command to be spawned by the attacker.

An unauthenticated command-execution vulnerability exists in TerraMaster TOS through 4.2.06 via shell metacharacters in the Event parameter in include/makecvs.php during CSV creation.

TOTOLink A860R V4.1.2cu.5182_B20201027 was discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

TOTOLink T6 V5.9c.4085_B20190428 was discovered to contain a command injection vulnerability in the "Main" function. This vulnerability allows attackers to execute arbitrary commands via the QUERY_STRING parameter.

OS Command Injection in GitHub repository part-db/part-db prior to 0.5.11.

All versions of the package wifey are vulnerable to Command Injection via the connect() function due to improper input sanitization.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this issue is the function RP_checkFWByBBS of the file /goform/RP_checkFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

HGiga MailSherlock does not validate specific parameters properly. Attackers can use the vulnerability to launch Command inject attacks remotely and execute arbitrary commands of the system.

A vulnerability, which was classified as critical, was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected is the function wirelessAdvancedHidden of the file /goform/wirelessAdvancedHidden. The manipulation of the argument ExtChSelector/24GSelector/5GSelector leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in Trend Micro Apex One (on-premise) management console could allow a pre-authenticated remote attacker to upload malicious code and execute commands on affected installations.

An issue was discovered in ClusterLabs Hawk 2.x through 2.3.0-x. There is a Ruby shell code injection issue via the hawk_remember_me_id parameter in the login_from_cookie cookie. The user logout routine could be used by unauthenticated remote attackers to execute code as hauser.

In TOTOLINK X6000R V9.4.0cu.852_B20230719, the shttpd file, sub_4119A0 function obtains fields from the front-end through Uci_ Set_ The Str function when passed to the CsteSystem function creates a command execution vulnerability.

The affected product is vulnerable to an authenticated OS command injection, which may allow an attacker to inject and execute arbitrary shell commands as the Admin (root) user.

D-Link DIR-868L B1 router firmware version FW2.05WWB02 contains an unauthenticated OS command injection vulnerability in the fileaccess.cgi component. The endpoint /dws/api/UploadFile accepts a pre_api_arg parameter that is passed directly to system-level shell execution functions without sanitization or authentication. Remote attackers can exploit this to execute arbitrary commands as root via crafted HTTP requests.

OS Command Injection in GitHub repository ljharb/npm-lockfile in v2.0.3 and v2.0.4.

Cursor is a code editor built for programming with AI. Cursor allows writing in-workspace files with no user approval in versions below 1.3.9, If the file is a dotfile, editing it requires approval but creating a new one doesn't. Hence, if sensitive MCP files, such as the .cursor/mcp.json file don't already exist in the workspace, an attacker can chain a indirect prompt injection vulnerability to hijack the context to write to the settings file and trigger RCE on the victim without user approval. This is fixed in version 1.3.9.

UUNIVERGE WA 1020 Ver8.2.11 and prior, UNIVERGE WA 1510 Ver8.2.11 and prior, UNIVERGE WA 1511 Ver8.2.11 and prior, UNIVERGE WA 1512 Ver8.2.11 and prior, UNIVERGE WA 2020 Ver8.2.11 and prior, UNIVERGE WA 2021 Ver8.2.11 and prior, UNIVERGE WA 2610-AP Ver8.2.11 and prior, UNIVERGE WA 2611-AP Ver8.2.11 and prior, UNIVERGE WA 2611E-AP Ver8.2.11 and prior, UNIVERGE WA WA2612-AP Ver8.2.11 and prior allows a remote attacker to execute arbitrary OS commands.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been rated as critical. Affected by this issue is the function setSystemWizard/setSystemControl of the file /setSystemWizard. The manipulation of the argument AdminID leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability in the web-based management interface of Cisco DNA Spaces Connector could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underling operating system with privileges of the web-based management application, which is running as a restricted user. This could result in changes being made to pages served by the web-based management application impacting the integrity or availability of the web-based management application.

An OS command injection vulnerability in lib/NSSDropoff.php in ZendTo 5.24-3 through 6.x before 6.10-7 allows unauthenticated remote attackers to execute arbitrary commands via shell metacharacters in the tmp_name parameter when dropping off a file via a POST /dropoff request.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been declared as critical. This vulnerability affects the function ssid1MACFilter of the file /goform/ssid1MACFilter. The manipulation of the argument apselect_%d/newap_text_%d leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in Trend Micro Apex One (on-premise) management console could allow a pre-authenticated remote attacker to upload malicious code and execute commands on affected installations. This vulnerability is essentially the same as CVE-2025-54948 but targets a different CPU architecture.

In GenieACS 1.2.x before 1.2.8, the UI interface API is vulnerable to unauthenticated OS command injection via the ping host argument (lib/ui/api.ts and lib/ping.ts). The vulnerability arises from insufficient input validation combined with a missing authorization check.

A Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetNetworkTomographySettings.php of D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin because backticks can be used for command injection when judging whether it is a reasonable domain name.

An Improper Neutralization of Special Elements (in an OS command) issue was discovered in Geutebruck IP Camera G-Cam/EFD-2250 Version 1.11.0.12. An improper neutralization of special elements vulnerability has been identified. If special elements are not properly neutralized, an attacker can call multiple parameters that can allow access to the root level operating system which could allow remote code execution.

CodeIgniter is a PHP full-stack web framework. A command injection vulnerability present in versions prior to 4.6.2 affects applications that use the ImageMagick handler for image processing (`imagick` as the image library) and either allow file uploads with user-controlled filenames and process uploaded images using the `resize()` method or use the `text()` method with user-controlled text content or options. An attacker can upload a file with a malicious filename containing shell metacharacters that get executed when the image is processed or provide malicious text content or options that get executed when adding text to images Users should upgrade to v4.6.2 or later to receive a patch. As a workaround, switch to the GD image handler (`gd`, the default handler), which is not affected by either vulnerability. For file upload scenarios, instead of using user-provided filenames, generate random names to eliminate the attack vector with `getRandomName()` when using the `move()` method, or use the `store()` method, which automatically generates safe filenames. For text operations, if one must use ImageMagick with user-controlled text, sanitize the input to only allow safe characters and validate/restrict text options.

JetBrains TeamCity before 2021.2.3 was vulnerable to OS command injection in the Agent Push feature configuration.

tinyfiledialogs (aka tiny file dialogs) before 3.15.0 allows shell metacharacters (such as a backquote or a dollar sign) in titles, messages, and other input data. NOTE: this issue exists because of an incomplete fix for CVE-2020-36767, which only considered single and double quote characters.

tdpServer on TP-Link Archer A7 AC1750 devices before 201029 allows remote attackers to execute arbitrary code via the slave_mac parameter. NOTE: this issue exists because of an incomplete fix for CVE-2020-10882 in which shell quotes are mishandled.

An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. One can escape from a shell and acquire root privileges by leveraging the TFTP download configuration.

A vulnerability has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this vulnerability is the function RP_UpgradeFWByBBS of the file /goform/RP_UpgradeFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Zeroshell 3.9.3 contains a command injection vulnerability in the /cgi-bin/kerbynet StartSessionSubmit parameter that could allow an unauthenticated attacker to execute a system command by using shell metacharacters and the %0a character.

DELL EMC Avamar Server, versions 19.1, 19.2, 19.3, contain an OS Command Injection Vulnerability in Fitness Analyzer. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS with high privileges. This vulnerability is considered critical as it can be leveraged to completely compromise the vulnerable application as well as the underlying operating system. Dell recommends customers to upgrade at the earliest opportunity.

This affects all versions of package corenlp-js-prefab. The injection point is located in line 10 in 'index.js.' It depends on a vulnerable package 'corenlp-js-interface.' Vulnerability can be exploited with the following PoC:

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetUSBShareInfo. This vulnerability allows attackers to execute arbitrary commands via the usbOrdinaryUserName parameter.

totolink a3100r V5.9c.4577 is vulnerable to os command injection. The backend of a page is executing the "ping" command, and the input field does not adequately filter special symbols. This can lead to command injection attacks.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this vulnerability is the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.