User Enumeration via Discrepancies in Error Messages in the Celk Sistemas Celk Saude v.3.1.252.1 password recovery functionality which allows a remote attacker to enumerate users through discrepancies in the responses.

IBM TXSeries for Multiplatforms 9.1 and 11.1 could allow an attacker to enumerate usernames due to an observable login attempt response discrepancy.

Dependency-Track is a Component Analysis platform that allows organizations to identify and reduce risk in the software supply chain. Performing a login request against the /api/v1/user/login endpoint with a username that exist in the system takes significantly longer than performing the same action with a username that is not known by the system. The observable difference in request duration can be leveraged by actors to enumerate valid names of managed users. LDAP and OpenID Connect users are not affected. The issue has been fixed in Dependency-Track 4.12.2.

An issue was discovered in Kurmi Provisioning Suite before 7.9.0.35, 7.10.x through 7.10.0.18, and 7.11.x through 7.11.0.15. An Observable Response Discrepancy vulnerability in the sendPasswordReinitLink action of the unlogged.do page allows remote attackers to test whether a username is valid or not. This allows confirmation of valid usernames.

Accounts enumeration vulnerability in the Login Component of Reolink Duo 2 WiFi Camera (Firmware Version v3.0.0.1889_23031701) allows remote attackers to determine valid user accounts via login attempts. This can lead to the enumeration of user accounts and potentially facilitate other attacks, such as brute-forcing of passwords. The vulnerability arises from the application responding differently to login attempts with valid and invalid usernames.

Zabbix through 4.4.0alpha1 allows User Enumeration. With login requests, it is possible to enumerate application usernames based on the variability of server responses (e.g., the "Login name or password is incorrect" and "No permissions for system access" messages, or just blocking for a number of seconds). This affects both api_jsonrpc.php and index.php.

Zitadel is an open source identity management system. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". Due to a implementation change to prevent deadlocks calling the database, the flag would not be correctly respected in all cases and an attacker would gain information if an account exist within ZITADEL, since the error message shows "object not found" instead of the generic error message. This vulnerability is fixed in 2.58.1, 2.57.1, 2.56.2, 2.55.5, 2.54.8, and 2.53.9.

In veilid-core in Veilid before 0.3.4, the protocol's ping function can be misused in a way that decreases the effectiveness of safety and private routes.

IBM TXSeries for Multiplatforms 10.1 could allow an attacker to determine valid usernames due to an observable timing discrepancy which could be used in further attacks against the system.

In NocoDB, versions 0.9 to 0.83.8 are vulnerable to Observable Discrepancy in the password-reset feature. When requesting a password reset for a given email address, the application displays an error message when the email isn't registered within the system. This allows attackers to enumerate the registered users' email addresses.

A vulnerability in the web-based management interface of Cisco ECE could allow an unauthenticated, remote attacker to perform a username enumeration attack against an affected device. This vulnerability is due to differences in authentication responses that are sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to an affected device. A successful exploit could allow the attacker to confirm existing user accounts, which could be used in further attacks. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability in the TLS handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain access to sensitive information. This vulnerability is due to improper implementation of countermeasures against a Bleichenbacher attack on a device that uses SSL decryption policies. An attacker could exploit this vulnerability by sending crafted TLS messages to an affected device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device.

A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to perform a timing attack. This vulnerability is due to insufficient protection of a system password. An attacker could exploit this vulnerability by observing the time it takes the system to respond to various queries. A successful exploit could allow the attacker to determine a sensitive system password.

All CODESYS Visualization versions before V4.2.0.0 generate a login dialog vulnerable to information exposure allowing a remote, unauthenticated attacker to enumerate valid users.

Observable discrepancies in the login process allow an attacker to guess legitimate user names registered in the BMC. This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

The password-reset form in ServiceNow Orlando provides different responses to invalid authentication attempts depending on whether the username exists.

In Cibele Thinfinity VirtualUI before 3.0, /changePassword returns different responses for invalid authentication requests depending on whether the username exists.

A user enumeration vulnerability in MELAG FTP Server 2.2.0.4 allows an attacker to identify valid FTP usernames.

IBM Security Identity Manager 7.0.2 could allow a remote user to enumerate usernames due to a difference of responses from valid and invalid login attempts. IBM X-Force ID: 200018

In Directus 8.x through 8.8.1, an attacker can discover whether a user is present in the database through the password reset feature. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

GNU GRUB (aka GRUB2) through 2.12 does not use a constant-time algorithm for grub_crypto_memcmp and thus allows side-channel attacks.

Dalmark Systems Systeam 2.22.8 build 1724 is vulnerable to User enumeration. The Systeam application is an ERP system that uses a mixed architecture based on SaaS tenant and user management, and on-premise database and web application counterparts. This issue occurs during the identification of the correct tenant for a given user, where a difference in messages could allow an attacker to determine if the given user is valid or not, enabling a brute force attack with valid users.

Crypto++ (aka Cryptopp) 8.6.0 and earlier contains a timing leakage in MakePublicKey(). There is a clear correlation between execution time and private key length, which may cause disclosure of the length information of the private key. This might allow attackers to conduct timing attacks. NOTE: this report is disputed by the vendor and multiple third parties. The execution-time differences are intentional. A user may make a choice of a longer key as a tradeoff between strength and performance. In making this choice, the amount of information leaked to an adversary is of infinitesimal value

Combodo iTop is a simple, web based IT Service Management tool. Unauthenticated user can perform users enumeration, which can make it easier to bruteforce a valid account. As a fix the sentence displayed after resetting password no longer shows if the user exists or not. This fix is included in versions 2.7.11, 3.0.5, 3.1.2, and 3.2.0. Users are advised to upgrade. Users unable to upgrade may overload the dictionary entry `"UI:ResetPwd-Error-WrongLogin"` through an extension and replace it with a generic message.

A vulnerability has been identified in Polarion V2310 (All versions), Polarion V2404 (All versions < V2404.2). The login implementation of the affected application contains an observable response discrepancy vulnerability when validating usernames. This could allow an unauthenticated remote attacker to distinguish between valid and invalid usernames.

CyberArk Identity 21.5.131, when handling an invalid authentication attempt, sometimes reveals whether the username is valid. In certain authentication policy configurations with MFA, the API response length can be used to differentiate between a valid user and an invalid one (aka Username Enumeration). Response differentiation enables attackers to enumerate usernames of valid application users. Attackers can use this information to leverage brute-force and dictionary attacks in order to discover valid account information such as passwords.

A Observable Response Discrepancy vulnerability in spacewalk-java of SUSE Manager Server 4.1, SUSE Manager Server 4.2 allows remote attackers to discover valid usernames. This issue affects: SUSE Manager Server 4.1 spacewalk-java versions prior to 4.1.46-1. SUSE Manager Server 4.2 spacewalk-java versions prior to 4.2.37-1.

In Talend Administration Center 7.3.1.20200219 before TAC-15950, the Forgot Password feature provides different error messages for invalid reset attempts depending on whether the email address is associated with any account. This allows remote attackers to enumerate accounts via a series of requests.

ZimaOS is a fork of CasaOS, an operating system for Zima devices and x86-64 systems with UEFI. In version 1.2.4 and all prior versions, the API endpoint `http://<Server-IP>/v1/users/login` in ZimaOS returns distinct responses based on whether a username exists or the password is incorrect. This behavior can be exploited for username enumeration, allowing attackers to determine whether a user exists in the system or not. Attackers can leverage this information in further attacks, such as credential stuffing or targeted password brute-forcing. As of time of publication, no known patched versions are available.

Observable behavioral discrepancy vulnerability in QSAN Storage Manager allows remote attackers to obtain the system information without permissions. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

SummaryThis advisory addresses a security vulnerability in Mautic related to the "Forget your password" functionality. This vulnerability could be exploited by unauthenticated users to enumerate valid usernames. User Enumeration via Timing Attack: A user enumeration vulnerability exists in the "Forget your password" functionality. Differences in response times for existing and non-existing users, combined with a lack of request limiting, allow an attacker to determine the existence of usernames through a timing-based attack. MitigationPlease update to a version that addresses this timing vulnerability, where password reset responses are normalized to respond at the same time regardless of user existence.

An issue was discovered in Django v5.1.1, v5.0.9, and v4.2.16. The django.contrib.auth.forms.PasswordResetForm class, when used in a view implementing password reset flows, allows remote attackers to enumerate user e-mail addresses by sending password reset requests and observing the outcome (only when e-mail sending is consistently failing).

Fides is an open-source privacy engineering platform. Prior to version 2.44.0, a timing-based username enumeration vulnerability exists in Fides Webserver authentication. This vulnerability allows an unauthenticated attacker to determine the existence of valid usernames by analyzing the time it takes for the server to respond to login requests. The discrepancy in response times between valid and invalid usernames can be leveraged to enumerate users on the system. This vulnerability enables a timing-based username enumeration attack. An attacker can systematically guess and verify which usernames are valid by measuring the server's response time to authentication requests. This information can be used to conduct further attacks on authentication such as password brute-forcing and credential stuffing. The vulnerability has been patched in Fides version `2.44.0`. Users are advised to upgrade to this version or later to secure their systems against this threat. There are no workarounds.

Loway - CWE-204: Observable Response Discrepancy

An exposure of sensitive information vulnerability exists in TCExam <= 14.8.1. If a password reset request was made for an email address that was not registered with a user then we would be presented with an ‘unknown email’ error. If an email is given that is registered with a user then this error will not appear. A malicious actor could abuse this to enumerate the email addresses of

ManageEngine ADSelfService Plus below build 6116 contains an observable response discrepancy in the UMCP operation of the ChangePasswordAPI. This allows an unauthenticated remote attacker to determine whether a Windows domain user exists.

An issue was discovered in One Identity Password Manager 5.8. An attacker could enumerate valid answers for a user. It is possible for an attacker to detect a valid answer based on the HTTP response content, and reuse this answer later for a password reset on a chosen password. The enumeration is possible because, within the HTTP response content, WRONG ID is only returned when the answer is incorrect.

SonicOS SSLVPN login page allows a remote unauthenticated attacker to perform firewall management administrator username enumeration based on the server responses. This vulnerability affected SonicOS Gen 5 version 5.9.1.7, 5.9.1.13, Gen 6 version 6.5.4.7, 6.5.1.12, 6.0.5.3, SonicOSv 6.5.4.v and Gen 7 version SonicOS 7.0.0.0.

The PlexTrac platform prior to version 1.28.0 allows for username enumeration via HTTP response times on invalid login attempts for users configured to use the PlexTrac authentication provider. Login attempts for valid, unlocked users configured to use PlexTrac as their authentication provider take significantly longer than those for invalid users, allowing for valid users to be enumerated by an unauthenticated remote attacker. Note that the lockout policy implemented in Plextrac version 1.17.0 makes it impossible to distinguish between valid, locked user accounts and user accounts that do not exist, but does not prevent valid, unlocked users from being enumerated.