A vulnerability was found in D-Link DIR-513 up to 1.10 and classified as critical. This issue affects the function formSetWanL2TPcallback of the file /goform/formSetWanL2TPtriggers of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Tenda FH1203 V2.0.1.6 was discovered to contain a stack overflow via the deviceId parameter in the formSetClientState function.

A stack-based buffer overflow in processCommandUploadSnapshot in libcommon.so in Petwant PF-103 firmware 4.22.2.42 and Petalk AI 3.2.2.30 allows remote attackers to cause denial of service or run arbitrary code as the root user.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSetACLFilter.

Tenda AC18 V15.03.3.10_EN was discovered to contain a stack-based buffer overflow vulnerability via the deviceId parameter at ip/goform/addWifiMacFilter.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSetRoute.

Controller DoS due to stack overflow when decoding a message from the server.  See Honeywell Security Notification for recommendations on upgrading and versioning.

An issue was discovered in prog.cgi on D-Link DIR-878 1.30B08 devices. Because strcat is misused, there is a stack-based buffer overflow that does not require authentication.

Tenda AX3 V16.03.12.11 was discovered to contain a stack overflow via the timeType function at /goform/SetSysTimeCfg.

TightVNC code version 1.3.10 contains heap buffer overflow in rfbServerCutText handler, which can potentially result code execution.. This attack appear to be exploitable via network connectivity.

A heap overflow flaw was found in the Linux kernel, all versions 3.x.x and 4.x.x before 4.18.0, in Marvell WiFi chip driver. The vulnerability allows a remote attacker to cause a system crash, resulting in a denial of service, or execute arbitrary code. The highest threat with this vulnerability is with the availability of the system. If code execution occurs, the code will run with the permissions of root. This will affect both confidentiality and integrity of files on the system.

A vulnerability was found in Tenda AC20 16.03.08.12. This vulnerability affects the function save_virtualser_data of the file /goform/formSetVirtualSer. The manipulation of the argument list leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A flaw was found with the RHSA-2019:3950 erratum, where it did not fix the CVE-2019-13616 SDL vulnerability. This issue only affects Red Hat SDL packages, SDL versions through 1.2.15 and 2.x through 2.0.9 has a heap-based buffer overflow flaw while copying an existing surface into a new optimized one, due to a lack of validation while loading a BMP image, is possible. An application that uses SDL to parse untrusted input files may be vulnerable to this flaw, which could allow an attacker to make the application crash or execute code.

In WAGO I/O-Check Service in multiple products an attacker can send a specially crafted packet containing OS commands to crash the diagnostic tool and write memory.

A heap-based buffer overflow vulnerability was found in the Linux kernel, version kernel-2.6.32, in Marvell WiFi chip driver. A remote attacker could cause a denial of service (system crash) or, possibly execute arbitrary code, when the lbs_ibss_join_existing function is called after a STA connects to an AP.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the config.smtp_email_subject parameter at /goform/formSetEmail.

Copying RTCP messages into the output buffer without checking the destination buffer size which could lead to a remote stack overflow when processing large data or non-standard feedback messages in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, Kamorta, MDM9150, MDM9206, MDM9207C, MDM9607, MDM9615, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SA415M, SC7180, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SM6150, SM7150, SM8150, SXR1130

In BCMFASTPATH of dhd_msgbuf.c, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

Out of bound write can happen due to lack of check of array index value while parsing SDP attribute for SAR in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wearables in APQ8053, APQ8096AU, Kamorta, MDM9607, MDM9640, MDM9650, MSM8905, MSM8909, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, Nicobar, QCM2150, QCS605, QM215, Rennell, SA415M, SC7180, SC8180X, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX24, SM6150, SM7150, SM8150, SXR1130

Experion server DoS due to heap overflow occurring during the handling of a specially crafted message for a specific configuration operation.  See Honeywell Security Notification for recommendations on upgrading and versioning.

Tenda AC18 V15.03.05.19 is vulnerable to Buffer Overflow via /goform/fromSetWirelessRepeat.

In circ_read of link_device_memory_legacy.c, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

VIVOTEK IP Camera devices with firmware before 0x20x have a stack-based buffer overflow via a crafted HTTP header.

An issue was discovered in Marvell 88W8688 Wi-Fi firmware before version p52, as used on Tesla Model S/X vehicles manufactured before March 2018, via the Parrot Faurecia Automotive FC6050W module. A stack overflow could lead to denial of service or arbitrary code execution.

A Buffer Overflow in Thrift command handlers in IDEMIA Morpho Wave Compact and VisionPass devices before 2.6.2, Sigma devices before 4.9.4, and MA VP MD devices before 4.9.7 allows remote attackers to achieve code execution, denial of services, and information disclosure via TCP/IP packets.

In MatrixSSL 3.8.3 Open through 4.2.1 Open, the DTLS server mishandles incoming network messages leading to a heap-based buffer overflow of up to 256 bytes and possible Remote Code Execution in parseSSLHandshake in sslDecode.c. During processing of a crafted packet, the server mishandles the fragment length value provided in the DTLS message.

Ricoh SP C250DN 1.05 devices allow denial of service (issue 2 of 3). Unauthenticated crafted packets to the IPP service will cause a vulnerable device to crash. A memory corruption has been identified in the way of how the embedded device parsed the IPP packets

An issue was discovered in Marvell 88W8688 Wi-Fi firmware before version p52, as used on Tesla Model S/X vehicles manufactured before March 2018, via the Parrot Faurecia Automotive FC6050W module. A heap-based buffer overflow allows remote attackers to cause a denial of service or execute arbitrary code via malformed Wi-Fi packets.

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Stack-based Buffer Overflow vulnerability in cachekey plugin of Apache Traffic Server. This issue affects Apache Traffic Server 7.0.0 to 7.1.12, 8.0.0 to 8.1.1, 9.0.0 to 9.0.1.

D-Link DAP-1330_OSS-firmware_1.00b21 was discovered to contain a heap overflow via the devicename parameter in /goform/setDeviceSettings.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the lanip parameter in /goform/setNetworkLan.

In wl_notify_rx_mgmt_frame of wl_cfg80211.c, there is a possible out of bounds write due to an integer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Wazuh is a free and open source platform used for threat prevention, detection, and response. There is a buffer overflow hazard in wazuh-analysisd when handling Unicode characters from Windows Eventchannel messages. It impacts Wazuh Manager 3.8.0 and above. This vulnerability is fixed in Wazuh Manager 4.7.2.

Some Brother printers (such as the HL-L8360CDW v1.20) were affected by a heap buffer overflow vulnerability as the IPP service did not parse attribute names properly. This would allow an attacker to execute arbitrary code on the device.

Stack-based overflow vulnerability in the logMess function in Open TFTP Server MT 1.65 and earlier allows remote attackers to perform a denial of service or execute arbitrary code via a long TFTP error packet, a different vulnerability than CVE-2018-10387 and CVE-2019-12568.

An issue was discovered in json-c from 20200420 (post 0.14 unreleased code) through 0.15-20200726. A stack-buffer-overflow exists in the auxiliary sample program json_parse which is located in the function parseit.

tsMuxer v2.6.16 was discovered to contain a heap-based buffer overflow via the function BitStreamReader::getCurVal in bitStream.h.

An issue was discovered in Squid through 4.7. When handling the tag esi:when when ESI is enabled, Squid calls ESIExpression::Evaluate. This function uses a fixed stack buffer to hold the expression while it's being evaluated. When processing the expression, it could either evaluate the top of the stack, or add a new member to the stack. When adding a new member, there is no check to ensure that the stack won't overflow.

A heap buffer overflow bug in libpl_droidsonroids_gif before 1.2.19, as used in WhatsApp for Android before version 2.19.291 could allow remote attackers to execute arbitrary code or cause a denial of service.

udp_gro_receive_segment in net/ipv4/udp_offload.c in the Linux kernel 5.x before 5.0.13 allows remote attackers to cause a denial of service (slab-out-of-bounds memory corruption) or possibly have unspecified other impact via UDP packets with a 0 payload, because of mishandling of padded packets, aka the "GRO packet of death" issue.

Tenda AC1206 V15.03.06.23 and AC10 V15.03.06.47 were discovered to contain a stack overflow in the deviceId parameter in the saveParentControlInfo function.

Matrix libolm before 3.2.3 allows a malicious Matrix homeserver to crash a client (while it is attempting to retrieve an Olm encrypted room key backup from the homeserver) because olm_pk_decrypt has a stack-based buffer overflow. Remote code execution might be possible for some nonstandard build configurations.

Memory Corruption in Data Modem while making a MO call or MT VOLTE call.