In the Linux kernel, the following vulnerability has been resolved: smb: client: fix warning in cifs_smb3_do_mount() This fixes the following warning reported by kernel test robot fs/smb/client/cifsfs.c:982 cifs_smb3_do_mount() warn: possible memory leak of 'cifs_sb'

In the Linux kernel, the following vulnerability has been resolved: perf trace: Really free the evsel->priv area In 3cb4d5e00e037c70 ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1".

In the Linux kernel, the following vulnerability has been resolved: net: skb_partial_csum_set() fix against transport header magic value skb->transport_header uses the special 0xFFFF value to mark if the transport header was set or not. We must prevent callers to accidentaly set skb->transport_header to 0xFFFF. Note that only fuzzers can possibly do this today. syzbot reported: WARNING: CPU: 0 PID: 2340 at include/linux/skbuff.h:2847 skb_transport_offset include/linux/skbuff.h:2956 [inline] WARNING: CPU: 0 PID: 2340 at include/linux/skbuff.h:2847 virtio_net_hdr_to_skb+0xbcc/0x10c0 include/linux/virtio_net.h:103 Modules linked in: CPU: 0 PID: 2340 Comm: syz-executor.0 Not tainted 6.3.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 RIP: 0010:skb_transport_header include/linux/skbuff.h:2847 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:2956 [inline] RIP: 0010:virtio_net_hdr_to_skb+0xbcc/0x10c0 include/linux/virtio_net.h:103 Code: 41 39 df 0f 82 c3 04 00 00 48 8b 7c 24 10 44 89 e6 e8 08 6e 59 ff 48 85 c0 74 54 e8 ce 36 7e fc e9 37 f8 ff ff e8 c4 36 7e fc <0f> 0b e9 93 f8 ff ff 44 89 f7 44 89 e6 e8 32 38 7e fc 45 39 e6 0f RSP: 0018:ffffc90004497880 EFLAGS: 00010293 RAX: ffffffff84fea55c RBX: 000000000000ffff RCX: ffff888120be2100 RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff RBP: ffffc90004497990 R08: ffffffff84fe9de5 R09: 0000000000000034 R10: ffffea00048ebd80 R11: 0000000000000034 R12: ffff88811dc2d9c8 R13: dffffc0000000000 R14: ffff88811dc2d9ae R15: 1ffff11023b85b35 FS: 00007f9211a59700(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200002c0 CR3: 00000001215a5000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> packet_snd net/packet/af_packet.c:3076 [inline] packet_sendmsg+0x4590/0x61a0 net/packet/af_packet.c:3115 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] __sys_sendto+0x472/0x630 net/socket.c:2144 __do_sys_sendto net/socket.c:2156 [inline] __se_sys_sendto net/socket.c:2152 [inline] __x64_sys_sendto+0xe5/0x100 net/socket.c:2152 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f9210c8c169 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9211a59168 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9210dabf80 RCX: 00007f9210c8c169 RDX: 000000000000ffed RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 00007f9210ce7ca1 R08: 0000000020000540 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe135d65cf R14: 00007f9211a59300 R15: 0000000000022000

In the Linux kernel, the following vulnerability has been resolved: octeontx2-vf: Add missing free for alloc_percpu Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid memory leak, same as the "pf->hw.lmt_info" in `drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Remove the /proc/scsi/${proc_name} directory earlier Remove the /proc/scsi/${proc_name} directory earlier to fix a race condition between unloading and reloading kernel modules. This fixes a bug introduced in 2009 by commit 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core"). Fix the following kernel warning: proc_dir_entry 'scsi/scsi_debug' already registered WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0 Call Trace: proc_mkdir+0xb5/0xe0 scsi_proc_hostdir_add+0xb5/0x170 scsi_host_alloc+0x683/0x6c0 sdebug_driver_probe+0x6b/0x2d0 [scsi_debug] really_probe+0x159/0x540 __driver_probe_device+0xdc/0x230 driver_probe_device+0x4f/0x120 __device_attach_driver+0xef/0x180 bus_for_each_drv+0xe5/0x130 __device_attach+0x127/0x290 device_initial_probe+0x17/0x20 bus_probe_device+0x110/0x130 device_add+0x673/0xc80 device_register+0x1e/0x30 sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug] scsi_debug_init+0x64f/0x1000 [scsi_debug] do_one_initcall+0xd7/0x470 do_init_module+0xe7/0x330 load_module+0x122a/0x12c0 __do_sys_finit_module+0x124/0x1a0 __x64_sys_finit_module+0x46/0x50 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: accel/habanalabs: postpone mem_mgr IDR destruction to hpriv_release() The memory manager IDR is currently destroyed when user releases the file descriptor. However, at this point the user context might be still held, and memory buffers might be still in use. Later on, calls to release those buffers will fail due to not finding their handles in the IDR, leading to a memory leak. To avoid this leak, split the IDR destruction from the memory manager fini, and postpone it to hpriv_release() when there is no user context and no buffers are used.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix memory leak in WMI firmware stats Memory allocated for firmware pdev, vdev and beacon statistics are not released during rmmod. Fix it by calling ath11k_fw_stats_free() function before hardware unregister. While at it, avoid calling ath11k_fw_stats_free() while processing the firmware stats received in the WMI event because the local list is getting spliced and reinitialised and hence there are no elements in the list after splicing. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: lpc32xx_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix memory leak in rtw_usb_probe() drivers/net/wireless/realtek/rtw88/usb.c:876 rtw_usb_probe() warn: 'hw' from ieee80211_alloc_hw() not released on lines: 811 Fix this by modifying return to a goto statement.

In the Linux kernel, the following vulnerability has been resolved: scsi: snic: Fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: kernel/printk/index.c: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

A memory leak flaw was found in the Linux kernel’s DMA subsystem, in the way a user calls DMA_FROM_DEVICE. This flaw allows a local user to read random memory from the kernel space.

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: bcm63xx_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: tracing: Free error logs of tracing instances When a tracing instance is removed, the error messages that hold errors that occurred in the instance needs to be freed. The following reports a memory leak: # cd /sys/kernel/tracing # mkdir instances/foo # echo 'hist:keys=x' > instances/foo/events/sched/sched_switch/trigger # cat instances/foo/error_log [ 117.404795] hist:sched:sched_switch: error: Couldn't find field Command: hist:keys=x ^ # rmdir instances/foo Then check for memory leaks: # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff88810d8ec700 (size 192): comm "bash", pid 869, jiffies 4294950577 (age 215.752s) hex dump (first 32 bytes): 60 dd 68 61 81 88 ff ff 60 dd 68 61 81 88 ff ff `.ha....`.ha.... a0 30 8c 83 ff ff ff ff 26 00 0a 00 00 00 00 00 .0......&....... backtrace: [<00000000dae26536>] kmalloc_trace+0x2a/0xa0 [<00000000b2938940>] tracing_log_err+0x277/0x2e0 [<000000004a0e1b07>] parse_atom+0x966/0xb40 [<0000000023b24337>] parse_expr+0x5f3/0xdb0 [<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560 [<00000000293a9645>] trigger_process_regex+0x135/0x1a0 [<000000005c22b4f2>] event_trigger_write+0x87/0xf0 [<000000002cadc509>] vfs_write+0x162/0x670 [<0000000059c3b9be>] ksys_write+0xca/0x170 [<00000000f1cddc00>] do_syscall_64+0x3e/0xc0 [<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff888170c35a00 (size 32): comm "bash", pid 869, jiffies 4294950577 (age 215.752s) hex dump (first 32 bytes): 0a 20 20 43 6f 6d 6d 61 6e 64 3a 20 68 69 73 74 . Command: hist 3a 6b 65 79 73 3d 78 0a 00 00 00 00 00 00 00 00 :keys=x......... backtrace: [<000000006a747de5>] __kmalloc+0x4d/0x160 [<000000000039df5f>] tracing_log_err+0x29b/0x2e0 [<000000004a0e1b07>] parse_atom+0x966/0xb40 [<0000000023b24337>] parse_expr+0x5f3/0xdb0 [<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560 [<00000000293a9645>] trigger_process_regex+0x135/0x1a0 [<000000005c22b4f2>] event_trigger_write+0x87/0xf0 [<000000002cadc509>] vfs_write+0x162/0x670 [<0000000059c3b9be>] ksys_write+0xca/0x170 [<00000000f1cddc00>] do_syscall_64+0x3e/0xc0 [<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc The problem is that the error log needs to be freed when the instance is removed.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential memleak in dasd_eckd_init() `dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it also needs to be freed before the error returns, just like the other cases in this function.

In the Linux kernel, the following vulnerability has been resolved: ubi: Fix unreferenced object reported by kmemleak in ubi_resize_volume() There is a memory leaks problem reported by kmemleak: unreferenced object 0xffff888102007a00 (size 128): comm "ubirsvol", pid 32090, jiffies 4298464136 (age 2361.231s) hex dump (first 32 bytes): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa02a9a36>] ubi_eba_create_table+0x76/0x170 [ubi] [<ffffffffa029764e>] ubi_resize_volume+0x1be/0xbc0 [ubi] [<ffffffffa02a3321>] ubi_cdev_ioctl+0x701/0x1850 [ubi] [<ffffffff81975d2d>] __x64_sys_ioctl+0x11d/0x170 [<ffffffff83c142a5>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 This is due to a mismatch between create and destroy interfaces, and in detail that "new_eba_tbl" created by ubi_eba_create_table() but destroyed by kfree(), while will causing "new_eba_tbl->entries" not freed. Fix it by replacing kfree(new_eba_tbl) with ubi_eba_destroy_table(new_eba_tbl)

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path Prior to this patch in case mlx5_core_destroy_cq() failed it returns without completing all destroy operations and that leads to memory leak. Instead, complete the destroy flow before return error. Also move mlx5_debug_cq_remove() to the beginning of mlx5_core_destroy_cq() to be symmetrical with mlx5_core_create_cq(). kmemleak complains on: unreferenced object 0xc000000038625100 (size 64): comm "ethtool", pid 28301, jiffies 4298062946 (age 785.380s) hex dump (first 32 bytes): 60 01 48 94 00 00 00 c0 b8 05 34 c3 00 00 00 c0 `.H.......4..... 02 00 00 00 00 00 00 00 00 db 7d c1 00 00 00 c0 ..........}..... backtrace: [<000000009e8643cb>] add_res_tree+0xd0/0x270 [mlx5_core] [<00000000e7cb8e6c>] mlx5_debug_cq_add+0x5c/0xc0 [mlx5_core] [<000000002a12918f>] mlx5_core_create_cq+0x1d0/0x2d0 [mlx5_core] [<00000000cef0a696>] mlx5e_create_cq+0x210/0x3f0 [mlx5_core] [<000000009c642c26>] mlx5e_open_cq+0xb4/0x130 [mlx5_core] [<0000000058dfa578>] mlx5e_ptp_open+0x7f4/0xe10 [mlx5_core] [<0000000081839561>] mlx5e_open_channels+0x9cc/0x13e0 [mlx5_core] [<0000000009cf05d4>] mlx5e_switch_priv_channels+0xa4/0x230 [mlx5_core] [<0000000042bbedd8>] mlx5e_safe_switch_params+0x14c/0x300 [mlx5_core] [<0000000004bc9db8>] set_pflag_tx_port_ts+0x9c/0x160 [mlx5_core] [<00000000a0553443>] mlx5e_set_priv_flags+0xd0/0x1b0 [mlx5_core] [<00000000a8f3d84b>] ethnl_set_privflags+0x234/0x2d0 [<00000000fd27f27c>] genl_family_rcv_msg_doit+0x108/0x1d0 [<00000000f495e2bb>] genl_family_rcv_msg+0xe4/0x1f0 [<00000000646c5c2c>] genl_rcv_msg+0x78/0x120 [<00000000d53e384e>] netlink_rcv_skb+0x74/0x1a0

In the Linux kernel, the following vulnerability has been resolved: libbpf: Fix memory leak in strset Free struct strset itself, not just its internal parts.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential memory leak in DMUB hw_init [Why] On resume we perform DMUB hw_init which allocates memory: dm_resume->dm_dmub_hw_init->dc_dmub_srv_create->kzalloc That results in memory leak in suspend/resume scenarios. [How] Allocate memory for the DC wrapper to DMUB only if it was not allocated before. No need to reallocate it on suspend/resume.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: Fix a memleak from userdata error path in new objects Release object name if userdata allocation fails.

In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: fix minor-number leak on probe errors Make sure to release the allocated minor number before returning on probe errors.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix page reclaim for dead peer hairpin When adding a hairpin flow, a firmware-side send queue is created for the peer net device, which claims some host memory pages for its internal ring buffer. If the peer net device is removed/unbound before the hairpin flow is deleted, then the send queue is not destroyed which leads to a stack trace on pci device remove: [ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource [ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110 [ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0 [ 748.002171] ------------[ cut here ]------------ [ 748.001177] FW pages counter is 4 after reclaiming all pages [ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core] [ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1 [ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9 [ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286 [ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000 [ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51 [ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8 [ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30 [ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000 [ 748.001429] FS: 00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000 [ 748.001695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0 [ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 748.001654] Call Trace: [ 748.000576] ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core] [ 748.001416] ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core] [ 748.001354] ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core] [ 748.001203] mlx5_function_teardown+0x30/0x60 [mlx5_core] [ 748.001275] mlx5_uninit_one+0xa7/0xc0 [mlx5_core] [ 748.001200] remove_one+0x5f/0xc0 [mlx5_core] [ 748.001075] pci_device_remove+0x9f/0x1d0 [ 748.000833] device_release_driver_internal+0x1e0/0x490 [ 748.001207] unbind_store+0x19f/0x200 [ 748.000942] ? sysfs_file_ops+0x170/0x170 [ 748.001000] kernfs_fop_write_iter+0x2bc/0x450 [ 748.000970] new_sync_write+0x373/0x610 [ 748.001124] ? new_sync_read+0x600/0x600 [ 748.001057] ? lock_acquire+0x4d6/0x700 [ 748.000908] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 748.001126] ? fd_install+0x1c9/0x4d0 [ 748.000951] vfs_write+0x4d0/0x800 [ 748.000804] ksys_write+0xf9/0x1d0 [ 748.000868] ? __x64_sys_read+0xb0/0xb0 [ 748.000811] ? filp_open+0x50/0x50 [ 748.000919] ? syscall_enter_from_user_mode+0x1d/0x50 [ 748.001223] do_syscall_64+0x3f/0x80 [ 748.000892] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 748.00 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix kmemleak in watchdog_cdev_register kmemleak reports memory leaks in watchdog_dev_register, as follows: unreferenced object 0xffff888116233000 (size 2048): comm ""modprobe"", pid 28147, jiffies 4353426116 (age 61.741s) hex dump (first 32 bytes): 80 fa b9 05 81 88 ff ff 08 30 23 16 81 88 ff ff .........0#..... 08 30 23 16 81 88 ff ff 00 00 00 00 00 00 00 00 .0#............. backtrace: [<000000007f001ffd>] __kmem_cache_alloc_node+0x157/0x220 [<000000006a389304>] kmalloc_trace+0x21/0x110 [<000000008d640eea>] watchdog_dev_register+0x4e/0x780 [watchdog] [<0000000053c9f248>] __watchdog_register_device+0x4f0/0x680 [watchdog] [<00000000b2979824>] watchdog_register_device+0xd2/0x110 [watchdog] [<000000001f730178>] 0xffffffffc10880ae [<000000007a1a8bcc>] do_one_initcall+0xcb/0x4d0 [<00000000b98be325>] do_init_module+0x1ca/0x5f0 [<0000000046d08e7c>] load_module+0x6133/0x70f0 ... unreferenced object 0xffff888105b9fa80 (size 16): comm ""modprobe"", pid 28147, jiffies 4353426116 (age 61.741s) hex dump (first 16 bytes): 77 61 74 63 68 64 6f 67 31 00 b9 05 81 88 ff ff watchdog1....... backtrace: [<000000007f001ffd>] __kmem_cache_alloc_node+0x157/0x220 [<00000000486ab89b>] __kmalloc_node_track_caller+0x44/0x1b0 [<000000005a39aab0>] kvasprintf+0xb5/0x140 [<0000000024806f85>] kvasprintf_const+0x55/0x180 [<000000009276cb7f>] kobject_set_name_vargs+0x56/0x150 [<00000000a92e820b>] dev_set_name+0xab/0xe0 [<00000000cec812c6>] watchdog_dev_register+0x285/0x780 [watchdog] [<0000000053c9f248>] __watchdog_register_device+0x4f0/0x680 [watchdog] [<00000000b2979824>] watchdog_register_device+0xd2/0x110 [watchdog] [<000000001f730178>] 0xffffffffc10880ae [<000000007a1a8bcc>] do_one_initcall+0xcb/0x4d0 [<00000000b98be325>] do_init_module+0x1ca/0x5f0 [<0000000046d08e7c>] load_module+0x6133/0x70f0 ... The reason is that put_device is not be called if cdev_device_add fails and wdd->id != 0. watchdog_cdev_register wd_data = kzalloc [1] err = dev_set_name [2] .. err = cdev_device_add if (err) { if (wdd->id == 0) { // wdd->id != 0 .. } return err; // [1],[2] would be leaked To fix it, call put_device in all wdd->id cases.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix a memory leak Add a forgotten kfree().

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix memory leak in alloc_wbufs() kmemleak reported a sequence of memory leaks, and show them as following: unreferenced object 0xffff8881575f8400 (size 1024): comm "mount", pid 19625, jiffies 4297119604 (age 20.383s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa0406b2b>] ubifs_mount+0x307b/0x7170 [ubifs] [<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0 [<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230 [<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0 [<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270 [<ffffffff83c14295>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff8881798a6e00 (size 512): comm "mount", pid 19677, jiffies 4297121912 (age 37.816s) hex dump (first 32 bytes): 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa0418342>] ubifs_wbuf_init+0x52/0x480 [ubifs] [<ffffffffa0406ca5>] ubifs_mount+0x31f5/0x7170 [ubifs] [<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0 [<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230 [<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0 [<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270 [<ffffffff83c14295>] do_syscall_64+0x35/0x80 [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The problem is that the ubifs_wbuf_init() returns an error in the loop which in the alloc_wbufs(), then the wbuf->buf and wbuf->inodes that were successfully alloced before are not freed. Fix it by adding error hanging path in alloc_wbufs() which frees the memory alloced before when ubifs_wbuf_init() returns an error.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Fix memory leak in rtw88_usb Kmemleak shows the following leak arising from routine in the usb probe routine: unreferenced object 0xffff895cb29bba00 (size 512): comm "(udev-worker)", pid 534, jiffies 4294903932 (age 102751.088s) hex dump (first 32 bytes): 77 30 30 30 00 00 00 00 02 2f 2d 2b 30 00 00 00 w000...../-+0... 02 00 2a 28 00 00 00 00 ff 55 ff ff ff 00 00 00 ..*(.....U...... backtrace: [<ffffffff9265fa36>] kmalloc_trace+0x26/0x90 [<ffffffffc17eec41>] rtw_usb_probe+0x2f1/0x680 [rtw_usb] [<ffffffffc03e19fd>] usb_probe_interface+0xdd/0x2e0 [usbcore] [<ffffffff92b4f2fe>] really_probe+0x18e/0x3d0 [<ffffffff92b4f5b8>] __driver_probe_device+0x78/0x160 [<ffffffff92b4f6bf>] driver_probe_device+0x1f/0x90 [<ffffffff92b4f8df>] __driver_attach+0xbf/0x1b0 [<ffffffff92b4d350>] bus_for_each_dev+0x70/0xc0 [<ffffffff92b4e51e>] bus_add_driver+0x10e/0x210 [<ffffffff92b50935>] driver_register+0x55/0xf0 [<ffffffffc03e0708>] usb_register_driver+0x88/0x140 [usbcore] [<ffffffff92401153>] do_one_initcall+0x43/0x210 [<ffffffff9254f42a>] do_init_module+0x4a/0x200 [<ffffffff92551d1c>] __do_sys_finit_module+0xac/0x120 [<ffffffff92ee6626>] do_syscall_64+0x56/0x80 [<ffffffff9300006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The leak was verified to be real by unloading the driver, which resulted in a dangling pointer to the allocation. The allocated memory is freed in rtw_usb_intf_deinit().

In the Linux kernel, the following vulnerability has been resolved: perf bpf: Avoid memory leak from perf_env__insert_btf() perf_env__insert_btf() doesn't insert if a duplicate BTF id is encountered and this causes a memory leak. Modify the function to return a success/error value and then free the memory if insertion didn't happen. v2. Adds a return -1 when the insertion error occurs in perf_env__fetch_btf. This doesn't affect anything as the result is never checked.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/devfreq: Fix OPP refcnt leak

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix memory leak in nvmet_alloc_ctrl() When creating ctrl in nvmet_alloc_ctrl(), if the cntlid_min is larger than cntlid_max of the subsystem, and jumps to the "out_free_changed_ns_list" label, but the ctrl->sqs lack of be freed. Fix this by jumping to the "out_free_sqs" label.

In the Linux kernel, the following vulnerability has been resolved: media: staging/intel-ipu3: Fix memory leak in imu_fmt We are losing the reference to an allocated memory if try. Change the order of the check to avoid that.

In the Linux kernel, the following vulnerability has been resolved: memory: fsl_ifc: fix leak of private memory on probe failure On probe error the driver should free the memory allocated for private structure. Fix this by using resource-managed allocation.

In the Linux kernel, the following vulnerability has been resolved: net: caif: fix memory leak in caif_device_notify In case of caif_enroll_dev() fail, allocated link_support won't be assigned to the corresponding structure. So simply free allocated pointer in case of error

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix mpi3mr_hba_port memory leak in mpi3mr_remove() Free mpi3mr_hba_port at .remove.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: delete timer and free skb queue when unloading Fix possible crash and memory leak on driver unload by deleting TX purge timer and freeing C2H queue in 'rtw_core_deinit()', shrink critical section in the latter by freeing COEX queue out of TX report lock scope.

In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Fix memory leak among suspend/resume procedure The vblk->vqs should be freed before we call init_vqs() in virtblk_restore().

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: fix zcard and zqueue hot-unplug memleak Tests with kvm and a kmemdebug kernel showed, that on hot unplug the zcard and zqueue structs for the unplugged card or queue are not properly freed because of a mismatch with get/put for the embedded kref counter. This fix now adjusts the handling of the kref counters. With init the kref counter starts with 1. This initial value needs to drop to zero with the unregister of the card or queue to trigger the release and free the object.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_read_fifo: fix memory leak in error branch In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details.

In the Linux kernel, the following vulnerability has been resolved: net: cdc_eem: fix tx fixup skb leak when usbnet transmit a skb, eem fixup it in eem_tx_fixup(), if skb_copy_expand() failed, it return NULL, usbnet_start_xmit() will have no chance to free original skb. fix it by free orginal skb in eem_tx_fixup() first, then check skb clone status, if failed, return NULL to usbnet.

In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: fix memory leak in mcba_usb Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c

In the Linux kernel, the following vulnerability has been resolved: cassini: Fix a memory leak in the error handling path of cas_init_one() cas_saturn_firmware_init() allocates some memory using vmalloc(). This memory is freed in the .remove() function but not it the error handling path of the probe. Add the missing vfree() to avoid a memory leak, should an error occur.

In the Linux kernel, the following vulnerability has been resolved: NFC: st21nfca: Fix memory leak in device probe and remove 'phy->pending_skb' is alloced when device probe, but forgot to free in the error handling path and remove path, this cause memory leak as follows: unreferenced object 0xffff88800bc06800 (size 512): comm "8", pid 11775, jiffies 4295159829 (age 9.032s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d66c09ce>] __kmalloc_node_track_caller+0x1ed/0x450 [<00000000c93382b3>] kmalloc_reserve+0x37/0xd0 [<000000005fea522c>] __alloc_skb+0x124/0x380 [<0000000019f29f9a>] st21nfca_hci_i2c_probe+0x170/0x8f2 Fix it by freeing 'pending_skb' in error and remove.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in ext4_mb_init_backend on error path. Fix a memory leak discovered by syzbot when a file system is corrupted with an illegally large s_log_groups_per_flex.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/kms/nv50-: fix file release memory leak When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()' All error handling paths lead to 'out' where many resources are freed. Do it as well here instead of a direct return, otherwise 'log', 'ra' and 'log->one_page_buf' (at least) will leak.

In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix a memory leak in error handling paths If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be updated and 'hv_uio_cleanup()' in the error handling path will not be able to free the corresponding buffer. In such a case, we need to free the buffer explicitly.

In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove When ACPI type is ACPI_SMO8500, the data->dready_trig will not be set, the memory allocated by iio_triggered_buffer_setup() will not be freed, and cause memory leak as follows: unreferenced object 0xffff888009551400 (size 512): comm "i2c-SMO8500-125", pid 911, jiffies 4294911787 (age 83.852s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 20 e2 e5 c0 ff ff ff ff ........ ....... backtrace: [<0000000041ce75ee>] kmem_cache_alloc_trace+0x16d/0x360 [<000000000aeb17b0>] iio_kfifo_allocate+0x41/0x130 [kfifo_buf] [<000000004b40c1f5>] iio_triggered_buffer_setup_ext+0x2c/0x210 [industrialio_triggered_buffer] [<000000004375b15f>] kxcjk1013_probe+0x10c3/0x1d81 [kxcjk_1013] Fix it by remove data->dready_trig condition in probe and remove.

In the Linux kernel, the following vulnerability has been resolved: samples/landlock: Fix path_list memory leak Clang static analysis reports this error sandboxer.c:134:8: warning: Potential leak of memory pointed to by 'path_list' ret = 0; ^ path_list is allocated in parse_path() but never freed.

In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: es58x_rx_err_msg(): fix memory leak in error path In es58x_rx_err_msg(), if can->do_set_mode() fails, the function directly returns without calling netif_rx(skb). This means that the skb previously allocated by alloc_can_err_skb() is not freed. In other terms, this is a memory leak. This patch simply removes the return statement in the error branch and let the function continue. Issue was found with GCC -fanalyzer, please follow the link below for details.