In the Linux kernel, the following vulnerability has been resolved: crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak Using completion_done to determine whether the caller has gone away only works after a complete call. Furthermore it's still possible that the caller has not yet called wait_for_completion, resulting in another potential UAF. Fix this by making the caller use cancel_work_sync and then freeing the memory safely.

In the Linux kernel, the following vulnerability has been resolved: bpf: Use correct permission flag for mixed signed bounds arithmetic We forbid adding unknown scalars with mixed signed bounds due to the spectre v1 masking mitigation. Hence this also needs bypass_spec_v1 flag instead of allow_ptr_leaks.

In the Linux kernel, the following vulnerability has been resolved: ionic: fix kernel panic in XDP_TX action In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8 R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100 FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x254/0x790 ? __pfx_page_fault_oops+0x10/0x10 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? search_bpf_extables+0x165/0x260 ? fixup_exception+0x4a/0x970 ? exc_page_fault+0xcb/0xe0 ? asm_exc_page_fault+0x22/0x30 ? 0xffffffffc0051f64 ? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f ? do_raw_spin_unlock+0x54/0x220 ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x7e7/0xc30 ? __pfx_net_rx_action+0x10/0x10

In the Linux kernel, the following vulnerability has been resolved: um: Add winch to winch_handlers before registering winch IRQ Registering a winch IRQ is racy, an interrupt may occur before the winch is added to the winch_handlers list. If that happens, register_winch_irq() adds to that list a winch that is scheduled to be (or has already been) freed, causing a panic later in winch_cleanup(). Avoid the race by adding the winch to the winch_handlers list before registering the IRQ, and rolling back if um_request_irq() fails.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix netif state handling mlx5e_suspend cleans resources only if netif_device_present() returns true. However, mlx5e_resume changes the state of netif, via mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED. In the below case, the above leads to NULL-ptr Oops[1] and memory leaks: mlx5e_probe _mlx5e_resume mlx5e_attach_netdev mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach() register_netdev <-- failed for some reason. ERROR_FLOW: _mlx5e_suspend <-- netif_device_present return false, resources aren't freed :( Hence, clean resources in this case as well. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at0xffffffffffffffd6. RSP: 0018:ffff888178aaf758 EFLAGS: 00010246 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x14c/0x3c0 ? exc_page_fault+0x75/0x140 ? asm_exc_page_fault+0x22/0x30 notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core] mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib] mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib] __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe1/0x210 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x637/0x840 __auxiliary_device_add+0x3b/0xa0 add_adev+0xc9/0x140 [mlx5_core] mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core] mlx5_register_device+0x53/0xa0 [mlx5_core] mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x44c/0x730 [mlx5_core] local_pci_probe+0x3e/0x90 pci_device_probe+0xbf/0x210 ? kernfs_create_link+0x5d/0xa0 ? sysfs_do_create_link_sd+0x60/0xc0 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 pci_bus_add_device+0x54/0x80 pci_iov_add_virtfn+0x2e6/0x320 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 kernfs_fop_write_iter+0x10c/0x1a0 vfs_write+0x291/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 CR2: 0000000000000000 ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix handling of dissolved but not taken off from buddy pages When I did memory failure tests recently, below panic occurs: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00 flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff) raw: 06fffe0000000000 dead000000000100 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000009 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(!PageBuddy(page)) ------------[ cut here ]------------ kernel BUG at include/linux/page-flags.h:1009! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:__del_page_from_free_list+0x151/0x180 RSP: 0018:ffffa49c90437998 EFLAGS: 00000046 RAX: 0000000000000035 RBX: 0000000000000009 RCX: ffff8dd8dfd1c9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff8dd8dfd1c9c0 RBP: ffffd901233b8000 R08: ffffffffab5511f8 R09: 0000000000008c69 R10: 0000000000003c15 R11: ffffffffab5511f8 R12: ffff8dd8fffc0c80 R13: 0000000000000001 R14: ffff8dd8fffc0c80 R15: 0000000000000009 FS: 00007ff916304740(0000) GS:ffff8dd8dfd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055eae50124c8 CR3: 00000008479e0000 CR4: 00000000000006f0 Call Trace: <TASK> __rmqueue_pcplist+0x23b/0x520 get_page_from_freelist+0x26b/0xe40 __alloc_pages_noprof+0x113/0x1120 __folio_alloc_noprof+0x11/0xb0 alloc_buddy_hugetlb_folio.isra.0+0x5a/0x130 __alloc_fresh_hugetlb_folio+0xe7/0x140 alloc_pool_huge_folio+0x68/0x100 set_max_huge_pages+0x13d/0x340 hugetlb_sysctl_handler_common+0xe8/0x110 proc_sys_call_handler+0x194/0x280 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xc2/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff916114887 RSP: 002b:00007ffec8a2fd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000055eae500e350 RCX: 00007ff916114887 RDX: 0000000000000004 RSI: 000055eae500e390 RDI: 0000000000000003 RBP: 000055eae50104c0 R08: 0000000000000000 R09: 000055eae50104c0 R10: 0000000000000077 R11: 0000000000000246 R12: 0000000000000004 R13: 0000000000000004 R14: 00007ff916216b80 R15: 00007ff916216a00 </TASK> Modules linked in: mce_inject hwpoison_inject ---[ end trace 0000000000000000 ]--- And before the panic, there had an warning about bad page state: BUG: Bad page state in process page-types pfn:8cee00 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00 flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff) page_type: 0xffffff7f(buddy) raw: 06fffe0000000000 ffffd901241c0008 ffffd901240f8008 0000000000000000 raw: 0000000000000000 0000000000000009 00000000ffffff7f 0000000000000000 page dumped because: nonzero mapcount Modules linked in: mce_inject hwpoison_inject CPU: 8 PID: 154211 Comm: page-types Not tainted 6.9.0-rc4-00499-g5544ec3178e2-dirty #22 Call Trace: <TASK> dump_stack_lvl+0x83/0xa0 bad_page+0x63/0xf0 free_unref_page+0x36e/0x5c0 unpoison_memory+0x50b/0x630 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xcd/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xc2/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f189a514887 RSP: 002b:00007ffdcd899718 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f189a514887 RDX: 0000000000000009 RSI: 00007ffdcd899730 RDI: 0000000000000003 RBP: 00007ffdcd8997a0 R08: 0000000000000000 R09: 00007ffdcd8994b2 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcda199a8 R13: 0000000000404af1 R14: 000000000040ad78 R15: 00007f189a7a5040 </TASK> The root cause should be the below race: memory_failure try_memory_failure_hugetlb me_huge_page __page_handle_poison dissolve_free_hugetlb_folio drain_all_pages -- Buddy page can be isolated e.g. for compaction. take_page_off_buddy -- Failed as page is not in the ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix peer devlink set for SF representor devlink port The cited patch change register devlink flow, and neglect to reflect the changes for peer devlink set logic. Peer devlink set is triggering a call trace if done after devl_register.[1] Hence, align peer devlink set logic with register devlink flow. [1] WARNING: CPU: 4 PID: 3394 at net/devlink/core.c:155 devlink_rel_nested_in_add+0x177/0x180 CPU: 4 PID: 3394 Comm: kworker/u40:1 Not tainted 6.9.0-rc4_for_linust_min_debug_2024_04_16_14_08 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_vhca_event0 mlx5_vhca_state_work_handler [mlx5_core] RIP: 0010:devlink_rel_nested_in_add+0x177/0x180 Call Trace: <TASK> ? __warn+0x78/0x120 ? devlink_rel_nested_in_add+0x177/0x180 ? report_bug+0x16d/0x180 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_port_init+0x30/0x30 ? devlink_port_type_clear+0x50/0x50 ? devlink_rel_nested_in_add+0x177/0x180 ? devlink_rel_nested_in_add+0xdd/0x180 mlx5_sf_mdev_event+0x74/0xb0 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_sf_dev_probe+0x185/0x3e0 [mlx5_core] auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x64f/0x860 __auxiliary_device_add+0x3b/0xa0 mlx5_sf_dev_add+0x139/0x330 [mlx5_core] mlx5_sf_dev_state_change_handler+0x1e4/0x250 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core] process_one_work+0x13f/0x2e0 worker_thread+0x2bd/0x3c0 ? rescuer_thread+0x410/0x410 kthread+0xc4/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK>

In the Linux kernel, the following vulnerability has been resolved: media: v4l: async: Fix notifier list entry init struct v4l2_async_notifier has several list_head members, but only waiting_list and done_list are initialized. notifier_entry was kept 'zeroed' leading to an uninitialized list_head. This results in a NULL-pointer dereference if csi2_async_register() fails, e.g. node for remote endpoint is disabled, and returns -ENOTCONN. The following calls to v4l2_async_nf_unregister() results in a NULL pointer dereference. Add the missing list head initializer.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix overwriting ct original tuple for ICMPv6 OVS_PACKET_CMD_EXECUTE has 3 main attributes: - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. - OVS_PACKET_ATTR_PACKET - Binary packet content. - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure with the metadata like conntrack state, input port, recirculation id, etc. Then the packet itself gets parsed to populate the rest of the keys from the packet headers. Whenever the packet parsing code starts parsing the ICMPv6 header, it first zeroes out fields in the key corresponding to Neighbor Discovery information even if it is not an ND packet. It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares the space between 'nd' and 'ct_orig' that holds the original tuple conntrack metadata parsed from the OVS_PACKET_ATTR_KEY. ND packets should not normally have conntrack state, so it's fine to share the space, but normal ICMPv6 Echo packets or maybe other types of ICMPv6 can have the state attached and it should not be overwritten. The issue results in all but the last 4 bytes of the destination address being wiped from the original conntrack tuple leading to incorrect packet matching and potentially executing wrong actions in case this packet recirculates within the datapath or goes back to userspace. ND fields should not be accessed in non-ND packets, so not clearing them should be fine. Executing memset() only for actual ND packets to avoid the issue. Initializing the whole thing before parsing is needed because ND packet may not contain all the options. The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't affect packets entering OVS datapath from network interfaces, because in this case CT metadata is populated from skb after the packet is already parsed.

In the Linux kernel, the following vulnerability has been resolved: eventfs: Fix a possible null pointer dereference in eventfs_find_events() In function eventfs_find_events,there is a potential null pointer that may be caused by calling update_events_attr which will perform some operations on the members of the ei struct when ei is NULL. Hence,When ei->is_freed is set,return NULL directly.

In the Linux kernel, the following vulnerability has been resolved: serial: max3100: Lock port->lock when calling uart_handle_cts_change() uart_handle_cts_change() has to be called with port lock taken, Since we run it in a separate work, the lock may not be taken at the time of running. Make sure that it's taken by explicitly doing that. Without it we got a splat: WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0 ... Workqueue: max3100-0 max3100_work [max3100] RIP: 0010:uart_handle_cts_change+0xa6/0xb0 ... max3100_handlerx+0xc5/0x110 [max3100] max3100_work+0x12a/0x340 [max3100]

In the Linux kernel, the following vulnerability has been resolved: wifi: ar5523: enable proper endpoint verification Syzkaller reports [1] hitting a warning about an endpoint in use not having an expected type to it. Fix the issue by checking for the existence of all proper endpoints with their according types intact. Sadly, this patch has not been tested on real hardware. [1] Syzkaller report: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 3643 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> ar5523_cmd+0x41b/0x780 drivers/net/wireless/ath/ar5523/ar5523.c:275 ar5523_cmd_read drivers/net/wireless/ath/ar5523/ar5523.c:302 [inline] ar5523_host_available drivers/net/wireless/ath/ar5523/ar5523.c:1376 [inline] ar5523_probe+0x14b0/0x1d10 drivers/net/wireless/ath/ar5523/ar5523.c:1655 usb_probe_interface+0x30f/0x7f0 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:560 [inline] really_probe+0x249/0xb90 drivers/base/dd.c:639 __driver_probe_device+0x1df/0x4d0 drivers/base/dd.c:778 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:808 __device_attach_driver+0x1d4/0x2e0 drivers/base/dd.c:936 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:427 __device_attach+0x1e4/0x530 drivers/base/dd.c:1008 bus_probe_device+0x1e8/0x2a0 drivers/base/bus.c:487 device_add+0xbd9/0x1e90 drivers/base/core.c:3517 usb_set_configuration+0x101d/0x1900 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0xbe/0x100 drivers/usb/core/generic.c:238 usb_probe_device+0xd8/0x2c0 drivers/usb/core/driver.c:293 call_driver_probe drivers/base/dd.c:560 [inline] really_probe+0x249/0xb90 drivers/base/dd.c:639 __driver_probe_device+0x1df/0x4d0 drivers/base/dd.c:778 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:808 __device_attach_driver+0x1d4/0x2e0 drivers/base/dd.c:936 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:427 __device_attach+0x1e4/0x530 drivers/base/dd.c:1008 bus_probe_device+0x1e8/0x2a0 drivers/base/bus.c:487 device_add+0xbd9/0x1e90 drivers/base/core.c:3517 usb_new_device.cold+0x685/0x10ad drivers/usb/core/hub.c:2573 hub_port_connect drivers/usb/core/hub.c:5353 [inline] hub_port_connect_change drivers/usb/core/hub.c:5497 [inline] port_event drivers/usb/core/hub.c:5653 [inline] hub_event+0x26cb/0x45d0 drivers/usb/core/hub.c:5735 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK>

An issue was discovered in the Linux kernel through 5.16-rc6. kfd_parse_subtype_iolink in drivers/gpu/drm/amd/amdkfd/kfd_crat.c lacks check of the return value of kmemdup().

In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: add a proper sanity check for endpoints Syzkaller reports [1] hitting a warning which is caused by presence of a wrong endpoint type at the URB sumbitting stage. While there was a check for a specific 4th endpoint, since it can switch types between bulk and interrupt, other endpoints are trusted implicitly. Similar warning is triggered in a couple of other syzbot issues [2]. Fix the issue by doing a comprehensive check of all endpoints taking into account difference between high- and full-speed configuration. [1] Syzkaller report: ... WARNING: CPU: 0 PID: 4721 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> carl9170_usb_send_rx_irq_urb+0x273/0x340 drivers/net/wireless/ath/carl9170/usb.c:504 carl9170_usb_init_device drivers/net/wireless/ath/carl9170/usb.c:939 [inline] carl9170_usb_firmware_finish drivers/net/wireless/ath/carl9170/usb.c:999 [inline] carl9170_usb_firmware_step2+0x175/0x240 drivers/net/wireless/ath/carl9170/usb.c:1028 request_firmware_work_func+0x130/0x240 drivers/base/firmware_loader/main.c:1107 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> [2] Related syzkaller crashes:

In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Set lower bound of start tick time Currently ALSA timer doesn't have the lower limit of the start tick time, and it allows a very small size, e.g. 1 tick with 1ns resolution for hrtimer. Such a situation may lead to an unexpected RCU stall, where the callback repeatedly queuing the expire update, as reported by fuzzer. This patch introduces a sanity check of the timer start tick time, so that the system returns an error when a too small start size is set. As of this patch, the lower limit is hard-coded to 100us, which is small enough but can still work somehow.

In the Linux kernel, the following vulnerability has been resolved: media: mgb4: Fix double debugfs remove Fixes an error where debugfs_remove_recursive() is called first on a parent directory and then again on a child which causes a kernel panic. [hverkuil: added Fixes/Cc tags]

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tsens: Fix null pointer dereference compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c) as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null pointer dereference (if DEBUG or DYNAMIC_DEBUG set). Fix this bug by adding null pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/qcom/lmh: Check for SCM availability at probe Up until now, the necessary scm availability check has not been performed, leading to possible null pointer dereferences (which did happen for me on RB1). Fix that.

In the Linux kernel, the following vulnerability has been resolved: ALSA: Fix deadlocks with kctl removals at disconnection In snd_card_disconnect(), we set card->shutdown flag at the beginning, call callbacks and do sync for card->power_ref_sleep waiters at the end. The callback may delete a kctl element, and this can lead to a deadlock when the device was in the suspended state. Namely: * A process waits for the power up at snd_power_ref_and_wait() in snd_ctl_info() or read/write() inside card->controls_rwsem. * The system gets disconnected meanwhile, and the driver tries to delete a kctl via snd_ctl_remove*(); it tries to take card->controls_rwsem again, but this is already locked by the above. Since the sleeper isn't woken up, this deadlocks. An easy fix is to wake up sleepers before processing the driver disconnect callbacks but right after setting the card->shutdown flag. Then all sleepers will abort immediately, and the code flows again. So, basically this patch moves the wait_event() call at the right timing. While we're at it, just to be sure, call wait_event_all() instead of wait_event(), although we don't use exclusive events on this queue for now.

In the Linux kernel, the following vulnerability has been resolved: macintosh/via-macii: Fix "BUG: sleeping function called from invalid context" The via-macii ADB driver calls request_irq() after disabling hard interrupts. But disabling interrupts isn't necessary here because the VIA shift register interrupt was masked during VIA1 initialization.

In the Linux kernel, the following vulnerability has been resolved: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() irq_find_at_or_after() dereferences the interrupt descriptor which is returned by mt_find() while neither holding sparse_irq_lock nor RCU read lock, which means the descriptor can be freed between mt_find() and the dereference: CPU0 CPU1 desc = mt_find() delayed_free_desc(desc) irq_desc_get_irq(desc) The use-after-free is reported by KASAN: Call trace: irq_get_next_irq+0x58/0x84 show_stat+0x638/0x824 seq_read_iter+0x158/0x4ec proc_reg_read_iter+0x94/0x12c vfs_read+0x1e0/0x2c8 Freed by task 4471: slab_free_freelist_hook+0x174/0x1e0 __kmem_cache_free+0xa4/0x1dc kfree+0x64/0x128 irq_kobj_release+0x28/0x3c kobject_put+0xcc/0x1e0 delayed_free_desc+0x14/0x2c rcu_do_batch+0x214/0x720 Guard the access with a RCU read lock section.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix a potential ttm->sg memory leak Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr, but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it!

In the Linux kernel, the following vulnerability has been resolved: clk: bcm: rpi: Assign ->num before accessing ->hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in raspberrypi_discover_clocks() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4 index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning.

In the Linux kernel, the following vulnerability has been resolved: memory: renesas-rpc-if: fix possible NULL pointer dereference of resource The platform_get_resource_byname() can return NULL which would be immediately dereferenced by resource_size(). Instead dereference it after validating the resource. Addresses-Coverity: Dereference null return value

In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset() pci_alloc_irq_vectors() allocates an irq vector. When devm_add_action() fails, the irq vector is not freed, which leads to a memory leak. Replace the devm_add_action with devm_add_action_or_reset to ensure the irq vector can be destroyed when it fails.

In the Linux kernel, the following vulnerability has been resolved: mmc: davinci: Don't strip remove function when driver is builtin Using __exit for the remove function results in the remove callback being discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g. using sysfs or hotplug), the driver is just removed without the cleanup being performed. This results in resource leaks. Fix it by compiling in the remove callback unconditionally. This also fixes a W=1 modpost warning: WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in reference: davinci_mmcsd_driver+0x10 (section: .data) -> davinci_mmcsd_remove (section: .exit.text)

In the Linux kernel, the following vulnerability has been resolved: net: hso: fix null-ptr-deref during tty device unregistration Multiple ttys try to claim the same the minor number causing a double unregistration of the same device. The first unregistration succeeds but the next one results in a null-ptr-deref. The get_free_serial_index() function returns an available minor number but doesn't assign it immediately. The assignment is done by the caller later. But before this assignment, calls to get_free_serial_index() would return the same minor number. Fix this by modifying get_free_serial_index to assign the minor number immediately after one is found to be and rename it to obtain_minor() to better reflect what it does. Similary, rename set_serial_by_index() to release_minor() and modify it to free up the minor number of the given hso_serial. Every obtain_minor() should have corresponding release_minor() call.

In the Linux kernel, the following vulnerability has been resolved: crypto: bcm - Fix pointer arithmetic In spu2_dump_omd() value of ptr is increased by ciph_key_len instead of hash_iv_len which could lead to going beyond the buffer boundaries. Fix this bug by changing ciph_key_len to hash_iv_len. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Modify the print level of CQE error Too much print may lead to a panic in kernel. Change ibdev_err() to ibdev_err_ratelimited(), and change the printing level of cqe dump to debug level.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Remove HCI_AMP support Since BT_HS has been remove HCI_AMP controllers no longer has any use so remove it along with the capability of creating AMP controllers. Since we no longer need to differentiate between AMP and Primary controllers, as only HCI_PRIMARY is left, this also remove hdev->dev_type altogether.

In the Linux kernel, the following vulnerability has been resolved: mm, slub: fix potential memoryleak in kmem_cache_open() In error path, the random_seq of slub cache might be leaked. Fix this by using __kmem_cache_release() to release all the relevant resources.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix deadlock on SRQ async events. xa_lock for SRQ table may be required in AEQ. Use xa_store_irq()/ xa_erase_irq() to avoid deadlock.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Remove WO permissions on second-level paging entries When the first level page table is used for IOVA translation, it only supports Read-Only and Read-Write permissions. The Write-Only permission is not supported as the PRESENT bit (implying Read permission) should always set. When using second level, we still give separate permissions that allows WriteOnly which seems inconsistent and awkward. We want to have consistent behavior. After moving to 1st level, we don't want things to work sometimes, and break if we use 2nd level for the same mappings. Hence remove this configuration.

An issue was discovered in the Linux kernel through 5.16-rc6. mtk_vcodec_fw_vpu_init in drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c lacks check of the return value of devm_kzalloc() and will cause the null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm: bridge: cdns-mhdp8546: Fix possible null pointer dereference In cdns_mhdp_atomic_enable(), the return value of drm_mode_duplicate() is assigned to mhdp_state->current_mode, and there is a dereference of it in drm_mode_set_name(), which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Fix this bug add a check of mhdp_state->current_mode.

In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix unbalanced device enable/disable in suspend/resume pci_disable_device() called in __ixgbe_shutdown() decreases dev->enable_cnt by 1. pci_enable_device_mem() which increases dev->enable_cnt by 1, was removed from ixgbe_resume() in commit 6f82b2558735 ("ixgbe: use generic power management"). This caused unbalanced increase/decrease. So add pci_enable_device_mem() back. Fix the following call trace. ixgbe 0000:17:00.1: disabling already-disabled device Call Trace: __ixgbe_shutdown+0x10a/0x1e0 [ixgbe] ixgbe_suspend+0x32/0x70 [ixgbe] pci_pm_suspend+0x87/0x160 ? pci_pm_freeze+0xd0/0xd0 dpm_run_callback+0x42/0x170 __device_suspend+0x114/0x460 async_suspend+0x1f/0xa0 async_run_entry_fn+0x3c/0xf0 process_one_work+0x1dd/0x410 worker_thread+0x34/0x3f0 ? cancel_delayed_work+0x90/0x90 kthread+0x14c/0x170 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: eth: sungem: remove .ndo_poll_controller to avoid deadlocks Erhard reports netpoll warnings from sungem: netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398) WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20c gem_poll_controller() disables interrupts, which may sleep. We can't sleep in netpoll, it has interrupts disabled completely. Strangely, gem_poll_controller() doesn't even poll the completions, and instead acts as if an interrupt has fired so it just schedules NAPI and exits. None of this has been necessary for years, since netpoll invokes NAPI directly.

In the Linux kernel, the following vulnerability has been resolved: block: refine the EOF check in blkdev_iomap_begin blkdev_iomap_begin rounds down the offset to the logical block size before stashing it in iomap->offset and checking that it still is inside the inode size. Check the i_size check to the raw pos value so that we don't try a zero size write if iter->pos is unaligned.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix deadlock in smb2_find_smb_tcon() Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such deadlock.

In the Linux kernel, the following vulnerability has been resolved: crypto: starfive - Do not free stack buffer RSA text data uses variable length buffer allocated in software stack. Calling kfree on it causes undefined behaviour in subsequent operations.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix page fault due to max surface definition mismatch DC driver is using two different values to define the maximum number of surfaces: MAX_SURFACES and MAX_SURFACE_NUM. Consolidate MAX_SURFACES as the unique definition for surface updates across DC. It fixes page fault faced by Cosmic users on AMD display versions that support two overlay planes, since the introduction of cursor overlay mode. [Nov26 21:33] BUG: unable to handle page fault for address: 0000000051d0f08b [ +0.000015] #PF: supervisor read access in kernel mode [ +0.000006] #PF: error_code(0x0000) - not-present page [ +0.000005] PGD 0 P4D 0 [ +0.000007] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 4 PID: 71 Comm: kworker/u32:6 Not tainted 6.10.0+ #300 [ +0.000006] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000007] Workqueue: events_unbound commit_work [drm_kms_helper] [ +0.000040] RIP: 0010:copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000847] Code: 8b 10 49 89 94 24 f8 00 00 00 48 8b 50 08 49 89 94 24 00 01 00 00 8b 40 10 41 89 84 24 08 01 00 00 49 8b 45 78 48 85 c0 74 0b <0f> b6 00 41 88 84 24 90 64 00 00 49 8b 45 60 48 85 c0 74 3b 48 8b [ +0.000010] RSP: 0018:ffffc203802f79a0 EFLAGS: 00010206 [ +0.000009] RAX: 0000000051d0f08b RBX: 0000000000000004 RCX: ffff9f964f0a8070 [ +0.000004] RDX: ffff9f9710f90e40 RSI: ffff9f96600c8000 RDI: ffff9f964f000000 [ +0.000004] RBP: ffffc203802f79f8 R08: 0000000000000000 R09: 0000000000000000 [ +0.000005] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f96600c8000 [ +0.000004] R13: ffff9f9710f90e40 R14: ffff9f964f000000 R15: ffff9f96600c8000 [ +0.000004] FS: 0000000000000000(0000) GS:ffff9f9970000000(0000) knlGS:0000000000000000 [ +0.000005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000005] CR2: 0000000051d0f08b CR3: 00000002e6a20000 CR4: 0000000000350ef0 [ +0.000005] Call Trace: [ +0.000011] <TASK> [ +0.000010] ? __die_body.cold+0x19/0x27 [ +0.000012] ? page_fault_oops+0x15a/0x2d0 [ +0.000014] ? exc_page_fault+0x7e/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000739] ? dc_commit_state_no_check+0xd6c/0xe70 [amdgpu] [ +0.000470] update_planes_and_stream_state+0x49b/0x4f0 [amdgpu] [ +0.000450] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? commit_minimal_transition_state+0x239/0x3d0 [amdgpu] [ +0.000446] update_planes_and_stream_v2+0x24a/0x590 [amdgpu] [ +0.000464] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? sort+0x31/0x50 [ +0.000007] ? amdgpu_dm_atomic_commit_tail+0x159f/0x3a30 [amdgpu] [ +0.000508] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? amdgpu_crtc_get_scanout_position+0x28/0x40 [amdgpu] [ +0.000377] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x160/0x390 [drm] [ +0.000058] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_default_wait+0x8c/0x260 [ +0.000010] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? wait_for_completion_timeout+0x13b/0x170 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_wait_timeout+0x108/0x140 [ +0.000010] ? commit_tail+0x94/0x130 [drm_kms_helper] [ +0.000024] ? process_one_work+0x177/0x330 [ +0.000008] ? worker_thread+0x266/0x3a0 [ +0.000006] ? __pfx_worker_thread+0x10/0x10 [ +0.000004] ? kthread+0xd2/0x100 [ +0.000006] ? __pfx_kthread+0x10/0x10 [ +0.000006] ? ret_from_fork+0x34/0x50 [ +0.000004] ? __pfx_kthread+0x10/0x10 [ +0.000005] ? ret_from_fork_asm+0x1a/0x30 [ +0.000011] </TASK> (cherry picked from commit 1c86c81a86c60f9b15d3e3f43af0363cf56063e7)

In the Linux kernel, the following vulnerability has been resolved: kunit/fortify: Fix mismatched kvalloc()/vfree() usage The kv*() family of tests were accidentally freeing with vfree() instead of kvfree(). Use kvfree() instead.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix potential memory leakage when reading chip temperature Without this commit, reading chip temperature will cause memory leakage.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Assign dummy when codec not specified for a DAI link MediaTek sound card drivers are checking whether a DAI link is present and used on a board to assign the correct parameters and this is done by checking the codec DAI names at probe time. If no real codec is present, assign the dummy codec to the DAI link to avoid NULL pointer during string comparison.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci: fix NULL pointer issue on shared irq case The tcpci_irq() may meet below NULL pointer dereference issue: [ 2.641851] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 2.641951] status 0x1, 0x37f [ 2.650659] Mem abort info: [ 2.656490] ESR = 0x0000000096000004 [ 2.660230] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.665532] SET = 0, FnV = 0 [ 2.668579] EA = 0, S1PTW = 0 [ 2.671715] FSC = 0x04: level 0 translation fault [ 2.676584] Data abort info: [ 2.679459] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 2.684936] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 2.689980] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 2.695284] [0000000000000010] user address but active_mm is swapper [ 2.701632] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 2.707883] Modules linked in: [ 2.710936] CPU: 1 UID: 0 PID: 87 Comm: irq/111-2-0051 Not tainted 6.12.0-rc6-06316-g7f63786ad3d1-dirty #4 [ 2.720570] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 2.726040] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.732989] pc : tcpci_irq+0x38/0x318 [ 2.736647] lr : _tcpci_irq+0x14/0x20 [ 2.740295] sp : ffff80008324bd30 [ 2.743597] x29: ffff80008324bd70 x28: ffff800080107894 x27: ffff800082198f70 [ 2.750721] x26: ffff0000050e6680 x25: ffff000004d172ac x24: ffff0000050f0000 [ 2.757845] x23: ffff000004d17200 x22: 0000000000000001 x21: ffff0000050f0000 [ 2.764969] x20: ffff000004d17200 x19: 0000000000000000 x18: 0000000000000001 [ 2.772093] x17: 0000000000000000 x16: ffff80008183d8a0 x15: ffff00007fbab040 [ 2.779217] x14: ffff00007fb918c0 x13: 0000000000000000 x12: 000000000000017a [ 2.786341] x11: 0000000000000001 x10: 0000000000000a90 x9 : ffff80008324bd00 [ 2.793465] x8 : ffff0000050f0af0 x7 : ffff00007fbaa840 x6 : 0000000000000031 [ 2.800589] x5 : 000000000000017a x4 : 0000000000000002 x3 : 0000000000000002 [ 2.807713] x2 : ffff80008324bd3a x1 : 0000000000000010 x0 : 0000000000000000 [ 2.814838] Call trace: [ 2.817273] tcpci_irq+0x38/0x318 [ 2.820583] _tcpci_irq+0x14/0x20 [ 2.823885] irq_thread_fn+0x2c/0xa8 [ 2.827456] irq_thread+0x16c/0x2f4 [ 2.830940] kthread+0x110/0x114 [ 2.834164] ret_from_fork+0x10/0x20 [ 2.837738] Code: f9426420 f9001fe0 d2800000 52800201 (f9400a60) This may happen on shared irq case. Such as two Type-C ports share one irq. After the first port finished tcpci_register_port(), it may trigger interrupt. However, if the interrupt comes by chance the 2nd port finishes devm_request_threaded_irq(), the 2nd port interrupt handler will run at first. Then the above issue happens due to tcpci is still a NULL pointer in tcpci_irq() when dereference to regmap. devm_request_threaded_irq() <-- port1 irq comes disable_irq(client->irq); tcpci_register_port() This will restore the logic to the state before commit (77e85107a771 "usb: typec: tcpci: support edge irq"). However, moving tcpci_register_port() earlier creates a problem when use edge irq because tcpci_init() will be called before devm_request_threaded_irq(). The tcpci_init() writes the ALERT_MASK to the hardware to tell it to start generating interrupts but we're not ready to deal with them yet, then the ALERT events may be missed and ALERT line will not recover to high level forever. To avoid the issue, this will also set ALERT_MASK register after devm_request_threaded_irq() return.

In the Linux kernel, the following vulnerability has been resolved: media: mc: Fix graph walk in media_pipeline_start The graph walk tries to follow all links, even if they are not between pads. This causes a crash with, e.g. a MEDIA_LNK_FL_ANCILLARY_LINK link. Fix this by allowing the walk to proceed only for MEDIA_LNK_FL_DATA_LINK links.

In the Linux kernel before 4.20.14, expand_downwards in mm/mmap.c lacks a check for the mmap minimum address, which makes it easier for attackers to exploit kernel NULL pointer dereferences on non-SMAP platforms. This is related to a capability check for the wrong task.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind. Hang on to the control IDs instead of pointers since those are correctly handled with locks.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: check for null before dereferencing The wcid can be NULL. It should be checked for validity before dereferencing it to avoid crash.

In the Linux kernel, the following vulnerability has been resolved: xfs: fix log recovery buffer allocation for the legacy h_size fixup Commit a70f9fe52daa ("xfs: detect and handle invalid iclog size set by mkfs") added a fixup for incorrect h_size values used for the initial umount record in old xfsprogs versions. Later commit 0c771b99d6c9 ("xfs: clean up calculation of LR header blocks") cleaned up the log reover buffer calculation, but stoped using the fixed up h_size value to size the log recovery buffer, which can lead to an out of bounds access when the incorrect h_size does not come from the old mkfs tool, but a fuzzer. Fix this by open coding xlog_logrec_hblks and taking the fixed h_size into account for this calculation.