In the Linux kernel, the following vulnerability has been resolved: ax25: fix use-after-free bugs caused by ax25_ds_del_timer When the ax25 device is detaching, the ax25_dev_device_down() calls ax25_ds_del_timer() to cleanup the slave_timer. When the timer handler is running, the ax25_ds_del_timer() that calls del_timer() in it will return directly. As a result, the use-after-free bugs could happen, one of the scenarios is shown below: (Thread 1) | (Thread 2) | ax25_ds_timeout() ax25_dev_device_down() | ax25_ds_del_timer() | del_timer() | ax25_dev_put() //FREE | | ax25_dev-> //USE In order to mitigate bugs, when the device is detaching, use timer_shutdown_sync() to stop the timer.

In the Linux kernel, the following vulnerability has been resolved: rcu/nocb: Fix WARN_ON_ONCE() in the rcu_nocb_bypass_lock() For the kernels built with CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y and CONFIG_RCU_LAZY=y, the following scenarios will trigger WARN_ON_ONCE() in the rcu_nocb_bypass_lock() and rcu_nocb_wait_contended() functions: CPU2 CPU11 kthread rcu_nocb_cb_kthread ksys_write rcu_do_batch vfs_write rcu_torture_timer_cb proc_sys_write __kmem_cache_free proc_sys_call_handler kmemleak_free drop_caches_sysctl_handler delete_object_full drop_slab __delete_object shrink_slab put_object lazy_rcu_shrink_scan call_rcu rcu_nocb_flush_bypass __call_rcu_commn rcu_nocb_bypass_lock raw_spin_trylock(&rdp->nocb_bypass_lock) fail atomic_inc(&rdp->nocb_lock_contended); rcu_nocb_wait_contended WARN_ON_ONCE(smp_processor_id() != rdp->cpu); WARN_ON_ONCE(atomic_read(&rdp->nocb_lock_contended)) | |_ _ _ _ _ _ _ _ _ _same rdp and rdp->cpu != 11_ _ _ _ _ _ _ _ _ __| Reproduce this bug with "echo 3 > /proc/sys/vm/drop_caches". This commit therefore uses rcu_nocb_try_flush_bypass() instead of rcu_nocb_flush_bypass() in lazy_rcu_shrink_scan(). If the nocb_bypass queue is being flushed, then rcu_nocb_try_flush_bypass will return directly.

In the Linux kernel, the following vulnerability has been resolved: raid1: fix use-after-free for original bio in raid1_write_request() r1_bio->bios[] is used to record new bios that will be issued to underlying disks, however, in raid1_write_request(), r1_bio->bios[] will set to the original bio temporarily. Meanwhile, if blocked rdev is set, free_r1bio() will be called causing that all r1_bio->bios[] to be freed: raid1_write_request() r1_bio = alloc_r1bio(mddev, bio); -> r1_bio->bios[] is NULL for (i = 0; i < disks; i++) -> for each rdev in conf // first rdev is normal r1_bio->bios[0] = bio; -> set to original bio // second rdev is blocked if (test_bit(Blocked, &rdev->flags)) break if (blocked_rdev) free_r1bio() put_all_bios() bio_put(r1_bio->bios[0]) -> original bio is freed Test scripts: mdadm -CR /dev/md0 -l1 -n4 /dev/sd[abcd] --assume-clean fio -filename=/dev/md0 -ioengine=libaio -rw=write -bs=4k -numjobs=1 \ -iodepth=128 -name=test -direct=1 echo blocked > /sys/block/md0/md/rd2/state Test result: BUG bio-264 (Not tainted): Object already free ----------------------------------------------------------------------------- Allocated in mempool_alloc_slab+0x24/0x50 age=1 cpu=1 pid=869 kmem_cache_alloc+0x324/0x480 mempool_alloc_slab+0x24/0x50 mempool_alloc+0x6e/0x220 bio_alloc_bioset+0x1af/0x4d0 blkdev_direct_IO+0x164/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 io_submit_one+0x5ca/0xb70 __do_sys_io_submit+0x86/0x270 __x64_sys_io_submit+0x22/0x30 do_syscall_64+0xb1/0x210 entry_SYSCALL_64_after_hwframe+0x6c/0x74 Freed in mempool_free_slab+0x1f/0x30 age=1 cpu=1 pid=869 kmem_cache_free+0x28c/0x550 mempool_free_slab+0x1f/0x30 mempool_free+0x40/0x100 bio_free+0x59/0x80 bio_put+0xf0/0x220 free_r1bio+0x74/0xb0 raid1_make_request+0xadf/0x1150 md_handle_request+0xc7/0x3b0 md_submit_bio+0x76/0x130 __submit_bio+0xd8/0x1d0 submit_bio_noacct_nocheck+0x1eb/0x5c0 submit_bio_noacct+0x169/0xd40 submit_bio+0xee/0x1d0 blkdev_direct_IO+0x322/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 Since that bios for underlying disks are not allocated yet, fix this problem by using mempool_free() directly to free the r1_bio.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix oops when HEVC init fails The stateless HEVC decoder saves the instance pointer in the context regardless if the initialization worked or not. This caused a use after free, when the pointer is freed in case of a failure in the deinit function. Only store the instance pointer when the initialization was successful, to solve this issue. Hardware name: Acer Tomato (rev3 - 4) board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] lr : vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] sp : ffff80008750bc20 x29: ffff80008750bc20 x28: ffff1299f6d70000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff80008750bc98 x22: 000000000000a003 x21: ffffd45c4cfae000 x20: 0000000000000010 x19: ffff1299fd668310 x18: 000000000000001a x17: 000000040044ffff x16: ffffd45cb15dc648 x15: 0000000000000000 x14: ffff1299c08da1c0 x13: ffffd45cb1f87a10 x12: ffffd45cb2f5fe80 x11: 0000000000000001 x10: 0000000000001b30 x9 : ffffd45c4d12b488 x8 : 1fffe25339380d81 x7 : 0000000000000001 x6 : ffff1299c9c06c00 x5 : 0000000000000132 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000010 x1 : ffff80008750bc98 x0 : 0000000000000000 Call trace: vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] vpu_dec_deinit+0x1c/0x30 [mtk_vcodec_dec] vdec_hevc_slice_deinit+0x30/0x98 [mtk_vcodec_dec] vdec_if_deinit+0x38/0x68 [mtk_vcodec_dec] mtk_vcodec_dec_release+0x20/0x40 [mtk_vcodec_dec] fops_vcodec_release+0x64/0x118 [mtk_vcodec_dec] v4l2_release+0x7c/0x100 __fput+0x80/0x2d8 __fput_sync+0x58/0x70 __arm64_sys_close+0x40/0x90 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0xd8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x1a8/0x1b0 Code: d503201f f9401660 b900127f b900227f (f9400400)

A use-after-free vulnerability in the Linux Kernel io_uring subsystem can be exploited to achieve local privilege escalation. Both io_install_fixed_file and its callers call fput in a file in case of an error, causing a reference underflow which leads to a use-after-free vulnerability. We recommend upgrading past commit 9d94c04c0db024922e886c9fd429659f22f48ea4.

A use-after-free vulnerability in the Linux Kernel Performance Events system can be exploited to achieve local privilege escalation. The perf_group_detach function did not check the event's siblings' attach_state before calling add_event_to_groups(), but remove_on_exec made it possible to call list_del_event() on before detaching from their group, making it possible to use a dangling pointer causing a use-after-free vulnerability. We recommend upgrading past commit fd0815f632c24878e325821943edccc7fde947a2.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in fscache_withdraw_volume() We got the following issue in our fault injection stress test: ================================================================== BUG: KASAN: slab-use-after-free in fscache_withdraw_volume+0x2e1/0x370 Read of size 4 at addr ffff88810680be08 by task ondemand-04-dae/5798 CPU: 0 PID: 5798 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #565 Call Trace: kasan_check_range+0xf6/0x1b0 fscache_withdraw_volume+0x2e1/0x370 cachefiles_withdraw_volume+0x31/0x50 cachefiles_withdraw_cache+0x3ad/0x900 cachefiles_put_unbind_pincount+0x1f6/0x250 cachefiles_daemon_release+0x13b/0x290 __fput+0x204/0xa00 task_work_run+0x139/0x230 Allocated by task 5820: __kmalloc+0x1df/0x4b0 fscache_alloc_volume+0x70/0x600 __fscache_acquire_volume+0x1c/0x610 erofs_fscache_register_volume+0x96/0x1a0 erofs_fscache_register_fs+0x49a/0x690 erofs_fc_fill_super+0x6c0/0xcc0 vfs_get_super+0xa9/0x140 vfs_get_tree+0x8e/0x300 do_new_mount+0x28c/0x580 [...] Freed by task 5820: kfree+0xf1/0x2c0 fscache_put_volume.part.0+0x5cb/0x9e0 erofs_fscache_unregister_fs+0x157/0x1b0 erofs_kill_sb+0xd9/0x1c0 deactivate_locked_super+0xa3/0x100 vfs_get_super+0x105/0x140 vfs_get_tree+0x8e/0x300 do_new_mount+0x28c/0x580 [...] ================================================================== Following is the process that triggers the issue: mount failed | daemon exit ------------------------------------------------------------ deactivate_locked_super cachefiles_daemon_release erofs_kill_sb erofs_fscache_unregister_fs fscache_relinquish_volume __fscache_relinquish_volume fscache_put_volume(fscache_volume, fscache_volume_put_relinquish) zero = __refcount_dec_and_test(&fscache_volume->ref, &ref); cachefiles_put_unbind_pincount cachefiles_daemon_unbind cachefiles_withdraw_cache cachefiles_withdraw_volumes list_del_init(&volume->cache_link) fscache_free_volume(fscache_volume) cache->ops->free_volume cachefiles_free_volume list_del_init(&cachefiles_volume->cache_link); kfree(fscache_volume) cachefiles_withdraw_volume fscache_withdraw_volume fscache_volume->n_accesses // fscache_volume UAF !!! The fscache_volume in cache->volumes must not have been freed yet, but its reference count may be 0. So use the new fscache_try_get_volume() helper function try to get its reference count. If the reference count of fscache_volume is 0, fscache_put_volume() is freeing it, so wait for it to be removed from cache->volumes. If its reference count is not 0, call cachefiles_withdraw_volume() with reference count protection to avoid the above issue.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use after free in hci_send_acl This fixes the following trace caused by receiving HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without first checking if conn->type is in fact AMP_LINK and in case it is do properly cleanup upper layers with hci_disconn_cfm: ================================================================== BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50 Read of size 8 at addr ffff88800e404818 by task bluetoothd/142 CPU: 0 PID: 142 Comm: bluetoothd Not tainted 5.17.0-rc5-00006-gda4022eeac1a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 kasan_report.cold+0x7f/0x11b hci_send_acl+0xaba/0xc50 l2cap_do_send+0x23f/0x3d0 l2cap_chan_send+0xc06/0x2cc0 l2cap_sock_sendmsg+0x201/0x2b0 sock_sendmsg+0xdc/0x110 sock_write_iter+0x20f/0x370 do_iter_readv_writev+0x343/0x690 do_iter_write+0x132/0x640 vfs_writev+0x198/0x570 do_writev+0x202/0x280 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015 RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77 R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580 RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001 </TASK> R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0 Allocated by task 45: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 hci_chan_create+0x9a/0x2f0 l2cap_conn_add.part.0+0x1a/0xdc0 l2cap_connect_cfm+0x236/0x1000 le_conn_complete_evt+0x15a7/0x1db0 hci_le_conn_complete_evt+0x226/0x2c0 hci_le_meta_evt+0x247/0x450 hci_event_packet+0x61b/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 Freed by task 45: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xfb/0x130 kfree+0xac/0x350 hci_conn_cleanup+0x101/0x6a0 hci_conn_del+0x27e/0x6c0 hci_disconn_phylink_complete_evt+0xe0/0x120 hci_event_packet+0x812/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88800c0f0500 The buggy address is located 24 bytes inside of which belongs to the cache kmalloc-128 of size 128 The buggy address belongs to the page: 128-byte region [ffff88800c0f0500, ffff88800c0f0580) flags: 0x100000000000200(slab|node=0|zone=1) page:00000000fe45cd86 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xc0f0 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 raw: 0100000000000200 ffffea00003a2c80 dead000000000004 ffff8880078418c0 page dumped because: kasan: bad access detected ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc Memory state around the buggy address: >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ---truncated---

A use-after-free vulnerability in the Linux Kernel io_uring system can be exploited to achieve local privilege escalation. The io_file_get_fixed function lacks the presence of ctx->uring_lock which can lead to a Use-After-Free vulnerability due a race condition with fixed files getting unregistered. We recommend upgrading past commit da24142b1ef9fd5d36b76e36bab328a5b27523e8.

A time-of-check to time-of-use issue exists in io_uring subsystem's IORING_OP_CLOSE operation in the Linux kernel's versions 5.6 - 5.11 (inclusive), which allows a local user to elevate their privileges to root. Introduced in b5dba59e0cf7e2cc4d3b3b1ac5fe81ddf21959eb, patched in 9eac1904d3364254d622bf2c771c4f85cd435fc2, backported to stable in 788d0824269bef539fe31a785b1517882eafed93.

In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free after 802.3ad slave unbind commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del() When l2cap_recv_frame() is invoked to receive data, and the cid is L2CAP_CID_A2MP, if the channel does not exist, it will create a channel. However, after a channel is created, the hold operation of the channel is not performed. In this case, the value of channel reference counting is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del() invokes the close hook function of A2MP to release the channel. Then l2cap_chan_unlock(chan) will trigger UAF issue. The process is as follows: Receive data: l2cap_data_channel() a2mp_channel_create() --->channel ref is 2 l2cap_chan_put() --->channel ref is 1 Triger event: hci_error_reset() hci_dev_do_close() ... l2cap_disconn_cfm() l2cap_conn_del() l2cap_chan_hold() --->channel ref is 2 l2cap_chan_del() --->channel ref is 1 a2mp_chan_close_cb() --->channel ref is 0, release channel l2cap_chan_unlock() --->UAF of channel The detailed Call Trace is as follows: BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0 Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593 Workqueue: hci0 hci_error_reset Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 print_report.cold+0x2ba/0x719 kasan_report+0xb1/0x1e0 kasan_check_range+0x140/0x190 __mutex_unlock_slowpath+0xa6/0x5e0 l2cap_conn_del+0x404/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 7593: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0xa9/0xd0 l2cap_chan_create+0x40/0x930 amp_mgr_create+0x96/0x990 a2mp_channel_create+0x7d/0x150 l2cap_recv_frame+0x51b8/0x9a70 l2cap_recv_acldata+0xaa3/0xc00 hci_rx_work+0x702/0x1220 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Freed by task 7593: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x167/0x1c0 slab_free_freelist_hook+0x89/0x1c0 kfree+0xe2/0x580 l2cap_chan_put+0x22a/0x2d0 l2cap_conn_del+0x3fc/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is aborted A use-after-free crash can occur after an ELS LOGO is aborted. Specifically, a nodelist structure is freed and then ndlp->vport->cfg_log_verbose is dereferenced in lpfc_nlp_get() when the discovery state machine is mistakenly called a second time with NLP_EVT_DEVICE_RM argument. Rework lpfc_cmpl_els_logo() to prevent the duplicate calls to release a nodelist structure.

In the Linux kernel, the following vulnerability has been resolved: srcu: Tighten cleanup_srcu_struct() GP checks Currently, cleanup_srcu_struct() checks for a grace period in progress, but it does not check for a grace period that has not yet started but which might start at any time. Such a situation could result in a use-after-free bug, so this commit adds a check for a grace period that is needed but not yet started to cleanup_srcu_struct().

A use after free vulnerability exists in the ALSA PCM package in the Linux Kernel. SNDRV_CTL_IOCTL_ELEM_{READ|WRITE}32 is missing locks that can be used in a use-after-free that can result in a priviledge escalation to gain ring0 access from the system user. We recommend upgrading past commit 56b88b50565cd8b946a2d00b0c83927b7ebb055e

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait While performing fast composition switch, there is a possibility that the process of ffs_ep0_write/ffs_ep0_read get into a race condition due to ep0req being freed up from functionfs_unbind. Consider the scenario that the ffs_ep0_write calls the ffs_ep0_queue_wait by taking a lock &ffs->ev.waitq.lock. However, the functionfs_unbind isn't bounded so it can go ahead and mark the ep0req to NULL, and since there is no NULL check in ffs_ep0_queue_wait we will end up in use-after-free. Fix this by making a serialized execution between the two functions using a mutex_lock(ffs->mutex).

In the Linux kernel, the following vulnerability has been resolved: udf: Fix a slab-out-of-bounds write bug in udf_find_entry() Syzbot reported a slab-out-of-bounds Write bug: loop0: detected capacity change from 0 to 2048 ================================================================== BUG: KASAN: slab-out-of-bounds in udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253 Write of size 105 at addr ffff8880123ff896 by task syz-executor323/3610 CPU: 0 PID: 3610 Comm: syz-executor323 Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report+0xcd/0x100 mm/kasan/report.c:495 kasan_check_range+0x2a7/0x2e0 mm/kasan/generic.c:189 memcpy+0x3c/0x60 mm/kasan/shadow.c:66 udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253 udf_lookup+0xef/0x340 fs/udf/namei.c:309 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3710 do_filp_open+0x264/0x4f0 fs/namei.c:3740 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ffab0d164d9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe1a7e6bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffab0d164d9 RDX: 00007ffab0d164d9 RSI: 0000000000000000 RDI: 0000000020000180 RBP: 00007ffab0cd5a10 R08: 0000000000000000 R09: 0000000000000000 R10: 00005555573552c0 R11: 0000000000000246 R12: 00007ffab0cd5aa0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 3610: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x3d/0x60 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] __kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380 kmalloc include/linux/slab.h:576 [inline] udf_find_entry+0x7b6/0x14f0 fs/udf/namei.c:243 udf_lookup+0xef/0x340 fs/udf/namei.c:309 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3710 do_filp_open+0x264/0x4f0 fs/namei.c:3740 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff8880123ff800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 150 bytes inside of 256-byte region [ffff8880123ff800, ffff8880123ff900) The buggy address belongs to the physical page: page:ffffea000048ff80 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x123fe head:ffffea000048ff80 order:1 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 ffffea00004b8500 dead000000000003 ffff888012041b40 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0(), pid 1, tgid 1 (swapper/0), ts 1841222404, free_ts 0 create_dummy_stack mm/page_owner.c: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix a buffer overflow in mgmt_mesh_add() Smatch Warning: net/bluetooth/mgmt_util.c:375 mgmt_mesh_add() error: __memcpy() 'mesh_tx->param' too small (48 vs 50) Analysis: 'mesh_tx->param' is array of size 48. This is the destination. u8 param[sizeof(struct mgmt_cp_mesh_send) + 29]; // 19 + 29 = 48. But in the caller 'mesh_send' we reject only when len > 50. len > (MGMT_MESH_SEND_SIZE + 31) // 19 + 31 = 50.

In the Linux kernel, the following vulnerability has been resolved: net: sched: Fix use after free in red_enqueue() We can't use "skb" again after passing it to qdisc_enqueue(). This is basically identical to commit 2f09707d0c97 ("sch_sfb: Also store skb len before calling child enqueue").

In the Linux kernel, the following vulnerability has been resolved: btrfs: always report error in run_one_delayed_ref() Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but if end users hit such problem, there will be no chance that btrfs_debug() is enabled. This can lead to very little useful info for debugging. This patch will: - Add extra info for error reporting Including: * logical bytenr * num_bytes * type * action * ref_mod - Replace the btrfs_debug() with btrfs_err() - Move the error reporting into run_one_delayed_ref() This is to avoid use-after-free, the @node can be freed in the caller. This error should only be triggered at most once. As if run_one_delayed_ref() failed, we trigger the error message, then causing the call chain to error out: btrfs_run_delayed_refs() `- btrfs_run_delayed_refs() `- btrfs_run_delayed_refs_for_head() `- run_one_delayed_ref() And we will abort the current transaction in btrfs_run_delayed_refs(). If we have to run delayed refs for the abort transaction, run_one_delayed_ref() will just cleanup the refs and do nothing, thus no new error messages would be output.

In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix use-after-free on remove Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ==================================================================

In the Linux kernel, the following vulnerability has been resolved: cgroup: Use separate src/dst nodes when preloading css_sets for migration Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Prevent buffer overflow in setup handler Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix potential double free on mesh join While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling: $ iw dev mesh0 mesh leave $ iw dev mesh0 mesh join my-mesh Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too. The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211. Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE.

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix use-after-free in hsci KASAN found that addr was dereferenced after br2dev_event_work was freed. ================================================================== BUG: KASAN: use-after-free in qeth_l2_br2dev_worker+0x5ba/0x6b0 Read of size 1 at addr 00000000fdcea440 by task kworker/u760:4/540 CPU: 17 PID: 540 Comm: kworker/u760:4 Tainted: G E 6.1.0-20221128.rc7.git1.5aa3bed4ce83.300.fc36.s390x+kasan #1 Hardware name: IBM 8561 T01 703 (LPAR) Workqueue: 0.0.8000_event qeth_l2_br2dev_worker Call Trace: [<000000016944d4ce>] dump_stack_lvl+0xc6/0xf8 [<000000016942cd9c>] print_address_description.constprop.0+0x34/0x2a0 [<000000016942d118>] print_report+0x110/0x1f8 [<0000000167a7bd04>] kasan_report+0xfc/0x128 [<000000016938d79a>] qeth_l2_br2dev_worker+0x5ba/0x6b0 [<00000001673edd1e>] process_one_work+0x76e/0x1128 [<00000001673ee85c>] worker_thread+0x184/0x1098 [<000000016740718a>] kthread+0x26a/0x310 [<00000001672c606a>] __ret_from_fork+0x8a/0xe8 [<00000001694711da>] ret_from_fork+0xa/0x40 Allocated by task 108338: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 __kasan_kmalloc+0xa0/0xc0 qeth_l2_switchdev_event+0x25a/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Freed by task 540: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 kasan_save_free_info+0x4c/0x68 ____kasan_slab_free+0x14e/0x1a8 __kasan_slab_free+0x24/0x30 __kmem_cache_free+0x168/0x338 qeth_l2_br2dev_worker+0x154/0x6b0 process_one_work+0x76e/0x1128 worker_thread+0x184/0x1098 kthread+0x26a/0x310 __ret_from_fork+0x8a/0xe8 ret_from_fork+0xa/0x40 Last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 insert_work+0x56/0x2e8 __queue_work+0x4ce/0xd10 queue_work_on+0xf4/0x100 qeth_l2_switchdev_event+0x520/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Second to last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 kvfree_call_rcu+0xb2/0x760 kernfs_unlink_open_file+0x348/0x430 kernfs_fop_release+0xc2/0x320 __fput+0x1ae/0x768 task_work_run+0x1bc/0x298 exit_to_user_mode_prepare+0x1a0/0x1a8 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 The buggy address belongs to the object at 00000000fdcea400 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 64 bytes inside of 96-byte region [00000000fdcea400, 00000000fdcea460) The buggy address belongs to the physical page: page:000000005a9c26e8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xfdcea flags: 0x3ffff00000000200(slab|node=0|zone=1|lastcpupid=0x1ffff) raw: 3ffff00000000200 0000000000000000 0000000100000122 000000008008cc00 raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 00000000fdcea300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea380: fb fb fb fb fb fb f ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix crash when startup fails. If the nic fails to start, it is possible that the reset_work has already been scheduled. Ensure the work item is canceled so we do not have use-after-free crash in case cleanup is called before the work item is executed. This fixes crash on my x86_64 apu2 when mt7921k radio fails to work. Radio still fails, but OS does not crash.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing() The SJA1105 family has 45 L2 policing table entries (SJA1105_MAX_L2_POLICING_COUNT) and SJA1110 has 110 (SJA1110_MAX_L2_POLICING_COUNT). Keeping the table structure but accounting for the difference in port count (5 in SJA1105 vs 10 in SJA1110) does not fully explain the difference. Rather, the SJA1110 also has L2 ingress policers for multicast traffic. If a packet is classified as multicast, it will be processed by the policer index 99 + SRCPORT. The sja1105_init_l2_policing() function initializes all L2 policers such that they don't interfere with normal packet reception by default. To have a common code between SJA1105 and SJA1110, the index of the multicast policer for the port is calculated because it's an index that is out of bounds for SJA1105 but in bounds for SJA1110, and a bounds check is performed. The code fails to do the proper thing when determining what to do with the multicast policer of port 0 on SJA1105 (ds->num_ports = 5). The "mcast" index will be equal to 45, which is also equal to table->ops->max_entry_count (SJA1105_MAX_L2_POLICING_COUNT). So it passes through the check. But at the same time, SJA1105 doesn't have multicast policers. So the code programs the SHARINDX field of an out-of-bounds element in the L2 Policing table of the static config. The comparison between index 45 and 45 entries should have determined the code to not access this policer index on SJA1105, since its memory wasn't even allocated. With enough bad luck, the out-of-bounds write could even overwrite other valid kernel data, but in this case, the issue was detected using KASAN. Kernel log: sja1105 spi5.0: Probed switch chip: SJA1105Q ================================================================== BUG: KASAN: slab-out-of-bounds in sja1105_setup+0x1cbc/0x2340 Write of size 8 at addr ffffff880bd57708 by task kworker/u8:0/8 ... Workqueue: events_unbound deferred_probe_work_func Call trace: ... sja1105_setup+0x1cbc/0x2340 dsa_register_switch+0x1284/0x18d0 sja1105_probe+0x748/0x840 ... Allocated by task 8: ... sja1105_setup+0x1bcc/0x2340 dsa_register_switch+0x1284/0x18d0 sja1105_probe+0x748/0x840 ...

In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix use after free in fc_exch_abts_resp() fc_exch_release(ep) will decrease the ep's reference count. When the reference count reaches zero, it is freed. But ep is still used in the following code, which will lead to a use after free. Return after the fc_exch_release() call to avoid use after free.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-sva: Fix mm use-after-free We currently call arm64_mm_context_put() without holding a reference to the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to ensure the mm only gets freed after we unpinned the ASID.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Fix driver shutdown on closed serdev The driver shutdown callback (which sends EDL_SOC_RESET to the device over serdev) should not be invoked when HCI device is not open (e.g. if hci_dev_open_sync() failed), because the serdev and its TTY are not open either. Also skip this step if device is powered off (qca_power_shutdown()). The shutdown callback causes use-after-free during system reboot with Qualcomm Atheros Bluetooth: Unable to handle kernel paging request at virtual address 0072662f67726fd7 ... CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca #8 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: tty_driver_flush_buffer+0x4/0x30 serdev_device_write_flush+0x24/0x34 qca_serdev_shutdown+0x80/0x130 [hci_uart] device_shutdown+0x15c/0x260 kernel_restart+0x48/0xac KASAN report: BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50 Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1 CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xdc/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x68/0x84 print_report+0x188/0x488 kasan_report+0xa4/0xf0 __asan_load8+0x80/0xac tty_driver_flush_buffer+0x1c/0x50 ttyport_write_flush+0x34/0x44 serdev_device_write_flush+0x48/0x60 qca_serdev_shutdown+0x124/0x274 device_shutdown+0x1e8/0x350 kernel_restart+0x48/0xb0 __do_sys_reboot+0x244/0x2d0 __arm64_sys_reboot+0x54/0x70 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x44/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xbc/0x140 el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix use-after-free and race in fastrpc_map_find Currently, there is a race window between the point when the mutex is unlocked in fastrpc_map_lookup and the reference count increasing (fastrpc_map_get) in fastrpc_map_find, which can also lead to use-after-free. So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us to both protect the maps list by also taking the &fl->lock spinlock and the reference count, since the spinlock will be released only after. Add take_ref argument to make this suitable for all callers.

In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_create_volume: Fix use-after-free when volume creation failed There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path: ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link].

In the Linux kernel, the following vulnerability has been resolved: rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink() While looking at one unrelated syzbot bug, I found the replay logic in __rtnl_newlink() to potentially trigger use-after-free. It is better to clear master_dev and m_ops inside the loop, in case we have to replay it.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential double free during failed mount RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=2088799

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_tx_handler(): fix use after free of skb can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccree - Fix use after free in cc_cipher_exit() kfree_sensitive(ctx_p->user.key) will free the ctx_p->user.key. But ctx_p->user.key is still used in the next line, which will lead to a use after free. We can call kfree_sensitive() after dev_dbg() to avoid the uaf.

In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Remove errant put in error path drm_gem_shmem_mmap() doesn't own this reference, resulting in the GEM object getting prematurely freed leading to a later use-after-free.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent hw_params and hw_free calls Currently we have neither proper check nor protection against the concurrent calls of PCM hw_params and hw_free ioctls, which may result in a UAF. Since the existing PCM stream lock can't be used for protecting the whole ioctl operations, we need a new mutex to protect those racy calls. This patch introduced a new mutex, runtime->buffer_mutex, and applies it to both hw_params and hw_free ioctl code paths. Along with it, the both functions are slightly modified (the mmap_count check is moved into the state-check block) for code simplicity.

In the Linux kernel, the following vulnerability has been resolved: tipc: re-fetch skb cb after tipc_msg_validate As the call trace shows, the original skb was freed in tipc_msg_validate(), and dereferencing the old skb cb would cause an use-after-free crash. BUG: KASAN: use-after-free in tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] Call Trace: <IRQ> tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] ... Allocated by task 47078: kmem_cache_alloc_node+0x158/0x4d0 __alloc_skb+0x1c1/0x270 tipc_buf_acquire+0x1e/0xe0 [tipc] tipc_msg_create+0x33/0x1c0 [tipc] tipc_link_build_proto_msg+0x38a/0x2100 [tipc] tipc_link_timeout+0x8b8/0xef0 [tipc] tipc_node_timeout+0x2a1/0x960 [tipc] call_timer_fn+0x2d/0x1c0 ... Freed by task 47078: tipc_msg_validate+0x7b/0x440 [tipc] tipc_crypto_rcv_complete+0x4b5/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] This patch fixes it by re-fetching the skb cb from the new allocated skb after calling tipc_msg_validate().

In the Linux kernel, the following vulnerability has been resolved: remoteproc: mtk_scp: Fix a potential double free 'scp->rproc' is allocated using devm_rproc_alloc(), so there is no need to free it explicitly in the remove function.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix use after free in _scsih_expander_node_remove() The function mpt3sas_transport_port_remove() called in _scsih_expander_node_remove() frees the port field of the sas_expander structure, leading to the following use-after-free splat from KASAN when the ioc_info() call following that function is executed (e.g. when doing rmmod of the driver module): [ 3479.371167] ================================================================== [ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531 [ 3479.393524] [ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436 [ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021 [ 3479.409263] Call Trace: [ 3479.411743] <TASK> [ 3479.413875] dump_stack_lvl+0x45/0x59 [ 3479.417582] print_address_description.constprop.0+0x1f/0x120 [ 3479.423389] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.429469] kasan_report.cold+0x83/0xdf [ 3479.433438] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.439514] _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.445411] ? _raw_spin_unlock_irqrestore+0x2d/0x40 [ 3479.452032] scsih_remove+0x525/0xc90 [mpt3sas] [ 3479.458212] ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas] [ 3479.465529] ? down_write+0xde/0x150 [ 3479.470746] ? up_write+0x14d/0x460 [ 3479.475840] ? kernfs_find_ns+0x137/0x310 [ 3479.481438] pci_device_remove+0x65/0x110 [ 3479.487013] __device_release_driver+0x316/0x680 [ 3479.493180] driver_detach+0x1ec/0x2d0 [ 3479.498499] bus_remove_driver+0xe7/0x2d0 [ 3479.504081] pci_unregister_driver+0x26/0x250 [ 3479.510033] _mpt3sas_exit+0x2b/0x6cf [mpt3sas] [ 3479.516144] __x64_sys_delete_module+0x2fd/0x510 [ 3479.522315] ? free_module+0xaa0/0xaa0 [ 3479.527593] ? __cond_resched+0x1c/0x90 [ 3479.532951] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 3479.539607] ? syscall_enter_from_user_mode+0x21/0x70 [ 3479.546161] ? trace_hardirqs_on+0x1c/0x110 [ 3479.551828] do_syscall_64+0x35/0x80 [ 3479.556884] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3479.563402] RIP: 0033:0x7f1fc482483b ... [ 3479.943087] ================================================================== Fix this by introducing the local variable port_id to store the port ID value before executing mpt3sas_transport_port_remove(). This local variable is then used in the call to ioc_info() instead of dereferencing the freed port structure.

In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf/32: Fix Oops on tail call tests test_bpf tail call tests end up as: test_bpf: #0 Tail call leaf jited:1 85 PASS test_bpf: #1 Tail call 2 jited:1 111 PASS test_bpf: #2 Tail call 3 jited:1 145 PASS test_bpf: #3 Tail call 4 jited:1 170 PASS test_bpf: #4 Tail call load/store leaf jited:1 190 PASS test_bpf: #5 Tail call load/store jited:1 BUG: Unable to handle kernel data access on write at 0xf1b4e000 Faulting instruction address: 0xbe86b710 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: test_bpf(+) CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ #195 Hardware name: PowerMac3,1 750CL 0x87210 PowerMac NIP: be86b710 LR: be857e88 CTR: be86b704 REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000 DAR: f1b4e000 DSISR: 42000000 GPR00: 00000001 f1b4dfe0 c11d2280 00000000 00000000 00000000 00000002 00000000 GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8 GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000 GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00 NIP [be86b710] 0xbe86b710 LR [be857e88] __run_one+0xec/0x264 [test_bpf] Call Trace: [f1b4dfe0] [00000002] 0x2 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- This is a tentative to write above the stack. The problem is encoutered with tests added by commit 38608ee7b690 ("bpf, tests: Add load store test case for tail call") This happens because tail call is done to a BPF prog with a different stack_depth. At the time being, the stack is kept as is when the caller tail calls its callee. But at exit, the callee restores the stack based on its own properties. Therefore here, at each run, r1 is erroneously increased by 32 - 16 = 16 bytes. This was done that way in order to pass the tail call count from caller to callee through the stack. As powerpc32 doesn't have a red zone in the stack, it was necessary the maintain the stack as is for the tail call. But it was not anticipated that the BPF frame size could be different. Let's take a new approach. Use register r4 to carry the tail call count during the tail call, and save it into the stack at function entry if required. This means the input parameter must be in r3, which is more correct as it is a 32 bits parameter, then tail call better match with normal BPF function entry, the down side being that we move that input parameter back and forth between r3 and r4. That can be optimised later. Doing that also has the advantage of maximising the common parts between tail calls and a normal function exit. With the fix, tail call tests are now successfull: test_bpf: #0 Tail call leaf jited:1 53 PASS test_bpf: #1 Tail call 2 jited:1 115 PASS test_bpf: #2 Tail call 3 jited:1 154 PASS test_bpf: #3 Tail call 4 jited:1 165 PASS test_bpf: #4 Tail call load/store leaf jited:1 101 PASS test_bpf: #5 Tail call load/store jited:1 141 PASS test_bpf: #6 Tail call error path, max count reached jited:1 994 PASS test_bpf: #7 Tail call count preserved across function calls jited:1 140975 PASS test_bpf: #8 Tail call error path, NULL target jited:1 110 PASS test_bpf: #9 Tail call error path, index out of range jited:1 69 PASS test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed]

In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: fix use after free in gswip_remove() of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be done before mdiobus_free(priv->ds->slave_mii_bus).

In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx blk_mq_run_hw_queues() could be run when there isn't queued request and after queue is cleaned up, at that time tagset is freed, because tagset lifetime is covered by driver, and often freed after blk_cleanup_queue() returns. So don't touch ->tagset for figuring out current default hctx by the mapping built in request queue, so use-after-free on tagset can be avoided. Meantime this way should be fast than retrieving mapping from tagset.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: rndis: add spinlock for rndis response list There's no lock for rndis response list. It could cause list corruption if there're two different list_add at the same time like below. It's better to add in rndis_add_response / rndis_free_response / rndis_get_next_response to prevent any race condition on response list. [ 361.894299] [1: irq/191-dwc3:16979] list_add corruption. next->prev should be prev (ffffff80651764d0), but was ffffff883dc36f80. (next=ffffff80651764d0). [ 361.904380] [1: irq/191-dwc3:16979] Call trace: [ 361.904391] [1: irq/191-dwc3:16979] __list_add_valid+0x74/0x90 [ 361.904401] [1: irq/191-dwc3:16979] rndis_msg_parser+0x168/0x8c0 [ 361.904409] [1: irq/191-dwc3:16979] rndis_command_complete+0x24/0x84 [ 361.904417] [1: irq/191-dwc3:16979] usb_gadget_giveback_request+0x20/0xe4 [ 361.904426] [1: irq/191-dwc3:16979] dwc3_gadget_giveback+0x44/0x60 [ 361.904434] [1: irq/191-dwc3:16979] dwc3_ep0_complete_data+0x1e8/0x3a0 [ 361.904442] [1: irq/191-dwc3:16979] dwc3_ep0_interrupt+0x29c/0x3dc [ 361.904450] [1: irq/191-dwc3:16979] dwc3_process_event_entry+0x78/0x6cc [ 361.904457] [1: irq/191-dwc3:16979] dwc3_process_event_buf+0xa0/0x1ec [ 361.904465] [1: irq/191-dwc3:16979] dwc3_thread_interrupt+0x34/0x5c

In the Linux kernel, the following vulnerability has been resolved: bfq: Make sure bfqg for which we are queueing requests is online Bios queued into BFQ IO scheduler can be associated with a cgroup that was already offlined. This may then cause insertion of this bfq_group into a service tree. But this bfq_group will get freed as soon as last bio associated with it is completed leading to use after free issues for service tree users. Fix the problem by making sure we always operate on online bfq_group. If the bfq_group associated with the bio is not online, we pick the first online parent.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix buffer copy overflow of ztailpacking feature I got some KASAN report as below: [ 46.959738] ================================================================== [ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188 ... [ 46.960430] Call Trace: [ 46.960430] <TASK> [ 46.960430] dump_stack_lvl+0x41/0x5e [ 46.960430] print_report.cold+0xb2/0x6b7 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_report+0x8a/0x140 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_check_range+0x14d/0x1d0 [ 46.960430] memcpy+0x20/0x60 [ 46.960430] z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080 The root cause is that the tail pcluster won't be a complete filesystem block anymore. So if ztailpacking is used, the second part of an uncompressed tail pcluster may not be ``rq->pageofs_out``.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: avoid skb access on nf_stolen When verdict is NF_STOLEN, the skb might have been freed. When tracing is enabled, this can result in a use-after-free: 1. access to skb->nf_trace 2. access to skb->mark 3. computation of trace id 4. dump of packet payload To avoid 1, keep a cached copy of skb->nf_trace in the trace state struct. Refresh this copy whenever verdict is != STOLEN. Avoid 2 by skipping skb->mark access if verdict is STOLEN. 3 is avoided by precomputing the trace id. Only dump the packet when verdict is not "STOLEN".

In the Linux kernel, the following vulnerability has been resolved: HID: elan: Fix potential double free in elan_input_configured 'input' is a managed resource allocated with devm_input_allocate_device(), so there is no need to call input_free_device() explicitly or there will be a double free. According to the doc of devm_input_allocate_device(): * Managed input devices do not need to be explicitly unregistered or * freed as it will be done automatically when owner device unbinds from * its driver (or binding fails).