In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: don't unpoison huge_zero_folio When I did memory failure tests recently, below panic occurs: kernel BUG at include/linux/mm.h:1135! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14 RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0 RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246 RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0 RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492 R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00 FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0 Call Trace: <TASK> do_shrink_slab+0x14f/0x6a0 shrink_slab+0xca/0x8c0 shrink_node+0x2d0/0x7d0 balance_pgdat+0x33a/0x720 kswapd+0x1f3/0x410 kthread+0xd5/0x100 ret_from_fork+0x2f/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: mce_inject hwpoison_inject ---[ end trace 0000000000000000 ]--- RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0 RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246 RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0 RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492 R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00 FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0 The root cause is that HWPoison flag will be set for huge_zero_folio without increasing the folio refcnt. But then unpoison_memory() will decrease the folio refcnt unexpectedly as it appears like a successfully hwpoisoned folio leading to VM_BUG_ON_PAGE(page_ref_count(page) == 0) when releasing huge_zero_folio. Skip unpoisoning huge_zero_folio in unpoison_memory() to fix this issue. We're not prepared to unpoison huge_zero_folio yet.

In the Linux kernel, the following vulnerability has been resolved: mm/filemap: skip to create PMD-sized page cache if needed On ARM64, HPAGE_PMD_ORDER is 13 when the base page size is 64KB. The PMD-sized page cache can't be supported by xarray as the following error messages indicate. ------------[ cut here ]------------ WARNING: CPU: 35 PID: 7484 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm \ fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ sha1_ce virtio_net net_failover virtio_console virtio_blk failover \ dimlib virtio_mmio CPU: 35 PID: 7484 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff800087a4f6c0 x29: ffff800087a4f6c0 x28: ffff800087a4f720 x27: 000000001fffffff x26: 0000000000000c40 x25: 000000000000000d x24: ffff00010625b858 x23: ffff800087a4f720 x22: ffffffdfc0780000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0780000 x18: 000000001ff40000 x17: 00000000ffffffff x16: 0000018000000000 x15: 51ec004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 51ec000000000000 x10: 51ece1c0ffff8000 x9 : ffffbeb961a44d28 x8 : 0000000000000003 x7 : ffffffdfc0456420 x6 : ffff0000e1aa6eb8 x5 : 20bf08b4fe778fca x4 : ffffffdfc0456420 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa0 xfs_flush_unmap_range+0x70/0x90 [xfs] xfs_file_fallocate+0xfc/0x4d8 [xfs] vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by skipping to allocate PMD-sized page cache when its size is larger than MAX_PAGECACHE_ORDER. For this specific case, we will fall to regular path where the readahead window is determined by BDI's sysfs file (read_ahead_kb).

In the Linux kernel, the following vulnerability has been resolved: ionic: fix kernel panic in XDP_TX action In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8 R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100 FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x254/0x790 ? __pfx_page_fault_oops+0x10/0x10 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? search_bpf_extables+0x165/0x260 ? fixup_exception+0x4a/0x970 ? exc_page_fault+0xcb/0xe0 ? asm_exc_page_fault+0x22/0x30 ? 0xffffffffc0051f64 ? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f ? do_raw_spin_unlock+0x54/0x220 ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x7e7/0xc30 ? __pfx_net_rx_action+0x10/0x10

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bypass empty buckets in batadv_purge_orig_ref() Many syzbot reports are pointing to soft lockups in batadv_purge_orig_ref() [1] Root cause is unknown, but we can avoid spending too much time there and perhaps get more interesting reports. [1] watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:6:621] Modules linked in: irq event stamp: 6182794 hardirqs last enabled at (6182793): [<ffff8000801dae10>] __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386 hardirqs last disabled at (6182794): [<ffff80008ad66a78>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (6182794): [<ffff80008ad66a78>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (6182792): [<ffff80008aab71c4>] spin_unlock_bh include/linux/spinlock.h:396 [inline] softirqs last enabled at (6182792): [<ffff80008aab71c4>] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287 softirqs last disabled at (6182790): [<ffff80008aab61dc>] spin_lock_bh include/linux/spinlock.h:356 [inline] softirqs last disabled at (6182790): [<ffff80008aab61dc>] batadv_purge_orig_ref+0x164/0x1228 net/batman-adv/originator.c:1271 CPU: 0 PID: 621 Comm: kworker/u4:6 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Workqueue: bat_events batadv_purge_orig pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : should_resched arch/arm64/include/asm/preempt.h:79 [inline] pc : __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:388 lr : __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386 sp : ffff800099007970 x29: ffff800099007980 x28: 1fffe00018fce1bd x27: dfff800000000000 x26: ffff0000d2620008 x25: ffff0000c7e70de8 x24: 0000000000000001 x23: 1fffe00018e57781 x22: dfff800000000000 x21: ffff80008aab71c4 x20: ffff0001b40136c0 x19: ffff0000c72bbc08 x18: 1fffe0001a817bb0 x17: ffff800125414000 x16: ffff80008032116c x15: 0000000000000001 x14: 1fffe0001ee9d610 x13: 0000000000000000 x12: 0000000000000003 x11: 0000000000000000 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 00000000005e5789 x7 : ffff80008aab61dc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000006 x1 : 0000000000000080 x0 : ffff800125414000 Call trace: __daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline] arch_local_irq_enable arch/arm64/include/asm/irqflags.h:49 [inline] __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:386 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x3c/0x4c kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287 batadv_purge_orig+0x20/0x70 net/batman-adv/originator.c:1300 process_one_work+0x694/0x1204 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:2787 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:51 lr : default_idle_call+0xf8/0x128 kernel/sched/idle.c:103 sp : ffff800093a17d30 x29: ffff800093a17d30 x28: dfff800000000000 x27: 1ffff00012742fb4 x26: ffff80008ec9d000 x25: 0000000000000000 x24: 0000000000000002 x23: 1ffff00011d93a74 x22: ffff80008ec9d3a0 x21: 0000000000000000 x20: ffff0000c19dbc00 x19: ffff8000802d0fd8 x18: 1fffe00036804396 x17: ffff80008ec9d000 x16: ffff8000802d089c x15: 0000000000000001 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/lima: mask irqs in timeout path before hard reset There is a race condition in which a rendering job might take just long enough to trigger the drm sched job timeout handler but also still complete before the hard reset is done by the timeout handler. This runs into race conditions not expected by the timeout handler. In some very specific cases it currently may result in a refcount imbalance on lima_pm_idle, with a stack dump such as: [10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669628] Call trace: [10136.669634] lima_devfreq_record_idle+0xa0/0xb0 [10136.669646] lima_sched_pipe_task_done+0x5c/0xb0 [10136.669656] lima_gp_irq_handler+0xa8/0x120 [10136.669666] __handle_irq_event_percpu+0x48/0x160 [10136.669679] handle_irq_event+0x4c/0xc0 We can prevent that race condition entirely by masking the irqs at the beginning of the timeout handler, at which point we give up on waiting for that job entirely. The irqs will be enabled again at the next hard reset which is already done as a recovery by the timeout handler.

In the Linux kernel, the following vulnerability has been resolved: tracing: Build event generation tests only as modules The kprobes and synth event generation test modules add events and lock (get a reference) those event file reference in module init function, and unlock and delete it in module exit function. This is because those are designed for playing as modules. If we make those modules as built-in, those events are left locked in the kernel, and never be removed. This causes kprobe event self-test failure as below. [ 97.349708] ------------[ cut here ]------------ [ 97.353453] WARNING: CPU: 3 PID: 1 at kernel/trace/trace_kprobe.c:2133 kprobe_trace_self_tests_init+0x3f1/0x480 [ 97.357106] Modules linked in: [ 97.358488] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.9.0-g699646734ab5-dirty #14 [ 97.361556] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 97.363880] RIP: 0010:kprobe_trace_self_tests_init+0x3f1/0x480 [ 97.365538] Code: a8 24 08 82 e9 ae fd ff ff 90 0f 0b 90 48 c7 c7 e5 aa 0b 82 e9 ee fc ff ff 90 0f 0b 90 48 c7 c7 2d 61 06 82 e9 8e fd ff ff 90 <0f> 0b 90 48 c7 c7 33 0b 0c 82 89 c6 e8 6e 03 1f ff 41 ff c7 e9 90 [ 97.370429] RSP: 0000:ffffc90000013b50 EFLAGS: 00010286 [ 97.371852] RAX: 00000000fffffff0 RBX: ffff888005919c00 RCX: 0000000000000000 [ 97.373829] RDX: ffff888003f40000 RSI: ffffffff8236a598 RDI: ffff888003f40a68 [ 97.375715] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 97.377675] R10: ffffffff811c9ae5 R11: ffffffff8120c4e0 R12: 0000000000000000 [ 97.379591] R13: 0000000000000001 R14: 0000000000000015 R15: 0000000000000000 [ 97.381536] FS: 0000000000000000(0000) GS:ffff88807dcc0000(0000) knlGS:0000000000000000 [ 97.383813] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 97.385449] CR2: 0000000000000000 CR3: 0000000002244000 CR4: 00000000000006b0 [ 97.387347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 97.389277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 97.391196] Call Trace: [ 97.391967] <TASK> [ 97.392647] ? __warn+0xcc/0x180 [ 97.393640] ? kprobe_trace_self_tests_init+0x3f1/0x480 [ 97.395181] ? report_bug+0xbd/0x150 [ 97.396234] ? handle_bug+0x3e/0x60 [ 97.397311] ? exc_invalid_op+0x1a/0x50 [ 97.398434] ? asm_exc_invalid_op+0x1a/0x20 [ 97.399652] ? trace_kprobe_is_busy+0x20/0x20 [ 97.400904] ? tracing_reset_all_online_cpus+0x15/0x90 [ 97.402304] ? kprobe_trace_self_tests_init+0x3f1/0x480 [ 97.403773] ? init_kprobe_trace+0x50/0x50 [ 97.404972] do_one_initcall+0x112/0x240 [ 97.406113] do_initcall_level+0x95/0xb0 [ 97.407286] ? kernel_init+0x1a/0x1a0 [ 97.408401] do_initcalls+0x3f/0x70 [ 97.409452] kernel_init_freeable+0x16f/0x1e0 [ 97.410662] ? rest_init+0x1f0/0x1f0 [ 97.411738] kernel_init+0x1a/0x1a0 [ 97.412788] ret_from_fork+0x39/0x50 [ 97.413817] ? rest_init+0x1f0/0x1f0 [ 97.414844] ret_from_fork_asm+0x11/0x20 [ 97.416285] </TASK> [ 97.417134] irq event stamp: 13437323 [ 97.418376] hardirqs last enabled at (13437337): [<ffffffff8110bc0c>] console_unlock+0x11c/0x150 [ 97.421285] hardirqs last disabled at (13437370): [<ffffffff8110bbf1>] console_unlock+0x101/0x150 [ 97.423838] softirqs last enabled at (13437366): [<ffffffff8108e17f>] handle_softirqs+0x23f/0x2a0 [ 97.426450] softirqs last disabled at (13437393): [<ffffffff8108e346>] __irq_exit_rcu+0x66/0xd0 [ 97.428850] ---[ end trace 0000000000000000 ]--- And also, since we can not cleanup dynamic_event file, ftracetest are failed too. To avoid these issues, build these tests only as modules.

In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: fix endpoint checking in cxacru_bind() Syzbot is still reporting quite an old issue [1] that occurs due to incomplete checking of present usb endpoints. As such, wrong endpoints types may be used at urb sumbitting stage which in turn triggers a warning in usb_submit_urb(). Fix the issue by verifying that required endpoint types are present for both in and out endpoints, taking into account cmd endpoint type. Unfortunately, this patch has not been tested on real hardware. [1] Syzbot report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 8667 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 0 PID: 8667 Comm: kworker/0:4 Not tainted 5.14.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 ... Call Trace: cxacru_cm+0x3c0/0x8e0 drivers/usb/atm/cxacru.c:649 cxacru_card_status+0x22/0xd0 drivers/usb/atm/cxacru.c:760 cxacru_bind+0x7ac/0x11a0 drivers/usb/atm/cxacru.c:1209 usbatm_usb_probe+0x321/0x1ae0 drivers/usb/atm/usbatm.c:1055 cxacru_usb_probe+0xdf/0x1e0 drivers/usb/atm/cxacru.c:1363 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:517 [inline] really_probe+0x23c/0xcd0 drivers/base/dd.c:595 __driver_probe_device+0x338/0x4d0 drivers/base/dd.c:747 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:777 __device_attach_driver+0x20b/0x2f0 drivers/base/dd.c:894 bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:427 __device_attach+0x228/0x4a0 drivers/base/dd.c:965 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:487 device_add+0xc2f/0x2180 drivers/base/core.c:3354 usb_set_configuration+0x113a/0x1910 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0xba/0x100 drivers/usb/core/generic.c:238 usb_probe_device+0xd9/0x2c0 drivers/usb/core/driver.c:293

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix kernel crash during resume Currently during resume, QMI target memory is not properly handled, resulting in kernel crash in case DMA remap is not supported: BUG: Bad page state in process kworker/u16:54 pfn:36e80 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80 page dumped because: nonzero _refcount Call Trace: bad_page free_page_is_bad_report __free_pages_ok __free_pages dma_direct_free dma_free_attrs ath12k_qmi_free_target_mem_chunk ath12k_qmi_msg_mem_request_cb The reason is: Once ath12k module is loaded, firmware sends memory request to host. In case DMA remap not supported, ath12k refuses the first request due to failure in allocating with large segment size: ath12k_pci 0000:04:00.0: qmi firmware request memory request ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144 ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size ath12k_pci 0000:04:00.0: qmi delays mem_request 2 ath12k_pci 0000:04:00.0: qmi firmware request memory request Later firmware comes back with more but small segments and allocation succeeds: ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 Now ath12k is working. If suspend is triggered, firmware will be reloaded during resume. As same as before, firmware requests two large segments at first. In ath12k_qmi_msg_mem_request_cb() segment count and size are assigned: ab->qmi.mem_seg_count == 2 ab->qmi.target_mem[0].size == 7077888 ab->qmi.target_mem[1].size == 8454144 Then allocation failed like before and ath12k_qmi_free_target_mem_chunk() is called to free all allocated segments. Note the first segment is skipped because its v.addr is cleared due to allocation failure: chunk->v.addr = dma_alloc_coherent() Also note that this leaks that segment because it has not been freed. While freeing the second segment, a size of 8454144 is passed to dma_free_coherent(). However remember that this segment is allocated at the first time firmware is loaded, before suspend. So its real size is 524288, much smaller than 8454144. As a result kernel found we are freeing some memory which is in use and thus cras ---truncated---

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: disable rx data ring on dma allocation failure When vmxnet3_rq_create() fails to allocate memory for rq->data_ring.base, the subsequent call to vmxnet3_rq_destroy_all_rxdataring does not reset rq->data_ring.desc_size for the data ring that failed, which presumably causes the hypervisor to reference it on packet reception. To fix this bug, rq->data_ring.desc_size needs to be set to 0 to tell the hypervisor to disable this feature. [ 95.436876] kernel BUG at net/core/skbuff.c:207! [ 95.439074] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 95.440411] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.9.3-dirty #1 [ 95.441558] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 12/12/2018 [ 95.443481] RIP: 0010:skb_panic+0x4d/0x4f [ 95.444404] Code: 4f 70 50 8b 87 c0 00 00 00 50 8b 87 bc 00 00 00 50 ff b7 d0 00 00 00 4c 8b 8f c8 00 00 00 48 c7 c7 68 e8 be 9f e8 63 58 f9 ff <0f> 0b 48 8b 14 24 48 c7 c1 d0 73 65 9f e8 a1 ff ff ff 48 8b 14 24 [ 95.447684] RSP: 0018:ffffa13340274dd0 EFLAGS: 00010246 [ 95.448762] RAX: 0000000000000089 RBX: ffff8fbbc72b02d0 RCX: 000000000000083f [ 95.450148] RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f [ 95.451520] RBP: 000000000000002d R08: 0000000000000000 R09: ffffa13340274c60 [ 95.452886] R10: ffffffffa04ed468 R11: 0000000000000002 R12: 0000000000000000 [ 95.454293] R13: ffff8fbbdab3c2d0 R14: ffff8fbbdbd829e0 R15: ffff8fbbdbd809e0 [ 95.455682] FS: 0000000000000000(0000) GS:ffff8fbeefd80000(0000) knlGS:0000000000000000 [ 95.457178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.458340] CR2: 00007fd0d1f650c8 CR3: 0000000115f28000 CR4: 00000000000406f0 [ 95.459791] Call Trace: [ 95.460515] <IRQ> [ 95.461180] ? __die_body.cold+0x19/0x27 [ 95.462150] ? die+0x2e/0x50 [ 95.462976] ? do_trap+0xca/0x110 [ 95.463973] ? do_error_trap+0x6a/0x90 [ 95.464966] ? skb_panic+0x4d/0x4f [ 95.465901] ? exc_invalid_op+0x50/0x70 [ 95.466849] ? skb_panic+0x4d/0x4f [ 95.467718] ? asm_exc_invalid_op+0x1a/0x20 [ 95.468758] ? skb_panic+0x4d/0x4f [ 95.469655] skb_put.cold+0x10/0x10 [ 95.470573] vmxnet3_rq_rx_complete+0x862/0x11e0 [vmxnet3] [ 95.471853] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3] [ 95.473185] __napi_poll+0x2b/0x160 [ 95.474145] net_rx_action+0x2c6/0x3b0 [ 95.475115] handle_softirqs+0xe7/0x2a0 [ 95.476122] __irq_exit_rcu+0x97/0xb0 [ 95.477109] common_interrupt+0x85/0xa0 [ 95.478102] </IRQ> [ 95.478846] <TASK> [ 95.479603] asm_common_interrupt+0x26/0x40 [ 95.480657] RIP: 0010:pv_native_safe_halt+0xf/0x20 [ 95.481801] Code: 22 d7 e9 54 87 01 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d 93 ba 3b 00 fb f4 <e9> 2c 87 01 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 [ 95.485563] RSP: 0018:ffffa133400ffe58 EFLAGS: 00000246 [ 95.486882] RAX: 0000000000004000 RBX: ffff8fbbc1d14064 RCX: 0000000000000000 [ 95.488477] RDX: ffff8fbeefd80000 RSI: ffff8fbbc1d14000 RDI: 0000000000000001 [ 95.490067] RBP: ffff8fbbc1d14064 R08: ffffffffa0652260 R09: 00000000000010d3 [ 95.491683] R10: 0000000000000018 R11: ffff8fbeefdb4764 R12: ffffffffa0652260 [ 95.493389] R13: ffffffffa06522e0 R14: 0000000000000001 R15: 0000000000000000 [ 95.495035] acpi_safe_halt+0x14/0x20 [ 95.496127] acpi_idle_do_entry+0x2f/0x50 [ 95.497221] acpi_idle_enter+0x7f/0xd0 [ 95.498272] cpuidle_enter_state+0x81/0x420 [ 95.499375] cpuidle_enter+0x2d/0x40 [ 95.500400] do_idle+0x1e5/0x240 [ 95.501385] cpu_startup_entry+0x29/0x30 [ 95.502422] start_secondary+0x11c/0x140 [ 95.503454] common_startup_64+0x13e/0x141 [ 95.504466] </TASK> [ 95.505197] Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ip ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix NULL pointer dereference in ocfs2_journal_dirty() bdev->bd_super has been removed and commit 8887b94d9322 change the usage from bdev->bd_super to b_assoc_map->host->i_sb. This introduces the following NULL pointer dereference in ocfs2_journal_dirty() since b_assoc_map is still not initialized. This can be easily reproduced by running xfstests generic/186, which simulate no more credits. [ 134.351592] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 134.355341] RIP: 0010:ocfs2_journal_dirty+0x14f/0x160 [ocfs2] ... [ 134.365071] Call Trace: [ 134.365312] <TASK> [ 134.365524] ? __die_body+0x1e/0x60 [ 134.365868] ? page_fault_oops+0x13d/0x4f0 [ 134.366265] ? __pfx_bit_wait_io+0x10/0x10 [ 134.366659] ? schedule+0x27/0xb0 [ 134.366981] ? exc_page_fault+0x6a/0x140 [ 134.367356] ? asm_exc_page_fault+0x26/0x30 [ 134.367762] ? ocfs2_journal_dirty+0x14f/0x160 [ocfs2] [ 134.368305] ? ocfs2_journal_dirty+0x13d/0x160 [ocfs2] [ 134.368837] ocfs2_create_new_meta_bhs.isra.51+0x139/0x2e0 [ocfs2] [ 134.369454] ocfs2_grow_tree+0x688/0x8a0 [ocfs2] [ 134.369927] ocfs2_split_and_insert.isra.67+0x35c/0x4a0 [ocfs2] [ 134.370521] ocfs2_split_extent+0x314/0x4d0 [ocfs2] [ 134.371019] ocfs2_change_extent_flag+0x174/0x410 [ocfs2] [ 134.371566] ocfs2_add_refcount_flag+0x3fa/0x630 [ocfs2] [ 134.372117] ocfs2_reflink_remap_extent+0x21b/0x4c0 [ocfs2] [ 134.372994] ? inode_update_timestamps+0x4a/0x120 [ 134.373692] ? __pfx_ocfs2_journal_access_di+0x10/0x10 [ocfs2] [ 134.374545] ? __pfx_ocfs2_journal_access_di+0x10/0x10 [ocfs2] [ 134.375393] ocfs2_reflink_remap_blocks+0xe4/0x4e0 [ocfs2] [ 134.376197] ocfs2_remap_file_range+0x1de/0x390 [ocfs2] [ 134.376971] ? security_file_permission+0x29/0x50 [ 134.377644] vfs_clone_file_range+0xfe/0x320 [ 134.378268] ioctl_file_clone+0x45/0xa0 [ 134.378853] do_vfs_ioctl+0x457/0x990 [ 134.379422] __x64_sys_ioctl+0x6e/0xd0 [ 134.379987] do_syscall_64+0x5d/0x170 [ 134.380550] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 134.381231] RIP: 0033:0x7fa4926397cb [ 134.381786] Code: 73 01 c3 48 8b 0d bd 56 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8d 56 38 00 f7 d8 64 89 01 48 [ 134.383930] RSP: 002b:00007ffc2b39f7b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 134.384854] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fa4926397cb [ 134.385734] RDX: 00007ffc2b39f7f0 RSI: 000000004020940d RDI: 0000000000000003 [ 134.386606] RBP: 0000000000000000 R08: 00111a82a4f015bb R09: 00007fa494221000 [ 134.387476] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 134.388342] R13: 0000000000f10000 R14: 0000558e844e2ac8 R15: 0000000000f10000 [ 134.389207] </TASK> Fix it by only aborting transaction and journal in ocfs2_journal_dirty() now, and leave ocfs2_abort() later when detecting an aborted handle, e.g. start next transaction. Also log the handle details in this case.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix responder length checking for UD request packets According to the IBA specification: If a UD request packet is detected with an invalid length, the request shall be an invalid request and it shall be silently dropped by the responder. The responder then waits for a new request packet. commit 689c5421bfe0 ("RDMA/rxe: Fix incorrect responder length checking") defers responder length check for UD QPs in function `copy_data`. But it introduces a regression issue for UD QPs. When the packet size is too large to fit in the receive buffer. `copy_data` will return error code -EINVAL. Then `send_data_in` will return RESPST_ERR_MALFORMED_WQE. UD QP will transfer into ERROR state.

In the Linux kernel, the following vulnerability has been resolved: mm: vmalloc: check if a hash-index is in cpu_possible_mask The problem is that there are systems where cpu_possible_mask has gaps between set CPUs, for example SPARC. In this scenario addr_to_vb_xa() hash function can return an index which accesses to not-possible and not setup CPU area using per_cpu() macro. This results in an oops on SPARC. A per-cpu vmap_block_queue is also used as hash table, incorrectly assuming the cpu_possible_mask has no gaps. Fix it by adjusting an index to a next possible CPU.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: change vm->task_info handling This patch changes the handling and lifecycle of vm->task_info object. The major changes are: - vm->task_info is a dynamically allocated ptr now, and its uasge is reference counted. - introducing two new helper funcs for task_info lifecycle management - amdgpu_vm_get_task_info: reference counts up task_info before returning this info - amdgpu_vm_put_task_info: reference counts down task_info - last put to task_info() frees task_info from the vm. This patch also does logistical changes required for existing usage of vm->task_info. V2: Do not block all the prints when task_info not found (Felix) V3: Fixed review comments from Felix - Fix wrong indentation - No debug message for -ENOMEM - Add NULL check for task_info - Do not duplicate the debug messages (ti vs no ti) - Get first reference of task_info in vm_init(), put last in vm_fini() V4: Fixed review comments from Felix - fix double reference increment in create_task_info - change amdgpu_vm_get_task_info_pasid - additional changes in amdgpu_gem.c while porting

In the Linux kernel, the following vulnerability has been resolved: seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors input_action_end_dx4() and input_action_end_dx6() are called NF_HOOK() for PREROUTING hook, in PREROUTING hook, we should passing a valid indev, and a NULL outdev to NF_HOOK(), otherwise may trigger a NULL pointer dereference, as below: [74830.647293] BUG: kernel NULL pointer dereference, address: 0000000000000090 [74830.655633] #PF: supervisor read access in kernel mode [74830.657888] #PF: error_code(0x0000) - not-present page [74830.659500] PGD 0 P4D 0 [74830.660450] Oops: 0000 [#1] PREEMPT SMP PTI ... [74830.664953] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [74830.666569] RIP: 0010:rpfilter_mt+0x44/0x15e [ipt_rpfilter] ... [74830.689725] Call Trace: [74830.690402] <IRQ> [74830.690953] ? show_trace_log_lvl+0x1c4/0x2df [74830.692020] ? show_trace_log_lvl+0x1c4/0x2df [74830.693095] ? ipt_do_table+0x286/0x710 [ip_tables] [74830.694275] ? __die_body.cold+0x8/0xd [74830.695205] ? page_fault_oops+0xac/0x140 [74830.696244] ? exc_page_fault+0x62/0x150 [74830.697225] ? asm_exc_page_fault+0x22/0x30 [74830.698344] ? rpfilter_mt+0x44/0x15e [ipt_rpfilter] [74830.699540] ipt_do_table+0x286/0x710 [ip_tables] [74830.700758] ? ip6_route_input+0x19d/0x240 [74830.701752] nf_hook_slow+0x3f/0xb0 [74830.702678] input_action_end_dx4+0x19b/0x1e0 [74830.703735] ? input_action_end_t+0xe0/0xe0 [74830.704734] seg6_local_input_core+0x2d/0x60 [74830.705782] lwtunnel_input+0x5b/0xb0 [74830.706690] __netif_receive_skb_one_core+0x63/0xa0 [74830.707825] process_backlog+0x99/0x140 [74830.709538] __napi_poll+0x2c/0x160 [74830.710673] net_rx_action+0x296/0x350 [74830.711860] __do_softirq+0xcb/0x2ac [74830.713049] do_softirq+0x63/0x90 input_action_end_dx4() passing a NULL indev to NF_HOOK(), and finally trigger a NULL dereference in rpfilter_mt()->rpfilter_is_loopback(): static bool rpfilter_is_loopback(const struct sk_buff *skb, const struct net_device *in) { // in is NULL return skb->pkt_type == PACKET_LOOPBACK || in->flags & IFF_LOOPBACK; }

In the Linux kernel, the following vulnerability has been resolved: serial: imx: Introduce timeout when waiting on transmitter empty By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential deadlock. In case of the timeout, there is not much we can do, so we simply ignore the transmitter state and optimistically try to continue.

In the Linux kernel, the following vulnerability has been resolved: ila: block BH in ila_output() As explained in commit 1378817486d6 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. ila_output() is called from lwtunnel_output() possibly from process context, and under rcu_read_lock(). We might be interrupted by a softirq, re-enter ila_output() and corrupt dst_cache data structures. Fix the race by using local_bh_disable().

In the Linux kernel, the following vulnerability has been resolved: ima: Avoid blocking in RCU read-side critical section A panic happens in ima_match_policy: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 42f873067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 5 PID: 1286325 Comm: kubeletmonit.sh Kdump: loaded Tainted: P Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ima_match_policy+0x84/0x450 Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39 7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea 44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f RSP: 0018:ff71570009e07a80 EFLAGS: 00010207 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200 RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739 R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970 R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001 FS: 00007f5195b51740(0000) GS:ff3e278b12d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ima_get_action+0x22/0x30 process_measurement+0xb0/0x830 ? page_add_file_rmap+0x15/0x170 ? alloc_set_pte+0x269/0x4c0 ? prep_new_page+0x81/0x140 ? simple_xattr_get+0x75/0xa0 ? selinux_file_open+0x9d/0xf0 ima_file_check+0x64/0x90 path_openat+0x571/0x1720 do_filp_open+0x9b/0x110 ? page_counter_try_charge+0x57/0xc0 ? files_cgroup_alloc_fd+0x38/0x60 ? __alloc_fd+0xd4/0x250 ? do_sys_open+0x1bd/0x250 do_sys_open+0x1bd/0x250 do_syscall_64+0x5d/0x1d0 entry_SYSCALL_64_after_hwframe+0x65/0xca Commit c7423dbdbc9e ("ima: Handle -ESTALE returned by ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a RCU read-side critical section which contains kmalloc with GFP_KERNEL. This implies a possible sleep and violates limitations of RCU read-side critical sections on non-PREEMPT systems. Sleeping within RCU read-side critical section might cause synchronize_rcu() returning early and break RCU protection, allowing a UAF to happen. The root cause of this issue could be described as follows: | Thread A | Thread B | | |ima_match_policy | | | rcu_read_lock | |ima_lsm_update_rule | | | synchronize_rcu | | | | kmalloc(GFP_KERNEL)| | | sleep | ==> synchronize_rcu returns early | kfree(entry) | | | | entry = entry->next| ==> UAF happens and entry now becomes NULL (or could be anything). | | entry->action | ==> Accessing entry might cause panic. To fix this issue, we are converting all kmalloc that is called within RCU read-side critical section to use GFP_ATOMIC. [PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case]

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible NULL deref in fib6_nh_init() syzbot reminds us that in6_dev_get() can return NULL. fib6_nh_init() ip6_validate_gw( &idev ) ip6_route_check_nh( idev ) *idev = in6_dev_get(dev); // can be NULL Oops: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 11237 Comm: syz-executor.3 Not tainted 6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 RIP: 0010:fib6_nh_init+0x640/0x2160 net/ipv6/route.c:3606 Code: 00 00 fc ff df 4c 8b 64 24 58 48 8b 44 24 28 4c 8b 74 24 30 48 89 c1 48 89 44 24 28 48 8d 98 e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 0f 85 b3 17 00 00 8b 1b 31 ff 89 de e8 b8 8b RSP: 0018:ffffc900032775a0 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffffc90003277a54 RDI: ffff88802b3a08d8 RBP: ffffc900032778b0 R08: 00000000000002fc R09: 0000000000000000 R10: 00000000000002fc R11: 0000000000000000 R12: ffff88802b3a08b8 R13: 1ffff9200064eec8 R14: ffffc90003277a00 R15: dffffc0000000000 FS: 00007f940feb06c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000245e8000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip6_route_info_create+0x99e/0x12b0 net/ipv6/route.c:3809 ip6_route_add+0x28/0x160 net/ipv6/route.c:3853 ipv6_route_ioctl+0x588/0x870 net/ipv6/route.c:4483 inet6_ioctl+0x21a/0x280 net/ipv6/af_inet6.c:579 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f940f07cea9

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix UBSAN warning in kv_dpm.c Adds bounds check for sumo_vid_mapping_entry.

In the Linux kernel, the following vulnerability has been resolved: mm: avoid leaving partial pfn mappings around in error case As Jann points out, PFN mappings are special, because unlike normal memory mappings, there is no lifetime information associated with the mapping - it is just a raw mapping of PFNs with no reference counting of a 'struct page'. That's all very much intentional, but it does mean that it's easy to mess up the cleanup in case of errors. Yes, a failed mmap() will always eventually clean up any partial mappings, but without any explicit lifetime in the page table mapping itself, it's very easy to do the error handling in the wrong order. In particular, it's easy to mistakenly free the physical backing store before the page tables are actually cleaned up and (temporarily) have stale dangling PTE entries. To make this situation less error-prone, just make sure that any partial pfn mapping is torn down early, before any other error handling.

In the Linux kernel, the following vulnerability has been resolved: cachestat: do not flush stats in recency check syzbot detects that cachestat() is flushing stats, which can sleep, in its RCU read section (see [1]). This is done in the workingset_test_recent() step (which checks if the folio's eviction is recent). Move the stat flushing step to before the RCU read section of cachestat, and skip stat flushing during the recency check. [1]: https://lore.kernel.org/cgroups/000000000000f71227061bdf97e0@google.com/

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire() If the __qcuefi pointer is not set, then in the original code, we would hold onto the lock. That means that if we tried to set it later, then it would cause a deadlock. Drop the lock on the error path. That's what all the callers are expecting.

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Whitelist dtl slub object for copying to userspace Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below. kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 #85 Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8 REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e CFAR: c0000000001fdc80 IRQMASK: 0 [ ... GPRs omitted ... ] NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0 LR [c0000000005d23d0] usercopy_abort+0x74/0xb0 Call Trace: usercopy_abort+0x74/0xb0 (unreliable) __check_heap_object+0xf8/0x120 check_heap_object+0x218/0x240 __check_object_size+0x84/0x1a4 dtl_file_read+0x17c/0x2c4 full_proxy_read+0x8c/0x110 vfs_read+0xdc/0x3a0 ksys_read+0x84/0x144 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec --- interrupt: 3000 at 0x7fff81f3ab34 Commit 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0") requires that only whitelisted areas in slab/slub objects can be copied to userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY. Dtl contains hypervisor dispatch events which are expected to be read by privileged users. Hence mark this safe for user access. Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the entire object.

In the Linux kernel, the following vulnerability has been resolved: bpf: Set run context for rawtp test_run callback syzbot reported crash when rawtp program executed through the test_run interface calls bpf_get_attach_cookie helper or any other helper that touches task->bpf_ctx pointer. Setting the run context (task->bpf_ctx pointer) for test_run callback.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921s: fix potential hung tasks during chip recovery During chip recovery (e.g. chip reset), there is a possible situation that kernel worker reset_work is holding the lock and waiting for kernel thread stat_worker to be parked, while stat_worker is waiting for the release of the same lock. It causes a deadlock resulting in the dumping of hung tasks messages and possible rebooting of the device. This patch prevents the execution of stat_worker during the chip recovery.

In the Linux kernel, the following vulnerability has been resolved: Avoid hw_desc array overrun in dw-axi-dmac I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3 segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put() handles the hw_desc considering the descs_allocated, this scenario would result in a kernel panic (hw_desc array will be overrun). To fix this, the proposal is to add a new member to the axi_dma_desc structure, where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in axi_desc_put() to handle the hw_desc array correctly. Additionally I propose to remove the axi_chan_start_first_queued() call after completing the transfer, since it was identified that unbalance can occur (started descriptors can be interrupted and transfer ignored due to DMA channel not being enabled).

A use-after-free flaw was found in the add_partition in block/partitions/core.c in the Linux kernel. A local attacker with user privileges could cause a denial of service on the system. The issue results from the lack of code cleanup when device_add call fails when adding a partition to the disk.

In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec - Fix memory leak for sec resource release The AIV is one of the SEC resources. When releasing resources, it need to release the AIV resources at the same time. Otherwise, memory leakage occurs. The aiv resource release is added to the sec resource release function.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix firmware crash due to invalid peer nss Currently, if the access point receives an association request containing an Extended HE Capabilities Information Element with an invalid MCS-NSS, it triggers a firmware crash. This issue arises when EHT-PHY capabilities shows support for a bandwidth and MCS-NSS set for that particular bandwidth is filled by zeros and due to this, driver obtains peer_nss as 0 and sending this value to firmware causes crash. Address this issue by implementing a validation step for the peer_nss value before passing it to the firmware. If the value is greater than zero, proceed with forwarding it to the firmware. However, if the value is invalid, reject the association request to prevent potential firmware crashes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: ppp: reject claimed-as-LCP but actually malformed packets Since 'ppp_async_encode()' assumes valid LCP packets (with code from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that LCP packet has an actual body beyond PPP_LCP header bytes, and reject claimed-as-LCP but actually malformed data otherwise.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: pause TCM when the firmware is stopped Not doing so will make us send a host command to the transport while the firmware is not alive, which will trigger a WARNING. bad state = 0 WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] Call Trace: <TASK> iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm] iwl_mvm_config_scan+0x198/0x260 [iwlmvm] iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm] iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm] process_one_work+0x29e/0x640 worker_thread+0x2df/0x690 ? rescuer_thread+0x540/0x540 kthread+0x192/0x1e0 ? set_kthread_struct+0x90/0x90 ret_from_fork+0x22/0x30

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: wext: add extra SIOCSIWSCAN data check In 'cfg80211_wext_siwscan()', add extra check whether number of channels passed via 'ioctl(sock, SIOCSIWSCAN, ...)' doesn't exceed IW_MAX_FREQUENCIES and reject invalid request with -EINVAL otherwise.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug on rename operation of broken directory Syzbot reported that in rename directory operation on broken directory on nilfs2, __block_write_begin_int() called to prepare block write may fail BUG_ON check for access exceeding the folio/page size. This is because nilfs_dotdot(), which gets parent directory reference entry ("..") of the directory to be moved or renamed, does not check consistency enough, and may return location exceeding folio/page size for broken directories. Fix this issue by checking required directory entries ("." and "..") in the first chunk of the directory in nilfs_dotdot().

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Init the count variable in collecting hot-reset devices The count variable is used without initialization, it results in mistakes in the device counting and crashes the userspace if the get hot reset info path is triggered.

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception() There is no support for HWPOISON, MEMORY_FAILURE, or ARCH_HAS_COPY_MC on s390. Therefore we do not expect to see VM_FAULT_HWPOISON in do_exception(). However, since commit af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more general"), it is possible to see VM_FAULT_HWPOISON in combination with PTE_MARKER_POISONED, even on architectures that do not support HWPOISON otherwise. In this case, we will end up on the BUG() in do_exception(). Fix this by treating VM_FAULT_HWPOISON the same as VM_FAULT_SIGBUS, similar to x86 when MEMORY_FAILURE is not configured. Also print unexpected fault flags, for easier debugging. Note that VM_FAULT_HWPOISON_LARGE is not expected, because s390 cannot support swap entries on other levels than PTE level.

In the Linux kernel, the following vulnerability has been resolved: mips: bmips: BCM6358: make sure CBR is correctly set It was discovered that some device have CBR address set to 0 causing kernel panic when arch_sync_dma_for_cpu_all is called. This was notice in situation where the system is booted from TP1 and BMIPS_GET_CBR() returns 0 instead of a valid address and !!(read_c0_brcm_cmt_local() & (1 << 31)); not failing. The current check whether RAC flush should be disabled or not are not enough hence lets check if CBR is a valid address or not.

In the Linux kernel, the following vulnerability has been resolved: bpf, lsm: Add check for BPF LSM return value A bpf prog returning a positive number attached to file_alloc_security hook makes kernel panic. This happens because file system can not filter out the positive number returned by the LSM prog using IS_ERR, and misinterprets this positive number as a file pointer. Given that hook file_alloc_security never returned positive number before the introduction of BPF LSM, and other BPF LSM hooks may encounter similar issues, this patch adds LSM return value check in verifier, to ensure no unexpected value is returned.

In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Fix sclp_init() cleanup on failure If sclp_init() fails it only partially cleans up: if there are multiple failing calls to sclp_init() sclp_state_change_event will be added several times to sclp_reg_list, which results in the following warning: ------------[ cut here ]------------ list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10. WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3 Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 ... Call Trace: [<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8 ([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8) [<000003ffe0a8d37e>] sclp_init+0x40e/0x450 [<000003ffe00009f2>] do_one_initcall+0x42/0x1e0 [<000003ffe15b77a6>] do_initcalls+0x126/0x150 [<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8 [<000003ffe0d6650e>] kernel_init+0x2e/0x180 [<000003ffe000301c>] __ret_from_fork+0x3c/0x60 [<000003ffe0d759ca>] ret_from_fork+0xa/0x30 Fix this by removing sclp_state_change_event from sclp_reg_list when sclp_init() fails.

A NULL pointer dereference was found in the Linux kernel's KVM when dirty ring logging is enabled without an active vCPU context. An unprivileged local attacker on the host may use this flaw to cause a kernel oops condition and thus a denial of service by issuing a KVM_XEN_HVM_SET_ATTR ioctl. This flaw affects Linux kernel versions prior to 5.17-rc1.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix spin_unlock_irqrestore() called with IRQs enabled Fix missuse of spin_lock_irq()/spin_unlock_irq() when spin_lock_irqsave()/spin_lock_irqrestore() was hold. This was discovered through the lock debugging, and the corresponding log is as follows: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 96 PID: 2074 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40 ... Call trace: warn_bogus_irq_restore+0x30/0x40 _raw_spin_unlock_irqrestore+0x84/0xc8 add_qp_to_list+0x11c/0x148 [hns_roce_hw_v2] hns_roce_create_qp_common.constprop.0+0x240/0x780 [hns_roce_hw_v2] hns_roce_create_qp+0x98/0x160 [hns_roce_hw_v2] create_qp+0x138/0x258 ib_create_qp_kernel+0x50/0xe8 create_mad_qp+0xa8/0x128 ib_mad_port_open+0x218/0x448 ib_mad_init_device+0x70/0x1f8 add_client_context+0xfc/0x220 enable_device_and_get+0xd0/0x140 ib_register_device.part.0+0xf4/0x1c8 ib_register_device+0x34/0x50 hns_roce_register_device+0x174/0x3d0 [hns_roce_hw_v2] hns_roce_init+0xfc/0x2c0 [hns_roce_hw_v2] __hns_roce_hw_v2_init_instance+0x7c/0x1d0 [hns_roce_hw_v2] hns_roce_hw_v2_init_instance+0x9c/0x180 [hns_roce_hw_v2]

In the Linux kernel, the following vulnerability has been resolved: net: ena: Add validation for completion descriptors consistency Validate that `first` flag is set only for the first descriptor in multi-buffer packets. In case of an invalid descriptor, a reset will occur. A new reset reason for RX data corruption has been added.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state Pass the already obtained vlan group pointer to br_mst_vlan_set_state() instead of dereferencing it again. Each caller has already correctly dereferenced it for their context. This change is required for the following suspicious RCU dereference fix. No functional changes intended.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine." Undo the modifications made in commit d410ee5109a1 ("ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine.""). The initial purpose of this commit was to stop memory mappings for operation regions from overlapping page boundaries, as it can trigger warnings if different page attributes are present. However, it was found that when this situation arises, mapping continues until the boundary's end, but there is still an attempt to read/write the entire length of the map, leading to a NULL pointer deference. For example, if a four-byte mapping request is made but only one byte is mapped because it hits the current page boundary's end, a four-byte read/write attempt is still made, resulting in a NULL pointer deference. Instead, map the entire length, as the ACPI specification does not mandate that it must be within the same page boundary. It is permissible for it to be mapped across different regions.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/client: add missing bo locking in show_meminfo() bo_meminfo() wants to inspect bo state like tt and the ttm resource, however this state can change at any point leading to stuff like NPD and UAF, if the bo lock is not held. Grab the bo lock when calling bo_meminfo(), ensuring we drop any spinlocks first. In the case of object_idr we now also need to hold a ref. v2 (MattB) - Also add xe_bo_assert_held() (cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: Allocate memory for driver private data Fix driver not allocating memory for struct btintel_data which is used to store internal data.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate: fix memory leak on CPU EPP exit The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is not freed in the analogous exit function, so fix that. [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: discard write access to the directory open may_open() does not allow a directory to be opened with the write access. However, some writing flags set by client result in adding write access on server, making ksmbd incompatible with FUSE file system. Simply, let's discard the write access when opening a directory. list_add corruption. next is NULL. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:26! pc : __list_add_valid+0x88/0xbc lr : __list_add_valid+0x88/0xbc Call trace: __list_add_valid+0x88/0xbc fuse_finish_open+0x11c/0x170 fuse_open_common+0x284/0x5e8 fuse_dir_open+0x14/0x24 do_dentry_open+0x2a4/0x4e0 dentry_open+0x50/0x80 smb2_open+0xbe4/0x15a4 handle_ksmbd_work+0x478/0x5ec process_one_work+0x1b4/0x448 worker_thread+0x25c/0x430 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: Fix of_k3_udma_glue_parse_chn_by_id() The of_k3_udma_glue_parse_chn_by_id() helper function erroneously invokes "of_node_put()" on the "udmax_np" device-node passed to it, without having incremented its reference count at any point. Fix it.

In the Linux kernel, the following vulnerability has been resolved: MIPS: Octeon: Add PCIe link status check The standard PCIe configuration read-write interface is used to access the configuration space of the peripheral PCIe devices of the mips processor after the PCIe link surprise down, it can generate kernel panic caused by "Data bus error". So it is necessary to add PCIe link status check for system protection. When the PCIe link is down or in training, assigning a value of 0 to the configuration address can prevent read-write behavior to the configuration space of peripheral PCIe devices, thereby preventing kernel panic.

In the Linux kernel, the following vulnerability has been resolved: mm: huge_memory: fix misused mapping_large_folio_support() for anon folios When I did a large folios split test, a WARNING "[ 5059.122759][ T166] Cannot split file folio to non-0 order" was triggered. But the test cases are only for anonmous folios. while mapping_large_folio_support() is only reasonable for page cache folios. In split_huge_page_to_list_to_order(), the folio passed to mapping_large_folio_support() maybe anonmous folio. The folio_test_anon() check is missing. So the split of the anonmous THP is failed. This is also the same for shmem_mapping(). We'd better add a check for both. But the shmem_mapping() in __split_huge_page() is not involved, as for anonmous folios, the end parameter is set to -1, so (head[i].index >= end) is always false. shmem_mapping() is not called. Also add a VM_WARN_ON_ONCE() in mapping_large_folio_support() for anon mapping, So we can detect the wrong use more easily. THP folios maybe exist in the pagecache even the file system doesn't support large folio, it is because when CONFIG_TRANSPARENT_HUGEPAGE is enabled, khugepaged will try to collapse read-only file-backed pages to THP. But the mapping does not actually support multi order large folios properly. Using /sys/kernel/debug/split_huge_pages to verify this, with this patch, large anon THP is successfully split and the warning is ceased.