In the Linux kernel, the following vulnerability has been resolved: iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source When simple_write_to_buffer() succeeds, it returns the number of bytes actually copied to the buffer. The code incorrectly uses 'count' as the index for null termination instead of the actual bytes copied. If count exceeds the buffer size, this leads to out-of-bounds write. Add a check for the count and use the return value as the index. The bug was validated using a demo module that mirrors the original code and was tested under QEMU. Pattern of the bug: - A fixed 64-byte stack buffer is filled using count. - If count > 64, the code still does buf[count] = '\0', causing an - out-of-bounds write on the stack. Steps for reproduce: - Opens the device node. - Writes 128 bytes of A to it. - This overflows the 64-byte stack buffer and KASAN reports the OOB. Found via static analysis. This is similar to the commit da9374819eb3 ("iio: backend: fix out-of-bound write")

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Fix metalist update behavior Whenever an ife action replace changes the metalist, instead of replacing the old data on the metalist, the current ife code is appending the new metadata. Aside from being innapropriate behavior, this may lead to an unbounded addition of metadata to the metalist which might cause an out of bounds error when running the encode op: [ 138.423369][ C1] ================================================================== [ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255 [ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full) [ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 138.425800][ C1] Call Trace: [ 138.425804][ C1] <IRQ> [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122) [ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1)) [ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597) [ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1)) [ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2)) [ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171) [ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57) [ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114) [ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3)) [ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45) [ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879) To solve this issue, fix the replace behavior by adding the metalist to the ife rcu data structure.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: Fix interrupt storm after receiving bad if_id in IRQ handler Commit 31a7a0bbeb00 ("dpaa2-switch: add bounds check for if_id in IRQ handler") introduces a range check for if_id to avoid an out-of-bounds access. If an out-of-bounds if_id is detected, the interrupt status is not cleared. This may result in an interrupt storm. Clear the interrupt status after detecting an out-of-bounds if_id to avoid the problem. Found by an experimental AI code review agent at Google.

In the Linux kernel, the following vulnerability has been resolved: rust_binder: correctly handle FDA objects of length zero Fix a bug where an empty FDA (fd array) object with 0 fds would cause an out-of-bounds error. The previous implementation used `skip == 0` to mean "this is a pointer fixup", but 0 is also the correct skip length for an empty FDA. If the FDA is at the end of the buffer, then this results in an attempt to write 8-bytes out of bounds. This is caught and results in an EINVAL error being returned to userspace. The pattern of using `skip == 0` as a special value originates from the C-implementation of Binder. As part of fixing this bug, this pattern is replaced with a Rust enum. I considered the alternate option of not pushing a fixup when the length is zero, but I think it's cleaner to just get rid of the zero-is-special stuff. The root cause of this bug was diagnosed by Gemini CLI on first try. I used the following prompt: > There appears to be a bug in @drivers/android/binder/thread.rs where > the Fixups oob bug is triggered with 316 304 316 324. This implies > that we somehow ended up with a fixup where buffer A has a pointer to > buffer B, but the pointer is located at an index in buffer A that is > out of bounds. Please investigate the code to find the bug. You may > compare with @drivers/android/binder.c that implements this correctly.

In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X interrupt to the host using a writel(), which generates a PCI posted write transaction. There's no completion for posted writes, so the writel() may return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also unmaps the outbound ATU entry used for the PCI write, so the write races with the unmap. If the PCI write loses the race with the ATU unmap, the write may corrupt host memory or cause IOMMU errors, e.g., these when running fio with a larger queue depth against nvmet-pci-epf: arm-smmu-v3 fc900000.iommu: 0x0000010000000010 arm-smmu-v3 fc900000.iommu: 0x0000020000000000 arm-smmu-v3 fc900000.iommu: 0x000000090000f040 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0 arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0 Flush the write by performing a readl() of the same address to ensure that the write has reached the destination before the ATU entry is unmapped. The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit 8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there it was solved by dedicating an outbound iATU only for MSI. We can't do the same for MSI-X because each vector can have a different msg_addr and the msg_addr may be changed while the vector is masked. [bhelgaas: commit log]

In the Linux kernel, the following vulnerability has been resolved: tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow The dma_map_sg tracepoint can trigger a perf buffer overflow when tracing large scatter-gather lists. With devices like virtio-gpu creating large DRM buffers, nents can exceed 1000 entries, resulting in: phys_addrs: 1000 * 8 bytes = 8,000 bytes dma_addrs: 1000 * 8 bytes = 8,000 bytes lengths: 1000 * 4 bytes = 4,000 bytes Total: ~20,000 bytes This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing: WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405 perf buffer not large enough, wanted 24620, have 8192 Cap all three dynamic arrays at 128 entries using min() in the array size calculation. This ensures arrays are only as large as needed (up to the cap), avoiding unnecessary memory allocation for small operations while preventing overflow for large ones. The tracepoint now records the full nents/ents counts and a truncated flag so users can see when data has been capped. Changes in v2: - Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from Steven Rostedt) - This allocates only what's needed up to the cap, avoiding waste for small operations Reviwed-by: Sean Anderson <sean.anderson@linux.dev>

In the Linux kernel, the following vulnerability has been resolved: hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver The recently added macsmc-hwmon driver contained several critical bugs in its sensor population logic and float conversion routines. Specifically: - The voltage sensor population loop used the wrong prefix ("volt-" instead of "voltage-") and incorrectly assigned sensors to the temperature sensor array (hwmon->temp.sensors) instead of the voltage sensor array (hwmon->volt.sensors). This would lead to out-of-bounds memory access or data corruption when both temperature and voltage sensors were present. - The float conversion in macsmc_hwmon_write_f32() had flawed exponent logic for values >= 2^24 and lacked masking for the mantissa, which could lead to incorrect values being written to the SMC. Fix these issues to ensure correct sensor registration and reliable manual fan control. Confirm that the reported overflow in FIELD_PREP is fixed by declaring macsmc_hwmon_write_f32() as __always_inline for a compile test.

In the Linux kernel through 3.2, the rds_message_alloc_sgs() function does not validate a value that is used during DMA page allocation, leading to a heap-based out-of-bounds write (related to the rds_rdma_extra_size function in net/rds/rdma.c).

In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Fix buffer overflow in config retrieval The scarlett2_usb_get_config() function has a logic error in the endianness conversion code that can cause buffer overflows when count > 1. The code checks `if (size == 2)` where `size` is the total buffer size in bytes, then loops `count` times treating each element as u16 (2 bytes). This causes the loop to access `count * 2` bytes when the buffer only has `size` bytes allocated. Fix by checking the element size (config_item->size) instead of the total buffer size. This ensures the endianness conversion matches the actual element type.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack-out-of-bounds write in devmap get_upper_ifindexes() iterates over all upper devices and writes their indices into an array without checking bounds. Also the callers assume that the max number of upper devices is MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack, but that assumption is not correct and the number of upper devices could be larger than MAX_NEST_DEV (e.g., many macvlans), causing a stack-out-of-bounds write. Add a max parameter to get_upper_ifindexes() to avoid the issue. When there are too many upper devices, return -EOVERFLOW and abort the redirect. To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS. Then send a packet to the device to trigger the XDP redirect path.

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix fragment node deletion to prevent buffer leak After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"), the list_node field is reused for both the xskb pool list and the buffer free list, this causes a buffer leak as described below. xp_free() checks if a buffer is already on the free list using list_empty(&xskb->list_node). When list_del() is used to remove a node from the xskb pool list, it doesn't reinitialize the node pointers. This means list_empty() will return false even after the node has been removed, causing xp_free() to incorrectly skip adding the buffer to the free list. Fix this by using list_del_init() instead of list_del() in all fragment handling paths, this ensures the list node is reinitialized after removal, allowing the list_empty() to work correctly.

In the Linux kernel, the following vulnerability has been resolved: xdp: produce a warning when calculated tailroom is negative Many ethernet drivers report xdp Rx queue frag size as being the same as DMA write size. However, the only user of this field, namely bpf_xdp_frags_increase_tail(), clearly expects a truesize. Such difference leads to unspecific memory corruption issues under certain circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses all DMA-writable space in 2 buffers. This would be fine, if only rxq->frag_size was properly set to 4K, but value of 3K results in a negative tailroom, because there is a non-zero page offset. We are supposed to return -EINVAL and be done with it in such case, but due to tailroom being stored as an unsigned int, it is reported to be somewhere near UINT_MAX, resulting in a tail being grown, even if the requested offset is too much (it is around 2K in the abovementioned test). This later leads to all kinds of unspecific calltraces. [ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6 [ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4 [ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000] [ 7340.339230] in xskxceiver[42b5,400000+69000] [ 7340.340300] likely on CPU 6 (core 0, socket 6) [ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe [ 7340.340888] likely on CPU 3 (core 0, socket 3) [ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7 [ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI [ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy) [ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 [ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80 [ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89 [ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202 [ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010 [ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff [ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0 [ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0 [ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500 [ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000 [ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0 [ 7340.421237] PKRU: 55555554 [ 7340.421623] Call Trace: [ 7340.421987] <TASK> [ 7340.422309] ? softleaf_from_pte+0x77/0xa0 [ 7340.422855] swap_pte_batch+0xa7/0x290 [ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270 [ 7340.424102] zap_pte_range+0x281/0x580 [ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240 [ 7340.425177] unmap_page_range+0x24d/0x420 [ 7340.425714] unmap_vmas+0xa1/0x180 [ 7340.426185] exit_mmap+0xe1/0x3b0 [ 7340.426644] __mmput+0x41/0x150 [ 7340.427098] exit_mm+0xb1/0x110 [ 7340.427539] do_exit+0x1b2/0x460 [ 7340.427992] do_group_exit+0x2d/0xc0 [ 7340.428477] get_signal+0x79d/0x7e0 [ 7340.428957] arch_do_signal_or_restart+0x34/0x100 [ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0 [ 7340.430159] do_syscall_64+0x188/ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext() The "exc->key_len" is a u16 that comes from the user. If it's over IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes [WHY] When PTEBufferSizeInRequests is zero, UBSAN reports the following warning because dml_log2 returns an unexpected negative value: shift exponent 4294966273 is too large for 32-bit type 'int' [HOW] In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and assign the result directly.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can lead to the use of wrong `CIDR_POS(c)` for calculating array offsets, which can lead to integer underflow. As a result, it leads to slab out-of-bound access. This patch adds back the IP_SET_HASH_WITH_NET0 macro to ip_set_hash_netportnet to address the issue.

In the Linux kernel, the following vulnerability has been resolved: macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") added one additional attribute named IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff. However, it forgot to describe the nla_policy at macvlan_policy (drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer can be faked as empty (0 bytes) by a malicious user, which could leads to OOB in heap just like CVE-2023-3773. To fix it, this commit just completes the nla_policy description for IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the potential OOB read.

In the Linux kernel, the following vulnerability has been resolved: iavf: fix out-of-bounds writes in iavf_get_ethtool_stats() iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the value could change in runtime, we should use num_tx_queues instead. Moreover iavf_get_ethtool_stats() uses num_active_queues while iavf_get_sset_count() and iavf_get_stat_strings() use real_num_tx_queues, which triggers out-of-bounds writes when we do "ethtool -L" and "ethtool -S" simultaneously [1]. For example when we change channels from 1 to 8, Thread 3 could be scheduled before Thread 2, and out-of-bounds writes could be triggered in Thread 3: Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S) iavf_set_channels() ... iavf_alloc_queues() -> num_active_queues = 8 iavf_schedule_finish_config() iavf_get_sset_count() real_num_tx_queues: 1 -> buffer for 1 queue iavf_get_ethtool_stats() num_active_queues: 8 -> out-of-bounds! iavf_finish_config() -> real_num_tx_queues = 8 Use immutable num_tx_queues in all related functions to avoid the issue. [1] BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270 Write of size 8 at addr ffffc900031c9080 by task ethtool/5800 CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x180 iavf_add_one_ethtool_stat+0x200/0x270 iavf_get_ethtool_stats+0x14c/0x2e0 __dev_ethtool+0x3d0c/0x5830 dev_ethtool+0x12d/0x270 dev_ioctl+0x53c/0xe30 sock_do_ioctl+0x1a9/0x270 sock_ioctl+0x3d4/0x5e0 __x64_sys_ioctl+0x137/0x1c0 do_syscall_64+0xf3/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7da0e6e36d ... </TASK> The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813a013de0 pfn:0x13a013 flags: 0x200000000000000(node=0|zone=2) raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output syzkaller reportes a KASAN issue with stack-out-of-bounds. The call trace is as follows: dump_stack+0x9c/0xd3 print_address_description.constprop.0+0x19/0x170 __kasan_report.cold+0x6c/0x84 kasan_report+0x3a/0x50 __perf_event_header__init_id+0x34/0x290 perf_event_header__init_id+0x48/0x60 perf_output_begin+0x4a4/0x560 perf_event_bpf_output+0x161/0x1e0 perf_iterate_sb_cpu+0x29e/0x340 perf_iterate_sb+0x4c/0xc0 perf_event_bpf_event+0x194/0x2c0 __bpf_prog_put.constprop.0+0x55/0xf0 __cls_bpf_delete_prog+0xea/0x120 [cls_bpf] cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf] process_one_work+0x3c2/0x730 worker_thread+0x93/0x650 kthread+0x1b8/0x210 ret_from_fork+0x1f/0x30 commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()") use on-stack struct perf_sample_data of the caller function. However, perf_event_bpf_output uses incorrect parameter to convert small-sized data (struct perf_bpf_event) into large-sized data (struct perf_sample_data), which causes memory overwriting occurs in __perf_event_header__init_id.

In the Linux kernel, the following vulnerability has been resolved: arm64/sme: Set new vector length before reallocating As part of fixing the allocation of the buffer for SVE state when changing SME vector length we introduced an immediate reallocation of the SVE state, this is also done when changing the SVE vector length for consistency. Unfortunately this reallocation is done prior to writing the new vector length to the task struct, meaning the allocation is done with the old vector length and can lead to memory corruption due to an undersized buffer being used. Move the update of the vector length before the allocation to ensure that the new vector length is taken into account. For some reason this isn't triggering any problems when running tests on the arm64 fixes branch (even after repeated tries) but is triggering issues very often after merge into mainline.

In the Linux kernel, the following vulnerability has been resolved: vdpa: Add features attr to vdpa_nl_policy for nlattr length check The vdpa_nl_policy structure is used to validate the nlattr when parsing the incoming nlmsg. It will ensure the attribute being described produces a valid nlattr pointer in info->attrs before entering into each handler in vdpa_nl_ops. That is to say, the missing part in vdpa_nl_policy may lead to illegal nlattr after parsing, which could lead to OOB read just like CVE-2023-3773. This patch adds the missing nla_policy for vdpa features attr to avoid such bugs.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid mapping wrong physical block for swapfile Xiaolong Guo reported a f2fs bug in bugzilla [1] [1] https://bugzilla.kernel.org/show_bug.cgi?id=220951 Quoted: "When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+, the system experiences data corruption leading to either: 1 dm-verity corruption errors and device reboot 2 F2FS node corruption errors and boot hangs The issue occurs specifically when: 1 Using F2FS filesystem (ext4 is unaffected) 2 Swapfile size is less than F2FS section size (2MB) 3 Swapfile has fragmented physical layout (multiple non-contiguous extents) 4 Kernel version is 6.6+ (6.1 is unaffected) The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the first extent of a small swapfile (< 2MB) is not aligned to section boundaries, the function incorrectly treats it as the last extent, failing to map subsequent extents. This results in incorrect swap_extent creation where only the first extent is mapped, causing subsequent swap writes to overwrite wrong physical locations (other files' data). Steps to Reproduce 1 Setup a device with F2FS-formatted userdata partition 2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng 3 Run swap stress test: (Android devices) adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60 --swap 0" Log: 1 Ftrace shows in kernel 6.6, only first extent is mapped during second f2fs_map_blocks call in check_swap_activate(): stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start blkaddr=0x43143, len=0x1 (Only 4KB mapped, not the full swapfile) 2 in kernel 6.1, both extents are correctly mapped: stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start blkaddr=0x13cd4, len=0x1 stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start blkaddr=0x60c84b, len=0xff The problematic code is in check_swap_activate(): if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec || nr_pblocks % blks_per_sec || !f2fs_valid_pinned_area(sbi, pblock)) { bool last_extent = false; not_aligned++; nr_pblocks = roundup(nr_pblocks, blks_per_sec); if (cur_lblock + nr_pblocks > sis->max) nr_pblocks -= blks_per_sec; /* this extent is last one */ if (!nr_pblocks) { nr_pblocks = last_lblock - cur_lblock; last_extent = true; } ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks); if (ret) { if (ret == -ENOENT) ret = -EINVAL; goto out; } if (!last_extent) goto retry; } When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec) exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The code then incorrectly assumes this is the last extent, sets nr_pblocks = last_lblock - cur_lblock (entire swapfile), and performs migration. After migration, it doesn't retry mapping, so subsequent extents are never processed. " In order to fix this issue, we need to lookup block mapping info after we migrate all blocks in the tail of swapfile.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Prevent excessive number of frames In this case, the user constructed the parameters with maxpacksize 40 for rate 22050 / pps 1000, and packsize[0] 22 packsize[1] 23. The buffer size for each data URB is maxpacksize * packets, which in this example is 40 * 6 = 240; When the user performs a write operation to send audio data into the ALSA PCM playback stream, the calculated number of frames is packsize[0] * packets = 264, which exceeds the allocated URB buffer size, triggering the out-of-bounds (OOB) issue reported by syzbot [1]. Added a check for the number of single data URB frames when calculating the number of frames to prevent [1]. [1] BUG: KASAN: slab-out-of-bounds in copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487 Write of size 264 at addr ffff88804337e800 by task syz.0.17/5506 Call Trace: copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487 prepare_playback_urb+0x953/0x13d0 sound/usb/pcm.c:1611 prepare_outbound_urb+0x377/0xc50 sound/usb/endpoint.c:333

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after failed write When buffered write fails to copy data into underlying page cache page, ocfs2_write_end_nolock() just zeroes out and dirties the page. This can leave dirty page beyond EOF and if page writeback tries to write this page before write succeeds and expands i_size, page gets into inconsistent state where page dirty bit is clear but buffer dirty bits stay set resulting in page data never getting written and so data copied to the page is lost. Fix the problem by invalidating page beyond EOF after failed write.

In the Linux kernel, the following vulnerability has been resolved: media: i2c: ds90ub9x3: Fix extra fwnode_handle_put() The ub913 and ub953 drivers call fwnode_handle_put(priv->sd.fwnode) as part of their remove process, and if the driver is removed multiple times, eventually leads to put "overflow", possibly causing memory corruption or crash. The fwnode_handle_put() is a leftover from commit 905f88ccebb1 ("media: i2c: ds90ub9x3: Fix sub-device matching"), which changed the code related to the sd.fwnode, but missed removing these fwnode_handle_put() calls.

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix gmap_helper_zap_one_page() again A few checks were missing in gmap_helper_zap_one_page(), which can lead to memory corruption in the guest under specific circumstances. Add the missing checks.

In the Linux kernel, the following vulnerability has been resolved: mailbox: th1520: Fix memory corruption due to incorrect array size The functions th1520_mbox_suspend_noirq and th1520_mbox_resume_noirq are intended to save and restore the interrupt mask registers in the MBOX ICU0. However, the array used to store these registers was incorrectly sized, leading to memory corruption when accessing all four registers. This commit corrects the array size to accommodate all four interrupt mask registers, preventing memory corruption during suspend and resume operations.

In the Linux kernel, the following vulnerability has been resolved: media: intel/ipu6: remove cpu latency qos request on error Fix cpu latency qos list corruption like below. It happens when we do not remove cpu latency request on error path and free corresponding memory. [ 30.634378] l7 kernel: list_add corruption. prev->next should be next (ffffffff9645e960), but was 0000000100100001. (prev=ffff8e9e877e20a8). [ 30.634388] l7 kernel: WARNING: CPU: 2 PID: 2008 at lib/list_debug.c:32 __list_add_valid_or_report+0x83/0xa0 <snip> [ 30.634640] l7 kernel: Call Trace: [ 30.634650] l7 kernel: <TASK> [ 30.634659] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634669] l7 kernel: ? __warn.cold+0x93/0xf6 [ 30.634678] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634690] l7 kernel: ? report_bug+0xff/0x140 [ 30.634702] l7 kernel: ? handle_bug+0x58/0x90 [ 30.634712] l7 kernel: ? exc_invalid_op+0x17/0x70 [ 30.634723] l7 kernel: ? asm_exc_invalid_op+0x1a/0x20 [ 30.634733] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634742] l7 kernel: plist_add+0xdd/0x140 [ 30.634754] l7 kernel: pm_qos_update_target+0xa0/0x1f0 [ 30.634764] l7 kernel: cpu_latency_qos_update_request+0x61/0xc0 [ 30.634773] l7 kernel: intel_dp_aux_xfer+0x4c7/0x6e0 [i915 1f824655ed04687c2b0d23dbce759fa785f6d033]

In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add The driver does not set hw->sta_data_size, which causes mac80211 to allocate insufficient space for driver private station data in __sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of struct rtl8xxxu_sta_info through sta->drv_priv, this results in a slab-out-of-bounds write. KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter: BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346 Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12 Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during probe, similar to how hw->vif_data_size is configured. This ensures mac80211 allocates sufficient space for the driver's per-station private data. Tested on StarFive VisionFive 2 v1.2A board.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix "UBSAN: shift-out-of-bounds error" This patch ensures that the RX ring size (rx_pending) is not set below the permitted length. This avoids UBSAN shift-out-of-bounds errors when users passes small or zero ring sizes via ethtool -G.

In the Linux kernel, the following vulnerability has been resolved: rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read The nvmem interface supports variable buffer sizes, while the regmap interface operates with fixed-size storage. If an nvmem client uses a buffer size less than 4 bytes, regmap_read will write out of bounds as it expects the buffer to point at an unsigned int. Fix this by using an intermediary unsigned int to hold the value.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: mt8183: Add back SSPM related clocks This reverts commit 860690a93ef23b567f781c1b631623e27190f101. On the MT8183, the SSPM related clocks were removed claiming a lack of usage. This however causes some issues when the driver was converted to the new simple-probe mechanism. This mechanism allocates enough space for all the clocks defined in the clock driver, not the highest index in the DT binding. This leads to out-of-bound writes if their are holes in the DT binding or the driver (due to deprecated or unimplemented clocks). These errors can go unnoticed and cause memory corruption, leading to crashes in unrelated areas, or nothing at all. KASAN will detect them. Add the SSPM related clocks back to the MT8183 clock driver to fully implement the DT binding. The SSPM clocks are for the power management co-processor, and should never be turned off. They are marked as such.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix OOB write in bnxt_re_copy_err_stats() Commit ef56081d1864 ("RDMA/bnxt_re: RoCE related hardware counters update") added three new counters and placed them after BNXT_RE_OUT_OF_SEQ_ERR. BNXT_RE_OUT_OF_SEQ_ERR acts as a boundary marker for allocating hardware statistics with different num_counters values on chip_gen_p5_p7 devices. As a result, BNXT_RE_NUM_STD_COUNTERS are used when allocating hw_stats, which leads to an out-of-bounds write in bnxt_re_copy_err_stats(). The counters BNXT_RE_REQ_CQE_ERROR, BNXT_RE_RESP_CQE_ERROR, and BNXT_RE_RESP_REMOTE_ACCESS_ERRS are applicable to generic hardware, not only p5/p7 devices. Fix this by moving these counters before BNXT_RE_OUT_OF_SEQ_ERR so they are included in the generic counter set.

In the Linux kernel, the following vulnerability has been resolved: jffs2: Prevent rtime decompress memory corruption The rtime decompression routine does not fully check bounds during the entirety of the decompression pass and can corrupt memory outside the decompression buffer if the compressed data is corrupted. This adds the required check to prevent this failure mode.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Out-of-Bounds Write in ksmbd_vfs_stream_write An offset from client could be a negative value, It could allows to write data outside the bounds of the allocated buffer. Note that this issue is coming when setting 'vfs objects = streams_xattr parameter' in ksmbd.conf.

In the Linux kernel, the following vulnerability has been resolved: xsk: fix OOB map writes when deleting elements Jordy says: " In the xsk_map_delete_elem function an unsigned integer (map->max_entries) is compared with a user-controlled signed integer (k). Due to implicit type conversion, a large unsigned value for map->max_entries can bypass the intended bounds check: if (k >= map->max_entries) return -EINVAL; This allows k to hold a negative value (between -2147483648 and -2), which is then used as an array index in m->xsk_map[k], which results in an out-of-bounds access. spin_lock_bh(&m->lock); map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write if (old_xs) xsk_map_sock_delete(old_xs, map_entry); spin_unlock_bh(&m->lock); The xchg operation can then be used to cause an out-of-bounds write. Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead to further memory corruption. " It indeed results in following splat: [76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108 [76612.904330] #PF: supervisor write access in kernel mode [76612.909639] #PF: error_code(0x0002) - not-present page [76612.914855] PGD 0 P4D 0 [76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP [76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470 [76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60 [76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31 [76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246 [76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000 [76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000 [76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007 [76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8 [76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0 [76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000 [76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0 [76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [76613.041086] PKRU: 55555554 [76613.043842] Call Trace: [76613.046331] <TASK> [76613.048468] ? __die+0x20/0x60 [76613.051581] ? page_fault_oops+0x15a/0x450 [76613.055747] ? search_extable+0x22/0x30 [76613.059649] ? search_bpf_extables+0x5f/0x80 [76613.063988] ? exc_page_fault+0xa9/0x140 [76613.067975] ? asm_exc_page_fault+0x22/0x30 [76613.072229] ? xsk_map_delete_elem+0x2d/0x60 [76613.076573] ? xsk_map_delete_elem+0x23/0x60 [76613.080914] __sys_bpf+0x19b7/0x23c0 [76613.084555] __x64_sys_bpf+0x1a/0x20 [76613.088194] do_syscall_64+0x37/0xb0 [76613.091832] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [76613.096962] RIP: 0033:0x7f80b6d1e88d [76613.100592] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [76613.119631] RSP: 002b:00007ffd1ae0ac68 EFLAGS: 00000206 ORIG_RAX: 0000000000000141 [76613.131330] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f80b6d1e88d [76613.142632] RDX: 0000000000000098 RSI: 00007ffd1ae0ad20 RDI: 0000000000000003 [76613.153967] RBP: 00007ffd1ae0adc0 R08: 0000000000000000 R09: 0000000000000000 [76613.166030] R10: 00007f80b6f77040 R11: 0000000000000206 R12: 00007ffd1ae0aed8 [76613.177130] R13: 000055ddf42ce1e9 R14: 000055ddf42d0d98 R15: 00 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nfs/localio: must clear res.replen in nfs_local_read_done Otherwise memory corruption can occur due to NFSv3 LOCALIO reads leaving garbage in res.replen: - nfs3_read_done() copies that into server->read_hdrsize; from there nfs3_proc_read_setup() copies it to args.replen in new requests. - nfs3_xdr_enc_read3args() passes that to rpc_prepare_reply_pages() which includes it in hdrsize for xdr_init_pages, so that rq_rcv_buf contains a ridiculous len. - This is copied to rq_private_buf and xs_read_stream_request() eventually passes the kvec to sock_recvmsg() which receives incoming data into entirely the wrong place. This is easily reproduced with NFSv3 LOCALIO that is servicing reads when it is made to pivot back to using normal RPC. This switch back to using normal NFSv3 with RPC can occur for a few reasons but this issue was exposed with a test that stops and then restarts the NFSv3 server while LOCALIO is performing heavy read IO.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Use dynamic allocation for CU occupancy array in 'kfd_get_cu_occupancy()' The `kfd_get_cu_occupancy` function previously declared a large `cu_occupancy` array as a local variable, which could lead to stack overflows due to excessive stack usage. This commit replaces the static array allocation with dynamic memory allocation using `kcalloc`, thereby reducing the stack size. This change avoids the risk of stack overflows in kernel space, in scenarios where `AMDGPU_MAX_QUEUES` is large. The allocated memory is freed using `kfree` before the function returns to prevent memory leaks. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c: In function ‘kfd_get_cu_occupancy’: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:322:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 322 | } | ^

In the Linux kernel, the following vulnerability has been resolved: hfsplus: don't query the device logical block size multiple times Devices block sizes may change. One of these cases is a loop device by using ioctl LOOP_SET_BLOCK_SIZE. While this may cause other issues like IO being rejected, in the case of hfsplus, it will allocate a block by using that size and potentially write out-of-bounds when hfsplus_read_wrapper calls hfsplus_submit_bio and the latter function reads a different io_size. Using a new min_io_size initally set to sb_min_blocksize works for the purposes of the original fix, since it will be set to the max between HFSPLUS_SECTOR_SIZE and the first seen logical block size. We still use the max between HFSPLUS_SECTOR_SIZE and min_io_size in case the latter is not initialized. Tested by mounting an hfsplus filesystem with loop block sizes 512, 1024 and 4096. The produced KASAN report before the fix looks like this: [ 419.944641] ================================================================== [ 419.945655] BUG: KASAN: slab-use-after-free in hfsplus_read_wrapper+0x659/0xa0a [ 419.946703] Read of size 2 at addr ffff88800721fc00 by task repro/10678 [ 419.947612] [ 419.947846] CPU: 0 UID: 0 PID: 10678 Comm: repro Not tainted 6.12.0-rc5-00008-gdf56e0f2f3ca #84 [ 419.949007] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 419.950035] Call Trace: [ 419.950384] <TASK> [ 419.950676] dump_stack_lvl+0x57/0x78 [ 419.951212] ? hfsplus_read_wrapper+0x659/0xa0a [ 419.951830] print_report+0x14c/0x49e [ 419.952361] ? __virt_addr_valid+0x267/0x278 [ 419.952979] ? kmem_cache_debug_flags+0xc/0x1d [ 419.953561] ? hfsplus_read_wrapper+0x659/0xa0a [ 419.954231] kasan_report+0x89/0xb0 [ 419.954748] ? hfsplus_read_wrapper+0x659/0xa0a [ 419.955367] hfsplus_read_wrapper+0x659/0xa0a [ 419.955948] ? __pfx_hfsplus_read_wrapper+0x10/0x10 [ 419.956618] ? do_raw_spin_unlock+0x59/0x1a9 [ 419.957214] ? _raw_spin_unlock+0x1a/0x2e [ 419.957772] hfsplus_fill_super+0x348/0x1590 [ 419.958355] ? hlock_class+0x4c/0x109 [ 419.958867] ? __pfx_hfsplus_fill_super+0x10/0x10 [ 419.959499] ? __pfx_string+0x10/0x10 [ 419.960006] ? lock_acquire+0x3e2/0x454 [ 419.960532] ? bdev_name.constprop.0+0xce/0x243 [ 419.961129] ? __pfx_bdev_name.constprop.0+0x10/0x10 [ 419.961799] ? pointer+0x3f0/0x62f [ 419.962277] ? __pfx_pointer+0x10/0x10 [ 419.962761] ? vsnprintf+0x6c4/0xfba [ 419.963178] ? __pfx_vsnprintf+0x10/0x10 [ 419.963621] ? setup_bdev_super+0x376/0x3b3 [ 419.964029] ? snprintf+0x9d/0xd2 [ 419.964344] ? __pfx_snprintf+0x10/0x10 [ 419.964675] ? lock_acquired+0x45c/0x5e9 [ 419.965016] ? set_blocksize+0x139/0x1c1 [ 419.965381] ? sb_set_blocksize+0x6d/0xae [ 419.965742] ? __pfx_hfsplus_fill_super+0x10/0x10 [ 419.966179] mount_bdev+0x12f/0x1bf [ 419.966512] ? __pfx_mount_bdev+0x10/0x10 [ 419.966886] ? vfs_parse_fs_string+0xce/0x111 [ 419.967293] ? __pfx_vfs_parse_fs_string+0x10/0x10 [ 419.967702] ? __pfx_hfsplus_mount+0x10/0x10 [ 419.968073] legacy_get_tree+0x104/0x178 [ 419.968414] vfs_get_tree+0x86/0x296 [ 419.968751] path_mount+0xba3/0xd0b [ 419.969157] ? __pfx_path_mount+0x10/0x10 [ 419.969594] ? kmem_cache_free+0x1e2/0x260 [ 419.970311] do_mount+0x99/0xe0 [ 419.970630] ? __pfx_do_mount+0x10/0x10 [ 419.971008] __do_sys_mount+0x199/0x1c9 [ 419.971397] do_syscall_64+0xd0/0x135 [ 419.971761] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 419.972233] RIP: 0033:0x7c3cb812972e [ 419.972564] Code: 48 8b 0d f5 46 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c2 46 0d 00 f7 d8 64 89 01 48 [ 419.974371] RSP: 002b:00007ffe30632548 EFLAGS: 00000286 ORIG_RAX: 00000000000000a5 [ 419.975048] RAX: ffffffffffffffda RBX: 00007ffe306328d8 RCX: 00007c3cb812972e [ 419.975701] RDX: 0000000020000000 RSI: 0000000020000c80 RDI: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: fix OOB devmap writes when deleting elements Jordy reported issue against XSKMAP which also applies to DEVMAP - the index used for accessing map entry, due to being a signed integer, causes the OOB writes. Fix is simple as changing the type from int to u32, however, when compared to XSKMAP case, one more thing needs to be addressed. When map is released from system via dev_map_free(), we iterate through all of the entries and an iterator variable is also an int, which implies OOB accesses. Again, change it to be u32. Example splat below: [ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000 [ 160.731662] #PF: supervisor read access in kernel mode [ 160.736876] #PF: error_code(0x0000) - not-present page [ 160.742095] PGD 0 P4D 0 [ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP [ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487 [ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 160.767642] Workqueue: events_unbound bpf_map_free_deferred [ 160.773308] RIP: 0010:dev_map_free+0x77/0x170 [ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff [ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202 [ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024 [ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000 [ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001 [ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122 [ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000 [ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000 [ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0 [ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.874092] PKRU: 55555554 [ 160.876847] Call Trace: [ 160.879338] <TASK> [ 160.881477] ? __die+0x20/0x60 [ 160.884586] ? page_fault_oops+0x15a/0x450 [ 160.888746] ? search_extable+0x22/0x30 [ 160.892647] ? search_bpf_extables+0x5f/0x80 [ 160.896988] ? exc_page_fault+0xa9/0x140 [ 160.900973] ? asm_exc_page_fault+0x22/0x30 [ 160.905232] ? dev_map_free+0x77/0x170 [ 160.909043] ? dev_map_free+0x58/0x170 [ 160.912857] bpf_map_free_deferred+0x51/0x90 [ 160.917196] process_one_work+0x142/0x370 [ 160.921272] worker_thread+0x29e/0x3b0 [ 160.925082] ? rescuer_thread+0x4b0/0x4b0 [ 160.929157] kthread+0xd4/0x110 [ 160.932355] ? kthread_park+0x80/0x80 [ 160.936079] ret_from_fork+0x2d/0x50 [ 160.943396] ? kthread_park+0x80/0x80 [ 160.950803] ret_from_fork_asm+0x11/0x20 [ 160.958482] </TASK>

In the Linux kernel, the following vulnerability has been resolved: ice: copy last block omitted in ice_get_module_eeprom() ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") In this refactor, ice_get_module_eeprom() reads the eeprom in blocks of size 8. But the condition that should protect the buffer overflow ignores the last block. The last block always contains zeros. Bug uncovered by ethtool upstream commit 9538f384b535 ("netlink: eeprom: Defer page requests to individual parsers") After this commit, ethtool reads a block with length = 1; to read the SFF-8024 identifier value. unpatched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 00 00 00 00 00 00 $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00 $ $ ethtool -m enp65s0f0np0 Offset Values ------ ------ 0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00 0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 patched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78 $ ethtool -m enp65s0f0np0 Identifier : 0x11 (QSFP28) Extended identifier : 0x00 Extended identifier description : 1.5W max. Power consumption Extended identifier description : No CDR in TX, No CDR in RX Extended identifier description : High Power Class (> 3.5 W) not enabled Connector : 0x23 (No separable connector) Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 40G Ethernet: 40G Base-CR4 Transceiver type : 25G Ethernet: 25G Base-CR CA-N Encoding : 0x05 (64B/66B) BR, Nominal : 25500Mbps Rate identifier : 0x00 Length (SMF,km) : 0km Length (OM3 50um) : 0m Length (OM2 50um) : 0m Length (OM1 62.5um) : 0m Length (Copper or Active cable) : 1m Transmitter technology : 0xa0 (Copper cable unequalized) Attenuation at 2.5GHz : 4db Attenuation at 5.0GHz : 5db Attenuation at 7.0GHz : 7db Attenuation at 12.9GHz : 10db ........ ....

In the Linux kernel, the following vulnerability has been resolved: initramfs: avoid filename buffer overrun The initramfs filename field is defined in Documentation/driver-api/early-userspace/buffer-format.rst as: 37 cpio_file := ALGN(4) + cpio_header + filename + "\0" + ALGN(4) + data ... 55 ============= ================== ========================= 56 Field name Field size Meaning 57 ============= ================== ========================= ... 70 c_namesize 8 bytes Length of filename, including final \0 When extracting an initramfs cpio archive, the kernel's do_name() path handler assumes a zero-terminated path at @collected, passing it directly to filp_open() / init_mkdir() / init_mknod(). If a specially crafted cpio entry carries a non-zero-terminated filename and is followed by uninitialized memory, then a file may be created with trailing characters that represent the uninitialized memory. The ability to create an initramfs entry would imply already having full control of the system, so the buffer overrun shouldn't be considered a security vulnerability. Append the output of the following bash script to an existing initramfs and observe any created /initramfs_test_fname_overrunAA* path. E.g. ./reproducer.sh | gzip >> /myinitramfs It's easiest to observe non-zero uninitialized memory when the output is gzipped, as it'll overflow the heap allocated @out_buf in __gunzip(), rather than the initrd_start+initrd_size block. ---- reproducer.sh ---- nilchar="A" # change to "\0" to properly zero terminate / pad magic="070701" ino=1 mode=$(( 0100777 )) uid=0 gid=0 nlink=1 mtime=1 filesize=0 devmajor=0 devminor=1 rdevmajor=0 rdevminor=0 csum=0 fname="initramfs_test_fname_overrun" namelen=$(( ${#fname} + 1 )) # plus one to account for terminator printf "%s%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%s" \ $magic $ino $mode $uid $gid $nlink $mtime $filesize \ $devmajor $devminor $rdevmajor $rdevminor $namelen $csum $fname termpadlen=$(( 1 + ((4 - ((110 + $namelen) & 3)) % 4) )) printf "%.s${nilchar}" $(seq 1 $termpadlen) ---- reproducer.sh ---- Symlink filename fields handled in do_symlink() won't overrun past the data segment, due to the explicit zero-termination of the symlink target. Fix filename buffer overrun by aborting the initramfs FSM if any cpio entry doesn't carry a zero-terminator at the expected (name_len - 1) offset.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/ufence: Prefetch ufence addr to catch bogus address access_ok() only checks for addr overflow so also try to read the addr to catch invalid addr sent from userspace. (cherry picked from commit 9408c4508483ffc60811e910a93d6425b8e63928)

In the Linux kernel, the following vulnerability has been resolved: ima: fix buffer overrun in ima_eventdigest_init_common Function ima_eventdigest_init() calls ima_eventdigest_init_common() with HASH_ALGO__LAST which is then used to access the array hash_digest_size[] leading to buffer overrun. Have a conditional statement to handle this.

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format This can lead to out of bounds writes since frames of this type were not taken into account when calculating the size of the frames buffer in uvc_parse_streaming.

In the Linux kernel, the following vulnerability has been resolved: clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider Some heap space is allocated for the flexible structure `struct clk_hw_onecell_data` and its flexible-array member `hws` through the composite structure `struct loongson2_clk_provider` in function `loongson2_clk_probe()`, as shown below: 289 struct loongson2_clk_provider *clp; ... 296 for (p = data; p->name; p++) 297 clks_num++; 298 299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num), 300 GFP_KERNEL); Then some data is written into the flexible array: 350 clp->clk_data.hws[p->id] = hw; This corrupts `clk_lock`, which is the spinlock variable immediately following the `clk_data` member in `struct loongson2_clk_provider`: struct loongson2_clk_provider { void __iomem *base; struct device *dev; struct clk_hw_onecell_data clk_data; spinlock_t clk_lock; /* protect access to DIV registers */ }; The problem is that the flexible structure is currently placed in the middle of `struct loongson2_clk_provider` instead of at the end. Fix this by moving `struct clk_hw_onecell_data clk_data;` to the end of `struct loongson2_clk_provider`. Also, add a code comment to help prevent this from happening again in case new members are added to the structure in the future. This change also fixes the following -Wflex-array-member-not-at-end warning: drivers/clk/clk-loongson2.c:32:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]

In the Linux kernel, the following vulnerability has been resolved: KVM: s390/diag: fix racy access of physical cpu number in diag 9c handler We do check for target CPU == -1, but this might change at the time we are going to use it. Hold the physical target CPU in a local variable to avoid out-of-bound accesses to the cpu arrays.

In the Linux kernel, the following vulnerability has been resolved: fbdev: sisfb: Fix strbuf array overflow The values of the variables xres and yres are placed in strbuf. These variables are obtained from strbuf1. The strbuf1 array contains digit characters and a space if the array contains non-digit characters. Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres); more than 16 bytes will be written to strbuf. It is suggested to increase the size of the strbuf array to 24. Found by Linux Verification Center (linuxtesting.org) with SVACE.

An issue was discovered in yurex_read in drivers/usb/misc/yurex.c in the Linux kernel before 4.17.7. Local attackers could use user access read/writes with incorrect bounds checking in the yurex USB driver to crash the kernel or potentially escalate privileges.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync hci_le_big_create_sync() uses DEFINE_FLEX to allocate a struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17) BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31) entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31, the memcpy that copies conn->bis into cp->bis writes up to 14 bytes past the stack buffer, corrupting adjacent stack memory. This is trivially reproducible: binding an ISO socket with bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will eventually trigger hci_le_big_create_sync() from the HCI command sync worker, causing a KASAN-detectable stack-out-of-bounds write: BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0 Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71 Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that conn->bis can actually carry.