In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq() The "instance" variable needs to be signed for the error handling to work.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: mesh: Fix leak of mesh_preq_queue objects The hwmp code use objects of type mesh_preq_queue, added to a list in ieee80211_if_mesh, to keep track of mpath we need to resolve. If the mpath gets deleted, ex mesh interface is removed, the entries in that list will never get cleaned. Fix this by flushing all corresponding items of the preq_queue in mesh_path_flush_pending(). This should take care of KASAN reports like this: unreferenced object 0xffff00000668d800 (size 128): comm "kworker/u8:4", pid 67, jiffies 4295419552 (age 1836.444s) hex dump (first 32 bytes): 00 1f 05 09 00 00 ff ff 00 d5 68 06 00 00 ff ff ..........h..... 8e 97 ea eb 3e b8 01 00 00 00 00 00 00 00 00 00 ....>........... backtrace: [<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c [<00000000049bd418>] kmalloc_trace+0x34/0x80 [<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8 [<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c [<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4 [<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764 [<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4 [<000000004c86e916>] dev_hard_start_xmit+0x174/0x440 [<0000000023495647>] __dev_queue_xmit+0xe24/0x111c [<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4 [<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508 [<00000000adc3cd94>] process_one_work+0x4b8/0xa1c [<00000000b36425d1>] worker_thread+0x9c/0x634 [<0000000005852dd5>] kthread+0x1bc/0x1c4 [<000000005fccd770>] ret_from_fork+0x10/0x20 unreferenced object 0xffff000009051f00 (size 128): comm "kworker/u8:4", pid 67, jiffies 4295419553 (age 1836.440s) hex dump (first 32 bytes): 90 d6 92 0d 00 00 ff ff 00 d8 68 06 00 00 ff ff ..........h..... 36 27 92 e4 02 e0 01 00 00 58 79 06 00 00 ff ff 6'.......Xy..... backtrace: [<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c [<00000000049bd418>] kmalloc_trace+0x34/0x80 [<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8 [<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c [<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4 [<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764 [<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4 [<000000004c86e916>] dev_hard_start_xmit+0x174/0x440 [<0000000023495647>] __dev_queue_xmit+0xe24/0x111c [<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4 [<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508 [<00000000adc3cd94>] process_one_work+0x4b8/0xa1c [<00000000b36425d1>] worker_thread+0x9c/0x634 [<0000000005852dd5>] kthread+0x1bc/0x1c4 [<000000005fccd770>] ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: skmsg: Skip zero length skb in sk_msg_recvmsg When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c.

In the Linux kernel, the following vulnerability has been resolved: fs: Fix uninitialized value issue in from_kuid and from_kgid ocfs2_setattr() uses attr->ia_mode, attr->ia_uid and attr->ia_gid in a trace point even though ATTR_MODE, ATTR_UID and ATTR_GID aren't set. Initialize all fields of newattrs to avoid uninitialized variables, by checking if ATTR_MODE, ATTR_UID, ATTR_GID are initialized, otherwise 0.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data In case the non-paged data of a SKB carries protocol header and protocol payload to be transmitted on a certain platform that the DMA AXI address width is configured to 40-bit/48-bit, or the size of the non-paged data is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI address width is configured to 32-bit, then this SKB requires at least two DMA transmit descriptors to serve it. For example, three descriptors are allocated to split one DMA buffer mapped from one piece of non-paged data: dma_desc[N + 0], dma_desc[N + 1], dma_desc[N + 2]. Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold extra information to be reused in stmmac_tx_clean(): tx_q->tx_skbuff_dma[N + 0], tx_q->tx_skbuff_dma[N + 1], tx_q->tx_skbuff_dma[N + 2]. Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer address returned by DMA mapping call. stmmac_tx_clean() will try to unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf is a valid buffer address. The expected behavior that saves DMA buffer address of this non-paged data to tx_q->tx_skbuff_dma[entry].buf is: tx_q->tx_skbuff_dma[N + 0].buf = NULL; tx_q->tx_skbuff_dma[N + 1].buf = NULL; tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single(); Unfortunately, the current code misbehaves like this: tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single(); tx_q->tx_skbuff_dma[N + 1].buf = NULL; tx_q->tx_skbuff_dma[N + 2].buf = NULL; On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address obviously, then the DMA buffer will be unmapped immediately. There may be a rare case that the DMA engine does not finish the pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go horribly wrong, DMA is going to access a unmapped/unreferenced memory region, corrupted data will be transmited or iommu fault will be triggered :( In contrast, the for-loop that maps SKB fragments behaves perfectly as expected, and that is how the driver should do for both non-paged data and paged frags actually. This patch corrects DMA map/unmap sequences by fixing the array index for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address. Tested and verified on DWXGMAC CORE 3.20a

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: kTLS, Fix incorrect page refcounting The kTLS tx handling code is using a mix of get_page() and page_ref_inc() APIs to increment the page reference. But on the release path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used. This is an issue when using pages from large folios: the get_page() references are stored on the folio page while the page_ref_inc() references are stored directly in the given page. On release the folio page will be dereferenced too many times. This was found while doing kTLS testing with sendfile() + ZC when the served file was read from NFS on a kernel with NFS large folios support (commit 49b29a573da8 ("nfs: add support for large folios")).

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: do not stop RX on failing RX callback RX callbacks can fail for multiple reasons: * Payload too short * Payload formatted incorrecly (e.g. bad NCM framing) * Lack of memory None of these should cause the driver to seize up. Make such failures non-critical and continue processing further incoming URBs.

In the Linux kernel, the following vulnerability has been resolved: f2fs: don't set RO when shutting down f2fs Shutdown does not check the error of thaw_super due to readonly, which causes a deadlock like below. f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread - bdev_freeze - freeze_super - f2fs_stop_checkpoint() - f2fs_handle_critical_error - sb_start_write - set RO - waiting - bdev_thaw - thaw_super_locked - return -EINVAL, if sb_rdonly() - f2fs_stop_discard_thread -> wait for kthread_stop(discard_thread);

In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift When configuring a kernel with PAGE_SIZE=4KB, depending on its setting of CONFIG_CMA_ALIGNMENT, VCMDQ_LOG2SIZE_MAX=19 could fail the alignment test and trigger a WARN_ON: WARNING: at drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:3646 Call trace: arm_smmu_init_one_queue+0x15c/0x210 tegra241_cmdqv_init_structures+0x114/0x338 arm_smmu_device_probe+0xb48/0x1d90 Fix it by capping max_n_shift to CMDQ_MAX_SZ_SHIFT as SMMUv3 CMDQ does.

In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Implement blocking domain This fixes a crash when surprise hot-unplugging a PCI device. This crash happens because during hot-unplug __iommu_group_set_domain_nofail() attaching the default domain fails when the platform no longer recognizes the device as it has already been removed and we end up with a NULL domain pointer and UAF. This is exactly the case referred to in the second comment in __iommu_device_set_domain() and just as stated there if we can instead attach the blocking domain the UAF is prevented as this can handle the already removed device. Implement the blocking domain to use this handling. With this change, the crash is fixed but we still hit a warning attempting to change DMA ownership on a blocked device.

In the Linux kernel, the following vulnerability has been resolved: iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe() When devm_regmap_init_i2c() fails, regmap_ee could be error pointer, instead of checking for IS_ERR(regmap_ee), regmap is checked which looks like a copy paste error.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and txbuf_len are uninitialized. This commit stops to print uninitialized value and misleading/false data.

In the Linux kernel, the following vulnerability has been resolved: ipc: fix memleak if msg_init_ns failed in create_ipc_ns Percpu memory allocation may failed during create_ipc_ns however this fail is not handled properly since ipc sysctls and mq sysctls is not released properly. Fix this by release these two resource when failure. Here is the kmemleak stack when percpu failed: unreferenced object 0xffff88819de2a600 (size 512): comm "shmem_2nstest", pid 120711, jiffies 4300542254 hex dump (first 32 bytes): 60 aa 9d 84 ff ff ff ff fc 18 48 b2 84 88 ff ff `.........H..... 04 00 00 00 a4 01 00 00 20 e4 56 81 ff ff ff ff ........ .V..... backtrace (crc be7cba35): [<ffffffff81b43f83>] __kmalloc_node_track_caller_noprof+0x333/0x420 [<ffffffff81a52e56>] kmemdup_noprof+0x26/0x50 [<ffffffff821b2f37>] setup_mq_sysctls+0x57/0x1d0 [<ffffffff821b29cc>] copy_ipcs+0x29c/0x3b0 [<ffffffff815d6a10>] create_new_namespaces+0x1d0/0x920 [<ffffffff815d7449>] copy_namespaces+0x2e9/0x3e0 [<ffffffff815458f3>] copy_process+0x29f3/0x7ff0 [<ffffffff8154b080>] kernel_clone+0xc0/0x650 [<ffffffff8154b6b1>] __do_sys_clone+0xa1/0xe0 [<ffffffff843df8ff>] do_syscall_64+0xbf/0x1c0 [<ffffffff846000b0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers Check that all fields of a V2 algorithm header fit into the available firmware data buffer. The wmfw V2 format introduced variable-length strings in the algorithm block header. This means the overall header length is variable, and the position of most fields varies depending on the length of the string fields. Each field must be checked to ensure that it does not overflow the firmware data buffer. As this ia bugfix patch, the fixes avoid making any significant change to the existing code. This makes it easier to review and less likely to introduce new bugs.

In the Linux kernel, the following vulnerability has been resolved: xen: Fix the issue of resource not being properly released in xenbus_dev_probe() This patch fixes an issue in the function xenbus_dev_probe(). In the xenbus_dev_probe() function, within the if (err) branch at line 313, the program incorrectly returns err directly without releasing the resources allocated by err = drv->probe(dev, id). As the return value is non-zero, the upper layers assume the processing logic has failed. However, the probe operation was performed earlier without a corresponding remove operation. Since the probe actually allocates resources, failing to perform the remove operation could lead to problems. To fix this issue, we followed the resource release logic of the xenbus_dev_remove() function by adding a new block fail_remove before the fail_put block. After entering the branch if (err) at line 313, the function will use a goto statement to jump to the fail_remove block, ensuring that the previously acquired resources are correctly released, thus preventing the reference count leak. This bug was identified by an experimental static analysis tool developed by our team. The tool specializes in analyzing reference count operations and detecting potential issues where resources are not properly managed. In this case, the tool flagged the missing release operation as a potential problem, which led to the development of this patch.

In the Linux kernel, the following vulnerability has been resolved: mptcp: error out earlier on disconnect Eric reported a division by zero splat in the MPTCP protocol: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted 6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163 Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8 0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 <f7> 7c 24 14 41 29 d6 45 89 f4 e9 ec fe ff ff e8 e8 73 09 f8 48 89 RSP: 0018:ffffc900041f7930 EFLAGS: 00010293 RAX: 0000000000017e67 RBX: 0000000000017e67 RCX: ffffffff8983314b RDX: 0000000000000000 RSI: ffffffff898331b0 RDI: 0000000000000004 RBP: 00000000005d6000 R08: 0000000000000004 R09: 0000000000017e67 R10: 0000000000003e80 R11: 0000000000000000 R12: 0000000000003e80 R13: ffff888031d9b440 R14: 0000000000017e67 R15: 00000000002eb000 FS: 00007feb5d7f16c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb5d8adbb8 CR3: 0000000074e4c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __tcp_cleanup_rbuf+0x3e7/0x4b0 net/ipv4/tcp.c:1493 mptcp_rcv_space_adjust net/mptcp/protocol.c:2085 [inline] mptcp_recvmsg+0x2156/0x2600 net/mptcp/protocol.c:2289 inet_recvmsg+0x469/0x6a0 net/ipv4/af_inet.c:885 sock_recvmsg_nosec net/socket.c:1051 [inline] sock_recvmsg+0x1b2/0x250 net/socket.c:1073 __sys_recvfrom+0x1a5/0x2e0 net/socket.c:2265 __do_sys_recvfrom net/socket.c:2283 [inline] __se_sys_recvfrom net/socket.c:2279 [inline] __x64_sys_recvfrom+0xe0/0x1c0 net/socket.c:2279 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7feb5d857559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007feb5d7f1208 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007feb5d8e1318 RCX: 00007feb5d857559 RDX: 000000800000000e RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007feb5d8e1310 R08: 0000000000000000 R09: ffffffff81000000 R10: 0000000000000100 R11: 0000000000000246 R12: 00007feb5d8e131c R13: 00007feb5d8ae074 R14: 000000800000000e R15: 00000000fffffdef and provided a nice reproducer. The root cause is the current bad handling of racing disconnect. After the blamed commit below, sk_wait_data() can return (with error) with the underlying socket disconnected and a zero rcv_mss. Catch the error and return without performing any additional operations on the current socket.

In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: avoid possible crash when edev->pdev changes If a PCI device is removed during eeh_pe_report_edev(), edev->pdev will change and can cause a crash, hold the PCI rescan/remove lock while taking a copy of edev->pdev->bus.

In the Linux kernel, the following vulnerability has been resolved: PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert() Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF deinit notify function pci_epc_deinit_notify() are called during the execution of pex_ep_event_pex_rst_assert() i.e., when the host has asserted PERST#. But quickly after this step, refclk will also be disabled by the host. All of the tegra194 endpoint SoCs supported as of now depend on the refclk from the host for keeping the controller operational. Due to this limitation, any access to the hardware registers in the absence of refclk will result in a whole endpoint crash. Unfortunately, most of the controller cleanups require accessing the hardware registers (like eDMA cleanup performed in dw_pcie_ep_cleanup(), etc...). So these cleanup functions can cause the crash in the endpoint SoC once host asserts PERST#. One way to address this issue is by generating the refclk in the endpoint itself and not depending on the host. But that is not always possible as some of the endpoint designs do require the endpoint to consume refclk from the host. Thus, fix this crash by moving the controller cleanups to the start of the pex_ep_event_pex_rst_deassert() function. This function is called whenever the host has deasserted PERST# and it is guaranteed that the refclk would be active at this point. So at the start of this function (after enabling resources) the controller cleanup can be performed. Once finished, rest of the code execution for PERST# deassert can continue as usual.

In the Linux kernel, the following vulnerability has been resolved: Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K" The commit 8396c793ffdf ("mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K") increased the max_req_size, even for 4K pages, causing various issues: - Panic booting the kernel/rootfs from an SD card on Rockchip RK3566 - Panic booting the kernel/rootfs from an SD card on StarFive JH7100 - "swiotlb buffer is full" and data corruption on StarFive JH7110 At this stage no fix have been found, so it's probably better to just revert the change. This reverts commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890.

In the Linux kernel, the following vulnerability has been resolved: svcrdma: Address an integer overflow Dan Carpenter reports: > Commit 78147ca8b4a9 ("svcrdma: Add a "parsed chunk list" data > structure") from Jun 22, 2020 (linux-next), leads to the following > Smatch static checker warning: > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c:498 xdr_check_write_chunk() > warn: potential user controlled sizeof overflow 'segcount * 4 * 4' > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c > 488 static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt) > 489 { > 490 u32 segcount; > 491 __be32 *p; > 492 > 493 if (xdr_stream_decode_u32(&rctxt->rc_stream, &segcount)) > ^^^^^^^^ > > 494 return false; > 495 > 496 /* A bogus segcount causes this buffer overflow check to fail. */ > 497 p = xdr_inline_decode(&rctxt->rc_stream, > --> 498 segcount * rpcrdma_segment_maxsz * sizeof(*p)); > > > segcount is an untrusted u32. On 32bit systems anything >= SIZE_MAX / 16 will > have an integer overflow and some those values will be accepted by > xdr_inline_decode().

In the Linux kernel, the following vulnerability has been resolved: clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs Base clocks are the first in being probed and are real dependencies of the rest of fixed, factor and peripheral clocks. For old ralink SoCs RT2880, RT305x and RT3883 'xtal' must be defined first since in any other case, when fixed clocks are probed they are delayed until 'xtal' is probed so the following warning appears: WARNING: CPU: 0 PID: 0 at drivers/clk/ralink/clk-mtmips.c:499 rt3883_bus_recalc_rate+0x98/0x138 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.43 #0 Stack : 805e58d0 00000000 00000004 8004f950 00000000 00000004 00000000 00000000 80669c54 80830000 80700000 805ae570 80670068 00000001 80669bf8 00000000 00000000 00000000 805ae570 80669b38 00000020 804db7dc 00000000 00000000 203a6d6d 80669b78 80669e48 70617773 00000000 805ae570 00000000 00000009 00000000 00000001 00000004 00000001 00000000 00000000 83fe43b0 00000000 ... Call Trace: [<800065d0>] show_stack+0x64/0xf4 [<804bca14>] dump_stack_lvl+0x38/0x60 [<800218ac>] __warn+0x94/0xe4 [<8002195c>] warn_slowpath_fmt+0x60/0x94 [<80259ff8>] rt3883_bus_recalc_rate+0x98/0x138 [<80254530>] __clk_register+0x568/0x688 [<80254838>] of_clk_hw_register+0x18/0x2c [<8070b910>] rt2880_clk_of_clk_init_driver+0x18c/0x594 [<8070b628>] of_clk_init+0x1c0/0x23c [<806fc448>] plat_time_init+0x58/0x18c [<806fdaf0>] time_init+0x10/0x6c [<806f9bc4>] start_kernel+0x458/0x67c ---[ end trace 0000000000000000 ]--- When this driver was mainlined we could not find any active users of old ralink SoCs so we cannot perform any real tests for them. Now, one user of a Belkin f9k1109 version 1 device which uses RT3883 SoC appeared and reported some issues in openWRT: - https://github.com/openwrt/openwrt/issues/16054 Thus, define a 'rt2880_xtal_recalc_rate()' just returning the expected frequency 40Mhz and use it along the old ralink SoCs to have a correct boot trace with no warnings and a working clock plan from the beggining.

In the Linux kernel, the following vulnerability has been resolved: virtio_pci: Fix admin vq cleanup by using correct info pointer vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq resources by virtio_pci_vq_info pointer. The info pointer of admin vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[]. Using the info pointer from vp_dev->vqs[] for admin vq causes a kernel NULL pointer dereference bug. In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer from vp_dev->admin_vq.info for admin vq to clean up the resources. Also make info ptr as argument of vp_del_vq() to be symmetric with vp_setup_vq(). vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace: ================================================================== BUG: kernel NULL pointer dereference, address:0000000000000000 ... CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1 RIP: 0010:vp_reset+0x57/0x90 [virtio_pci] Call Trace: <TASK> ... ? vp_reset+0x57/0x90 [virtio_pci] ? vp_reset+0x38/0x90 [virtio_pci] virtio_reset_device+0x1d/0x30 remove_vq_common+0x1c/0x1a0 [virtio_net] virtnet_remove+0xa1/0xc0 [virtio_net] virtio_dev_remove+0x46/0xa0 ... virtio_pci_driver_exit+0x14/0x810 [virtio_pci] ==================================================================

In the Linux kernel, the following vulnerability has been resolved: net: sock: fix hardened usercopy panic in sock_recv_errqueue skbuff_fclone_cache was created without defining a usercopy region, [1] unlike skbuff_head_cache which properly whitelists the cb[] field. [2] This causes a usercopy BUG() when CONFIG_HARDENED_USERCOPY is enabled and the kernel attempts to copy sk_buff.cb data to userspace via sock_recv_errqueue() -> put_cmsg(). The crash occurs when: 1. TCP allocates an skb using alloc_skb_fclone() (from skbuff_fclone_cache) [1] 2. The skb is cloned via skb_clone() using the pre-allocated fclone [3] 3. The cloned skb is queued to sk_error_queue for timestamp reporting 4. Userspace reads the error queue via recvmsg(MSG_ERRQUEUE) 5. sock_recv_errqueue() calls put_cmsg() to copy serr->ee from skb->cb [4] 6. __check_heap_object() fails because skbuff_fclone_cache has no usercopy whitelist [5] When cloned skbs allocated from skbuff_fclone_cache are used in the socket error queue, accessing the sock_exterr_skb structure in skb->cb via put_cmsg() triggers a usercopy hardening violation: [ 5.379589] usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_fclone_cache' (offset 296, size 16)! [ 5.382796] kernel BUG at mm/usercopy.c:102! [ 5.383923] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI [ 5.384903] CPU: 1 UID: 0 PID: 138 Comm: poc_put_cmsg Not tainted 6.12.57 #7 [ 5.384903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 5.384903] RIP: 0010:usercopy_abort+0x6c/0x80 [ 5.384903] Code: 1a 86 51 48 c7 c2 40 15 1a 86 41 52 48 c7 c7 c0 15 1a 86 48 0f 45 d6 48 c7 c6 80 15 1a 86 48 89 c1 49 0f 45 f3 e8 84 27 88 ff <0f> 0b 490 [ 5.384903] RSP: 0018:ffffc900006f77a8 EFLAGS: 00010246 [ 5.384903] RAX: 000000000000006f RBX: ffff88800f0ad2a8 RCX: 1ffffffff0f72e74 [ 5.384903] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff87b973a0 [ 5.384903] RBP: 0000000000000010 R08: 0000000000000000 R09: fffffbfff0f72e74 [ 5.384903] R10: 0000000000000003 R11: 79706f6372657375 R12: 0000000000000001 [ 5.384903] R13: ffff88800f0ad2b8 R14: ffffea00003c2b40 R15: ffffea00003c2b00 [ 5.384903] FS: 0000000011bc4380(0000) GS:ffff8880bf100000(0000) knlGS:0000000000000000 [ 5.384903] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.384903] CR2: 000056aa3b8e5fe4 CR3: 000000000ea26004 CR4: 0000000000770ef0 [ 5.384903] PKRU: 55555554 [ 5.384903] Call Trace: [ 5.384903] <TASK> [ 5.384903] __check_heap_object+0x9a/0xd0 [ 5.384903] __check_object_size+0x46c/0x690 [ 5.384903] put_cmsg+0x129/0x5e0 [ 5.384903] sock_recv_errqueue+0x22f/0x380 [ 5.384903] tls_sw_recvmsg+0x7ed/0x1960 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? schedule+0x6d/0x270 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? mutex_unlock+0x81/0xd0 [ 5.384903] ? __pfx_mutex_unlock+0x10/0x10 [ 5.384903] ? __pfx_tls_sw_recvmsg+0x10/0x10 [ 5.384903] ? _raw_spin_lock_irqsave+0x8f/0xf0 [ 5.384903] ? _raw_read_unlock_irqrestore+0x20/0x40 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 The crash offset 296 corresponds to skb2->cb within skbuff_fclones: - sizeof(struct sk_buff) = 232 - offsetof(struct sk_buff, cb) = 40 - offset of skb2.cb in fclones = 232 + 40 = 272 - crash offset 296 = 272 + 24 (inside sock_exterr_skb.ee) This patch uses a local stack variable as a bounce buffer to avoid the hardened usercopy check failure. [1] https://elixir.bootlin.com/linux/v6.12.62/source/net/ipv4/tcp.c#L885 [2] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5104 [3] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5566 [4] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5491 [5] https://elixir.bootlin.com/linux/v6.12.62/source/mm/slub.c#L5719

In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_dp: Fix integer overflow in zynqmp_dp_rate_get() This patch fixes a potential integer overflow in the zynqmp_dp_rate_get() The issue comes up when the expression drm_dp_bw_code_to_link_rate(dp->test.bw_code) * 10000 is evaluated using 32-bit Now the constant is a compatible 64-bit type. Resolves coverity issues: CID 1636340 and CID 1635811

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception() There is no support for HWPOISON, MEMORY_FAILURE, or ARCH_HAS_COPY_MC on s390. Therefore we do not expect to see VM_FAULT_HWPOISON in do_exception(). However, since commit af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more general"), it is possible to see VM_FAULT_HWPOISON in combination with PTE_MARKER_POISONED, even on architectures that do not support HWPOISON otherwise. In this case, we will end up on the BUG() in do_exception(). Fix this by treating VM_FAULT_HWPOISON the same as VM_FAULT_SIGBUS, similar to x86 when MEMORY_FAILURE is not configured. Also print unexpected fault flags, for easier debugging. Note that VM_FAULT_HWPOISON_LARGE is not expected, because s390 cannot support swap entries on other levels than PTE level.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_page_mkwrite() to check folio->mapping is valid Fix netfs_page_mkwrite() to check that folio->mapping is valid once it has taken the folio lock (as filemap_page_mkwrite() does). Without this, generic/247 occasionally oopses with something like the following: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page RIP: 0010:trace_event_raw_event_netfs_folio+0x61/0xc0 ... Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x6e/0xa0 ? exc_page_fault+0xc2/0xe0 ? asm_exc_page_fault+0x22/0x30 ? trace_event_raw_event_netfs_folio+0x61/0xc0 trace_netfs_folio+0x39/0x40 netfs_page_mkwrite+0x14c/0x1d0 do_page_mkwrite+0x50/0x90 do_pte_missing+0x184/0x200 __handle_mm_fault+0x42d/0x500 handle_mm_fault+0x121/0x1f0 do_user_addr_fault+0x23e/0x3c0 exc_page_fault+0xc2/0xe0 asm_exc_page_fault+0x22/0x30 This is due to the invalidate_inode_pages2_range() issued at the end of the DIO write interfering with the mmap'd writes.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Add check for srq max_sge attribute max_sge attribute is passed by the user, and is inserted and used unchecked, so verify that the value doesn't exceed maximum allowed value before using it.

In the Linux kernel, the following vulnerability has been resolved: drm/exynos/vidi: fix memory leak in .get_modes() The duplicated EDID is never freed. Fix it.

A vulnerability was found due to missing lock for IOPOLL flaw in io_cqring_event_overflow() in io_uring.c in Linux Kernel. This flaw allows a local attacker with user privilege to trigger a Denial of Service threat.

A denial of service vulnerability was found in n_tty_receive_char_special in drivers/tty/n_tty.c of the Linux kernel. In this flaw a local attacker with a normal user privilege could delay the loop (due to a changing ldata->read_head, and a missing sanity check) and cause a threat to the system availability.

An issue was discovered in the Linux kernel through 5.11.10. drivers/net/ethernet/freescale/gianfar.c in the Freescale Gianfar Ethernet driver allows attackers to cause a system crash because a negative fragment size is calculated in situations involving an rx queue overrun when jumbo packets are used and NAPI is enabled, aka CID-d8861bab48b6.

An issue was discovered in fs/fuse/fuse_i.h in the Linux kernel before 5.11.8. A "stall on CPU" can occur because a retry loop continually finds the same bad inode, aka CID-775c5033a0d1.

In the Linux kernel, the following vulnerability has been resolved: power: supply: rt5033: Bring back i2c_set_clientdata Commit 3a93da231c12 ("power: supply: rt5033: Use devm_power_supply_register() helper") reworked the driver to use devm. While at it, the i2c_set_clientdata was dropped along with the remove callback. Unfortunately other parts of the driver also rely on i2c clientdata so this causes kernel oops. Bring the call back to fix the driver.

An issue was discovered in the Linux kernel before 5.11.11. The netfilter subsystem allows attackers to cause a denial of service (panic) because net/netfilter/x_tables.c and include/linux/netfilter/x_tables.h lack a full memory barrier upon the assignment of a new table value, aka CID-175e476b8cdf.

In the Linux kernel, the following vulnerability has been resolved: binfmt_flat: Fix corruption when not offsetting data start Commit 04d82a6d0881 ("binfmt_flat: allow not offsetting data start") introduced a RISC-V specific variant of the FLAT format which does not allocate any space for the (obsolete) array of shared library pointers. However, it did not disable the code which initializes the array, resulting in the corruption of sizeof(long) bytes before the DATA segment, generally the end of the TEXT segment. Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of the shared library pointer region so that it will only be initialized if space is reserved for it.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference for DTN log in DCN401 When users run the command: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log The following NULL pointer dereference happens: [ +0.000003] BUG: kernel NULL pointer dereference, address: NULL [ +0.000005] #PF: supervisor instruction fetch in kernel mode [ +0.000002] #PF: error_code(0x0010) - not-present page [ +0.000002] PGD 0 P4D 0 [ +0.000004] Oops: 0010 [#1] PREEMPT SMP NOPTI [ +0.000003] RIP: 0010:0x0 [ +0.000008] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [...] [ +0.000002] PKRU: 55555554 [ +0.000002] Call Trace: [ +0.000002] <TASK> [ +0.000003] ? show_regs+0x65/0x70 [ +0.000006] ? __die+0x24/0x70 [ +0.000004] ? page_fault_oops+0x160/0x470 [ +0.000006] ? do_user_addr_fault+0x2b5/0x690 [ +0.000003] ? prb_read_valid+0x1c/0x30 [ +0.000005] ? exc_page_fault+0x8c/0x1a0 [ +0.000005] ? asm_exc_page_fault+0x27/0x30 [ +0.000012] dcn10_log_color_state+0xf9/0x510 [amdgpu] [ +0.000306] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? vsnprintf+0x2fb/0x600 [ +0.000009] dcn10_log_hw_state+0xfd0/0xfe0 [amdgpu] [ +0.000218] ? __mod_memcg_lruvec_state+0xe8/0x170 [ +0.000008] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? debug_smp_processor_id+0x17/0x20 [ +0.000003] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? set_ptes.isra.0+0x2b/0x90 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? _raw_spin_unlock+0x19/0x40 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? do_anonymous_page+0x337/0x700 [ +0.000004] dtn_log_read+0x82/0x120 [amdgpu] [ +0.000207] full_proxy_read+0x66/0x90 [ +0.000007] vfs_read+0xb0/0x340 [ +0.000005] ? __count_memcg_events+0x79/0xe0 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? count_memcg_events.constprop.0+0x1e/0x40 [ +0.000003] ? handle_mm_fault+0xb2/0x370 [ +0.000003] ksys_read+0x6b/0xf0 [ +0.000004] __x64_sys_read+0x19/0x20 [ +0.000003] do_syscall_64+0x60/0x130 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ +0.000003] RIP: 0033:0x7fdf32f147e2 [...] This error happens when the color log tries to read the gamut remap information from DCN401 which is not initialized in the dcn401_dpp_funcs which leads to a null pointer dereference. This commit addresses this issue by adding a proper guard to access the gamut_remap callback in case the specific ASIC did not implement this function.

In the Linux kernel, the following vulnerability has been resolved: r6040: Fix kmemleak in probe and remove There is a memory leaks reported by kmemleak: unreferenced object 0xffff888116111000 (size 2048): comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s) hex dump (first 32 bytes): 00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................ 08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60 [<ffffffff827e20ee>] phy_device_create+0x4e/0x90 [<ffffffff827e6072>] get_phy_device+0xd2/0x220 [<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0 [<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0 [<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040] ... The problem occurs in probe process as follows: r6040_init_one: mdiobus_register mdiobus_scan <- alloc and register phy_device, the reference count of phy_device is 3 r6040_mii_probe phy_connect <- connect to the first phy_device, so the reference count of the first phy_device is 4, others are 3 register_netdev <- fault inject succeeded, goto error handling path // error handling path err_out_mdio_unregister: mdiobus_unregister(lp->mii_bus); err_out_mdio: mdiobus_free(lp->mii_bus); <- the reference count of the first phy_device is 1, it is not released and other phy_devices are released // similarly, the remove process also has the same problem The root cause is traced to the phy_device is not disconnected when removes one r6040 device in r6040_remove_one() or on error handling path after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet device is connected to the first PHY device of mii_bus, in order to notify the connected driver when the link status changes, which is the default behavior of the PHY infrastructure to handle everything. Therefore the phy_device should be disconnected when removes one r6040 device or on error handling path. Fix it by adding phy_disconnect() when removes one r6040 device or on error handling path after r6040_mii probed successfully.

A use-after-free flaw was found in io_uring/filetable.c in io_install_fixed_file in the io_uring subcomponent in the Linux Kernel during call cleanup. This flaw may lead to a denial of service.

In the Linux kernel before 5.17, drivers/phy/tegra/xusb.c mishandles the tegra_xusb_find_port_node return value. Callers expect NULL in the error case, but an error pointer is used.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger() bdev->bd_super has been removed and commit 8887b94d9322 change the usage from bdev->bd_super to b_assoc_map->host->i_sb. Since ocfs2 hasn't set bh->b_assoc_map, it will trigger NULL pointer dereference when calling into ocfs2_abort_trigger(). Actually this was pointed out in history, see commit 74e364ad1b13. But I've made a mistake when reviewing commit 8887b94d9322 and then re-introduce this regression. Since we cannot revive bdev in buffer head, so fix this issue by initializing all types of ocfs2 triggers when fill super, and then get the specific ocfs2 trigger from ocfs2_caching_info when access journal. [joseph.qi@linux.alibaba.com: v2]

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: handle 2x996 RU allocation in cfg80211_calculate_bitrate_he() Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in cfg80211_calculate_bitrate_he(), leading to below warning: kernel: invalid HE MCS: bw:6, ru:6 kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211] Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth.

In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix deadlock during RTC update There is a deadlock when runtime suspend waits for the flush of RTC work, and the RTC work calls ufshcd_rpm_get_sync() to wait for runtime resume. Here is deadlock backtrace: kworker/0:1 D 4892.876354 10 10971 4859 0x4208060 0x8 10 0 120 670730152367 ptr f0ffff80c2e40000 0 1 0x00000001 0x000000ff 0x000000ff 0x000000ff <ffffffee5e71ddb0> __switch_to+0x1a8/0x2d4 <ffffffee5e71e604> __schedule+0x684/0xa98 <ffffffee5e71ea60> schedule+0x48/0xc8 <ffffffee5e725f78> schedule_timeout+0x48/0x170 <ffffffee5e71fb74> do_wait_for_common+0x108/0x1b0 <ffffffee5e71efe0> wait_for_completion+0x44/0x60 <ffffffee5d6de968> __flush_work+0x39c/0x424 <ffffffee5d6decc0> __cancel_work_sync+0xd8/0x208 <ffffffee5d6dee2c> cancel_delayed_work_sync+0x14/0x28 <ffffffee5e2551b8> __ufshcd_wl_suspend+0x19c/0x480 <ffffffee5e255fb8> ufshcd_wl_runtime_suspend+0x3c/0x1d4 <ffffffee5dffd80c> scsi_runtime_suspend+0x78/0xc8 <ffffffee5df93580> __rpm_callback+0x94/0x3e0 <ffffffee5df90b0c> rpm_suspend+0x2d4/0x65c <ffffffee5df91448> __pm_runtime_suspend+0x80/0x114 <ffffffee5dffd95c> scsi_runtime_idle+0x38/0x6c <ffffffee5df912f4> rpm_idle+0x264/0x338 <ffffffee5df90f14> __pm_runtime_idle+0x80/0x110 <ffffffee5e24ce44> ufshcd_rtc_work+0x128/0x1e4 <ffffffee5d6e3a40> process_one_work+0x26c/0x650 <ffffffee5d6e65c8> worker_thread+0x260/0x3d8 <ffffffee5d6edec8> kthread+0x110/0x134 <ffffffee5d616b18> ret_from_fork+0x10/0x20 Skip updating RTC if RPM state is not RPM_ACTIVE.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add() In mpt3sas_transport_port_add(), if sas_rphy_add() returns error, sas_rphy_free() needs be called to free the resource allocated in sas_end_device_alloc(). Otherwise a kernel crash will happen: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_rphy_remove+0x50/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_rphy_remove+0x38/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] scsih_remove+0xd8/0x420 [mpt3sas] Because transport_add_device() is not called when sas_rphy_add() fails, the device is not added. When sas_rphy_remove() is subsequently called to remove the device in the remove() path, a NULL pointer dereference happens.

A flaw was found in the way memory resources were freed in the unix_stream_recvmsg function in the Linux kernel when a signal was pending. This flaw allows an unprivileged local user to crash the system by exhausting available memory. The highest threat from this vulnerability is to system availability.

In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable to lazy-init rq_qos policies because they are optional features and add to hot path overhead once initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit() become noop's.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Clean up hash direct_functions on register failures We see the following GPF when register_ftrace_direct fails: [ ] general protection fault, probably for non-canonical address \ 0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [...] [ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70 [ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...] [ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206 [ ] RAX: 0000000000000000 RBX: ffffffff813e0df0 RCX: 000000000000003b [ ] RDX: 0200000000000000 RSI: 000000000000000c RDI: ffffffff813e0df0 [ ] RBP: ffffffffa00a3000 R08: ffffffff81180ce0 R09: 0000000000000001 [ ] R10: ffffc9000138bc18 R11: 0000000000000001 R12: ffffffff813e0df0 [ ] R13: ffffffff813e0df0 R14: ffff888171b56400 R15: 0000000000000000 [ ] FS: 00007fa9420c7780(0000) GS:ffff888ff6a00000(0000) knlGS:000000000 [ ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ ] CR2: 000000000770d000 CR3: 0000000107d50003 CR4: 0000000000370ee0 [ ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ ] Call Trace: [ ] <TASK> [ ] register_ftrace_direct+0x54/0x290 [ ] ? render_sigset_t+0xa0/0xa0 [ ] bpf_trampoline_update+0x3f5/0x4a0 [ ] ? 0xffffffffa00a3000 [ ] bpf_trampoline_link_prog+0xa9/0x140 [ ] bpf_tracing_prog_attach+0x1dc/0x450 [ ] bpf_raw_tracepoint_open+0x9a/0x1e0 [ ] ? find_held_lock+0x2d/0x90 [ ] ? lock_release+0x150/0x430 [ ] __sys_bpf+0xbd6/0x2700 [ ] ? lock_is_held_type+0xd8/0x130 [ ] __x64_sys_bpf+0x1c/0x20 [ ] do_syscall_64+0x3a/0x80 [ ] entry_SYSCALL_64_after_hwframe+0x44/0xae [ ] RIP: 0033:0x7fa9421defa9 [ ] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 9 f8 [...] [ ] RSP: 002b:00007ffed743bd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 [ ] RAX: ffffffffffffffda RBX: 00000000069d2480 RCX: 00007fa9421defa9 [ ] RDX: 0000000000000078 RSI: 00007ffed743bd80 RDI: 0000000000000011 [ ] RBP: 00007ffed743be00 R08: 0000000000bb7270 R09: 0000000000000000 [ ] R10: 00000000069da210 R11: 0000000000000246 R12: 0000000000000001 [ ] R13: 00007ffed743c4b0 R14: 00000000069d2480 R15: 0000000000000001 [ ] </TASK> [ ] Modules linked in: klp_vm(OK) [ ] ---[ end trace 0000000000000000 ]--- One way to trigger this is: 1. load a livepatch that patches kernel function xxx; 2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now); 3. repeat #2 => gpf. This is because the entry is added to direct_functions, but not removed. Fix this by remove the entry from direct_functions when register_ftrace_direct fails. Also remove the last trailing space from ftrace.c, so we don't have to worry about it anymore.

In the Linux kernel, the following vulnerability has been resolved: netlink: Bounds-check struct nlmsgerr creation In preparation for FORTIFY_SOURCE doing bounds-check on memcpy(), switch from __nlmsg_put to nlmsg_put(), and explain the bounds check for dealing with the memcpy() across a composite flexible array struct. Avoids this future run-time warning: memcpy: detected field-spanning write (size 32) of single field "&errmsg->msg" at net/netlink/af_netlink.c:2447 (size 16)

In the Linux kernel, the following vulnerability has been resolved: media: i2c: dw9714: Disable the regulator when the driver fails to probe When the driver fails to probe, we will get the following splat: [ 59.305988] ------------[ cut here ]------------ [ 59.306417] WARNING: CPU: 2 PID: 395 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 59.310345] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 59.318362] Call Trace: [ 59.318582] <TASK> [ 59.318765] regulator_put+0x1f/0x30 [ 59.319058] devres_release_group+0x319/0x3d0 [ 59.319420] i2c_device_probe+0x766/0x940 Fix this by disabling the regulator in error handling.

In the Linux kernel, the following vulnerability has been resolved: mm/mprotect: only reference swap pfn page if type match Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]: kernel BUG at include/linux/swapops.h:117! CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S O L 6.0.0-dbg-DEV #2 RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0 Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6 c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b 48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48 RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282 RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000 RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000 R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738 R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a FS: 00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> change_pte_range+0x36e/0x880 change_p4d_range+0x2e8/0x670 change_protection_range+0x14e/0x2c0 mprotect_fixup+0x1ee/0x330 do_mprotect_pkey+0x34c/0x440 __x64_sys_mprotect+0x1d/0x30 It triggers because pfn_swap_entry_to_page() could be called upon e.g. a genuine swap entry. Fix it by only calling it when it's a write migration entry where the page* is used. [1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/