Jeecg-boot v3.4.3 was discovered to contain a SQL injection vulnerability via the component /sys/duplicate/check.

Jeecg-boot v3.4.3 was discovered to contain a SQL injection vulnerability via the component updateNullByEmptyString.

A vulnerability was found in jeecg-boot. It has been declared as critical. This vulnerability affects unknown code of the file /api/. The manipulation of the argument file leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-205594 is the identifier assigned to this vulnerability.

Jeecg-boot v3.0 was discovered to contain a SQL injection vulnerability via the code parameter in /sys/user/queryUserComponentData.

A vulnerability was determined in jeecgboot JimuReport up to 2.1.2. Affected is an unknown function of the file /drag/onlDragDataSource/testConnection of the component DB2 JDBC Handler. Executing manipulation of the argument clientRerouteServerListJNDIName can lead to deserialization. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.

In JeecgBoot 3.0, there is a SQL injection vulnerability that can operate the database with root privileges.

Deserialization of Untrusted Data in jeecgFormDemoController in JEECG 4.0 and earlier allows attackers to run arbitrary code via crafted POST request.

An arbitrary file upload vulnerability in /jeecg-boot/sys/common/upload of jeecg-boot CMS 2.3 allows attackers to execute arbitrary code.

JeecgBoot v3.7.1 was discovered to contain a SQL injection vulnerability via the component /onlDragDatasetHead/getTotalData.

A vulnerability was found in jeecgboot JimuReport up to 1.6.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component Template Handler. The manipulation leads to injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.6.1 is able to address this issue. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-237571.

An issue in the component /jeecg-boot/jmreport/dict/list of JimuReport v1.7.8 allows attacker to escalate privileges via a crafted GET request.

Jeecg boot up to v3.5.3 was discovered to contain a SQL injection vulnerability via the component /jeecg-boot/jmreport/show.

SQL injection vulnerbility in jeecgboot jeecg-boot v 3.0, 3.5.3 that allows a remote attacker to execute arbitrary code via a crafted request to the report/jeecgboot/jmreport/queryFieldBySql component.

SSTI injection vulnerability in jeecg-boot version 3.5.3, allows remote attackers to execute arbitrary code via crafted HTTP request to the /jmreport/loadTableData component.

SQL injection vulnerability in jeecg-boot v3.5.3, allows remote attackers to escalate privileges and obtain sensitive information via the component /sys/replicate/check.

SQL injection vulnerability in jeecg-boot version 3.5.3, allows remote attackers to escalate privileges and obtain sensitive information via the jmreport/qurestSql component.

A vulnerability was determined in jeecgboot JimuReport up to 2.1.1. Affected by this issue is some unknown functionality of the file /drag/onlDragDataSource/testConnection of the component Data Large Screen Template. The manipulation leads to deserialization. The attack may be launched remotely. The vendor response to the GitHub issue report is: "Modified, next version updated".

jeecg-boot 3.5.0 and 3.5.1 have a SQL injection vulnerability the id parameter of the /jeecg-boot/jmreport/show interface.

Jeecg-boot v3.0 was discovered to contain a SQL injection vulnerability via the code parameter in /jeecg-boot/sys/user/queryUserByDepId.

JimuReport thru version 2.1.3 is vulnerable to remote code execution when processing user-controlled H2 JDBC URLs. The application passes the attacker-supplied JDBC URL directly to the H2 driver, allowing the use of certain directives to execute arbitrary Java code. A different vulnerability than CVE-2025-10770.

A vulnerability was found in jeecg-boot 3.5.0. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file SysDictMapper.java of the component Sleep Command Handler. The manipulation leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-224629 was assigned to this vulnerability.

A vulnerability was found in jeecg-boot 3.5.0 and classified as critical. This issue affects some unknown processing of the component API Documentation. The manipulation leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-224699.

A vulnerability classified as critical has been found in jeecg-boot 3.5.0. This affects an unknown part of the file jmreport/qurestSql. The manipulation of the argument apiSelectId leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-223299.

Jeecg-boot v3.4.4 was discovered to contain a SQL injection vulnerability via the component /sys/dict/queryTableData.

A vulnerability classified as critical was found in jeecgboot JimuReport up to 1.6.1. Affected by this vulnerability is an unknown functionality of the file /download/image. The manipulation of the argument imageUrl leads to relative path traversal. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-246133 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

There is an injection vulnerability in jeecg boot versions 3.0.0 to 3.5.3 due to lax character filtering, which allows attackers to execute arbitrary code on components through specially crafted HTTP requests.

jeecg-boot v3.5.1 was discovered to contain a SQL injection vulnerability via the title parameter at /sys/dict/loadTreeData.

A vulnerability was determined in Tenda WH450 1.0.0.18. This impacts an unknown function of the file /goform/CheckTools of the component HTTP Request Handler. Executing a manipulation of the argument ipaddress can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A weakness has been identified in Totolink A7100RU 7.4cu.2313_b20191024. Affected is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument maxRtrAdvInterval causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A command injection vulnerability has been identified in Atos Unify OpenScape 4000 Assistant and Unify OpenScape 4000 Manager (8 before R2.22.18, 10 before 0.28.13, and 10 R1 before R1.34.4) that may allow an unauthenticated attacker to upload arbitrary files and achieve administrative access to the system.

D-Link DIR-3040 device with firmware 120B03 was discovered to contain a command injection vulnerability via the SetTriggerLEDBlink function.

A weakness has been identified in D-Link DIR-806A 100CNb11. Affected is the function ssdpcgi_main of the component SSDP Request Handler. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this issue is the function websGetVar of the file /goform/set_blacklist. The manipulation of the argument mac/enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

xterm before 375 allows code execution via font ops, e.g., because an OSC 50 response may have Ctrl-g and therefore lead to command execution within the vi line-editing mode of Zsh. NOTE: font ops are not allowed in the xterm default configurations of some Linux distributions.

A vulnerability, which was classified as critical, was found in LB-LINK AC1900 Router 1.0.2. Affected is the function websGetVar of the file /goform/set_manpwd. The manipulation of the argument routepwd  leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setWiFiBasicCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument wifiOff results in os command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used.

A flaw has been found in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument wizard causes os command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used.

A flaw has been found in Totolink A7100RU 7.4cu.2313_b20191024. The impacted element is the function setAccessDeviceCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument mac causes os command injection. The attack can be initiated remotely. The exploit has been published and may be used.

Diagnosis Controller miss parameter validation, so user may attacked by command injection via HTTP Request.

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. This affects the function setIpQosRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument Comment leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

A flaw has been found in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setWiFiAclRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument mode causes os command injection. The attack is possible to be carried out remotely. The exploit has been published and may be used.

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setIptvCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument setIptvCfg results in os command injection. The attack can be initiated remotely. The exploit has been made public and could be used.

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function CsteSystem of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument HTTP leads to os command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

D-Link DIR-823G v1.0.2 was found to contain a command injection vulnerability in the function SetNetworkTomographySettings. This vulnerability allows attackers to execute arbitrary commands via a crafted packet.

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. Affected by this vulnerability is the function setIpv6LanCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument addrPrefixLen can lead to os command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this issue is the function setNetworkCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument proto results in os command injection. The attack may be initiated remotely. The exploit is now public and may be used.

IP-COM EW9 V15.11.0.14(9732) was discovered to contain a command injection vulnerability in the formSetDebugCfg function.

A vulnerability was identified in Edimax BR-6208AC 1.02/1.03. Affected is the function formStaDrvSetup of the file /goform/formStaDrvSetup of the component Web-based Configuration Interface. The manipulation of the argument rootAPmac leads to command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. Edimax confirms this issue: "The product mentioned, EDIMAX BR-6208AC V2, has reached its End of Life (EOL) status. It is no longer supported or maintained by Edimax, and it is no longer available for purchase in the market. Consequently, there will be no further firmware updates or patches for this device. We recommend users upgrade to newer models for better security." This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setUrlFilterRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument enable results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used.

A security vulnerability has been detected in Totolink A8000RU 7.1cu.643_b20200521. This impacts the function setLoginPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument admpass leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.