A vulnerability in the web-based management interface of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to bypass authentication and get limited access to the web-based management interface. The vulnerability is due to an incorrect implementation of authentication in the web-based management interface. An attacker could exploit this vulnerability by sending a crafted authentication request to the web-based management interface on an affected system. A successful exploit could allow the attacker to view limited configuration details and potentially upload a virtual machine image.

Doorkeeper is an OAuth 2 provider for Ruby on Rails / Grape. Prior to version 5.6.6, Doorkeeper automatically processes authorization requests without user consent for public clients that have been previous approved. Public clients are inherently vulnerable to impersonation, their identity cannot be assured. This issue is fixed in version 5.6.6.

Windows 7 is vulnerable to a full blind TCP/IP hijacking attack. The vulnerability exists in Windows 7 (any Windows until Windows 8) and in any implementation of TCP/IP, which is vulnerable to the Idle scan attack (including many IoT devices). NOTE: The vendor considers this a low severity issue.

BusyBox wget thru 1.3.7 accepted raw CR (0x0D)/LF (0x0A) and other C0 control bytes in the HTTP request-target (path/query), allowing the request line to be split and attacker-controlled headers to be injected. To preserve the HTTP/1.1 request-line shape METHOD SP request-target SP HTTP/1.1, a raw space (0x20) in the request-target must also be rejected (clients should use %20).

Authentication bypass in vector-admin allows a user to register to a vector-admin server while “domain restriction” is active, even when not owning an authorized email address.

An improper access control vulnerability in Fortinet FortiOS 7.2.0 - 7.2.4 and 7.4.0 allows an attacker to access a restricted resource from a non trusted host.

A vulnerability classified as problematic has been found in Totolink T6 4.1.9cu.5241_B20210923. This affects an unknown part of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument topicurl with the input showSyslog leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249867. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in SourceCodester Student Result Management System 1.0. This affects an unknown part of the file /admin/core/new_user of the component Register Interface. The manipulation leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Vert.x STOMP is a vert.x implementation of the STOMP specification that provides a STOMP server and client. From versions 3.1.0 until 3.9.16 and 4.0.0 until 4.4.2, a Vert.x STOMP server processes client STOMP frames without checking that the client send an initial CONNECT frame replied with a successful CONNECTED frame. The client can subscribe to a destination or publish message without prior authentication. Any Vert.x STOMP server configured with an authentication handler is impacted. The issue is patched in Vert.x 3.9.16 and 4.4.2. There are no trivial workarounds.

IBM Maximo Asset Management 7.6.1.3 could allow a remote attacker to log into the admin panel due to improper access controls. IBM X-Force ID: 255073.

Versions of the package asyncua before 0.9.96 are vulnerable to Improper Authentication such that it is possible to access Address Space without encryption and authentication. **Note:** This issue is a result of missing checks for services that require an active session.

Improper authentication in Microsoft Office SharePoint allows an unauthorized attacker to perform spoofing over a network.

The Palantir Tiles1 service was found to be vulnerable to an API wide issue where the service was not performing authentication/authorization on all the endpoints.

Directus is a real-time API and App dashboard for managing SQL database content. Starting in version 9.12.0 and prior to version 11.9.0, Directus Flows with a manual trigger are not validating whether the user triggering the Flow has permissions to the items provided as payload to the Flow. Depending on what the Flow is set up to do this can lead to the Flow executing potential tasks on the attacker's behalf without authenticating. Bad actors could execute the manual trigger Flows without authentication, or access rights to the said collection(s) or item(s). Users with manual trigger Flows configured are impacted as these endpoints do not currently validate if the user has read access to `directus_flows` or to the relevant collection/items. The manual trigger Flows should have tighter security requirements as compared to webhook Flows where users are expected to perform do their own checks. Version 11.9.0 fixes the issue. As a workaround, implement permission checks for read access to Flows and read access to relevant collection/items.

Incorrect access control in CaricaVerbale in Agenzia Impresa Eccobook v2.81.1 allows authenticated attackers with low-level access to escalate privileges to Administrator.

An improper authorization vulnerability exists in Rocket.Chat <6.0 that could allow a hacker to manipulate the rid parameter and change the updateMessage method that only checks whether the user is allowed to edit message in the target room.

Vedo Suite 2024.17 is vulnerable to Incorrect Access Control, which allows remote attackers to obtain a valid high privilege JWT token without prior authentication via sending an empty HTTP POST request to the /autologin/ API endpoint.

An issue was discovered in CPUID cpuz.sys 1.0.5.4. An attacker can use DeviceIoControl with the unvalidated parameters 0x9C402440 and 0x9C402444 as IoControlCodes to perform RDMSR and WRMSR, respectively. Through this process, the attacker can modify MSR_LSTAR and hook KiSystemCall64. Afterward, using Return-Oriented Programming (ROP), the attacker can manipulate the stack with pre-prepared gadgets, disable the SMAP flag in the CR4 register, and execute a user-mode syscall handler in the kernel context. It has not been confirmed whether this works on 32-bit Windows, but it functions on 64-bit Windows if the core isolation feature is either absent or disabled.

Intelbras RX1500 Router v2.2.17 and before is vulnerable to Incorrect Access Control in the FirmwareUpload function and GetFirmwareValidation function.

Incorrect access control in Software GmbH Agorum core open v11.9.2 & v11.10.1 allows authenticated attackers to escalate privileges to Administrator and access sensitive components and information.

Incorrect access control in the dynawebservice component of agorum Software GmbH Agorum core open v11.9.2 & v11.10.1 allows unauthenticated attackers to access arbitrary files on the system.

Improper authentication in Microsoft Office SharePoint allows an unauthorized attacker to perform spoofing over a network.

A vulnerability was found in libssh, where the authentication check of the connecting client can be bypassed in the`pki_verify_data_signature` function in memory allocation problems. This issue may happen if there is insufficient memory or the memory usage is limited. The problem is caused by the return value `rc,` which is initialized to SSH_ERROR and later rewritten to save the return value of the function call `pki_key_check_hash_compatible.` The value of the variable is not changed between this point and the cryptographic verification. Therefore any error between them calls `goto error` returning SSH_OK.

This vulnerability allows unauthenticated remote attackers to bypass authentication and gain partial data access to the vulnerable Trellix IPS Manager with garbage data in response mostly

Netwrix Directory Manager (formerly Imanami GroupID) v.11.0.0.0 and before, as well as after v.11.1.25134.03 lacks Authentication for a Critical Function.

A vulnerability classified as critical has been found in Software AG WebMethods 10.11.x/10.15.x. Affected is an unknown function of the file wm.server/connect/. The manipulation leads to improper access controls. It is possible to launch the attack remotely. To access a file like /assets/ a popup may request username and password. By just clicking CANCEL you will be redirected to the directory. If you visited /invoke/wm.server/connect, you'll be able to see details like internal IPs, ports, and versions. In some cases if access to /assets/ is refused, you may enter /assets/x as a wrong value, then come back to /assets/ which we will show the requested data. It appears that insufficient access control is depending on referrer header data. VDB-247158 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Improper access controls in the web management portal of the Tenda RX2 Pro 16.03.30.14 allows an unauthenticated remote attacker to enable telnet access to the router's OS by sending a /goform/telnet web request.

Lack of access controls in the 'ate' management binary of the Tenda RX2 Pro 16.03.30.14 allows an unauthenticated remote attacker to perform unauthorized configuration changes for any router where 'ate' has been enabled by sending a crafted UDP packet

Improper access controls in the web management portal of the Tenda RX2 Pro 16.03.30.14 allows an unauthenticated remote attacker to enable 'ate' (a remote system management binary) by sending a /goform/ate web request.

Bypass vulnerability in the network search instruction authentication module Impact: Successful exploitation of this vulnerability can bypass authentication and enable access to some network search functions.

Under certain configurations, an attacker can login to Aruba EdgeConnect Enterprise Orchestrator without supplying a multi-factor authentication code. Successful exploitation allows an attacker to login using only a username and password and successfully bypass MFA requirements in Aruba EdgeConnect Enterprise Orchestration Software version(s): Aruba EdgeConnect Enterprise Orchestrator (on-premises), Aruba EdgeConnect Enterprise Orchestrator-as-a-Service, Aruba EdgeConnect Enterprise Orchestrator-SP and Aruba EdgeConnect Enterprise Orchestrator Global Enterprise Tenant Orchestrators - Orchestrator 9.2.1.40179 and below, - Orchestrator 9.1.4.40436 and below, - Orchestrator 9.0.7.40110 and below, - Orchestrator 8.10.23.40015 and below, - Any older branches of Orchestrator not specifically mentioned.

This issue was addressed by removing the vulnerable code. This issue is fixed in macOS Sequoia 15.5. An app may be able to break out of its sandbox.

The controller responsible for setting the logging level does not include any authorization checks to ensure the user is authenticated. This can be seen by noting that it extends Controller rather than AuthenticatedController and includes no further checks. This issue affects YugabyteDB Anywhere: from 2.0.0 through 2.17.3

Incorrect access control in the component /cgi-bin/system_diagnostic_main.asp of DASAN GPON ONU H660WM H660WMR210825 allows attackers to access sensitive information.

Navidrome is an open source web-based music collection server and streamer. Starting in version 0.52.0 and prior to version 0.54.5, in certain Subsonic API endpoints, a flaw in the authentication check process allows an attacker to specify any arbitrary username that does not exist on the system, along with a salted hash of an empty password. Under these conditions, Navidrome treats the request as authenticated, granting access to various Subsonic endpoints without requiring valid credentials. An attacker can use any non-existent username to bypass the authentication system and gain access to various read-only data in Navidrome, such as user playlists. However, any attempt to modify data fails with a "permission denied" error due to insufficient permissions, limiting the impact to unauthorized viewing of information. Version 0.54.5 contains a patch for this issue.

Escalade GLPI plugin is a ticket escalation process helper for GLPI. Prior to version 2.9.11, there is an improper access control vulnerability. This can lead to data exposure and workflow disruptions. This issue has been patched in version 2.9.11.

An issue in the /usr/local/bin/jncs.sh script of Gefen WebFWC (In AV over IP products) v1.85h, v1.86v, and v1.70 allows attackers with network access to connect to the device over TCP port 4444 without authentication and execute arbitrary commands with root privileges.

An issue was discovered in the fp_masterquiz (aka Master-Quiz) extension before 2.2.1, and 3.x before 3.5.1, for TYPO3. An attacker can continue the quiz of a different user. In doing so, the attacker can view that user's answers and modify those answers.

The PixelYourSite – Your smart PIXEL (TAG) & API Manager and the PixelYourSite PRO plugins for WordPress are vulnerable to Sensitive Information Exposure in all versions up to, and including, 9.7.1 and 10.4.2, respectively, through publicly exposed log files. This makes it possible for unauthenticated attackers to view potentially sensitive information contained in the exposed log files, and to delete log files.

Incorrect access control in M2Soft CROWNIX Report & ERS affected v7.x to v7.4.3.599 and v8.x to v8.0.3.79 allows unauthorized attackers to obtain Administrator account access.

There is an insufficient authentication vulnerability in some Huawei band products. Successful exploit could allow the attacker to spoof then connect to the band.

OpenOrange Business Framework version 1.15.5 installs to a directory with overly permissive access control, allowing all authenticated users to write to the installation path. In combination with the application's behavior of loading DLLs from this location, this allows for DLL hijacking and may result in arbitrary code execution and privilege escalation.

The authfile directive in the booth config file is ignored, preventing use of authentication in communications from node to node. As a result, nodes that do not have the correct authentication key are not prevented from communicating with other nodes in the cluster.

The logic in place to facilitate the update process via the user interface lacks access control to verify if permission exists to perform the tasks. Prior to this patch being applied it might be possible for an attacker to access the Mautic version number or to execute parts of the upgrade process without permission. As upgrading in the user interface is deprecated, this functionality is no longer required.

Alpine is a scaffolding library in Java. Alpine prior to version 1.10.4 allows Authentication Filter bypass. The AuthenticationFilter relies on the request URI to evaluate if the user is accessing the swagger endpoint. By accessing a URL with a path such as /api/foo;%2fapi%2fswagger the contains condition will hold and will return from the authentication filter without aborting the request. Note that the principal object will not be assigned and therefore the issue wont allow user impersonation. This issue has been fixed in version 1.10.4. There are no known workarounds.

An Improper Authentication vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause an impact on confidentiality or integrity. A vulnerability in the processing of TCP-AO will allow a BGP or LDP peer not configured with authentication to establish a session even if the peer is locally configured to use authentication. This could lead to untrusted or unauthorized sessions being established. This issue affects Juniper Networks Junos OS: 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R2-S2, 21.3R3; 21.4 versions prior to 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R1-S1, 22.1R2. This issue does not affect Juniper Networks Junos OS Evolved.

Improper Access Control in GitHub repository publify/publify prior to 9.2.8.

A vulnerability in the Traversal Using Relays around NAT (TURN) server component of Cisco Expressway software could allow an unauthenticated, remote attacker to bypass security controls and send network traffic to restricted destinations. The vulnerability is due to improper validation of specific connection information by the TURN server within the affected software. An attacker could exploit this issue by sending specially crafted network traffic to the affected software. A successful exploit could allow the attacker to send traffic through the affected software to destinations beyond the application, possibly allowing the attacker to gain unauthorized network access.