An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell metacharacters in the Gateway field.

An arbitrary file access vulnerability exists in Magento 2.2 prior to 2.2.10, Magento 2.3 prior to 2.3.3 or 2.3.2-p1. An authenticated user can leverage file upload controller for downloadable products to read/delete an arbitary files.

Prima Systems FlexAir, Versions 2.3.38 and prior. Improper validation of file extensions when uploading files could allow a remote authenticated attacker to upload and execute malicious applications within the application’s web root with root privileges.

Atos Unify OpenScape Common Management Portal V10 before V10 R4.17.0 and V10 R5.1.0 allows an authenticated attacker to execute arbitrary code on the operating system by leveraging the Common Management Portal web interface for Authenticated remote upload and creation of arbitrary files affecting the underlying operating system. This is also known as OCMP-6591.

Sourcecodester Vehicle Service Management System 1.0 is vulnerable to File upload. An attacker can upload a malicious php file in multiple endpoints it leading to Code Execution.

An issue was discovered in Observium Professional, Enterprise & Community 20.8.10631. It is vulnerable to directory traversal and local file inclusion due to the fact that there is an unrestricted possibility of loading any file with an inc.php extension. Inclusion of other files (even though limited to the mentioned extension) can lead to Remote Code Execution. This can occur via /device/device=345/?tab=routing&proto=../ URIs to device/routing.inc.php.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field.

SPIP 4.0.0 is affected by a remote command execution vulnerability. To exploit the vulnerability, an attacker must craft a malicious picture with a double extension, upload it and then click on it to execute it.

Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote authenticated attackers to execute arbitrary OS commands via the Management Page.

A Remote Code Execution (RCE) vulnerabilty exists in LimeSurvey 5.2.4 via the upload and install plugins function, which could let a remote malicious user upload an arbitrary PHP code file. NOTE: the Supplier's position is that plugins intentionally can contain arbitrary PHP code, and can only be installed by a superadmin, and therefore the security model is not violated by this finding.

dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077.

An issue in YeaLinkSIP-T19P-E2 v.53.84.0.15 allows a remote privileged attacker to execute arbitrary code via a crafted request the ping function of the diagnostic component.

Improper neutralization of special elements in the SonicWall SSL-VPN SMA100 series management interface allows a remote authenticated attacker to inject OS Commands which potentially leads to remote command execution vulnerability or denial of service (DoS) attack.

The PWA for WP & AMP for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the pwaforwp_splashscreen_uploader function in versions up to, and including, 1.7.32. This makes it possible for authenticated attackers to upload arbitrary files on the affected sites server which may make remote code execution possible.

Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in mail sending and receiving component in Synology Mail Station before 20211105-10315 allows remote authenticated users to execute arbitrary commands via unspecified vectors.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 6.4.1 and 6.4.0, version 6.3.15 and below, version 6.2.6 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests.

PatrOwl is a free and open-source solution for orchestrating Security Operations. In versions prior to 1.7.7 PatrowlManager unrestrictly handle upload files in the findings import feature. This vulnerability is capable of uploading dangerous type of file to server leading to XSS attacks and potentially other forms of code injection. Users are advised to update to 1.7.7 as soon as possible. There are no known workarounds for this issue.

An unrestricted file upload vulnerability in /UploadPsIcon.jsp in SysAid ITIL 20.4.74 b10 allows a remote authenticated attacker to upload an arbitrary file via the file parameter in the HTTP POST body. A successful request returns the absolute, server-side filesystem path of the uploaded file.

CartView.php in ChurchInfo 1.3.0 allows attackers to achieve remote code execution through insecure uploads. This requires authenticated access tot he ChurchInfo application. Once authenticated, a user can add names to their cart, and compose an email. Uploading an attachment for the email stores the attachment on the site in the /tmp_attach/ folder where it can be accessed with a GET request. There are no limitations on files that can be attached, allowing for malicious PHP code to be uploaded and interpreted by the server.

A CWE-434: Unrestricted Upload of File with Dangerous Type vulnerability exists in U.motion Server (MEG6501-0001 - U.motion KNX server, MEG6501-0002 - U.motion KNX Server Plus, MEG6260-0410 - U.motion KNX Server Plus, Touch 10, MEG6260-0415 - U.motion KNX Server Plus, Touch 15), which could allow a user with low privileges to upload a rogue file.

Gerapy is a distributed crawler management framework. Gerapy prior to version 0.9.8 is vulnerable to remote code execution, and this issue is patched in version 0.9.8.

The Recently plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the fetch_external_image() function in versions up to, and including, 3.0.4. This makes it possible for authenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible.

A vulnerability, which was classified as critical, has been found in NBS&HappySoftWeChat 1.1.6. Affected by this issue is some unknown functionality. The manipulation leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-237512.

SuiteCRM before 7.11.19 allows remote code execution via the system settings Log File Name setting. In certain circumstances involving admin account takeover, logger_file_name can refer to an attacker-controlled PHP file under the web root, because only the all-lowercase PHP file extensions were blocked. NOTE: this issue exists because of an incomplete fix for CVE-2020-28328.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.2 and below, version 8.5.2 and below, version 8.4.2 and below, version 8.3.2 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests to the alarm dashboard and controller config handlers.

FiberHome ONU GPON AN5506-04-F RP2617 is affected by an OS command injection vulnerability. This vulnerability allows the attacker, once logged in, to send commands to the operating system as the root user via the ping diagnostic tool, bypassing the IP address field, and concatenating OS commands with a semicolon.

The Brizy – Page Builder plugin for WordPress is vulnerable to arbitrary file uploads due to missing file extension validation in the validateImageContent function called via storeImages in all versions up to, and including, 2.4.43. This makes it possible for authenticated attackers, with contributor access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. Version 2.4.44 prevents the upload of files ending in .sh and .php. Version 2.4.45 fully patches the issue.

Dell DM5500 contains a privilege escalation vulnerability in the appliance. A remote attacker with low privileges could potentially exploit this vulnerability to escape the restricted shell and gain root access to the appliance.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an authenticated remote command execution (RCE) vulnerability via the "mru" parameter in the "cstecgi.cgi" binary.

Unrestricted File Upload in Web Applications operating on Business-DNA Solutions GmbH’s TopEase® Platform Version <= 7.1.27 in the File Upload Functions allows an authenticated remote attacker with Upload privileges to upload files with any file type, enabling client-side attacks.

A vulnerability was found in Sapido BR270n, BRC76n, GR297 and RB1732 and classified as critical. Affected by this issue is some unknown functionality of the file ip/syscmd.htm. The manipulation leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-214592.

Remote Code Execution (RCE) vulnerability exists in Sourcecodester Budget and Expense Tracker System 1.0 that allows a remote malicious user to inject arbitrary code via the image upload field. .

The Device42 Remote Collector before 17.05.01 does not sanitize user input in its SNMP Connectivity utility. This allows an authenticated attacker (with access to the console application) to execute arbitrary OS commands and escalate privileges.

Phpgurukul Tourism Management System v2.0 is vulnerable to Unrestricted Upload of File with Dangerous Type via tms/admin/create-package.php. When creating a new package, there is no checks for what types of files are uploaded from the image.

Adtran 834-5 11.1.0.101-202106231430, and fixed as of SmartOS Version 12.6.3.1, devices allow OS Command Injection via shell metacharacters to the Ping or Traceroute utility.

kustomize-controller is a Kubernetes operator, specialized in running continuous delivery pipelines for infrastructure and workloads defined with Kubernetes manifests and assembled with Kustomize. Users that can create Kubernetes Secrets, Service Accounts and Flux Kustomization objects, could execute commands inside the kustomize-controller container by embedding a shell script in a Kubernetes Secret. This can be used to run `kubectl` commands under the Service Account of kustomize-controller, thus allowing an authenticated Kubernetes user to gain cluster admin privileges. In affected versions multitenant environments where non-admin users have permissions to create Flux Kustomization objects are affected by this issue. This vulnerability was fixed in kustomize-controller v0.15.0 (included in flux2 v0.18.0) released on 2021-10-08. Starting with v0.15, the kustomize-controller no longer executes shell commands on the container OS and the `kubectl` binary has been removed from the container image. To prevent the creation of Kubernetes Service Accounts with `secrets` in namespaces owned by tenants, a Kubernetes validation webhook such as Gatekeeper OPA or Kyverno can be used.

An issue was discovered in the firmware update form in Socomec REMOTE VIEW PRO 2.0.41.4. An authenticated attacker can bypass a client-side file-type check and upload arbitrary .php files.

A shell command injection in the HW Events SNMP community in XoruX LPAR2RRD and STOR2RRD before 7.30 allows authenticated remote attackers to execute arbitrary shell commands as the user running the service.

TP-Link wifi router TL-WR802N V4(JP), with firmware version prior to 211202, is vulnerable to OS command injection.

EVERTZ devices 3080IPX exe-guest-v1.2-r26125, 7801FC 1.3 Build 27, and 7890IXG V494 are vulnerable to Arbitrary File Upload, allowing an authenticated attacker to upload a webshell or overwrite any critical system files.

webTareas version 2.4 and earlier allows an authenticated user to arbitrarily upload potentially dangerous files without restrictions. This is working by adding or replacing a personal profile picture. The affected endpoint is /includes/upload.php on the HTTP POST data. This allows an attacker to exploit the platform by injecting code or malware and, under certain conditions, to execute code on remote user browsers.

There is a Potential Zip Slip Vulnerability and OS Command Injection Vulnerability on the management system of baserCMS. Users with permissions to upload files may upload crafted zip files which may execute arbitrary commands on the host operating system. This is a vulnerability that needs to be addressed when the management system is used by an unspecified number of users. If you are eligible, please update to the new version as soon as possible.

The affected product is vulnerable to a parameter injection via passphrase, which enables the attacker to supply uncontrolled input.

An unrestricted file upload vulnerability exists in Ivanti Avalanche before 6.3.3 allows an attacker with access to the Inforail Service to write dangerous files.

A improper neutralization of special elements used in a command ('command injection') in Fortinet FortiExtender version 7.0.1 and below, 4.2.3 and below, 4.1.7 and below allows an authenticated attacker to execute privileged shell commands via CLI commands including special characters

Multiple authenticated command injection vulnerabilities exist in the command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

The Amelia WordPress plugin before 1.0.47 stores image blobs into actual files whose extension is controlled by the user, which may lead to PHP backdoors being uploaded onto the site. This vulnerability can be exploited by logged-in users with the custom "Amelia Manager" role.

Nextcloud is an open-source, self-hosted productivity platform. Prior to versions 20.0.13, 21.0.5, and 22.2.0, a file traversal vulnerability makes an attacker able to download arbitrary SVG images from the host system, including user provided files. This could also be leveraged into a XSS/phishing attack, an attacker could upload a malicious SVG file that mimics the Nextcloud login form and send a specially crafted link to victims. The XSS risk here is mitigated due to the fact that Nextcloud employs a strict Content-Security-Policy disallowing execution of arbitrary JavaScript. It is recommended that the Nextcloud Server be upgraded to 20.0.13, 21.0.5 or 22.2.0. There are no known workarounds aside from upgrading.

A10 Thunder ADC CsrRequestView Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of A10 Thunder ADC. Authentication is required to exploit this vulnerability. The specific flaw exists within the CsrRequestView class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of a10user. Was ZDI-CAN-22517.