TOTOLINK CP300+ V5.2cu.7594_B20200910 and before is vulnerable to command injection.

TOTOLINK CP300+ V5.2cu.7594_B20200910 and before is vulnerable to command injection.

Command Injection vulnerability in goform/SetIPTVCfg interface of Tenda AC15 V15.03.05.20 allows remote attackers to run arbitrary commands via crafted POST request.

GL-iNet products AR750/AR750S/AR300M/AR300M16/MT300N-V2/B1300/MT1300/SFT1200/X750 v4.3.11, MT3000/MT2500/AXT1800/AX1800/A1300/X300B v4.5.16, XE300 v4.3.16, E750 v4.3.12, AP1300/S1300 v4.3.13, and XE3000/X3000 v4.4 were discovered to contain a vulnerability can be exploited to manipulate routers by passing malicious shell commands through the s2s API.

The Delta Electronics DVW-W02W2-E2 devices expose a web administration interface to users. This interface implements multiple features that are affected by command injections and stack overflows vulnerabilities. Successful exploitation of these flaws would allow remote unauthenticated attackers to gain remote code execution with elevated privileges on the affected devices. This issue affects DVW-W02W2-E2 through version 2.5.2.

A vulnerability was detected in D-Link DAP-2695 2.00RC131. This affects the function fwupdater_main of the file rgbin of the component Firmware Update Handler. Performing manipulation results in os command injection. The attack may be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in wonderwhy-er DesktopCommanderMCP up to 0.2.13. The affected element is the function extractBaseCommand of the file src/command-manager.ts of the component Absolute Path Handler. Such manipulation leads to os command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The vendor explains: "The usual use case is that AI is asked to do something, picks commands itself, and typically uses simple command names without absolute paths. It's curious why a user would ask the model to bypass restrictions this way. (...) This could potentially be a problem, but we are yet to hear reports of this being an issue in actual workflows. We'll leave this issue open for situations where people may report this as a problem for the long term."

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation in the certificate-generation function, which could potentially allow malicious users to execute remote code on affected devices.

A vulnerability has been found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6 and classified as critical. Affected by this vulnerability is an unknown functionality of the component OSPF Handler. The manipulation of the argument area leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The associated identifier of this vulnerability is VDB-223303. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

TN-5900 Series firmware versions v3.3 and prior are vulnerable to command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

A vulnerability was found in wonderwhy-er DesktopCommanderMCP up to 0.2.13. The impacted element is the function CommandManager of the file src/command-manager.ts. Performing manipulation results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used.

A vulnerability was found in wangzhixuan spring-shiro-training up to 94812c1fd8f7fe796c931f4984ff1aa0671ab562. It has been declared as critical. This vulnerability affects unknown code of the file /role/add. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available.

TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the certification-generation function, which could potentially allow malicious users to execute remote code on affected devices.

An unauthorized command injection vulnerability exists in the ActionLogin function of the webman.lua file in Ikuai router OS through 3.7.1.

The `Release PR Merged` workflow in the github repo taosdata/grafanaplugin is subject to a command injection vulnerability which allows for arbitrary code execution within the github action context due to the insecure usage of `${{ github.event.pull_request.title }}` in a bash command within the GitHub workflow. Attackers can inject malicious commands which will be executed by the workflow. This happens because `${{ github.event.pull_request.title }}` is directly passed to bash command on like 25 of the workflow. This may allow an attacker to gain access to secrets which the github action has access to or to otherwise make use of the compute resources.

An issue was discovered in KaiOS 3.0 before 3.1. The /system/bin/tctweb_server binary exposes a local web server that responds to GET and POST requests on port 2929. The server accepts arbitrary Bash commands and executes them as root. Because it is not permission or context restricted and returns proper CORS headers, it's accessible to all websites via the browser. At a bare minimum, this allows an attacker to retrieve a list of the user's installed apps, notifications, and downloads. It also allows an attacker to delete local files and modify system properties including the boolean persist.moz.killswitch property (which would render the device inoperable). This vulnerability is partially mitigated by SELinux which prevents reads, writes, or modifications to files or permissions within protected partitions.

xml_security.rb in the ruby-saml gem before 1.0.0 for Ruby allows XPath injection and code execution because prepared statements are not used.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contain a command insertion vulnerability in setOpModeCfg. This vulnerability allows an attacker to execute arbitrary commands through the "hostName" parameter.

TOTOLink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the staticGw parameter at /setting/setWanIeCfg.

A remote command execution (RCE) vulnerability in the /api/runscript endpoint of FUXA 1.1.13 allows attackers to execute arbitrary commands via a crafted POST request.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from insufficient input validation in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

A vulnerability was found in Wavlink WL-WN578W2 221110. The impacted element is the function sub_409184 of the file /wizard_rep.shtml. The manipulation of the argument sel_EncrypTyp results in command injection. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from inadequate input validation in the certificate management function, which could potentially allow malicious users to execute remote code on affected devices.

A security vulnerability has been detected in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this issue is some unknown functionality of the file /htdocs/api/playlist/playsinglefile.php. The manipulation of the argument File leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

There is a command injection vulnerability in the Netgear R6250 router with Firmware Version 1.0.4.48. If an attacker gains web management privileges, they can inject commands into the post request parameters, thereby gaining shell privileges.

TOTOLINK X5000R V9.1.0u.6118_B20201102 and V9.1.0u.6369_B20230113 contains a command insertion vulnerability in setDiagnosisCfg.This vulnerability allows an attacker to execute arbitrary commands through the "ip" parameter.

D-Link DIR-600 Hardware Version B5, Firmware Version 2.18 was discovered to contain a command injection vulnerability via the ST parameter in the lxmldbc_system() function.

A command injection vulnerability in the hostTime parameter in the function NTPSyncWithHostof TOTOLINK CP300+ V5.2cu.7594_B20200910 allows attackers to execute arbitrary commands via a crafted http packet.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the setWAN function in /bin/webs without any limitations.

A Command Injection vulnerability in Edimax Wireless Router N300 Firmware BR-6428NS_v4 allows attacker to execute arbitrary code via the formAccept function in /bin/webs without any limitations.

A command injection vulnerability in egg-scripts <v2.8.1 allows arbitrary shell command execution through a maliciously crafted command line argument.

A vulnerability classified as critical has been found in Tenda AC500 2.0.1.9(1307). Affected is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-261144. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The pdfinfojs NPM module versions <= 0.3.6 has a command injection vulnerability that allows an attacker to execute arbitrary commands on the victim's machine.

A command execution vulnerability exists in the validate.so diag_ping_start functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger this vulnerability.

TOTOLINK A3300R v17.0.0cu.557 is vulnerable to Command Injection via /cgi-bin/cstecgi.cgi.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

An issue was discovered in SeaCMS <=12.9 which allows remote attackers to execute arbitrary code via admin_ping.php.

There is a command injection vulnerability in the adslr VW2100 router with firmware version M1DV1.0. An unauthenticated attacker can exploit the vulnerability to execute system commands as the root user.

If exploited, this command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Music Station versions prior to 5.1.13; versions prior to 5.2.9; versions prior to 5.3.11.

In Progress Telerik UI for WPF versions prior to 2024 Q3 (2024.3.924), a command injection attack is possible through improper neutralization of hyperlink elements.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23543.

Shenzen Tenda Technology IP Camera CP3 V11.10.00.2211041355 allows unauthenticated remote code execution via an XML document.

A vulnerability classified as critical has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_FMT_R12R5_1st_DiskMGR of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_source_dev leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability, which was classified as critical, has been found in TOTOLINK CP900 6.3c.566. This issue affects the function setTelnetCfg of the component Telnet Service. The manipulation of the argument telnet_enabled leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-273557 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the FileName parameter in the UploadFirmwareFile function.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the ip parameter in the setDiagnosisCfg function.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain a command injection vulnerability via the pid parameter in the disconnectVPN function.

webservice in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23710.

inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23552.

TOTOLINK X18 V9.1.0cu.2024_B20220329 was discovered to contain multiple command injection vulnerabilities via the rtLogEnabled and rtLogServer parameters in the setSyslogCfg function.