The gst_asf_demux_process_ext_content_desc function in gst/asfdemux/gstasfdemux.c in gst-plugins-ugly in GStreamer allows remote attackers to cause a denial of service (out-of-bounds heap read) via vectors involving extended content descriptors.

The gst_ps_demux_parse_psm function in gst/mpegdemux/gstmpegdemux.c in gst-plugins-bad in GStreamer allows remote attackers to cause a denial of service (invalid memory read and crash) via vectors involving PSM parsing.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_parse_blockgroup_or_simpleblock function within matroska-demux.c. This function does not properly check the validity of the GstBuffer *sub pointer before performing dereferences. As a result, null pointer dereferences may occur. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in gst_wavparse_adtl_chunk within gstwavparse.c. This vulnerability arises due to insufficient validation of the size parameter, which can exceed the bounds of the data buffer. As a result, an OOB read occurs in the following while loop. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been discovered in the qtdemux_parse_svq3_stsd_data function within qtdemux.c. In the FOURCC_SMI_ case, seqh_size is read from the input file without proper validation. If seqh_size is greater than the remaining size of the data buffer, it can lead to an OOB-read in the following call to gst_buffer_fill, which internally uses memcpy. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An integer underflow has been detected in extract_cc_from_data function within qtdemux.c. In the FOURCC_c708 case, the subtraction atom_length - 8 may result in an underflow if atom_length is less than 8. When that subtraction underflows, *cclen ends up being a large number, and then cclen is passed to g_memdup2 leading to an out-of-bounds (OOB) read. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been detected in the parse_lrc function within gstsubparse.c. The parse_lrc function calls strchr() to find the character ']' in the string line. The pointer returned by this call is then passed to g_strdup(). However, if the string line does not contain the character ']', strchr() returns NULL, and a call to g_strdup(start + 1) leads to a null pointer dereference. This vulnerability is fixed in 1.24.10.

Integer overflow in the vmnc decoder in the gstreamer allows remote attackers to cause a denial of service (crash) via large width and height values, which triggers a buffer overflow.

An exploitable denial of service vulnerability exists in the GstRTSPAuth functionality of GStreamer/gst-rtsp-server 1.14.5. A specially crafted RTSP setup request can cause a null pointer deference resulting in denial-of-service. An attacker can send a malicious packet to trigger this vulnerability.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. This function does not properly check the validity of the stream->codec_priv pointer in the following code. If stream->codec_priv is NULL, the call to GST_READ_UINT16_LE will attempt to dereference a null pointer, leading to a crash of the application. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-write vulnerability has been identified in the gst_ssa_parse_remove_override_codes function of the gstssaparse.c file. This function is responsible for parsing and removing SSA (SubStation Alpha) style override codes, which are enclosed in curly brackets ({}). The issue arises when a closing curly bracket "}" appears before an opening curly bracket "{" in the input string. In this case, memmove() incorrectly duplicates a substring. With each successive loop iteration, the size passed to memmove() becomes progressively larger (strlen(end+1)), leading to a write beyond the allocated memory bounds. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference has been discovered in the id3v2_read_synch_uint function, located in id3v2.c. If id3v2_read_synch_uint is called with a null work->hdr.frame_data, the pointer guint8 *data is accessed without validation, resulting in a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_jpeg_dec_negotiate function in gstjpegdec.c. This function does not check for a NULL return value from gst_video_decoder_set_output_state. When this happens, dereferences of the outstate pointer will lead to a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. The function qtdemux_parse_sbgp in qtdemux.c is affected by a null dereference vulnerability. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in qtdemux_parse_container function within qtdemux.c. In the parent function qtdemux_parse_node, the value of length is not well checked. So, if length is big enough, it causes the pointer end to point beyond the boundaries of buffer. Subsequently, in the qtdemux_parse_container function, the while loop can trigger an OOB-read, accessing memory beyond the bounds of buf. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_update_tracks function within matroska-demux.c. The vulnerability occurs when the gst_caps_is_equal function is called with invalid caps values. If this happen, then in the function gst_buffer_get_size the call to GST_BUFFER_MEM_PTR can return a null pointer. Attempting to dereference the size field of this null pointer results in a null pointer dereference. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An integer underflow has been detected in qtdemux_parse_trak function within qtdemux.c. During the strf parsing case, the subtraction size -= 40 can lead to a negative integer overflow if it is less than 40. If this happens, the subsequent call to gst_buffer_fill will invoke memcpy with a large tocopy size, resulting in an OOB-read. This vulnerability is fixed in 1.24.10.

Buffer overflow vulnerability in the codec module Impact: Successful exploitation of this vulnerability may affect availability.

ASUS AC68U <=3.0.0.4.385.20852 is affected by a buffer overflow in blocking.cgi, which may cause a denial of service (DoS).

Buffer Overflow vulnerability in msoulier tftpy commit 467017b844bf6e31745138a30e2509145b0c529c allows a remote attacker to cause a denial of service via the parse function in the TftpPacketFactory class.

A buffer overflow vulnerability in the library "libclinkc" of the Zyxel VMG8825-T50K firmware version 5.50(ABOM.8)C0 could allow an unauthenticated attacker to cause denial of service (DoS) conditions by sending a crafted HTTP request to a vulnerable device.

The eglibc package before 2.14 incorrectly handled the getaddrinfo() function. An attacker could use this issue to cause a denial of service.

A heap buffer overflow in the XML Text Escaping component of Qualisys C++ SDK commit a32a21a allows attackers to cause Denial of Service (DoS) via escaping special XML characters.

Transient DOS may occur while processing the country IE.

Buffer Overflow vulnerability found in En3rgy WebcamServer v.0.5.2 allows a remote attacker to cause a denial of service via the WebcamServer.exe file.

Buffer overflow in NetRxPkt::ehdr_buf in hw/net/net_rx_pkt.c in QEMU (aka Quick Emulator), when the VLANSTRIP feature is enabled on the vmxnet3 device, allows remote attackers to cause a denial of service (out-of-bounds access and QEMU process crash) via vectors related to VLAN stripping.

In Memcached before 1.6.22, a buffer overflow exists when processing multiget requests in proxy mode, if there are many spaces after the "get" substring.

An issue was discovered in YottaDB through r1.32 and V7.0-000 and FIS GT.M through V7.0-000. Using crafted input, an attacker can cause a call to $Extract to force an signed integer holding the size of a buffer to take on a large negative number, which is then used as the length of a memcpy call that occurs on the stack, causing a buffer overflow.

Some Huawei products have a buffer error vulnerability. An unauthenticated, remote attacker could send specific MPLS Echo Request messages to the target products. Due to insufficient input validation of some parameters in the messages, successful exploit may cause the device to reset.

Serva 4.4.0 allows remote attackers to cause a denial of service (daemon crash) via a TFTP read (RRQ) request, aka opcode 1, a related issue to CVE-2013-0145.

Pinkie 2.15 allows remote attackers to cause a denial of service (daemon crash) via a TFTP read (RRQ) request, aka opcode 1.

A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2407), Opcenter Quality (All versions < V2312), SIMATIC PCS neo (All versions < V4.1), SINEC NMS (All versions < V2.0 SP1), Totally Integrated Automation Portal (TIA Portal) V14 (All versions), Totally Integrated Automation Portal (TIA Portal) V15.1 (All versions), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions < V17 Update 8), Totally Integrated Automation Portal (TIA Portal) V18 (All versions < V18 Update 3). The affected application contains an out of bounds write past the end of an allocated buffer when handling specific requests on port 4002/tcp and 4004/tcp. This could allow an attacker to crash the application. The corresponding service is auto-restarted after the crash.

The video framework has memory overwriting caused by addition overflow. Successful exploitation of this vulnerability may affect availability.

The video framework has memory overwriting caused by addition overflow. Successful exploitation of this vulnerability may affect availability.

A buffer overflow in modsecurity v3.0.12 allows attackers to cause a Denial of Service (DoS) via a crafted input inserted into the name parameter. NOTE: this is disputed by the Supplier because it cannot be reproduced. Also, the product's documentation indicates that it is not guaranteed to be usable with very large values of SecRequestBodyNoFilesLimit (which are required by the claimed issue).

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sProfileName parameter at wizfw.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

USG9500 with versions of V500R001C30;V500R001C60 have a denial of service vulnerability. Due to a flaw in the X.509 implementation in the affected products which can result in a large heap buffer overrun error, an attacker may exploit the vulnerability by a malicious certificate, resulting a denial of service on the affected products.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the extRadSrv2 parameter at cgiapp.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sCloudPass parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

A NULL pointer dereference in libcoap v4.3.5-rc2 and below allows a remote attacker to cause a denial of service via the coap_handle_request_put_block function in src/coap_block.c.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sSrvName parameter at service.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sProfileName parameter at fextobj.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the newProname parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sPubKey parameter at dialin.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sStRtMskShow parameter at ipstrt.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sBPA_Pwd parameter at inet15.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2407), Opcenter Quality (All versions < V2312), SIMATIC PCS neo (All versions < V4.1), SINEC NMS (All versions < V2.0 SP1), Totally Integrated Automation Portal (TIA Portal) V14 (All versions), Totally Integrated Automation Portal (TIA Portal) V15.1 (All versions), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions < V17 Update 8), Totally Integrated Automation Portal (TIA Portal) V18 (All versions < V18 Update 3). The affected application contains an out of bounds write past the end of an allocated buffer when handling specific requests on port 4002/tcp. This could allow an attacker to crash the application. The corresponding service is auto-restarted after the crash.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sPeerId parameter at vpn.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.