An information disclosure vulnerability exists in multiple ManageEngine products that can result in encryption keys being exposed. A low-privileged OS user with access to the host where an affected ManageEngine product is installed can view and use the exposed key to decrypt product database passwords. This allows the user to access the ManageEngine product database.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix FFA device names for logical partitions Each physical partition can provide multiple services each with UUID. Each such service can be presented as logical partition with a unique combination of VM ID and UUID. The number of distinct UUID in a system will be less than or equal to the number of logical partitions. However, currently it fails to register more than one logical partition or service within a physical partition as the device name contains only VM ID while both VM ID and UUID are maintained in the partition information. The kernel complains with the below message: | sysfs: cannot create duplicate filename '/devices/arm-ffa-8001' | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8 | Hardware name: FVP Base RevC (DT) | Call trace: | dump_backtrace+0xf8/0x118 | show_stack+0x18/0x24 | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | sysfs_create_dir_ns+0xe0/0x13c | kobject_add_internal+0x220/0x3d4 | kobject_add+0x94/0x100 | device_add+0x144/0x5d8 | device_register+0x20/0x30 | ffa_device_register+0x88/0xd8 | ffa_setup_partitions+0x108/0x1b8 | ffa_init+0x2ec/0x3a4 | do_one_initcall+0xcc/0x240 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x100/0x16c | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 | kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to | register things with the same name in the same directory. | arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17 | ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001 By virtue of being random enough to avoid collisions when generated in a distributed system, there is no way to compress UUID keys to the number of bits required to identify each. We can eliminate '-' in the name but it is not worth eliminating 4 bytes and add unnecessary logic for doing that. Also v1.0 doesn't provide the UUID of the partitions which makes it hard to use the same for the device name. So to keep it simple, let us alloc an ID using ida_alloc() and append the same to "arm-ffa" to make up a unique device name. Also stash the id value in ffa_dev to help freeing the ID later when the device is destroyed.

In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro In the TDX_HYPERCALL asm, after the TDCALL instruction returns from the untrusted VMM, the registers that the TDX guest shares to the VMM need to be cleared to avoid speculative execution of VMM-provided values. RSI is specified in the bitmap of those registers, but it is missing when zeroing out those registers in the current TDX_HYPERCALL. It was there when it was originally added in commit 752d13305c78 ("x86/tdx: Expand __tdx_hypercall() to handle more arguments"), but was later removed in commit 1e70c680375a ("x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()"), which was correct because %rsi is later restored in the "pop %rsi". However a later commit 7a3a401874be ("x86/tdx: Drop flags from __tdx_hypercall()") removed that "pop %rsi" but forgot to add the "xor %rsi, %rsi" back. Fix by adding it back.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed when we receive the response.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix kernel warning when sending SYN message When sending a SYN message, this kernel stack trace is observed: ... [ 13.396352] RIP: 0010:_copy_from_iter+0xb4/0x550 ... [ 13.398494] Call Trace: [ 13.398630] <TASK> [ 13.398630] ? __alloc_skb+0xed/0x1a0 [ 13.398630] tipc_msg_build+0x12c/0x670 [tipc] [ 13.398630] ? shmem_add_to_page_cache.isra.71+0x151/0x290 [ 13.398630] __tipc_sendmsg+0x2d1/0x710 [tipc] [ 13.398630] ? tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __local_bh_enable_ip+0x37/0x80 [ 13.398630] tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __sys_connect+0x9f/0xd0 [ 13.398630] __sys_connect+0x9f/0xd0 [ 13.398630] ? preempt_count_add+0x4d/0xa0 [ 13.398630] ? fpregs_assert_state_consistent+0x22/0x50 [ 13.398630] __x64_sys_connect+0x16/0x20 [ 13.398630] do_syscall_64+0x42/0x90 [ 13.398630] entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because commit a41dad905e5a ("iov_iter: saner checks for attempt to copy to/from iterator") has introduced sanity check for copying from/to iov iterator. Lacking of copy direction from the iterator viewpoint would lead to kernel stack trace like above. This commit fixes this issue by initializing the iov iterator with the correct copy direction when sending SYN or ACK without data.

In the Linux kernel, the following vulnerability has been resolved: libceph: just wait for more data to be available on the socket A short read may occur while reading the message footer from the socket. Later, when the socket is ready for another read, the messenger invokes all read_partial_*() handlers, including read_partial_sparse_msg_data(). The expectation is that read_partial_sparse_msg_data() would bail, allowing the messenger to invoke read_partial() for the footer and pick up where it left off. However read_partial_sparse_msg_data() violates that and ends up calling into the state machine in the OSD client. The sparse-read state machine assumes that it's a new op and interprets some piece of the footer as the sparse-read header and returns bogus extents/data length, etc. To determine whether read_partial_sparse_msg_data() should bail, let's reuse cursor->total_resid. Because once it reaches to zero that means all the extents and data have been successfully received in last read, else it could break out when partially reading any of the extents and data. And then osd_sparse_read() could continue where it left off. [ idryomov: changelog ]

In the Linux kernel, the following vulnerability has been resolved: ceph: fix cred leak in ceph_mds_check_access() get_current_cred() increments the reference counter, but the put_cred() call was missing.

IBM Common Licensing 9.0 stores user credentials in plain clear text which can be read by a local user.

sec_attest_info in drivers/accel/habanalabs/common/habanalabs_ioctl.c in the Linux kernel through 6.6.5 allows an information leak to user space because info->pad0 is not initialized.

drivers/scsi/stex.c in the Linux kernel through 5.19.9 allows local users to obtain sensitive information from kernel memory because stex_queuecommand_lck lacks a memset for the PASSTHRU_CMD case.

Sensitive information disclosure due to insecure folder permissions. The following products are affected: Acronis Cyber Protect 16 (Linux, Windows) before build 37391.

In the Linux kernel, the following vulnerability has been resolved: x86: fix user address masking non-canonical speculation issue It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical accesses in kernel space. And so using just the high bit to decide whether an access is in user space or kernel space ends up with the good old "leak speculative data" if you have the right gadget using the result: CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“ Now, the kernel surrounds the access with a STAC/CLAC pair, and those instructions end up serializing execution on older Zen architectures, which closes the speculation window. But that was true only up until Zen 5, which renames the AC bit [1]. That improves performance of STAC/CLAC a lot, but also means that the speculation window is now open. Note that this affects not just the new address masking, but also the regular valid_user_address() check used by access_ok(), and the asm version of the sign bit check in the get_user() helpers. It does not affect put_user() or clear_user() variants, since there's no speculative result to be used in a gadget for those operations.

Sensitive information leak through log files. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 35433.

In the Linux kernel before 6.5.9, there is a NULL pointer dereference in send_acknowledge in net/nfc/nci/spi.c.

In the Linux kernel, the following vulnerability has been resolved: HID: core: zero-initialize the report buffer Since the report buffer is used by all kinds of drivers in various ways, let's zero-initialize it during allocation to make sure that it can't be ever used to leak kernel memory via specially-crafted report.

Sensitive information disclosure due to missing authorization. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 35739.

Sensitive information leak through log files. The following products are affected: Acronis Cyber Protect Cloud Agent (Linux, macOS, Windows) before build 35739, Acronis Cyber Protect 16 (Linux, macOS, Windows) before build 37391.

Sensitive information disclosure due to missing authorization. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 36119.

In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error The `nouveau_dmem_copy_one` function ensures that the copy push command is sent to the device firmware but does not track whether it was executed successfully. In the case of a copy error (e.g., firmware or hardware failure), the copy push command will be sent via the firmware channel, and `nouveau_dmem_copy_one` will likely report success, leading to the `migrate_to_ram` function returning a dirty HIGH_USER page to the user. This can result in a security vulnerability, as a HIGH_USER page that may contain sensitive or corrupted data could be returned to the user. To prevent this vulnerability, we allocate a zero page. Thus, in case of an error, a non-dirty (zero) page will be returned to the user.

Sensitive information disclosure due to missing authorization. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 35739.

A memory leak flaw was found in nft_set_catchall_flush in net/netfilter/nf_tables_api.c in the Linux Kernel. This issue may allow a local attacker to cause double-deactivations of catchall elements, which can result in a memory leak.

In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter).

Sensitive information disclosure due to missing authorization. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 35739.

Insertion of Sensitive Information into Temporary File vulnerability in Hitachi Infrastructure Analytics Advisor on Linux (Analytics probe component), Hitachi Ops Center Analyzer on Linux (Hitachi Ops Center Analyzer probe component) allows local users to gain sensitive information. This issue affects Hitachi Infrastructure Analytics Advisor: from 2.0.0-00 through 4.4.0-00; Hitachi Ops Center Analyzer: from 10.0.0-00 before 10.9.0-00.

In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: prevent kernel-usb-infoleak The syzbot reported a kernel-usb-infoleak in usbtmc_write, we need to clear the structure before filling fields.

In the Linux kernel, the following vulnerability has been resolved: icmp: change the order of rate limits ICMP messages are ratelimited : After the blamed commits, the two rate limiters are applied in this order: 1) host wide ratelimit (icmp_global_allow()) 2) Per destination ratelimit (inetpeer based) In order to avoid side-channels attacks, we need to apply the per destination check first. This patch makes the following change : 1) icmp_global_allow() checks if the host wide limit is reached. But credits are not yet consumed. This is deferred to 3) 2) The per destination limit is checked/updated. This might add a new node in inetpeer tree. 3) icmp_global_consume() consumes tokens if prior operations succeeded. This means that host wide ratelimit is still effective in keeping inetpeer tree small even under DDOS. As a bonus, I removed icmp_global.lock as the fast path can use a lock-free operation.

IBM Sterling External Authentication Server 6.1.0 and IBM Sterling Secure Proxy 6.0.3 uses weaker than expected cryptographic algorithms during installation that could allow a local attacker to decrypt sensitive information. IBM X-Force ID: 231373.

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix leak of blob encryption key Trusted keys unseal the key blob on load, but keep the sealed payload in the blob field so that every subsequent read (export) will simply convert this field to hex and send it to userspace. With DCP-based trusted keys, we decrypt the blob encryption key (BEK) in the Kernel due hardware limitations and then decrypt the blob payload. BEK decryption is done in-place which means that the trusted key blob field is modified and it consequently holds the BEK in plain text. Every subsequent read of that key thus send the plain text BEK instead of the encrypted BEK to userspace. This issue only occurs when importing a trusted DCP-based key and then exporting it again. This should rarely happen as the common use cases are to either create a new trusted key and export it, or import a key blob and then just use it without exporting it again. Fix this by performing BEK decryption and encryption in a dedicated buffer. Further always wipe the plain text BEK buffer to prevent leaking the key via uninitialized memory.

IBM Security Verify Bridge Directory Sync 1.0.1 through 1.0.12, IBM Security Verify Gateway for Windows Login 1.0.1 through 1.0.10, and IBM Security Verify Gateway for Radius 1.0.1 through 1.0.11 stores user credentials in configuration files which can be read by a local user.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 could disclose highly sensitive information to a local user due to inproper storage of a plaintext cryptographic key. IBM X-Force ID: 198187.

Integer overflow in the btrfs_ioctl_clone function in fs/btrfs/ioctl.c in the Linux kernel before 2.6.35 might allow local users to obtain sensitive information via a BTRFS_IOC_CLONE_RANGE ioctl call.

In the Linux kernel, the following vulnerability has been resolved: nvmem: core: limit cell sysfs permissions to main attribute ones The cell sysfs attribute should not provide more access to the nvmem data than the main attribute itself. For example if nvme_config::root_only was set, the cell attribute would still provide read access to everybody. Mask out permissions not available on the main attribute.

A flaw was found in s390 eBPF JIT in bpf_jit_insn in arch/s390/net/bpf_jit_comp.c in the Linux kernel. In this flaw, a local attacker with special user privilege can circumvent the verifier and may lead to a confidentiality problem.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find() Syzbot reports a warning as follows: ============================================ WARNING: CPU: 0 PID: 5075 at fs/mbcache.c:419 mb_cache_destroy+0x224/0x290 Modules linked in: CPU: 0 PID: 5075 Comm: syz-executor199 Not tainted 6.9.0-rc6-gb947cc5bf6d7 RIP: 0010:mb_cache_destroy+0x224/0x290 fs/mbcache.c:419 Call Trace: <TASK> ext4_put_super+0x6d4/0xcd0 fs/ext4/super.c:1375 generic_shutdown_super+0x136/0x2d0 fs/super.c:641 kill_block_super+0x44/0x90 fs/super.c:1675 ext4_kill_sb+0x68/0xa0 fs/ext4/super.c:7327 [...] ============================================ This is because when finding an entry in ext4_xattr_block_cache_find(), if ext4_sb_bread() returns -ENOMEM, the ce's e_refcnt, which has already grown in the __entry_find(), won't be put away, and eventually trigger the above issue in mb_cache_destroy() due to reference count leakage. So call mb_cache_entry_put() on the -ENOMEM error branch as a quick fix.

Certain files with overly permissive permissions were identified in the out-of-support Control-M/Agent versions 9.0.18 to 9.0.20 and potentially earlier unsupported versions as well as in newer versions which were upgraded from an affected version. These files contain keys and passwords relating to SSL files, keystore and policies. An attacker with local access to the system running the Agent can access these files.

Insertion of Sensitive Information into Log File vulnerability in Hitachi Ops Center Analyzer on Linux (Virtual Strage Software Agent component) allows local users to gain sensitive information. This issue affects Hitachi Ops Center Analyzer: from 10.8.1-00 before 10.9.0-00

Sensitive information disclosure and manipulation due to missing authorization. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 29258.

Sensitive information disclosure due to missing authorization. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 35739.

The swiotlb_print_info function in lib/swiotlb.c in the Linux kernel through 4.14.14 allows local users to obtain sensitive address information by reading dmesg data from a "software IO TLB" printk call.

The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file.

Sensitive information disclosure due to missing authorization. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 32047.

In the Linux kernel, the following vulnerability has been resolved: net: macsec: Fix offload support for NETDEV_UNREGISTER event Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event.

Insufficiently Protected Credentials vulnerability in the remote backups application on Western Digital My Cloud devices that could allow an attacker who has gained access to a relevant endpoint to use that information to access protected data. This issue affects: Western Digital My Cloud My Cloud versions prior to 5.25.124 on Linux.

An out-of-bounds memory read flaw was found in the Linux kernel's BPF subsystem in how a user calls the bpf_tail_call function with a key larger than the max_entries of the map. This flaw allows a local user to gain unauthorized access to data.

There exists an arbitrary memory read within the Linux Kernel BPF - Constants provided to fill pointers in structs passed in to bpf_sys_bpf are not verified and can point anywhere, including memory not owned by BPF. An attacker with CAP_BPF can arbitrarily read memory from anywhere on the system. We recommend upgrading past commit 86f44fcec22c

An issue was discovered in the Linux kernel before 5.16.12. drivers/net/usb/sr9700.c allows attackers to obtain sensitive information from heap memory via crafted frame lengths from a device.

Improper conditions check in the Intel(R) SGX SDK software may allow a privileged user to potentially enable information disclosure via local access.

Insufficient control flow management for the Intel(R) SGX SDK software for Linux before version 2.16.100.1 may allow an authenticated user to potentially enable information disclosure via local access.

An issue was discovered in drivers/usb/gadget/function/rndis.c in the Linux kernel before 5.16.10. The RNDIS USB gadget lacks validation of the size of the RNDIS_MSG_SET command. Attackers can obtain sensitive information from kernel memory.