Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Tenda W9 V1.0.0.7(4456)_CN was discovered to contain a command injection vulnerability via the function formGetDiagnoseInfo .

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the webwlanidx parameter in /setting/setWebWlanIdx.

An OS command injection vulnerability exists in the web interface util_set_serial_mac functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability.

A command injection vulnerability in the component /SetTriggerLEDBlink/Blink of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

It is found that there is a command injection vulnerability in the setWiFiWpsStart interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the filename parameter in /setting/setUpgradeFW.

There is a command injection vulnerability at the /goform/setsambacfg interface of Tenda AC15 US_AC15V1.0BR_V15.03.05.20_multi_TDE01.bin device web, which can also cooperate with CVE-2021-44971 to cause unconditional arbitrary command execution

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the langtype parameter in /setting/setLanguageCfg.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the devicename parameter in /setting/setDeviceName.

Dataprobe iBoot-PDU FW versions prior to 1.42.06162022 contain a vulnerability where a specific function does not sanitize the input provided by the user, which may expose the affected to an OS command injection vulnerability.

Unify OpenStage / OpenScape Desk Phone IP before V3 R3.11.0 SIP has an OS command injection vulnerability in the web based management interface

Tenda TX9 Pro 22.03.02.10 devices allow OS command injection via set_route (called by doSystemCmd_route).

A command injection security vulnerability has been identified in HPE Nimble Storage Hybrid Flash Arrays, HPE Nimble Storage All Flash Arrays and HPE Nimble Storage Secondary Flash Arrays that could allow an attacker to execute arbitrary commands on a Nimble appliance. HPE has made the following software updates to resolve the vulnerability in HPE Nimble Storage: 5.0.10.100 or later, 5.2.1.0 or later, 6.0.0.100 or later.

An issue was discovered on Fujitsu ETERNUS CentricStor CS8000 (Control Center) devices before 8.1A SP02 P04. The vulnerability resides in the requestTempFile function in hw_view.php. An attacker is able to influence the unitName POST parameter and inject special characters such as semicolons, backticks, or command-substitution sequences in order to force the application to execute arbitrary commands.

A vulnerability was identified in Tenda AC20 16.03.08.12. Affected is the function websFormDefine of the file /goform/telnet of the component Telnet Service. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

It is found that there is a command injection vulnerability in the setL2tpServerCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the filename parameter in /setting/setUploadSetting.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the ipdoamin parameter in /setting/setDiagnosisCfg.

D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetNTPserverSeting. This vulnerability allows attackers to execute arbitrary commands via the system_time_timezone parameter.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

It is found that there is a command injection vulnerability in the setOpenVpnCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a command injection vulnerability via the pingSet function.

Realtek rtl819x-SDK before v3.6.1 allows command injection over the web interface.

TOTOlink EX1200L V9.3.5u.6146_B20201023 is vulnerable to arbitrary command execution via the cstecgi.cgi setOpModeCfg interface.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the devicemac parameter in /setting/setDeviceName.

Spryker Commerce OS 1.4.2 allows Remote Command Execution.

Tenda AX1806 v1.0.0.1 was discovered to contain a command injection vulnerability in `SetIPv6Status` function

A vulnerability was found in D-Link DIR‑818L up to 1.05B01. This issue affects the function getenv of the file /htdocs/cgibin of the component ssdpcgi. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

The web console of FUJITSU Network IPCOM series (IPCOM EX2 IN(3200, 3500), IPCOM EX2 LB(1100, 3200, 3500), IPCOM EX2 SC(1100, 3200, 3500), IPCOM EX2 NW(1100, 3200, 3500), IPCOM EX2 DC, IPCOM EX2 DC, IPCOM EX IN(2300, 2500, 2700), IPCOM EX LB(1100, 1300, 2300, 2500, 2700), IPCOM EX SC(1100, 1300, 2300, 2500, 2700), and IPCOM EX NW(1100, 1300, 2300, 2500, 2700)) allows a remote attacker to execute an arbitrary OS command via unspecified vectors.

An OS command injection vulnerability exists in the console_main_loop :sys functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9Z. A specially-crafted XCMD can lead to arbitrary command execution. An attacker can send an XML payload to trigger this vulnerability.

Exposed Erlang Cookie could lead to Remote Command Execution (RCE) attack. Communication between Erlang nodes is done by exchanging a shared secret (aka "magic cookie"). There are cases where the magic cookie is included in the content of the logs. An attacker can use the cookie to attach to an Erlang node and run OS level commands on the system running the Erlang node. Affects version: 6.5.1. Fix version: 6.6.0.

The npm-dependency-versions package through 0.3.0 for Node.js allows command injection if an attacker is able to call dependencyVersions with a JSON object in which pkgs is a key, and there are shell metacharacters in a value.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the hosttime function in /setting/NTPSyncWithHost.

The [`tj-actions/verify-changed-files`](https://github.com/tj-actions/verify-changed-files) action allows for command injection in changed filenames, allowing an attacker to execute arbitrary code and potentially leak secrets. The [`verify-changed-files`](https://github.com/tj-actions/verify-changed-files) workflow returns the list of files changed within a workflow execution. This could potentially allow filenames that contain special characters such as `;` which can be used by an attacker to take over the [GitHub Runner](https://docs.github.com/en/actions/using-github-hosted-runners/about-github-hosted-runners) if the output value is used in a raw fashion (thus being directly replaced before execution) inside a `run` block. By running custom commands, an attacker may be able to steal secrets such as `GITHUB_TOKEN` if triggered on other events than `pull_request`. This has been patched in versions [17](https://github.com/tj-actions/verify-changed-files/releases/tag/v17) and [17.0.0](https://github.com/tj-actions/verify-changed-files/releases/tag/v17.0.0) by enabling `safe_output` by default and returning filename paths escaping special characters for bash environments.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

SmartFabric storage software version 1.0.0 contains a Command-Injection vulnerability. A remote unauthenticated attacker may potentially exploit this vulnerability to gain access and perform actions on the affected system.

A condition exists in FlashArray and FlashBlade Purity whereby a malicious user could execute arbitrary commands remotely through a specifically crafted SNMP configuration.

resi-calltrace in RESI Gemini-Net 4.2 is affected by OS Command Injection. It does not properly check the parameters sent as input before they are processed on the server. Due to the lack of validation of user input, an unauthenticated attacker can bypass the syntax intended by the software (e.g., concatenate `&|;\r\ commands) and inject arbitrary system commands with the privileges of the application user.

It is found that there is a command injection vulnerability in the setopenvpnclientcfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows attackers to execute arbitrary commands through a carefully constructed payload

D-Link DIR-645 v1.03 was discovered to contain a command injection vulnerability via the QUERY_STRING parameter at __ajax_explorer.sgi.

D-Link DIR-822+ V1.0.2 was found to contain a command injection in SetStaticRouteSettings function. allows remote attackers to execute arbitrary commands via shell.

It is found that there is a command injection vulnerability in the setWiFiAdvancedCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

NETGEAR R8500 1.0.2.158 devices allow remote authenticated users to execute arbitrary commands (such as telnetd) via shell metacharacters in the sysNewPasswd and sysConfirmPasswd parameters to password.cgi.

An issue was discovered on Dasan GPON home routers. Command Injection can occur via the dest_host parameter in a diag_action=ping request to a GponForm/diag_Form URI. Because the router saves ping results in /tmp and transmits them to the user when the user revisits /diag.html, it's quite simple to execute commands and retrieve their output.

A command injection vulnerability exists in Moxa Inc VPort 461 Series Firmware Version 3.4 or lower that could allow a remote attacker to execute arbitrary commands in Moxa's VPort 461 Series Industrial Video Servers.

An issue in adm.cgi of WAVLINK AERIAL X 1200M M79X3.V5030.180719 allows attackers to execute arbitrary commands via a crafted POST request.