In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix Virtual Memory mapping boundaries calculation Calculating the size of the mapped area as the lesser value between the requested size and the actual size does not consider the partial mapping offset. This can cause page fault access. Fix the calculation of the starting and ending addresses, the total size is now deduced from the difference between the end and start addresses. Additionally, the calculations have been rewritten in a clearer and more understandable form. [Joonas: Add Requires: tag] Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset") (cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)

A flaw was found in the Linux kernel before 5.9-rc4. A failure of the file system metadata validator in XFS can cause an inode with a valid, user-creatable extended attribute to be flagged as corrupt. This can lead to the filesystem being shutdown, or otherwise rendered inaccessible until it is remounted, leading to a denial of service. The highest threat from this vulnerability is to system availability.

In the Linux kernel, the following vulnerability has been resolved: l2tp: pass correct message length to ip6_append_data l2tp_ip6_sendmsg needs to avoid accounting for the transport header twice when splicing more data into an already partially-occupied skbuff. To manage this, we check whether the skbuff contains data using skb_queue_empty when deciding how much data to append using ip6_append_data. However, the code which performed the calculation was incorrect: ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0; ...due to C operator precedence, this ends up setting ulen to transhdrlen for messages with a non-zero length, which results in corrupted packets on the wire. Add parentheses to correct the calculation in line with the original intent.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/dsc: Fix the macro that calculates DSCC_/DSCA_ PPS reg address Commit bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS register") defines a new macro to calculate the DSC PPS register addresses with PPS number as an input. This macro correctly calculates the addresses till PPS 11 since the addresses increment by 4. So in that case the following macro works correctly to give correct register address: _MMIO(_DSCA_PPS_0 + (pps) * 4) However after PPS 11, the register address for PPS 12 increments by 12 because of RC Buffer memory allocation in between. Because of this discontinuity in the address space, the macro calculates wrong addresses for PPS 12 - 16 resulting into incorrect DSC PPS parameter value read/writes causing DSC corruption. This fixes it by correcting this macro to add the offset of 12 for PPS >=12. v3: Add correct paranthesis for pps argument (Jani Nikula) (cherry picked from commit 6074be620c31dc2ae11af96a1a5ea95580976fb5)

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof-nau8825: fix module alias overflow The maximum name length for a platform_device_id entry is 20 characters including the trailing NUL byte. The sof_nau8825.c file exceeds that, which causes an obscure error message: sound/soc/intel/boards/snd-soc-sof_nau8825.mod.c:35:45: error: illegal character encoding in string literal [-Werror,-Winvalid-source-encoding] MODULE_ALIAS("platform:adl_max98373_nau8825<U+0018><AA>"); ^~~~ include/linux/module.h:168:49: note: expanded from macro 'MODULE_ALIAS' ^~~~~~ include/linux/module.h:165:56: note: expanded from macro 'MODULE_INFO' ^~~~ include/linux/moduleparam.h:26:47: note: expanded from macro '__MODULE_INFO' = __MODULE_INFO_PREFIX __stringify(tag) "=" info I could not figure out how to make the module handling robust enough to handle this better, but as a quick fix, using slightly shorter names that are still unique avoids the build issue.

An out-of-bounds memory access flaw was found in the Linux kernel Intel’s iSMT SMBus host controller driver in the way a user triggers the I2C_SMBUS_BLOCK_DATA (with the ioctl I2C_SMBUS) with malicious input data. This flaw allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix possible invalid register access Disable the interrupt and synchronze for the pending irq handlers to ensure the irq tasklet is not being scheduled after the suspend to avoid the possible invalid register access acts when the host pcie controller is suspended. [17932.910534] mt7921e 0000:01:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 21375 usecs [17932.910590] pcieport 0000:00:00.0: calling pci_pm_suspend+0x0/0x22c @ 18565, parent: pci0000:00 [17932.910602] pcieport 0000:00:00.0: pci_pm_suspend+0x0/0x22c returned 0 after 8 usecs [17932.910671] mtk-pcie 11230000.pcie: calling platform_pm_suspend+0x0/0x60 @ 22783, parent: soc [17932.910674] mtk-pcie 11230000.pcie: platform_pm_suspend+0x0/0x60 returned 0 after 0 usecs ... 17933.615352] x1 : 00000000000d4200 x0 : ffffff8269ca2300 [17933.620666] Call trace: [17933.623127] mt76_mmio_rr+0x28/0xf0 [mt76] [17933.627234] mt7921_rr+0x38/0x44 [mt7921e] [17933.631339] mt7921_irq_tasklet+0x54/0x1d8 [mt7921e] [17933.636309] tasklet_action_common+0x12c/0x16c [17933.640754] tasklet_action+0x24/0x2c [17933.644418] __do_softirq+0x16c/0x344 [17933.648082] irq_exit+0xa8/0xac [17933.651224] scheduler_ipi+0xd4/0x148 [17933.654890] handle_IPI+0x164/0x2d4 [17933.658379] gic_handle_irq+0x140/0x178 [17933.662216] el1_irq+0xb8/0x180 [17933.665361] cpuidle_enter_state+0xf8/0x204 [17933.669544] cpuidle_enter+0x38/0x4c [17933.673122] do_idle+0x1a4/0x2a8 [17933.676352] cpu_startup_entry+0x24/0x28 [17933.680276] rest_init+0xd4/0xe0 [17933.683508] arch_call_rest_init+0x10/0x18 [17933.687606] start_kernel+0x340/0x3b4 [17933.691279] Code: aa0003f5 d503201f f953eaa8 8b344108 (b9400113) [17933.697373] ---[ end trace a24b8e26ffbda3c5 ]--- [17933.767846] Kernel panic - not syncing: Fatal exception in interrupt

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix NULL pointer dereference in ocfs2_journal_dirty() bdev->bd_super has been removed and commit 8887b94d9322 change the usage from bdev->bd_super to b_assoc_map->host->i_sb. This introduces the following NULL pointer dereference in ocfs2_journal_dirty() since b_assoc_map is still not initialized. This can be easily reproduced by running xfstests generic/186, which simulate no more credits. [ 134.351592] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 134.355341] RIP: 0010:ocfs2_journal_dirty+0x14f/0x160 [ocfs2] ... [ 134.365071] Call Trace: [ 134.365312] <TASK> [ 134.365524] ? __die_body+0x1e/0x60 [ 134.365868] ? page_fault_oops+0x13d/0x4f0 [ 134.366265] ? __pfx_bit_wait_io+0x10/0x10 [ 134.366659] ? schedule+0x27/0xb0 [ 134.366981] ? exc_page_fault+0x6a/0x140 [ 134.367356] ? asm_exc_page_fault+0x26/0x30 [ 134.367762] ? ocfs2_journal_dirty+0x14f/0x160 [ocfs2] [ 134.368305] ? ocfs2_journal_dirty+0x13d/0x160 [ocfs2] [ 134.368837] ocfs2_create_new_meta_bhs.isra.51+0x139/0x2e0 [ocfs2] [ 134.369454] ocfs2_grow_tree+0x688/0x8a0 [ocfs2] [ 134.369927] ocfs2_split_and_insert.isra.67+0x35c/0x4a0 [ocfs2] [ 134.370521] ocfs2_split_extent+0x314/0x4d0 [ocfs2] [ 134.371019] ocfs2_change_extent_flag+0x174/0x410 [ocfs2] [ 134.371566] ocfs2_add_refcount_flag+0x3fa/0x630 [ocfs2] [ 134.372117] ocfs2_reflink_remap_extent+0x21b/0x4c0 [ocfs2] [ 134.372994] ? inode_update_timestamps+0x4a/0x120 [ 134.373692] ? __pfx_ocfs2_journal_access_di+0x10/0x10 [ocfs2] [ 134.374545] ? __pfx_ocfs2_journal_access_di+0x10/0x10 [ocfs2] [ 134.375393] ocfs2_reflink_remap_blocks+0xe4/0x4e0 [ocfs2] [ 134.376197] ocfs2_remap_file_range+0x1de/0x390 [ocfs2] [ 134.376971] ? security_file_permission+0x29/0x50 [ 134.377644] vfs_clone_file_range+0xfe/0x320 [ 134.378268] ioctl_file_clone+0x45/0xa0 [ 134.378853] do_vfs_ioctl+0x457/0x990 [ 134.379422] __x64_sys_ioctl+0x6e/0xd0 [ 134.379987] do_syscall_64+0x5d/0x170 [ 134.380550] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 134.381231] RIP: 0033:0x7fa4926397cb [ 134.381786] Code: 73 01 c3 48 8b 0d bd 56 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8d 56 38 00 f7 d8 64 89 01 48 [ 134.383930] RSP: 002b:00007ffc2b39f7b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 134.384854] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fa4926397cb [ 134.385734] RDX: 00007ffc2b39f7f0 RSI: 000000004020940d RDI: 0000000000000003 [ 134.386606] RBP: 0000000000000000 R08: 00111a82a4f015bb R09: 00007fa494221000 [ 134.387476] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 134.388342] R13: 0000000000f10000 R14: 0000558e844e2ac8 R15: 0000000000f10000 [ 134.389207] </TASK> Fix it by only aborting transaction and journal in ocfs2_journal_dirty() now, and leave ocfs2_abort() later when detecting an aborted handle, e.g. start next transaction. Also log the handle details in this case.

In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: fix endpoint checking in cxacru_bind() Syzbot is still reporting quite an old issue [1] that occurs due to incomplete checking of present usb endpoints. As such, wrong endpoints types may be used at urb sumbitting stage which in turn triggers a warning in usb_submit_urb(). Fix the issue by verifying that required endpoint types are present for both in and out endpoints, taking into account cmd endpoint type. Unfortunately, this patch has not been tested on real hardware. [1] Syzbot report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 8667 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 0 PID: 8667 Comm: kworker/0:4 Not tainted 5.14.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 ... Call Trace: cxacru_cm+0x3c0/0x8e0 drivers/usb/atm/cxacru.c:649 cxacru_card_status+0x22/0xd0 drivers/usb/atm/cxacru.c:760 cxacru_bind+0x7ac/0x11a0 drivers/usb/atm/cxacru.c:1209 usbatm_usb_probe+0x321/0x1ae0 drivers/usb/atm/usbatm.c:1055 cxacru_usb_probe+0xdf/0x1e0 drivers/usb/atm/cxacru.c:1363 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 call_driver_probe drivers/base/dd.c:517 [inline] really_probe+0x23c/0xcd0 drivers/base/dd.c:595 __driver_probe_device+0x338/0x4d0 drivers/base/dd.c:747 driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:777 __device_attach_driver+0x20b/0x2f0 drivers/base/dd.c:894 bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:427 __device_attach+0x228/0x4a0 drivers/base/dd.c:965 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:487 device_add+0xc2f/0x2180 drivers/base/core.c:3354 usb_set_configuration+0x113a/0x1910 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0xba/0x100 drivers/usb/core/generic.c:238 usb_probe_device+0xd9/0x2c0 drivers/usb/core/driver.c:293

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: hold io_buffer_list reference over mmap If we look up the kbuf, ensure that it doesn't get unregistered until after we're done with it. Since we're inside mmap, we cannot safely use the io_uring lock. Rely on the fact that we can lookup the buffer list under RCU now and grab a reference to it, preventing it from being unregistered until we're done with it. The lookup returns the io_buffer_list directly with it referenced.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix too early release of tcx_entry Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported an issue that the tcx_entry can be released too early leading to a use after free (UAF) when an active old-style ingress or clsact qdisc with a shared tc block is later replaced by another ingress or clsact instance. Essentially, the sequence to trigger the UAF (one example) can be as follows: 1. A network namespace is created 2. An ingress qdisc is created. This allocates a tcx_entry, and &tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the same time, a tcf block with index 1 is created. 3. chain0 is attached to the tcf block. chain0 must be connected to the block linked to the ingress qdisc to later reach the function tcf_chain0_head_change_cb_del() which triggers the UAF. 4. Create and graft a clsact qdisc. This causes the ingress qdisc created in step 1 to be removed, thus freeing the previously linked tcx_entry: rtnetlink_rcv_msg() => tc_modify_qdisc() => qdisc_create() => clsact_init() [a] => qdisc_graft() => qdisc_destroy() => __qdisc_destroy() => ingress_destroy() [b] => tcx_entry_free() => kfree_rcu() // tcx_entry freed 5. Finally, the network namespace is closed. This registers the cleanup_net worker, and during the process of releasing the remaining clsact qdisc, it accesses the tcx_entry that was already freed in step 4, causing the UAF to occur: cleanup_net() => ops_exit_list() => default_device_exit_batch() => unregister_netdevice_many() => unregister_netdevice_many_notify() => dev_shutdown() => qdisc_put() => clsact_destroy() [c] => tcf_block_put_ext() => tcf_chain0_head_change_cb_del() => tcf_chain_head_change_item() => clsact_chain_head_change() => mini_qdisc_pair_swap() // UAF There are also other variants, the gist is to add an ingress (or clsact) qdisc with a specific shared block, then to replace that qdisc, waiting for the tcx_entry kfree_rcu() to be executed and subsequently accessing the current active qdisc's miniq one way or another. The correct fix is to turn the miniq_active boolean into a counter. What can be observed, at step 2 above, the counter transitions from 0->1, at step [a] from 1->2 (in order for the miniq object to remain active during the replacement), then in [b] from 2->1 and finally [c] 1->0 with the eventual release. The reference counter in general ranges from [0,2] and it does not need to be atomic since all access to the counter is protected by the rtnl mutex. With this in place, there is no longer a UAF happening and the tcx_entry is freed at the correct time.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Do not enable irqs when handling spurious interrups We triggered the following error while running our 4.19 kernel with the pseudo-NMI patches backported to it: [ 14.816231] ------------[ cut here ]------------ [ 14.816231] kernel BUG at irq.c:99! [ 14.816232] Internal error: Oops - BUG: 0 [#1] SMP [ 14.816232] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____)) [ 14.816233] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.19.95.aarch64 #14 [ 14.816233] Hardware name: evb (DT) [ 14.816234] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 14.816234] pc : asm_nmi_enter+0x94/0x98 [ 14.816235] lr : asm_nmi_enter+0x18/0x98 [ 14.816235] sp : ffff000008003c50 [ 14.816235] pmr_save: 00000070 [ 14.816237] x29: ffff000008003c50 x28: ffff0000095f56c0 [ 14.816238] x27: 0000000000000000 x26: ffff000008004000 [ 14.816239] x25: 00000000015e0000 x24: ffff8008fb916000 [ 14.816240] x23: 0000000020400005 x22: ffff0000080817cc [ 14.816241] x21: ffff000008003da0 x20: 0000000000000060 [ 14.816242] x19: 00000000000003ff x18: ffffffffffffffff [ 14.816243] x17: 0000000000000008 x16: 003d090000000000 [ 14.816244] x15: ffff0000095ea6c8 x14: ffff8008fff5ab40 [ 14.816244] x13: ffff8008fff58b9d x12: 0000000000000000 [ 14.816245] x11: ffff000008c8a200 x10: 000000008e31fca5 [ 14.816246] x9 : ffff000008c8a208 x8 : 000000000000000f [ 14.816247] x7 : 0000000000000004 x6 : ffff8008fff58b9e [ 14.816248] x5 : 0000000000000000 x4 : 0000000080000000 [ 14.816249] x3 : 0000000000000000 x2 : 0000000080000000 [ 14.816250] x1 : 0000000000120000 x0 : ffff0000095f56c0 [ 14.816251] Call trace: [ 14.816251] asm_nmi_enter+0x94/0x98 [ 14.816251] el1_irq+0x8c/0x180 (IRQ C) [ 14.816252] gic_handle_irq+0xbc/0x2e4 [ 14.816252] el1_irq+0xcc/0x180 (IRQ B) [ 14.816253] arch_timer_handler_virt+0x38/0x58 [ 14.816253] handle_percpu_devid_irq+0x90/0x240 [ 14.816253] generic_handle_irq+0x34/0x50 [ 14.816254] __handle_domain_irq+0x68/0xc0 [ 14.816254] gic_handle_irq+0xf8/0x2e4 [ 14.816255] el1_irq+0xcc/0x180 (IRQ A) [ 14.816255] arch_cpu_idle+0x34/0x1c8 [ 14.816255] default_idle_call+0x24/0x44 [ 14.816256] do_idle+0x1d0/0x2c8 [ 14.816256] cpu_startup_entry+0x28/0x30 [ 14.816256] rest_init+0xb8/0xc8 [ 14.816257] start_kernel+0x4c8/0x4f4 [ 14.816257] Code: 940587f1 d5384100 b9401001 36a7fd01 (d4210000) [ 14.816258] Modules linked in: start_dp(O) smeth(O) [ 15.103092] ---[ end trace 701753956cb14aa8 ]--- [ 15.103093] Kernel panic - not syncing: Fatal exception in interrupt [ 15.103099] SMP: stopping secondary CPUs [ 15.103100] Kernel Offset: disabled [ 15.103100] CPU features: 0x36,a2400218 [ 15.103100] Memory Limit: none which is cause by a 'BUG_ON(in_nmi())' in nmi_enter(). From the call trace, we can find three interrupts (noted A, B, C above): interrupt (A) is preempted by (B), which is further interrupted by (C). Subsequent investigations show that (B) results in nmi_enter() being called, but that it actually is a spurious interrupt. Furthermore, interrupts are reenabled in the context of (B), and (C) fires with NMI priority. We end-up with a nested NMI situation, something we definitely do not want to (and cannot) handle. The bug here is that spurious interrupts should never result in any state change, and we should just return to the interrupted context. Moving the handling of spurious interrupts as early as possible in the GICv3 handler fixes this issue. [maz: rewrote commit message, corrected Fixes: tag]

In the Linux kernel, the following vulnerability has been resolved: mld: fix panic in mld_newpack() mld_newpack() doesn't allow to allocate high order page, only order-0 allocation is allowed. If headroom size is too large, a kernel panic could occur in skb_put(). Test commands: ip netns del A ip netns del B ip netns add A ip netns add B ip link add veth0 type veth peer name veth1 ip link set veth0 netns A ip link set veth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set veth0 up ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set lo up ip netns exec B ip link set veth1 up ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1 for i in {1..99} do let A=$i-1 ip netns exec A ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100 ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i ip netns exec A ip link set ip6gre$i up ip netns exec B ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100 ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i ip netns exec B ip link set ip6gre$i up done Splat looks like: kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x15d/0x15f Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83 41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20 RSP: 0018:ffff88810091f820 EFLAGS: 00010282 RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000 RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031 R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028 R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0 FS: 0000000000000000(0000) GS:ffff888117c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 skb_put.cold.104+0x22/0x22 ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? rcu_read_lock_sched_held+0x91/0xc0 mld_newpack+0x398/0x8f0 ? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600 ? lock_contended+0xc40/0xc40 add_grhead.isra.33+0x280/0x380 add_grec+0x5ca/0xff0 ? mld_sendpack+0xf40/0xf40 ? lock_downgrade+0x690/0x690 mld_send_initial_cr.part.34+0xb9/0x180 ipv6_mc_dad_complete+0x15d/0x1b0 addrconf_dad_completed+0x8d2/0xbb0 ? lock_downgrade+0x690/0x690 ? addrconf_rs_timer+0x660/0x660 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 Allowing high order page allocation could fix this problem.

In the Linux kernel, the following vulnerability has been resolved: scsi: advansys: Fix kernel pointer leak Pointers should be printed with %p or %px rather than cast to 'unsigned long' and printed with %lx. Change %lx to %p to print the hashed pointer.

In the Linux kernel, the following vulnerability has been resolved: spi: fix use-after-free of the add_lock mutex Commit 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses") introduced a per-controller mutex. But mutex_unlock() of said lock is called after the controller is already freed: spi_unregister_controller(ctlr) -> put_device(&ctlr->dev) -> spi_controller_release(dev) -> mutex_unlock(&ctrl->add_lock) Move the put_device() after the mutex_unlock().

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst null pointer dereference This patch fixes a tunnel_dst null pointer dereference due to lockless access in the tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking. Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked in the egress path.

In the Linux kernel, the following vulnerability has been resolved: ice: track AF_XDP ZC enabled queues in bitmap Commit c7a219048e45 ("ice: Remove xsk_buff_pool from VSI structure") silently introduced a regression and broke the Tx side of AF_XDP in copy mode. xsk_pool on ice_ring is set only based on the existence of the XDP prog on the VSI which in turn picks ice_clean_tx_irq_zc to be executed. That is not something that should happen for copy mode as it should use the regular data path ice_clean_tx_irq. This results in a following splat when xdpsock is run in txonly or l2fwd scenarios in copy mode: <snip> [ 106.050195] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 106.057269] #PF: supervisor read access in kernel mode [ 106.062493] #PF: error_code(0x0000) - not-present page [ 106.067709] PGD 0 P4D 0 [ 106.070293] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 106.074721] CPU: 61 PID: 0 Comm: swapper/61 Not tainted 5.12.0-rc2+ #45 [ 106.081436] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 106.092027] RIP: 0010:xp_raw_get_dma+0x36/0x50 [ 106.096551] Code: 74 14 48 b8 ff ff ff ff ff ff 00 00 48 21 f0 48 c1 ee 30 48 01 c6 48 8b 87 90 00 00 00 48 89 f2 81 e6 ff 0f 00 00 48 c1 ea 0c <48> 8b 04 d0 48 83 e0 fe 48 01 f0 c3 66 66 2e 0f 1f 84 00 00 00 00 [ 106.115588] RSP: 0018:ffffc9000d694e50 EFLAGS: 00010206 [ 106.120893] RAX: 0000000000000000 RBX: ffff88984b8c8a00 RCX: ffff889852581800 [ 106.128137] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff88984cd8b800 [ 106.135383] RBP: ffff888123b50001 R08: ffff889896800000 R09: 0000000000000800 [ 106.142628] R10: 0000000000000000 R11: ffffffff826060c0 R12: 00000000000000ff [ 106.149872] R13: 0000000000000000 R14: 0000000000000040 R15: ffff888123b50018 [ 106.157117] FS: 0000000000000000(0000) GS:ffff8897e0f40000(0000) knlGS:0000000000000000 [ 106.165332] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.171163] CR2: 0000000000000030 CR3: 000000000560a004 CR4: 00000000007706e0 [ 106.178408] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 106.185653] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 106.192898] PKRU: 55555554 [ 106.195653] Call Trace: [ 106.198143] <IRQ> [ 106.200196] ice_clean_tx_irq_zc+0x183/0x2a0 [ice] [ 106.205087] ice_napi_poll+0x3e/0x590 [ice] [ 106.209356] __napi_poll+0x2a/0x160 [ 106.212911] net_rx_action+0xd6/0x200 [ 106.216634] __do_softirq+0xbf/0x29b [ 106.220274] irq_exit_rcu+0x88/0xc0 [ 106.223819] common_interrupt+0x7b/0xa0 [ 106.227719] </IRQ> [ 106.229857] asm_common_interrupt+0x1e/0x40 </snip> Fix this by introducing the bitmap of queues that are zero-copy enabled, where each bit, corresponding to a queue id that xsk pool is being configured on, will be set/cleared within ice_xsk_pool_{en,dis}able and checked within ice_xsk_pool(). The latter is a function used for deciding which napi poll routine is executed. Idea is being taken from our other drivers such as i40e and ixgbe.

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: fix memory leak in nci_allocate_device nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev. Fix this by freeing hci_dev in nci_free_device. BUG: memory leak unreferenced object 0xffff888111ea6800 (size 1024): comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline] [<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline] [<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784 [<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline] [<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132 [<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153 [<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345 [<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554 [<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740 [<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846 [<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431 [<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914 [<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491 [<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109 [<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164 [<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554

In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: bcm-voter: add a missing of_node_put() Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak.

In the Linux kernel, the following vulnerability has been resolved: neighbour: allow NUD_NOARP entries to be forced GCed IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to fill up the neighbour table with enough entries that it will overflow for valid connections after that. This behaviour is more prevalent after commit 58956317c8de ("neighbor: Improve garbage collection") is applied, as it prevents removal from entries that are not NUD_FAILED, unless they are more than 5s old.

In the Linux kernel, the following vulnerability has been resolved: m68k: mvme147,mvme16x: Don't wipe PCC timer config bits Don't clear the timer 1 configuration bits when clearing the interrupt flag and counter overflow. As Michael reported, "This results in no timer interrupts being delivered after the first. Initialization then hangs in calibrate_delay as the jiffies counter is not updated." On mvme16x, enable the timer after requesting the irq, consistent with mvme147.

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix Null-point-dereference in fmt_single_name() Check the return value of devm_kstrdup() in case of Null-point-dereference.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL ptr dereference on VSI filter sync Remove the reason of null pointer dereference in sync VSI filters. Added new I40E_VSI_RELEASING flag to signalize deleting and releasing of VSI resources to sync this thread with sync filters subtask. Without this patch it is possible to start update the VSI filter list after VSI is removed, that's causing a kernel oops.

In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix vm_flags for virtqueue doorbell mapping The virtqueue doorbell is usually implemented via registeres but we don't provide the necessary vma->flags like VM_PFNMAP. This may cause several issues e.g when userspace tries to map the doorbell via vhost IOTLB, kernel may panic due to the page is not backed by page structure. This patch fixes this by setting the necessary vm_flags. With this patch, try to map doorbell via IOTLB will fail with bad address.

In the Linux kernel, the following vulnerability has been resolved: userfaultfd: release page in error path to avoid BUG_ON Consider the following sequence of events: 1. Userspace issues a UFFD ioctl, which ends up calling into shmem_mfill_atomic_pte(). We successfully account the blocks, we shmem_alloc_page(), but then the copy_from_user() fails. We return -ENOENT. We don't release the page we allocated. 2. Our caller detects this error code, tries the copy_from_user() after dropping the mmap_lock, and retries, calling back into shmem_mfill_atomic_pte(). 3. Meanwhile, let's say another process filled up the tmpfs being used. 4. So shmem_mfill_atomic_pte() fails to account blocks this time, and immediately returns - without releasing the page. This triggers a BUG_ON in our caller, which asserts that the page should always be consumed, unless -ENOENT is returned. To fix this, detect if we have such a "dangling" page when accounting fails, and if so, release it before returning.

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Prevent dead task groups from regaining cfs_rq's Kevin is reporting crashes which point to a use-after-free of a cfs_rq in update_blocked_averages(). Initial debugging revealed that we've live cfs_rq's (on_list=1) in an about to be kfree()'d task group in free_fair_sched_group(). However, it was unclear how that can happen. His kernel config happened to lead to a layout of struct sched_entity that put the 'my_q' member directly into the middle of the object which makes it incidentally overlap with SLUB's freelist pointer. That, in combination with SLAB_FREELIST_HARDENED's freelist pointer mangling, leads to a reliable access violation in form of a #GP which made the UAF fail fast. Michal seems to have run into the same issue[1]. He already correctly diagnosed that commit a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") is causing the preconditions for the UAF to happen by re-adding cfs_rq's also to task groups that have no more running tasks, i.e. also to dead ones. His analysis, however, misses the real root cause and it cannot be seen from the crash backtrace only, as the real offender is tg_unthrottle_up() getting called via sched_cfs_period_timer() via the timer interrupt at an inconvenient time. When unregister_fair_sched_group() unlinks all cfs_rq's from the dying task group, it doesn't protect itself from getting interrupted. If the timer interrupt triggers while we iterate over all CPUs or after unregister_fair_sched_group() has finished but prior to unlinking the task group, sched_cfs_period_timer() will execute and walk the list of task groups, trying to unthrottle cfs_rq's, i.e. re-add them to the dying task group. These will later -- in free_fair_sched_group() -- be kfree()'ed while still being linked, leading to the fireworks Kevin and Michal are seeing. To fix this race, ensure the dying task group gets unlinked first. However, simply switching the order of unregistering and unlinking the task group isn't sufficient, as concurrent RCU walkers might still see it, as can be seen below: CPU1: CPU2: : timer IRQ: : do_sched_cfs_period_timer(): : : : distribute_cfs_runtime(): : rcu_read_lock(); : : : unthrottle_cfs_rq(): sched_offline_group(): : : walk_tg_tree_from(…,tg_unthrottle_up,…): list_del_rcu(&tg->list); : (1) : list_for_each_entry_rcu(child, &parent->children, siblings) : : (2) list_del_rcu(&tg->siblings); : : tg_unthrottle_up(): unregister_fair_sched_group(): struct cfs_rq *cfs_rq = tg->cfs_rq[cpu_of(rq)]; : : list_del_leaf_cfs_rq(tg->cfs_rq[cpu]); : : : : if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running) (3) : list_add_leaf_cfs_rq(cfs_rq); : : : : : : : : : ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: Fix a memleak from userdata error path in new objects Release object name if userdata allocation fails.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: clone set element expression template memcpy() breaks when using connlimit in set elements. Use nft_expr_clone() to initialize the connlimit expression list, otherwise connlimit garbage collector crashes when walking on the list head copy. [ 493.064656] Workqueue: events_power_efficient nft_rhash_gc [nf_tables] [ 493.064685] RIP: 0010:find_or_evict+0x5a/0x90 [nf_conncount] [ 493.064694] Code: 2b 43 40 83 f8 01 77 0d 48 c7 c0 f5 ff ff ff 44 39 63 3c 75 df 83 6d 18 01 48 8b 43 08 48 89 de 48 8b 13 48 8b 3d ee 2f 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 03 48 83 [ 493.064699] RSP: 0018:ffffc90000417dc0 EFLAGS: 00010297 [ 493.064704] RAX: 0000000000000000 RBX: ffff888134f38410 RCX: 0000000000000000 [ 493.064708] RDX: 0000000000000000 RSI: ffff888134f38410 RDI: ffff888100060cc0 [ 493.064711] RBP: ffff88812ce594a8 R08: ffff888134f38438 R09: 00000000ebb9025c [ 493.064714] R10: ffffffff8219f838 R11: 0000000000000017 R12: 0000000000000001 [ 493.064718] R13: ffffffff82146740 R14: ffff888134f38410 R15: 0000000000000000 [ 493.064721] FS: 0000000000000000(0000) GS:ffff88840e440000(0000) knlGS:0000000000000000 [ 493.064725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 493.064729] CR2: 0000000000000008 CR3: 00000001330aa002 CR4: 00000000001706e0 [ 493.064733] Call Trace: [ 493.064737] nf_conncount_gc_list+0x8f/0x150 [nf_conncount] [ 493.064746] nft_rhash_gc+0x106/0x390 [nf_tables]

In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - fix result memory leak on error path This patch fixes a memory leak on an error path.

In the Linux kernel, the following vulnerability has been resolved: net: cdc_eem: fix tx fixup skb leak when usbnet transmit a skb, eem fixup it in eem_tx_fixup(), if skb_copy_expand() failed, it return NULL, usbnet_start_xmit() will have no chance to free original skb. fix it by free orginal skb in eem_tx_fixup() first, then check skb clone status, if failed, return NULL to usbnet.

In the Linux kernel, the following vulnerability has been resolved: sctp: use call_rcu to free endpoint This patch is to delay the endpoint free by calling call_rcu() to fix another use-after-free issue in sctp_sock_dump(): BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20 Call Trace: __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] __lock_sock+0x203/0x350 net/core/sock.c:2253 lock_sock_nested+0xfe/0x120 net/core/sock.c:2774 lock_sock include/net/sock.h:1492 [inline] sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324 sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091 sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527 __inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049 inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065 netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170 __sock_diag_cmd net/core/sock_diag.c:232 [inline] sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274 This issue occurs when asoc is peeled off and the old sk is freed after getting it by asoc->base.sk and before calling lock_sock(sk). To prevent the sk free, as a holder of the sk, ep should be alive when calling lock_sock(). This patch uses call_rcu() and moves sock_put and ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to hold the ep under rcu_read_lock in sctp_transport_traverse_process(). If sctp_endpoint_hold() returns true, it means this ep is still alive and we have held it and can continue to dump it; If it returns false, it means this ep is dead and can be freed after rcu_read_unlock, and we should skip it. In sctp_sock_dump(), after locking the sk, if this ep is different from tsp->asoc->ep, it means during this dumping, this asoc was peeled off before calling lock_sock(), and the sk should be skipped; If this ep is the same with tsp->asoc->ep, it means no peeloff happens on this asoc, and due to lock_sock, no peeloff will happen either until release_sock. Note that delaying endpoint free won't delay the port release, as the port release happens in sctp_endpoint_destroy() before calling call_rcu(). Also, freeing endpoint by call_rcu() makes it safe to access the sk by asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv(). Thanks Jones to bring this issue up. v1->v2: - improve the changelog. - add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed.

In the Linux kernel, the following vulnerability has been resolved: Input: appletouch - initialize work before device registration Syzbot has reported warning in __flush_work(). This warning is caused by work->func == NULL, which means missing work initialization. This may happen, since input_dev->close() calls cancel_work_sync(&dev->work), but dev->work initalization happens _after_ input_register_device() call. So this patch moves dev->work initialization before registering input device

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Wrap the tx reporter dump callback to extract the sq Function mlx5e_tx_reporter_dump_sq() casts its void * argument to struct mlx5e_txqsq *, but in TX-timeout-recovery flow the argument is actually of type struct mlx5e_tx_timeout_ctx *. mlx5_core 0000:08:00.1 enp8s0f1: TX timeout detected mlx5_core 0000:08:00.1 enp8s0f1: TX timeout on queue: 1, SQ: 0x11ec, CQ: 0x146d, SQ Cons: 0x0 SQ Prod: 0x1, usecs since last trans: 21565000 BUG: stack guard page was hit at 0000000093f1a2de (stack is 00000000b66ea0dc..000000004d932dae) kernel stack overflow (page fault): 0000 [#1] SMP NOPTI CPU: 5 PID: 95 Comm: kworker/u20:1 Tainted: G W OE 5.13.0_mlnx #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180 [mlx5_core] Call Trace: mlx5e_tx_reporter_dump+0x43/0x1c0 [mlx5_core] devlink_health_do_dump.part.91+0x71/0xd0 devlink_health_report+0x157/0x1b0 mlx5e_reporter_tx_timeout+0xb9/0xf0 [mlx5_core] ? mlx5e_tx_reporter_err_cqe_recover+0x1d0/0x1d0 [mlx5_core] ? mlx5e_health_queue_dump+0xd0/0xd0 [mlx5_core] ? update_load_avg+0x19b/0x550 ? set_next_entity+0x72/0x80 ? pick_next_task_fair+0x227/0x340 ? finish_task_switch+0xa2/0x280 mlx5e_tx_timeout_work+0x83/0xb0 [mlx5_core] process_one_work+0x1de/0x3a0 worker_thread+0x2d/0x3c0 ? process_one_work+0x3a0/0x3a0 kthread+0x115/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 --[ end trace 51ccabea504edaff ]--- RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled end Kernel panic - not syncing: Fatal exception To fix this bug add a wrapper for mlx5e_tx_reporter_dump_sq() which extracts the sq from struct mlx5e_tx_timeout_ctx and set it as the TX-timeout-recovery flow dump callback.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix link down processing to address NULL pointer dereference If an FC link down transition while PLOGIs are outstanding to fabric well known addresses, outstanding ABTS requests may result in a NULL pointer dereference. Driver unload requests may hang with repeated "2878" log messages. The Link down processing results in ABTS requests for outstanding ELS requests. The Abort WQEs are sent for the ELSs before the driver had set the link state to down. Thus the driver is sending the Abort with the expectation that an ABTS will be sent on the wire. The Abort request is stalled waiting for the link to come up. In some conditions the driver may auto-complete the ELSs thus if the link does come up, the Abort completions may reference an invalid structure. Fix by ensuring that Abort set the flag to avoid link traffic if issued due to conditions where the link failed.

In the Linux kernel, the following vulnerability has been resolved: USB: core: Make do_proc_control() and do_proc_bulk() killable The USBDEVFS_CONTROL and USBDEVFS_BULK ioctls invoke usb_start_wait_urb(), which contains an uninterruptible wait with a user-specified timeout value. If timeout value is very large and the device being accessed does not respond in a reasonable amount of time, the kernel will complain about "Task X blocked for more than N seconds", as found in testing by syzbot: INFO: task syz-executor.0:8700 blocked for more than 143 seconds. Not tainted 5.14.0-rc7-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor.0 state:D stack:23192 pid: 8700 ppid: 8455 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4681 [inline] __schedule+0xc07/0x11f0 kernel/sched/core.c:5938 schedule+0x14b/0x210 kernel/sched/core.c:6017 schedule_timeout+0x98/0x2f0 kernel/time/timer.c:1857 do_wait_for_common+0x2da/0x480 kernel/sched/completion.c:85 __wait_for_common kernel/sched/completion.c:106 [inline] wait_for_common kernel/sched/completion.c:117 [inline] wait_for_completion_timeout+0x46/0x60 kernel/sched/completion.c:157 usb_start_wait_urb+0x167/0x550 drivers/usb/core/message.c:63 do_proc_bulk+0x978/0x1080 drivers/usb/core/devio.c:1236 proc_bulk drivers/usb/core/devio.c:1273 [inline] usbdev_do_ioctl drivers/usb/core/devio.c:2547 [inline] usbdev_ioctl+0x3441/0x6b10 drivers/usb/core/devio.c:2713 ... To fix this problem, this patch replaces usbfs's calls to usb_control_msg() and usb_bulk_msg() with special-purpose code that does essentially the same thing (as recommended in the comment for usb_start_wait_urb()), except that it always uses a killable wait and it uses GFP_KERNEL rather than GFP_NOIO.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix an Oopsable condition in __nfs_pageio_add_request() Ensure that nfs_pageio_error_cleanup() resets the mirror array contents, so that the structure reflects the fact that it is now empty. Also change the test in nfs_pageio_do_add_request() to be more robust by checking whether or not the list is empty rather than relying on the value of pg_count.

nf_tables_newset in net/netfilter/nf_tables_api.c in the Linux kernel before 5.12.13 allows local users to cause a denial of service (NULL pointer dereference and general protection fault) because of the missing initialization for nft_set_elem_expr_alloc. A local user can set a netfilter table expression in their own namespace.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear. ffs_data_clear is indirectly called from both ffs_fs_kill_sb and ffs_ep0_release, so it ends up being called twice when userland closes ep0 and then unmounts f_fs. If userland provided an eventfd along with function's USB descriptors, it ends up calling eventfd_ctx_put as many times, causing a refcount underflow. NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls. Also, set epfiles to NULL right after de-allocating it, for readability. For completeness, ffs_data_clear actually ends up being called thrice, the last call being before the whole ffs structure gets freed, so when this specific sequence happens there is a second underflow happening (but not being reported): /sys/kernel/debug/tracing# modprobe usb_f_fs /sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter /sys/kernel/debug/tracing# echo function > current_tracer /sys/kernel/debug/tracing# echo 1 > tracing_on (setup gadget, run and kill function userland process, teardown gadget) /sys/kernel/debug/tracing# echo 0 > tracing_on /sys/kernel/debug/tracing# cat trace smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put Warning output corresponding to above trace: [ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c [ 1946.293094] refcount_t: underflow; use-after-free. [ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E) [ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1 [ 1946.417950] Hardware name: BCM2835 [ 1946.425442] Backtrace: [ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24) [ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c [ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30) [ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154) [ 1946.482067] r5:c04a948c r4:c0a71dc8 [ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4) [ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04 [ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c) [ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0 [ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74) [ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs]) [ 1946.582664] r5:c3b84c00 r4:c2695b00 [ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs]) [ 1946.609608] r5:bf54d014 r4:c2695b00 [ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs]) [ 1946.636217] r7:c0dfcb ---truncated---

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix memory leak on object td Two error return paths are neglecting to free allocated object td, causing a memory leak. Fix this by returning via the error return path that securely kfree's td. Fixes clang scan-build warning: security/keys/trusted-keys/trusted_tpm1.c:496:10: warning: Potential memory leak [unix.Malloc]

In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid WARN_ON timing related checks The soft/batadv interface for a queued OGM can be changed during the time the OGM was queued for transmission and when the OGM is actually transmitted by the worker. But WARN_ON must be used to denote kernel bugs and not to print simple warnings. A warning can simply be printed using pr_warn.

In the Linux kernel, the following vulnerability has been resolved: net: fujitsu: fix potential null-ptr-deref In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer deref. To fix this, check the return value of ioremap and return -1 to the caller in case of failure.

In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix resume from sleep before interface was brought up Since 8ce8c0abcba3 the driver queues work via priv->restart_work when resuming after suspend, even when the interface was not previously enabled. This causes a null dereference error as the workqueue is only allocated and initialized in mcp251x_open(). To fix this we move the workqueue init to mcp251x_can_probe() as there is no reason to do it later and repeat it whenever mcp251x_open() is called. [mkl: fix error handling in mcp251x_stop()]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Free local data after use Fixes the following memory leak in dc_link_construct(): unreferenced object 0xffffa03e81471400 (size 1024): comm "amd_module_load", pid 2486, jiffies 4294946026 (age 10.544s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000000bdf5c4a>] kmem_cache_alloc_trace+0x30a/0x4a0 [<00000000e7c59f0e>] link_create+0xce/0xac0 [amdgpu] [<000000002fb6c072>] dc_create+0x370/0x720 [amdgpu] [<000000000094d1f3>] amdgpu_dm_init+0x18e/0x17a0 [amdgpu] [<00000000bec048fd>] dm_hw_init+0x12/0x20 [amdgpu] [<00000000a2bb7cf6>] amdgpu_device_init+0x1463/0x1e60 [amdgpu] [<0000000032d3bb13>] amdgpu_driver_load_kms+0x5b/0x330 [amdgpu] [<00000000a27834f9>] amdgpu_pci_probe+0x192/0x280 [amdgpu] [<00000000fec7d291>] local_pci_probe+0x47/0xa0 [<0000000055dbbfa7>] pci_device_probe+0xe3/0x180 [<00000000815da970>] really_probe+0x1c4/0x4e0 [<00000000b4b6974b>] driver_probe_device+0x62/0x150 [<000000000f9ecc61>] device_driver_attach+0x58/0x60 [<000000000f65c843>] __driver_attach+0xd6/0x150 [<000000002f5e3683>] bus_for_each_dev+0x6a/0xc0 [<00000000a1cfc897>] driver_attach+0x1e/0x20

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix a resource leak in an error handling path 'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the error handling path of the probe function, as already done in the remove function

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a potential NULL dereference in nfs_get_client() None of the callers are expecting NULL returns from nfs_get_client() so this code will lead to an Oops. It's better to return an error pointer. I expect that this is dead code so hopefully no one is affected.

In the Linux kernel, the following vulnerability has been resolved: usb: musb: tusb6010: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: mm/slub: actually fix freelist pointer vs redzoning It turns out that SLUB redzoning ("slub_debug=Z") checks from s->object_size rather than from s->inuse (which is normally bumped to make room for the freelist pointer), so a cache created with an object size less than 24 would have the freelist pointer written beyond s->object_size, causing the redzone to be corrupted by the freelist pointer. This was very visible with "slub_debug=ZF": BUG test (Tainted: G B ): Right Redzone overwritten ----------------------------------------------------------------------------- INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200 INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620 Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........ Object (____ptrval____): 00 00 00 00 00 f6 f4 a5 ........ Redzone (____ptrval____): 40 1d e8 1a aa @.... Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........ Adjust the offset to stay within s->object_size. (Note that no caches of in this size range are known to exist in the kernel currently.)

In the Linux kernel, the following vulnerability has been resolved: mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page() Hulk Robot reported a panic in put_page_testzero() when testing madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying get_any_page(). This is because we keep MF_COUNT_INCREASED flag in second try but the refcnt is not increased. page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:737! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: release_pages+0x53f/0x840 Call Trace: free_pages_and_swap_cache+0x64/0x80 tlb_flush_mmu+0x6f/0x220 unmap_page_range+0xe6c/0x12c0 unmap_single_vma+0x90/0x170 unmap_vmas+0xc4/0x180 exit_mmap+0xde/0x3a0 mmput+0xa3/0x250 do_exit+0x564/0x1470 do_group_exit+0x3b/0x100 __do_sys_exit_group+0x13/0x20 __x64_sys_exit_group+0x16/0x20 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: ---[ end trace e99579b570fe0649 ]--- RIP: 0010:release_pages+0x53f/0x840

In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: make sure wait for page writeback in memory_failure Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in clear_inode: kernel BUG at fs/inode.c:519! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7) CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_inode+0x280/0x2a8 lr : clear_inode+0x280/0x2a8 Call trace: clear_inode+0x280/0x2a8 ext4_clear_inode+0x38/0xe8 ext4_free_inode+0x130/0xc68 ext4_evict_inode+0xb20/0xcb8 evict+0x1a8/0x3c0 iput+0x344/0x460 do_unlinkat+0x260/0x410 __arm64_sys_unlinkat+0x6c/0xc0 el0_svc_common+0xdc/0x3b0 el0_svc_handler+0xf8/0x160 el0_svc+0x10/0x218 Kernel panic - not syncing: Fatal exception A crash dump of this problem show that someone called __munlock_pagevec to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap -> munlock_vma_pages_range -> __munlock_pagevec. As a result memory_failure will call identify_page_state without wait_on_page_writeback. And after truncate_error_page clear the mapping of this page. end_page_writeback won't call sb_clear_inode_writeback to clear inode->i_wb_list. That will trigger BUG_ON in clear_inode! Fix it by checking PageWriteback too to help determine should we skip wait_on_page_writeback.

In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix memory leak in amd_sfh_work Kmemleak tool detected a memory leak in the amd_sfh driver. ==================== unreferenced object 0xffff88810228ada0 (size 32): comm "insmod", pid 3968, jiffies 4295056001 (age 775.792s) hex dump (first 32 bytes): 00 20 73 1f 81 88 ff ff 00 01 00 00 00 00 ad de . s............. 22 01 00 00 00 00 ad de 01 00 02 00 00 00 00 00 "............... backtrace: [<000000007b4c8799>] kmem_cache_alloc_trace+0x163/0x4f0 [<0000000005326893>] amd_sfh_get_report+0xa4/0x1d0 [amd_sfh] [<000000002a9e5ec4>] amdtp_hid_request+0x62/0x80 [amd_sfh] [<00000000b8a95807>] sensor_hub_get_feature+0x145/0x270 [hid_sensor_hub] [<00000000fda054ee>] hid_sensor_parse_common_attributes+0x215/0x460 [hid_sensor_iio_common] [<0000000021279ecf>] hid_accel_3d_probe+0xff/0x4a0 [hid_sensor_accel_3d] [<00000000915760ce>] platform_probe+0x6a/0xd0 [<0000000060258a1f>] really_probe+0x192/0x620 [<00000000fa812f2d>] driver_probe_device+0x14a/0x1d0 [<000000005e79f7fd>] __device_attach_driver+0xbd/0x110 [<0000000070d15018>] bus_for_each_drv+0xfd/0x160 [<0000000013a3c312>] __device_attach+0x18b/0x220 [<000000008c7b4afc>] device_initial_probe+0x13/0x20 [<00000000e6e99665>] bus_probe_device+0xfe/0x120 [<00000000833fa90b>] device_add+0x6a6/0xe00 [<00000000fa901078>] platform_device_add+0x180/0x380 ==================== The fix is to freeing request_list entry once the processed entry is removed from the request_list.