In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer in skb_segment_list Commit 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.") introduced UDP listifyed GRO. The segmentation relies on frag_list being untouched when passing through the network stack. This assumption can be broken sometimes, where frag_list itself gets pulled into linear area, leaving frag_list being NULL. When this happens it can trigger following NULL pointer dereference, and panic the kernel. Reverse the test condition should fix it. [19185.577801][ C1] BUG: kernel NULL pointer dereference, address: ... [19185.663775][ C1] RIP: 0010:skb_segment_list+0x1cc/0x390 ... [19185.834644][ C1] Call Trace: [19185.841730][ C1] <TASK> [19185.848563][ C1] __udp_gso_segment+0x33e/0x510 [19185.857370][ C1] inet_gso_segment+0x15b/0x3e0 [19185.866059][ C1] skb_mac_gso_segment+0x97/0x110 [19185.874939][ C1] __skb_gso_segment+0xb2/0x160 [19185.883646][ C1] udp_queue_rcv_skb+0xc3/0x1d0 [19185.892319][ C1] udp_unicast_rcv_skb+0x75/0x90 [19185.900979][ C1] ip_protocol_deliver_rcu+0xd2/0x200 [19185.910003][ C1] ip_local_deliver_finish+0x44/0x60 [19185.918757][ C1] __netif_receive_skb_one_core+0x8b/0xa0 [19185.927834][ C1] process_backlog+0x88/0x130 [19185.935840][ C1] __napi_poll+0x27/0x150 [19185.943447][ C1] net_rx_action+0x27e/0x5f0 [19185.951331][ C1] ? mlx5_cq_tasklet_cb+0x70/0x160 [mlx5_core] [19185.960848][ C1] __do_softirq+0xbc/0x25d [19185.968607][ C1] irq_exit_rcu+0x83/0xb0 [19185.976247][ C1] common_interrupt+0x43/0xa0 [19185.984235][ C1] asm_common_interrupt+0x22/0x40 ... [19186.094106][ C1] </TASK>

In the Linux kernel, the following vulnerability has been resolved: mtd: Fix gluebi NULL pointer dereference caused by ftl notifier If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME.

In the Linux kernel, the following vulnerability has been resolved: f2fs: split initial and dynamic conditions for extent_cache Let's allocate the extent_cache tree without dynamic conditions to avoid a missing condition causing a panic as below. # create a file w/ a compressed flag # disable the compression # panic while updating extent_cache F2FS-fs (dm-64): Swapfile: last extent is not aligned to section F2FS-fs (dm-64): Swapfile (3) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * N) Adding 124996k swap on ./swap-file. Priority:0 extents:2 across:17179494468k ================================================================== BUG: KASAN: null-ptr-deref in instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] BUG: KASAN: null-ptr-deref in atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] BUG: KASAN: null-ptr-deref in queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] BUG: KASAN: null-ptr-deref in __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] BUG: KASAN: null-ptr-deref in _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 Write of size 4 at addr 0000000000000030 by task syz-executor154/3327 CPU: 0 PID: 3327 Comm: syz-executor154 Tainted: G O 5.10.185 #1 Hardware name: emulation qemu-x86/qemu-x86, BIOS 2023.01-21885-gb3cc1cd24d 01/01/2023 Call Trace: __dump_stack out/common/lib/dump_stack.c:77 [inline] dump_stack_lvl+0x17e/0x1c4 out/common/lib/dump_stack.c:118 __kasan_report+0x16c/0x260 out/common/mm/kasan/report.c:415 kasan_report+0x51/0x70 out/common/mm/kasan/report.c:428 kasan_check_range+0x2f3/0x340 out/common/mm/kasan/generic.c:186 __kasan_check_write+0x14/0x20 out/common/mm/kasan/shadow.c:37 instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 __drop_extent_tree+0xdf/0x2f0 out/common/fs/f2fs/extent_cache.c:1155 f2fs_drop_extent_tree+0x17/0x30 out/common/fs/f2fs/extent_cache.c:1172 f2fs_insert_range out/common/fs/f2fs/file.c:1600 [inline] f2fs_fallocate+0x19fd/0x1f40 out/common/fs/f2fs/file.c:1764 vfs_fallocate+0x514/0x9b0 out/common/fs/open.c:310 ksys_fallocate out/common/fs/open.c:333 [inline] __do_sys_fallocate out/common/fs/open.c:341 [inline] __se_sys_fallocate out/common/fs/open.c:339 [inline] __x64_sys_fallocate+0xb8/0x100 out/common/fs/open.c:339 do_syscall_64+0x35/0x50 out/common/arch/x86/entry/common.c:46

A vulnerability was found in RefindPlusRepo RefindPlus 0.14.2.AB and classified as problematic. Affected by this issue is the function GetDebugLogFile of the file Library/MemLogLib/BootLog.c. The manipulation leads to null pointer dereference. Attacking locally is a requirement. The patch is identified as d2143a1e2deefddd9b105fb7160763c4f8d47ea2. It is recommended to apply a patch to fix this issue.

A vulnerability was found in RefindPlusRepo RefindPlus 0.14.2.AB. It has been classified as problematic. This affects the function InternalApfsTranslateBlock of the file Library/RP_ApfsLib/RP_ApfsIo.c. The manipulation leads to null pointer dereference. It is possible to launch the attack on the local host. The patch is named 4d35125ca689a255647e9033dd60c257d26df7cb. It is recommended to apply a patch to fix this issue.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where a NULL pointer dereference may lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: net: fec: handle page_pool_dev_alloc_pages error The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet.

In the Linux kernel, the following vulnerability has been resolved: usb: musb: dsps: Fix the probe error path Commit 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") has inverted the calls to dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev() without updating correctly the error path. dsps_create_musb_pdev() allocates and registers a new platform device which must be unregistered and freed with platform_device_unregister(), and this is missing upon dsps_setup_optional_vbus_irq() error. While on the master branch it seems not to trigger any issue, I observed a kernel crash because of a NULL pointer dereference with a v5.10.70 stable kernel where the patch mentioned above was backported. With this kernel version, -EPROBE_DEFER is returned the first time dsps_setup_optional_vbus_irq() is called which triggers the probe to error out without unregistering the platform device. Unfortunately, on the Beagle Bone Black Wireless, the platform device still living in the system is being used by the USB Ethernet gadget driver, which during the boot phase triggers the crash. My limited knowledge of the musb world prevents me to revert this commit which was sent to silence a robot warning which, as far as I understand, does not make sense. The goal of this patch was to prevent an IRQ to fire before the platform device being registered. I think this cannot ever happen due to the fact that enabling the interrupts is done by the ->enable() callback of the platform musb device, and this platform device must be already registered in order for the core or any other user to use this callback. Hence, I decided to fix the error path, which might prevent future errors on mainline kernels while also fixing older ones.

In the Linux kernel, the following vulnerability has been resolved: ice: fix vsi->txq_map sizing The approach of having XDP queue per CPU regardless of user's setting exposed a hidden bug that could occur in case when Rx queue count differ from Tx queue count. Currently vsi->txq_map's size is equal to the doubled vsi->alloc_txq, which is not correct due to the fact that XDP rings were previously based on the Rx queue count. Below splat can be seen when ethtool -L is used and XDP rings are configured: [ 682.875339] BUG: kernel NULL pointer dereference, address: 000000000000000f [ 682.883403] #PF: supervisor read access in kernel mode [ 682.889345] #PF: error_code(0x0000) - not-present page [ 682.895289] PGD 0 P4D 0 [ 682.898218] Oops: 0000 [#1] PREEMPT SMP PTI [ 682.903055] CPU: 42 PID: 2878 Comm: ethtool Tainted: G OE 5.15.0-rc5+ #1 [ 682.912214] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 682.923380] RIP: 0010:devres_remove+0x44/0x130 [ 682.928527] Code: 49 89 f4 55 48 89 fd 4c 89 ff 53 48 83 ec 10 e8 92 b9 49 00 48 8b 9d a8 02 00 00 48 8d 8d a0 02 00 00 49 89 c2 48 39 cb 74 0f <4c> 3b 63 10 74 25 48 8b 5b 08 48 39 cb 75 f1 4c 89 ff 4c 89 d6 e8 [ 682.950237] RSP: 0018:ffffc90006a679f0 EFLAGS: 00010002 [ 682.956285] RAX: 0000000000000286 RBX: ffffffffffffffff RCX: ffff88908343a370 [ 682.964538] RDX: 0000000000000001 RSI: ffffffff81690d60 RDI: 0000000000000000 [ 682.972789] RBP: ffff88908343a0d0 R08: 0000000000000000 R09: 0000000000000000 [ 682.981040] R10: 0000000000000286 R11: 3fffffffffffffff R12: ffffffff81690d60 [ 682.989282] R13: ffffffff81690a00 R14: ffff8890819807a8 R15: ffff88908343a36c [ 682.997535] FS: 00007f08c7bfa740(0000) GS:ffff88a03fd00000(0000) knlGS:0000000000000000 [ 683.006910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 683.013557] CR2: 000000000000000f CR3: 0000001080a66003 CR4: 00000000003706e0 [ 683.021819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 683.030075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 683.038336] Call Trace: [ 683.041167] devm_kfree+0x33/0x50 [ 683.045004] ice_vsi_free_arrays+0x5e/0xc0 [ice] [ 683.050380] ice_vsi_rebuild+0x4c8/0x750 [ice] [ 683.055543] ice_vsi_recfg_qs+0x9a/0x110 [ice] [ 683.060697] ice_set_channels+0x14f/0x290 [ice] [ 683.065962] ethnl_set_channels+0x333/0x3f0 [ 683.070807] genl_family_rcv_msg_doit+0xea/0x150 [ 683.076152] genl_rcv_msg+0xde/0x1d0 [ 683.080289] ? channels_prepare_data+0x60/0x60 [ 683.085432] ? genl_get_cmd+0xd0/0xd0 [ 683.089667] netlink_rcv_skb+0x50/0xf0 [ 683.094006] genl_rcv+0x24/0x40 [ 683.097638] netlink_unicast+0x239/0x340 [ 683.102177] netlink_sendmsg+0x22e/0x470 [ 683.106717] sock_sendmsg+0x5e/0x60 [ 683.110756] __sys_sendto+0xee/0x150 [ 683.114894] ? handle_mm_fault+0xd0/0x2a0 [ 683.119535] ? do_user_addr_fault+0x1f3/0x690 [ 683.134173] __x64_sys_sendto+0x25/0x30 [ 683.148231] do_syscall_64+0x3b/0xc0 [ 683.161992] entry_SYSCALL_64_after_hwframe+0x44/0xae Fix this by taking into account the value that num_possible_cpus() yields in addition to vsi->alloc_txq instead of doubling the latter.

In MidnightBSD before 1.2.6 and 1.3 before August 2020, and FreeBSD before 7, a NULL pointer dereference was found in the Linux emulation layer that allows attackers to crash the running kernel. During binary interaction, td->td_emuldata in sys/compat/linux/linux_emul.h is not getting initialized and returns NULL from em_find().

In the Linux kernel, the following vulnerability has been resolved: sfc: fix NULL dereferences in ef100_process_design_param() Since cited commit, ef100_probe_main() and hence also ef100_check_design_params() run before efx->net_dev is created; consequently, we cannot netif_set_tso_max_size() or _segs() at this point. Move those netif calls to ef100_probe_netdev(), and also replace netif_err within the design params code with pci_err.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix tc flower deletion for VLAN priority Rx steering To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue.

A null pointer dereference issue was found in the sctp network protocol in net/sctp/stream_sched.c in Linux Kernel. If stream_in allocation is failed, stream_out is freed which would further be accessed. A local user could use this flaw to crash the system or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: x86/resctrl: Fix allocation of cleanest CLOSID on platforms with no monitors Commit 6eac36bb9eb0 ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid") added logic that causes resctrl to search for the CLOSID with the fewest dirty cache lines when creating a new control group, if requested by the arch code. This depends on the values read from the llc_occupancy counters. The logic is applicable to architectures where the CLOSID effectively forms part of the monitoring identifier and so do not allow complete freedom to choose an unused monitoring identifier for a given CLOSID. This support missed that some platforms may not have these counters. This causes a NULL pointer dereference when creating a new control group as the array was not allocated by dom_data_init(). As this feature isn't necessary on platforms that don't have cache occupancy monitors, add this to the check that occurs when a new control group is allocated.

QEMU (aka Quick Emulator), when built with MegaRAID SAS 8708EM2 Host Bus Adapter emulation support, allows local guest OS privileged users to cause a denial of service (NULL pointer dereference and QEMU process crash) via vectors involving megasas command processing.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fixed integer types and null check locations [why]: issues fixed: - comparison with wider integer type in loop condition which can cause infinite loops - pointer dereference before null check

In the Linux kernel, the following vulnerability has been resolved: driver core: fix potential NULL pointer dereference in dev_uevent() If userspace reads "uevent" device attribute at the same time as another threads unbinds the device from its driver, change to dev->driver from a valid pointer to NULL may result in crash. Fix this by using READ_ONCE() when fetching the pointer, and take bus' drivers klist lock to make sure driver instance will not disappear while we access it. Use WRITE_ONCE() when setting the driver pointer to ensure there is no tearing.

A NULL pointer dereference flaw was found in rawv6_push_pending_frames in net/ipv6/raw.c in the network subcomponent in the Linux kernel. This flaw causes the system to crash.

TensorFlow is an open source platform for machine learning. In affected versions the process of building the control flow graph for a TensorFlow model is vulnerable to a null pointer exception when nodes that should be paired are not. This occurs because the code assumes that the first node in the pairing (e.g., an `Enter` node) always exists when encountering the second node (e.g., an `Exit` node). When this is not the case, `parent` is `nullptr` so dereferencing it causes a crash. The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, TensorFlow 2.5.2, and TensorFlow 2.4.4, as these are also affected and still in supported range.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-imx: Add check for spi_imx_setupxfer() Add check for the return value of spi_imx_setupxfer(). spi_imx->rx and spi_imx->tx function pointer can be NULL when spi_imx_setupxfer() return error, and make NULL pointer dereference. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: 0x0 spi_imx_pio_transfer+0x50/0xd8 spi_imx_transfer_one+0x18c/0x858 spi_transfer_one_message+0x43c/0x790 __spi_pump_transfer_message+0x238/0x5d4 __spi_sync+0x2b0/0x454 spi_write_then_read+0x11c/0x200

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-combo: fix NULL-deref on runtime resume Commit fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") started treating the PCS_USB registers as potentially separate from the PCS registers but used the wrong base when no PCS_USB offset has been provided. Fix the PCS_USB base used at runtime resume to prevent dereferencing a NULL pointer on platforms that do not provide a PCS_USB offset (e.g. SC7180).

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() pdesc could be null but still dereference pdesc->name and it will lead to a null pointer access. So we move a null check before dereference.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Address NULL pointer dereference after starget_to_rport() Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference.

In the Linux kernel, the following vulnerability has been resolved: reset: uniphier-glue: Fix possible null-ptr-deref It will cause null-ptr-deref when resource_size(res) invoked, if platform_get_resource() returns NULL.

In the Linux kernel, the following vulnerability has been resolved: drm/panel: ili9341: fix optional regulator handling If the optional regulator lookup fails, reset the pointer to NULL. Other functions such as mipi_dbi_poweron_reset_conditional() only do a NULL pointer check and will otherwise dereference the error pointer.

In the Linux kernel, the following vulnerability has been resolved: vduse: Fix NULL pointer dereference on sysfs access The control device has no drvdata. So we will get a NULL pointer dereference when accessing control device's msg_timeout attribute via sysfs: [ 132.841881][ T3644] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [ 132.850619][ T3644] RIP: 0010:msg_timeout_show (drivers/vdpa/vdpa_user/vduse_dev.c:1271) [ 132.869447][ T3644] dev_attr_show (drivers/base/core.c:2094) [ 132.870215][ T3644] sysfs_kf_seq_show (fs/sysfs/file.c:59) [ 132.871164][ T3644] ? device_remove_bin_file (drivers/base/core.c:2088) [ 132.872082][ T3644] kernfs_seq_show (fs/kernfs/file.c:164) [ 132.872838][ T3644] seq_read_iter (fs/seq_file.c:230) [ 132.873578][ T3644] ? __vmalloc_area_node (mm/vmalloc.c:3041) [ 132.874532][ T3644] kernfs_fop_read_iter (fs/kernfs/file.c:238) [ 132.875513][ T3644] __kernel_read (fs/read_write.c:440 (discriminator 1)) [ 132.876319][ T3644] kernel_read (fs/read_write.c:459) [ 132.877129][ T3644] kernel_read_file (fs/kernel_read_file.c:94) [ 132.877978][ T3644] kernel_read_file_from_fd (include/linux/file.h:45 fs/kernel_read_file.c:186) [ 132.879019][ T3644] __do_sys_finit_module (kernel/module.c:4207) [ 132.879930][ T3644] __ia32_sys_finit_module (kernel/module.c:4189) [ 132.880930][ T3644] do_int80_syscall_32 (arch/x86/entry/common.c:112 arch/x86/entry/common.c:132) [ 132.881847][ T3644] entry_INT80_compat (arch/x86/entry/entry_64_compat.S:419) To fix it, don't create the unneeded attribute for control device anymore.

In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: vop: fix possible null-ptr-deref in vop_bind() It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: drm/omap: fix NULL but dereferenced coccicheck error Fix the following coccicheck warning: ./drivers/gpu/drm/omapdrm/omap_overlay.c:89:22-25: ERROR: r_ovl is NULL but dereferenced. Here should be ovl->idx rather than r_ovl->idx.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram() ./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced.

In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rx_register() It causes NULL pointer dereference when testing as following: (a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket. (b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device). (c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket. (d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket. The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue. The following is the stack information: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: i2c: dev: check return value when calling dev_set_name() If dev_set_name() fails, the dev_name() is null, check the return value of dev_set_name() to avoid the null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_arm: Avoid NULL ptr deref in vchiq_dump_platform_instances vchiq_get_state() can return a NULL pointer. So handle this cases and avoid a NULL pointer derefence in vchiq_dump_platform_instances.

In the Linux kernel, the following vulnerability has been resolved: phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe() sp_usb_phy_probe() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo() In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: net: phy: micrel: Allow probing without .driver_data Currently, if the .probe element is present in the phy_driver structure and the .driver_data is not, a NULL pointer dereference happens. Allow passing .probe without .driver_data by inserting NULL checks for priv->type.

In the Linux kernel, the following vulnerability has been resolved: hwrng: cavium - fix NULL but dereferenced coccicheck error Fix following coccicheck warning: ./drivers/char/hw_random/cavium-rng-vf.c:182:17-20: ERROR: pdev is NULL but dereferenced.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link When using a fixed-link, the altr_tse_pcs driver crashes due to null-pointer dereference as no phy_device is provided to tse_pcs_fix_mac_speed function. Fix this by adding a check for phy_dev before calling the tse_pcs_fix_mac_speed() function. Also clean up the tse_pcs_fix_mac_speed function a bit. There is no need to check for splitter_base and sgmii_adapter_base because the driver will fail if these 2 variables are not derived from the device tree.

In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: avoid null dereference in deinit If venus_probe fails at pm_runtime_put_sync the error handling first calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets core->ops to NULL, hfi_core_deinit cannot call the core_deinit function anymore. Avoid this null pointer derefence by skipping the call when necessary.

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Correctly move list in sc_disable() Commit 13bac861952a ("IB/hfi1: Fix abba locking issue with sc_disable()") incorrectly tries to move a list from one list head to another. The result is a kernel crash. The crash is triggered when a link goes down and there are waiters for a send to complete. The following signature is seen: BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] Call Trace: sc_disable+0x1ba/0x240 [hfi1] pio_freeze+0x3d/0x60 [hfi1] handle_freeze+0x27/0x1b0 [hfi1] process_one_work+0x1b0/0x380 ? process_one_work+0x380/0x380 worker_thread+0x30/0x360 ? process_one_work+0x380/0x380 kthread+0xd7/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 The fix is to use the correct call to move the list.

In the Linux kernel before 6.5.9, there is a NULL pointer dereference in send_acknowledge in net/nfc/nci/spi.c.

In the Linux kernel, the following vulnerability has been resolved: soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc The allocation funciton devm_kcalloc may fail and return a null pointer, which would cause a null-pointer dereference later. It might be better to check it and directly return -ENOMEM just like the usage of devm_kcalloc in previous code.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereferences without iommu Check if 'aspace' is set before using it as it will stay null without IOMMU, such as on msm8974.

In the Linux kernel, the following vulnerability has been resolved: tipc: move bc link creation back to tipc_node_create Shuang Li reported a NULL pointer dereference crash: [] BUG: kernel NULL pointer dereference, address: 0000000000000068 [] RIP: 0010:tipc_link_is_up+0x5/0x10 [tipc] [] Call Trace: [] <IRQ> [] tipc_bcast_rcv+0xa2/0x190 [tipc] [] tipc_node_bc_rcv+0x8b/0x200 [tipc] [] tipc_rcv+0x3af/0x5b0 [tipc] [] tipc_udp_recv+0xc7/0x1e0 [tipc] It was caused by the 'l' passed into tipc_bcast_rcv() is NULL. When it creates a node in tipc_node_check_dest(), after inserting the new node into hashtable in tipc_node_create(), it creates the bc link. However, there is a gap between this insert and bc link creation, a bc packet may come in and get the node from the hashtable then try to dereference its bc link, which is NULL. This patch is to fix it by moving the bc link creation before inserting into the hashtable. Note that for a preliminary node becoming "real", the bc link creation should also be called before it's rehashed, as we don't create it for preliminary nodes.

An issue in MiniZinc before 2.8.0 allows a NULL pointer dereference via ti_expr in a crafted .mzn file. NOTE: this is disputed because there is no common libminizinc use case in which an unattended process is supposed to run forever to process a series of atttacker-controlled .mzn files.

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_transport_sas: Fix error handling in sas_phy_add() If transport_add_device() fails in sas_phy_add(), the kernel will crash trying to delete the device in transport_remove_device() called from sas_remove_host(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 61 PID: 42829 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc1+ #173 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_phy_delete+0x30/0x60 [scsi_transport_sas] do_sas_phy_delete+0x6c/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x40/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] hisi_sas_remove+0x40/0x68 [hisi_sas_main] hisi_sas_v2_remove+0x20/0x30 [hisi_sas_v2_hw] platform_remove+0x2c/0x60 Fix this by checking and handling return value of transport_add_device() in sas_phy_add().

In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix NULL pointer dereference in dsa_port_reset_vlan_filtering The "ds" iterator variable used in dsa_port_reset_vlan_filtering() -> dsa_switch_for_each_port() overwrites the "dp" received as argument, which is later used to call dsa_port_vlan_filtering() proper. As a result, switches which do enter that code path (the ones with vlan_filtering_is_global=true) will dereference an invalid dp in dsa_port_reset_vlan_filtering() after leaving a VLAN-aware bridge. Use a dedicated "other_dp" iterator variable to avoid this from happening.

In the Linux kernel, the following vulnerability has been resolved: tty: synclink_gt: Fix null-pointer-dereference in slgt_clean() When the driver fails at alloc_hdlcdev(), and then we remove the driver module, we will get the following splat: [ 25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI [ 25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17] [ 25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0 [ 25.077709] Call Trace: [ 25.077924] <TASK> [ 25.078108] unregister_hdlc_device+0x16/0x30 [ 25.078481] slgt_cleanup+0x157/0x9f0 [synclink_gt] Fix this by checking whether the 'info->netdev' is a null pointer first.

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Store vhost pointer during subcrq allocation Currently the back pointer from a queue to the vhost adapter isn't set until after subcrq interrupt registration. The value is available when a queue is first allocated and can/should be also set for primary and async queues as well as subcrqs. This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS interrupt controller where a pending subcrq interrupt from the previous kernel can be replayed immediately upon IRQ registration resulting in dereference of a garbage backpointer in ibmvfc_interrupt_scsi(). Kernel attempted to read user page (58) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000058 Faulting instruction address: 0xc008000003216a08 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc] LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 Call Trace: [c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable) [c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 [c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188 [c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310 [c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80 [c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0 [c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130 [c000000014622f60] [0000000020000000] 0x20000000 [c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0 [c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0 [c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170 [c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0 [c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0 [c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230 [c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc] [c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc] [c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc] [c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc] [c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc]

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit() When device is running and the interface status is changed, the gpf issue is triggered. The problem triggering process is as follows: Thread A: Thread B ieee80211_runtime_change_iftype() process_one_work() ... ... ieee80211_do_stop() ... ... ... sdata->bss = NULL ... ... ieee80211_subif_start_xmit() ieee80211_multicast_to_unicast //!sdata->bss->multicast_to_unicast cause gpf issue When the interface status is changed, the sending queue continues to send packets. After the bss is set to NULL, the bss is accessed. As a result, this causes a general-protection-fault issue. The following is the stack information: general protection fault, probably for non-canonical address 0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f] Workqueue: mld mld_ifc_work RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310 Call Trace: <TASK> dev_hard_start_xmit+0x1be/0x990 __dev_queue_xmit+0x2c9a/0x3b60 ip6_finish_output2+0xf92/0x1520 ip6_finish_output+0x6af/0x11e0 ip6_output+0x1ed/0x540 mld_sendpack+0xa09/0xe70 mld_ifc_work+0x71c/0xdb0 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK>