GStreamer is a library for constructing graphs of media-handling components. An out-of-bounds write vulnerability was identified in the convert_to_s334_1a function in isomp4/qtdemux.c. The vulnerability arises due to a discrepancy between the size of memory allocated to the storage array and the loop condition i * 2 < ccpair_size. Specifically, when ccpair_size is even, the allocated size in storage does not match the loop's expected bounds, resulting in an out-of-bounds write. This bug allows for the overwriting of up to 3 bytes beyond the allocated bounds of the storage array. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been identified in `gst_gdk_pixbuf_dec_flush` within `gstgdkpixbufdec.c`. This function invokes `memcpy`, using `out_pix` as the destination address. `out_pix` is expected to point to the frame 0 from the frame structure, which is read from the input file. However, in certain situations, it can points to a NULL frame, causing the subsequent call to `memcpy` to attempt writing to the null address (0x00), leading to a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. The program attempts to reallocate the memory pointed to by stream->samples to accommodate stream->n_samples + samples_count elements of type QtDemuxSample. The problem is that samples_count is read from the input file. And if this value is big enough, this can lead to an integer overflow during the addition. As a consequence, g_try_renew might allocate memory for a significantly smaller number of elements than intended. Following this, the program iterates through samples_count elements and attempts to write samples_count number of elements, potentially exceeding the actual allocated memory size and causing an OOB-write. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. A stack-buffer overflow has been detected in the `vorbis_handle_identification_packet` function within `gstvorbisdec.c`. The position array is a stack-allocated buffer of size 64. If vd->vi.channels exceeds 64, the for loop will write beyond the boundaries of the position array. The value written will always be `GST_AUDIO_CHANNEL_POSITION_NONE`. This vulnerability allows someone to overwrite the EIP address allocated in the stack. Additionally, this bug can overwrite the `GstAudioInfo` info structure. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. stack-buffer overflow has been detected in the gst_opus_dec_parse_header function within `gstopusdec.c'. The pos array is a stack-allocated buffer of size 64. If n_channels exceeds 64, the for loop will write beyond the boundaries of the pos array. The value written will always be GST_AUDIO_CHANNEL_POSITION_NONE. This bug allows to overwrite the EIP address allocated in the stack. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An uninitialized stack variable vulnerability has been identified in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. When size < 4, the program calls gst_buffer_unmap with an uninitialized map variable. Then, in the gst_memory_unmap function, the program will attempt to unmap the buffer using the uninitialized map variable, causing a function pointer hijack, as it will jump to mem->allocator->mem_unmap_full or mem->allocator->mem_unmap. This vulnerability could allow an attacker to hijack the execution flow, potentially leading to code execution. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An integer underflow has been detected in the function qtdemux_parse_theora_extension within qtdemux.c. The vulnerability occurs due to an underflow of the gint size variable, which causes size to hold a large unintended value when cast to an unsigned integer. This 32-bit negative value is then cast to a 64-bit unsigned integer (0xfffffffffffffffa) in a subsequent call to gst_buffer_new_and_alloc. The function gst_buffer_new_allocate then attempts to allocate memory, eventually calling _sysmem_new_block. The function _sysmem_new_block adds alignment and header size to the (unsigned) size, causing the overflow of the 'slice_size' variable. As a result, only 0x89 bytes are allocated, despite the large input size. When the following memcpy call occurs in gst_buffer_fill, the data from the input file will overwrite the content of the GstMapInfo info structure. Finally, during the call to gst_memory_unmap, the overwritten memory may cause a function pointer hijack, as the mem->allocator->mem_unmap_full function is called with a corrupted pointer. This function pointer overwrite could allow an attacker to alter the execution flow of the program, leading to arbitrary code execution. This vulnerability is fixed in 1.24.10.

GStreamer is a library for constructing graphs of media-handling components. An OOB-write vulnerability has been identified in the gst_ssa_parse_remove_override_codes function of the gstssaparse.c file. This function is responsible for parsing and removing SSA (SubStation Alpha) style override codes, which are enclosed in curly brackets ({}). The issue arises when a closing curly bracket "}" appears before an opening curly bracket "{" in the input string. In this case, memmove() incorrectly duplicates a substring. With each successive loop iteration, the size passed to memmove() becomes progressively larger (strlen(end+1)), leading to a write beyond the allocated memory bounds. This vulnerability is fixed in 1.24.10.

DOS / potential heap overwrite in qtdemux using zlib decompression. Integer overflow in qtdemux element in qtdemux_inflate function which causes a segfault, or could cause a heap overwrite, depending on libc and OS. Depending on the libc used, and the underlying OS capabilities, it could be just a segfault or a heap overwrite.

GStreamer AV1 Video Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of tile list data within AV1-encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22873.

GStreamer H266 Codec Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of H266 sei messages. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27381.

GStreamer before 1.16.0 has a heap-based buffer overflow in the RTSP connection parser via a crafted response from a server, potentially allowing remote code execution.

Stack-based buffer overflow vulnerability exists in orcparse.c of ORC versions prior to 0.4.39. If a developer is tricked to process a specially crafted file with the affected ORC compiler, an arbitrary code may be executed on the developer's build environment. This may lead to compromise of developer machines or CI build environments.

Integer overflow in matroskademux element in gst_matroska_demux_add_wvpk_header function which allows a heap overwrite while parsing matroska files. Potential for arbitrary code execution through heap overwrite.

GStreamer before 1.18.4 might cause heap corruption when parsing certain malformed Matroska files.

The html_context_handle_element function in gst/subparse/samiparse.c in gst-plugins-base in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (out-of-bounds write) via a crafted SMI file, as demonstrated by OneNote_Manager.smi.

GStreamer H265 Codec Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of H265 slice headers. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-26596.

GStreamer AV1 Video Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of metadata within AV1 encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22300.

GStreamer AV1 Codec Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of AV1 encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22226.

The FLIC decoder in GStreamer before 1.10.2 allows remote attackers to cause a denial of service (out-of-bounds write and crash) via a crafted series of skip and count pairs.

The ROM mappings in the NSF decoder in gstreamer 0.10.x allow remote attackers to cause a denial of service (out-of-bounds read or write) and possibly execute arbitrary code via a crafted NSF music file.

GStreamer SRT File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of SRT subtitle files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20968.

TOTOLINK N600R V4.3.0cu.7647_B20210106 was discovered to contain a stack overflow via the File parameter in the function FUN_0041309c.

Memory safety bugs present in Firefox 129. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 130.

A vulnerability was found in Tenda O6 1.0.0.7(2054). It has been declared as critical. This vulnerability affects the function frommacFilterModify of the file /goform/operateMacFilter. The manipulation of the argument mac leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Onlyoffice Document Server v6.0.0 and below and Core 6.1.0.26 and below were discovered to contain a stack overflow via the component DesktopEditor/common/File.cpp.

A vulnerability was found in Tenda O6 1.0.0.7(2054). It has been rated as critical. This issue affects the function fromSafeSetMacFilter of the file /goform/setMacFilterList. The manipulation of the argument remark/type/time leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Tenda AC5 US_AC5V1.0RTL_V15.03.06.28 was discovered to contain a stack overflow via the check_param_changed function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

A vulnerability has been found in Tenda O1 1.0.0.7(10648) and classified as critical. Affected by this vulnerability is the function formSetCfm of the file /goform/setcfm. The manipulation of the argument funcpara1 leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

In PHP versions 8.1.* before 8.1.31, 8.2.* before 8.2.26, 8.3.* before 8.3.14, uncontrolled long string inputs to ldap_escape() function on 32-bit systems can cause an integer overflow, resulting in an out-of-bounds write.

A vulnerability, which was classified as critical, was found in Tenda G3 15.11.0.20. Affected is the function formSetSysTime of the file /goform/SetSysTimeCfg. The manipulation of the argument sysTimePolicy leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Tenda AC8V4.0-V16.03.34.06 was discovered to contain a stack overflow via the timeZone parameter in the sub_44db3c function.

Secure Email Gateway from Cellopoint has Buffer Overflow Vulnerability in authentication process. Remote unauthenticated attackers can send crafted packets to crash the process, thereby bypassing authentication and obtaining system administrator privileges.

A vulnerability, which was classified as critical, has been found in Tenda G3 15.11.0.20. This issue affects the function formSetDebugCfg of the file /goform/setDebugCfg. The manipulation of the argument enable/level/module leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Exim 4.92 through 4.92.2 allows remote code execution, a different vulnerability than CVE-2019-15846. There is a heap-based buffer overflow in string_vformat in string.c involving a long EHLO command.

Command injection and multiple stack-based buffer overflows vulnerabilities in the modifyUserb_func function of spx_restservice allow an authenticated attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

sprintf in the GNU C Library (glibc) 2.37 has a buffer overflow (out-of-bounds write) in some situations with a correct buffer size. This is unrelated to CWE-676. It may write beyond the bounds of the destination buffer when attempting to write a padded, thousands-separated string representation of a number, if the buffer is allocated the exact size required to represent that number as a string. For example, 1,234,567 (with padding to 13) overflows by two bytes.

A vulnerability, which was classified as critical, has been found in Tenda i22 1.0.0.3(4687). This issue affects the function formApPortalOneKeyAuth of the file /goform/apPortalOneKeyAuth. The manipulation of the argument data leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Command injection and multiple stack-based buffer overflows vulnerabilities in the Login_handler_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

A vulnerability classified as critical has been found in Tenda A301 15.13.08.12. This affects the function formWifiBasicSet of the file /goform/WifiBasicSet. The manipulation of the argument security leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda FH1206 1.2.0.8(8155) and classified as critical. This issue affects the function fromGstDhcpSetSer of the file /goform/GstDhcpSetSer. The manipulation of the argument dips leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

D-Link DSL-320B-D1 devices through EU_1.25 are prone to multiple Stack-Based Buffer Overflows that allow unauthenticated remote attackers to take over a device via the login.xgi user and pass parameters. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Multiple command injections and stack-based buffer overflows vulnerabilities in the SubNet_handler_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

A stack-based buffer overflow vulnerability in a subfunction of the Login_handler_func function of spx_restservice allows an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

A vulnerability classified as critical was found in Tenda i22 1.0.0.3(4687). This vulnerability affects the function formApPortalAccessCodeAuth of the file /goform/apPortalAccessCodeAuth. The manipulation of the argument accessCode/data/acceInfo leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Command injection and stack-based buffer overflow vulnerabilities in the KillDupUsr_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. Within the handler function of the /goform/addassignment route, a very long text entry for the"'s_ip" and "s_mac" fields could lead to a Stack-Based Buffer Overflow and overwrite the return address.

Tenda AC5 US_AC5V1.0RTL_V15.03.06.28 was discovered to contain a stack overflow via the fromSetSysTime function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

An issue was discovered in the calamine crate before 0.17.0 for Rust. It allows attackers to overwrite heap-memory locations because Vec::set_len is used without proper memory claiming, and this uninitialized memory is used for a user-provided Read operation, as demonstrated by Sectors::get.