A segmentation fault (SEGV) was detected in the Assimp::SplitLargeMeshesProcess_Triangle::UpdateNode function within the Assimp library during fuzz testing using AddressSanitizer. The crash occurs due to a read access violation at address 0x000000000460, which points to the zero page, indicating a null or invalid pointer dereference.

A vulnerability was determined in Open Asset Import Library Assimp 6.0.2. Affected is the function Q3DImporter::InternReadFile of the file assimp/code/AssetLib/Q3D/Q3DLoader.cpp. This manipulation causes allocation of resources. The attack is restricted to local execution. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in Open Asset Import Library Assimp 5.4.3. It has been classified as problematic. Affected is the function MDCImporter::InternReadFile of the file assimp/code/AssetLib/MDC/MDCLoader.cpp of the component MDC File Parser. The manipulation of the argument pcVerts leads to out-of-bounds read. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The project decided to collect all Fuzzer bugs in a main-issue to address them in the future.

A vulnerability was found in Open Asset Import Library Assimp 5.4.3. It has been declared as problematic. Affected by this vulnerability is the function LWOImporter::GetS0 in the library assimp/code/AssetLib/LWO/LWOLoader.h. The manipulation of the argument out leads to out-of-bounds read. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The project decided to collect all Fuzzer bugs in a main-issue to address them in the future.

A vulnerability was found in Open Asset Import Library Assimp 5.4.3 and classified as problematic. This issue affects the function MDCImporter::ValidateSurfaceHeader of the file assimp/code/AssetLib/MDC/MDCLoader.cpp. The manipulation of the argument pcSurface2 leads to out-of-bounds read. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The project decided to collect all Fuzzer bugs in a main-issue to address them in the future.

A vulnerability was found in Open Asset Import Library Assimp 5.4.3. It has been rated as problematic. Affected by this issue is the function MDLImporter::ImportUVCoordinate_3DGS_MDL345 of the file assimp/code/AssetLib/MDL/MDLLoader.cpp. The manipulation of the argument iIndex leads to out-of-bounds read. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The project decided to collect all Fuzzer bugs in a main-issue to address them in the future.

A vulnerability classified as problematic has been found in Open Asset Import Library Assimp 5.4.3. This affects the function MDLImporter::InternReadFile_3DGS_MDL345 of the file assimp/code/AssetLib/MDL/MDLLoader.cpp. The manipulation leads to out-of-bounds read. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The project decided to collect all Fuzzer bugs in a main-issue to address them in the future.

A vulnerability, which was classified as critical, was found in Open Asset Import Library Assimp 5.4.3. Affected is the function Assimp::MD2Importer::InternReadFile in the library code/AssetLib/MD2/MD2Loader.cpp of the component Malformed File Handler. The manipulation of the argument Name leads to stack-based buffer overflow. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

A heap-buffer-overflow vulnerability was discovered in the SkipSpacesAndLineEnd function in Assimp v5.4.3. This issue occurs when processing certain malformed MD5 model files, leading to an out-of-bounds read and potential application crash.

Heap-based buffer overflow vulnerability in Assimp versions prior to 5.4.2 allows a local attacker to execute arbitrary code by inputting a specially crafted file into the product.

A segmentation fault (SEGV) was detected in the SortByPTypeProcess::Execute function in the Assimp library during fuzz testing with AddressSanitizer. The crash occurred due to a read access to an invalid memory address (0x1000c9714971).

jq is a command-line JSON processor. Version 1.7 is vulnerable to heap-based buffer overflow. Version 1.7.1 contains a patch for this issue.

jq is a command-line JSON processor. Version 1.7 is vulnerable to stack-based buffer overflow in builds using decNumber. Version 1.7.1 contains a patch for this issue.

Buffer overflow in the array_from_pyobj function of fortranobject.c in NumPy < 1.19, which allows attackers to conduct a Denial of Service attacks by carefully constructing an array with negative values. NOTE: The vendor does not agree this is a vulnerability; the negative dimensions can only be created by an already privileged user (or internally)

Buffer overflow in Intel(R) Graphics Drivers before version 26.20.100.6912 may allow an authenticated user to potentially enable a denial of service via local access.

A buffer overflow vulnerability in “secpolicydelete” command in Brocade Fabric OS before Brocade Fabric OS v9.1.1c and v9.2.0 could allow an authenticated privileged user to crash the Brocade Fabric OS switch leading to a denial of service.

Buffer Overflow vulnerability found in Libming swftophp v.0.4.8 allows a local attacker to cause a denial of service via the newVar_N in util/decompile.c.

ForeScout - SecureConnector Local Service DoS - A low privilaged user which doesn't have permissions to shutdown the secure connector service writes a large amount of characters in the installationPath. This will cause the buffer to overflow and override the stack cookie causing the service to crash.

A stack corruption bug was found in libtpms in versions before 0.7.2 and before 0.8.0 while decrypting data using RSA. This flaw could result in a SIGBUS (bad memory access) and termination of swtpm. The highest threat from this vulnerability is to system availability.

Dell EMC CloudLink 7.1 and all prior versions contain a Buffer Overflow Vulnerability. A local low privileged attacker, may potentially exploit this vulnerability, leading to an application crash.

in OpenHarmony v3.2.2 and prior versions allow a local attacker cause DOS through buffer overflow.

Buffer overflow in the fuse_notify_inval_entry function in fs/fuse/dev.c in the Linux kernel before 3.1 allows local users to cause a denial of service (BUG_ON and system crash) by leveraging the ability to mount a FUSE filesystem.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

Certain Huawei products (AP2000;IPS Module;NGFW Module;NIP6300;NIP6600;NIP6800;S5700;SVN5600;SVN5800;SVN5800-C;SeMG9811;Secospace AntiDDoS8000;Secospace USG6300;Secospace USG6500;Secospace USG6600;USG6000V;eSpace U1981) have a buffer overflow vulnerability. An attacker who logs in to the board may send crafted messages from the internal network port or tamper with inter-process message packets to exploit this vulnerability. Due to insufficient validation of the message, successful exploit may cause the affected board to be abnormal.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix not checking skb length on hci_acldata_packet This fixes not checking if skb really contains an ACL header otherwise the code may attempt to access some uninitilized/invalid memory past the valid skb->data.

giflib v5.2.1 was discovered to contain a segmentation fault via the component getarg.c.

The (1) real_lookup and (2) __lookup_hash functions in fs/namei.c in the vfs implementation in the Linux kernel before 2.6.25.15 do not prevent creation of a child dentry for a deleted (aka S_DEAD) directory, which allows local users to cause a denial of service ("overflow" of the UBIFS orphan area) via a series of attempted file creations within deleted directories.

ipPulse 1.92 contains a denial of service vulnerability that allows local attackers to crash the application by providing an oversized input in the Enter Key field. Attackers can generate a 256-byte buffer of repeated 'A' characters to trigger an application crash when pasting the malicious content.

A buffer overflow vulnerability in the Zyxel ATP series firmware versions 4.32 through 5.37, USG FLEX series firmware versions 4.50 through 5.37, USG FLEX 50(W) series firmware versions 4.16 through 5.37, USG20(W)-VPN series firmware versions 4.16 through 5.37, and VPN series firmware versions 4.30 through 5.37, could allow an authenticated local attacker to cause denial-of-service (DoS) conditions by executing the CLI command to dump system logs on an affected device.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

A buffer overflow vulnerability in “diagstatus” command in Brocade Fabric OS before Brocade Fabric v9.2.0 and v9.1.1c could allow an authenticated user to crash the Brocade Fabric OS switch leading to a denial of service.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer The AD7923 was updated to support devices with 8 channels, but the size of tx_buf and ring_xfer was not increased accordingly, leading to a potential buffer overflow in ad7923_update_scan_mode().

Buffer overflow vulnerability in the component driver module Impact: Successful exploitation of this vulnerability may affect availability.

Vulnerability of input parameters not being verified during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

Buffer Overflow vulnerability found in Libming swftophp v.0.4.8 allows a local attacker to cause a denial of service via the cws2fws function in util/decompile.c.

Buffer overflow vulnerability in the HDC module. Impact: Successful exploitation of this vulnerability may affect availability.

In telecom service, there is a missing permission check. This could lead to local denial of service in telecom service.

A security flaw has been discovered in vim up to 9.1.1615. Affected by this vulnerability is the function main of the file src/xxd/xxd.c of the component xxd. The manipulation results in buffer overflow. The attack requires a local approach. The exploit has been released to the public and may be exploited. Upgrading to version 9.1.1616 addresses this issue. The patch is identified as eeef7c77436a78cd27047b0f5fa6925d56de3cb0. It is recommended to upgrade the affected component.

In the Linux kernel, the following vulnerability has been resolved: nvmet: Don't overflow subsysnqn nvmet_root_discovery_nqn_store treats the subsysnqn string like a fixed size buffer, even though it is dynamically allocated to the size of the string. Create a new string with kstrndup instead of using the old buffer.

In the Linux kernel, the following vulnerability has been resolved: clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access Flexible-array member `hws` in `struct clk_hw_onecell_data` is annotated with the `counted_by()` attribute. This means that when memory is allocated for this array, the _counter_, which in this case is member `num` in the flexible structure, should be set to the maximum number of elements the flexible array can contain, or fewer. In this case, the total number of elements for the flexible array is determined by variable `clks_num` when allocating heap space via `devm_kzalloc()`, as shown below: 289 struct loongson2_clk_provider *clp; ... 296 for (p = data; p->name; p++) 297 clks_num++; 298 299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num), 300 GFP_KERNEL); So, `clp->clk_data.num` should be set to `clks_num` or less, and not exceed `clks_num`, as is currently the case. Otherwise, if data is written into `clp->clk_data.hws[clks_num]`, the instrumentation provided by the compiler won't detect the overflow, leading to a memory corruption bug at runtime. Fix this issue by setting `clp->clk_data.num` to `clks_num`.

NetHack is a single player dungeon exploration game. Starting with version 3.6.2 and prior to version 3.6.7, illegal input to the "C" (call) command can cause a buffer overflow and crash the NetHack process. This vulnerability may be a security issue for systems that have NetHack installed suid/sgid and for shared systems. For all systems, it may result in a process crash. This issue is resolved in NetHack 3.6.7. There are no known workarounds.

Taurus-AN00B versions earlier than 10.1.0.156(C00E155R7P2) have a buffer overflow vulnerability. A function in a module does not verify inputs sufficiently. Attackers can exploit this vulnerability by sending specific request. This could compromise normal service of the affected device.

Buffer overflow in a subsystem for some Intel(R) Server Boards, Server Systems and Compute Modules before version 1.59 may allow a privileged user to potentially enable denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix overflow in oa batch buffer By default xe_bb_create_job() appends a MI_BATCH_BUFFER_END to batch buffer, this is not a problem if batch buffer is only used once but oa reuses the batch buffer for the same metric and at each call it appends a MI_BATCH_BUFFER_END, printing the warning below and then overflowing. [ 381.072016] ------------[ cut here ]------------ [ 381.072019] xe 0000:00:02.0: [drm] Assertion `bb->len * 4 + bb_prefetch(q->gt) <= size` failed! platform: LUNARLAKE subplatform: 1 graphics: Xe2_LPG / Xe2_HPG 20.04 step B0 media: Xe2_LPM / Xe2_HPM 20.00 step B0 tile: 0 VRAM 0 B GT: 0 type 1 So here checking if batch buffer already have MI_BATCH_BUFFER_END if not append it. v2: - simply fix, suggestion from Ashutosh (cherry picked from commit 9ba0e0f30ca42a98af3689460063edfb6315718a)

In multiple functions of JobStore.java, there is a possible way to cause a crash on startup due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-246542285

In multiple functions of multiple files, there is a possible way to make the device unusable due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-12 Android-12L Android-13Android ID: A-268193777

Buffer Overflow vulnerability in libpng 1.6.43-1.6.46 allows a local attacker to cause a denial of service via the pngimage with AddressSanitizer (ASan), the program leaks memory in various locations, eventually leading to high memory usage and causing the program to become unresponsive

Cobian Reflector 0.9.93 RC1 contains a denial of service vulnerability that allows attackers to crash the application by overflowing the password input field. Attackers can paste a large 8000-byte buffer into the password field to trigger an application crash during SFTP task configuration.