An issue was discovered in OpenSlides before 4.2.5. During login at the /system/auth/login/ endpoint, the system's response times differ depending on whether a user exists in the system. The timing discrepancy stems from the omitted hashing of the password (e.g., more than 100 milliseconds).

Fixed in v1.5.1, Argo version v1.5.0 was vulnerable to a user-enumeration vulnerability which allowed attackers to determine the usernames of valid (non-SSO) accounts because /api/v1/session returned 401 for an existing username and 404 otherwise.

An issue was discovered in AvertX Auto focus Night Vision HD Indoor/Outdoor IP Dome Camera HD838 and Night Vision HD Indoor/Outdoor Mini IP Bullet Camera HD438. Failed web UI login attempts elicit different responses depending on whether a user account exists. Because the responses indicate whether a submitted username is valid or not, they make it easier to identify legitimate usernames. If a login request is sent to ISAPI/Security/sessionLogin/capabilities using a username that exists, it will return the value of the salt given to that username, even if the password is incorrect. However, if a login request is sent using a username that is not present in the database, it will return an empty salt value. This allows attackers to enumerate legitimate usernames, facilitating brute-force attacks. NOTE: this is different from CVE-2020-7057.

Piccolo is an ORM and query builder which supports asyncio. In versions 0.120.0 and prior, the implementation of `BaseUser.login` leaks enough information to a malicious user such that they would be able to successfully generate a list of valid users on the platform. As Piccolo on its own does not also enforce strong passwords, these lists of valid accounts are likely to be used in a password spray attack with the outcome being attempted takeover of user accounts on the platform. The impact of this vulnerability is minor as it requires chaining with other attack vectors in order to gain more then simply a list of valid users on the underlying platform. The likelihood of this vulnerability is possible as it requires minimal skills to pull off, especially given the underlying login functionality for Piccolo based sites is open source. This issue has been patched in version 0.121.0.

A vulnerability in the External Interface of OTRS allows conclusions to be drawn about the existence of user accounts through different HTTP response codes and messages. This enables an attacker to systematically identify valid email addresses. This issue affects: * OTRS 7.0.X * OTRS 8.0.X * OTRS 2023.X * OTRS 2024.X * OTRS 2025.X

Umbraco is a free and open source .NET content management system. Starting in version 14.0.0 and prior to versions 14.3.2 and 15.1.2, it's possible to determine whether an account exists based on an analysis of response codes and timing of Umbraco management API responses. Versions 14.3.2 and 15.1.2 contain a patch. No known workarounds are available.

In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.

goauthentik is an open-source Identity Provider. In affected versions using a recovery flow with an identification stage an attacker is able to determine if a username exists. Only setups configured with a recovery flow are impacted by this. Anyone with a user account on a system with the recovery flow described above is susceptible to having their username/email revealed as existing. An attacker can easily enumerate and check users' existence using the recovery flow, as a clear message is shown when a user doesn't exist. Depending on configuration this can either be done by username, email, or both. This issue has been addressed in versions 2023.5.6 and 2023.6.2. Users are advised to upgrade. There are no known workarounds for this issue.

Username enumeration is possible through Bypassing CAPTCHA in On-premise SureMDM Solution on Windows deployment allows attacker to enumerate local user information via error message. This issue affects SureMDM On-premise: 6.31 and below version

An issue was discovered in the ProofreadPage (aka Proofread Page) extension for MediaWiki through 1.39.3. In includes/Page/PageContentHandler.php and includes/Page/PageDisplayHandler.php, hidden users can be exposed via public interfaces.

IBM Aspera Faspex 5.0.0 through 5.0.10 could disclose sensitive username information due to an observable response discrepancy.

Tadiran Telecom Aeonix - CWE-204: Observable Response Discrepancy

HashiCorp's Vault and Vault Enterprise are vulnerable to user enumeration when using the LDAP auth method. An attacker may submit requests of existent and non-existent LDAP users and observe the response from Vault to check if the account is valid on the LDAP server. This vulnerability is fixed in Vault 1.14.1 and 1.13.5.

A vulnerability classified as problematic has been found in Rotem Dynamics Rotem CRM up to 20230729. This affects an unknown part of the file /LandingPages/api/otp/send?id=[ID][ampersand]method=sms of the component OTP URI Interface. The manipulation leads to information exposure through discrepancy. It is possible to initiate the attack remotely. The identifier VDB-233253 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TN-5900 Series version 3.3 and prior versions is vulnearble to user enumeration vulnerability. The vulnerability may allow a remote attacker to determine whether a user is valid during password recovery through the web login page and enable a brute force attack with valid users.

User enumeration vulnerability in Password Recovery plugin 1.2 version for Roundcube, which could allow a remote attacker to create a test script against the password recovery function to enumerate all users in the database.

Avaya IX Workforce Engagement v15.2.7.1195 - User Enumeration - Observable Response Discrepancy

IBM Aspera Orchestrator 4.0.1 could allow a remote attacker to enumerate usernames due to observable response discrepancies. IBM X-Force ID: 248545.

By checking the result of calls to `window.open` with specifically set protocol handlers, an attacker could determine if the application which implements that protocol handler is installed. This vulnerability affects Firefox < 131, Firefox ESR < 128.3, Thunderbird < 128.3, and Thunderbird < 131.

A vulnerability in NetCat CMS allows an attacker to send a specially crafted http request that can be used to check whether a user exists in the system, which could be a basis for further attacks. This issue affects NetCat CMS v. 6.4.0.24126.2 and possibly others. Apply patch from vendor https://netcat.ru/ https://netcat.ru/] . Versions 6.4.0.24248 and on have the patch.

A vulnerability was found in nasirkhan Laravel Starter up to 11.8.0. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /forgot-password of the component Password Reset Handler. The manipulation of the argument Email leads to observable response discrepancy. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-268784. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Kurmi Provisioning Suite before 7.9.0.35, 7.10.x through 7.10.0.18, and 7.11.x through 7.11.0.15. An Observable Response Discrepancy vulnerability in the sendPasswordReinitLink action of the unlogged.do page allows remote attackers to test whether a username is valid or not. This allows confirmation of valid usernames.

Dependency-Track is a Component Analysis platform that allows organizations to identify and reduce risk in the software supply chain. Performing a login request against the /api/v1/user/login endpoint with a username that exist in the system takes significantly longer than performing the same action with a username that is not known by the system. The observable difference in request duration can be leveraged by actors to enumerate valid names of managed users. LDAP and OpenID Connect users are not affected. The issue has been fixed in Dependency-Track 4.12.2.

Combodo iTop is a simple, web based IT Service Management tool. Unauthenticated user can perform users enumeration, which can make it easier to bruteforce a valid account. As a fix the sentence displayed after resetting password no longer shows if the user exists or not. This fix is included in versions 2.7.11, 3.0.5, 3.1.2, and 3.2.0. Users are advised to upgrade. Users unable to upgrade may overload the dictionary entry `"UI:ResetPwd-Error-WrongLogin"` through an extension and replace it with a generic message.

Accounts enumeration vulnerability in the Login Component of Reolink Duo 2 WiFi Camera (Firmware Version v3.0.0.1889_23031701) allows remote attackers to determine valid user accounts via login attempts. This can lead to the enumeration of user accounts and potentially facilitate other attacks, such as brute-forcing of passwords. The vulnerability arises from the application responding differently to login attempts with valid and invalid usernames.

Jenkins GitLab Plugin 1.5.35 and earlier uses a non-constant time comparison function when checking whether the provided and expected webhook token are equal, potentially allowing attackers to use statistical methods to obtain a valid webhook token.

Snipe-IT through 6.0.14 allows attackers to check whether a user account exists because of response variations in a /password/reset request.

Jenkins Generic Webhook Trigger Plugin 1.84.1 and earlier uses a non-constant time comparison function when checking whether the provided and expected webhook token are equal, potentially allowing attackers to use statistical methods to obtain a valid webhook token.

Zitadel is an open source identity management system. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". Due to a implementation change to prevent deadlocks calling the database, the flag would not be correctly respected in all cases and an attacker would gain information if an account exist within ZITADEL, since the error message shows "object not found" instead of the generic error message. This vulnerability is fixed in 2.58.1, 2.57.1, 2.56.2, 2.55.5, 2.54.8, and 2.53.9.

In veilid-core in Veilid before 0.3.4, the protocol's ping function can be misused in a way that decreases the effectiveness of safety and private routes.

NVIDIA BMC contains a vulnerability in IPMI handler, where an unauthorized attacker can use certain oracles to guess a valid BMC username, which may lead to an information disclosure.

OpenCRX before v5.2.2 was discovered to be vulnerable to password enumeration due to the difference in error messages received during a password reset which could enable an attacker to determine if a username, email or ID is valid.

Dalmark Systems Systeam 2.22.8 build 1724 is vulnerable to User enumeration. The Systeam application is an ERP system that uses a mixed architecture based on SaaS tenant and user management, and on-premise database and web application counterparts. This issue occurs during the identification of the correct tenant for a given user, where a difference in messages could allow an attacker to determine if the given user is valid or not, enabling a brute force attack with valid users.

The authentication method in Laravel 8.x through 9.x before 9.32.0 was discovered to be vulnerable to user enumeration via timeless timing attacks with HTTP/2 multiplexing. This is caused by the early return inside the hasValidCredentials method in the Illuminate\Auth\SessionGuard class when a user is found to not exist.

vantage6 is a privacy preserving federated learning infrastructure for secure insight exchange. vantage6 does not inform the user of wrong username/password combination if the username actually exists. This is an attempt to prevent bots from obtaining usernames. However, if a wrong password is entered a number of times, the user account is blocked temporarily. This issue has been fixed in version 3.8.0.

An observable response discrepancy vulnerability [CWE-204] in FortiClientEMS 7.4.0, 7.2.0 through 7.2.4, 7.0 all versions, and FortiSOAR 7.5.0, 7.4.0 through 7.4.4, 7.3.0 through 7.3.2, 7.2 all versions, 7.0 all versions, 6.4 all versions may allow an unauthenticated attacker to enumerate valid users via observing login request responses.

IBM Control Center 6.2.1 and 6.3.1 could allow a remote attacker to enumerate usernames due to an observable discrepancy between login attempts.

OpenSearch Security is a plugin for OpenSearch that offers encryption, authentication and authorization. There is an observable discrepancy in the authentication response time between calls where the user provided exists and calls where it does not. This issue only affects calls using the internal basic identity provider (IdP), and not other externally configured IdPs. Patches were released in versions 1.3.9 and 2.6.0, there are no workarounds.

Jenkins GitHub Plugin 1.34.4 and earlier uses a non-constant time comparison function when checking whether the provided and computed webhook signatures are equal, allowing attackers to use statistical methods to obtain a valid webhook signature.

TYPO3 is an open source PHP based web content management system released under the GNU GPL. It has been discovered that observing response time during user authentication (backend and frontend) can be used to distinguish between existing and non-existing user accounts. Extension authors of 3rd party TYPO3 extensions providing a custom authentication service should check if the extension is affected by the described problem. Affected extensions must implement new `MimicServiceInterface::mimicAuthUser`, which simulates corresponding times regular processing would usually take. Update to TYPO3 version 7.6.58 ELTS, 8.7.48 ELTS, 9.5.37 ELTS, 10.4.32 or 11.5.16 that fix this problem. There are no known workarounds for this issue.

The login function of Mealie v1.0.0beta-2 allows attackers to enumerate existing usernames by timing the server's response time.

Using iterative requests an attacker was able to learn the size of an opaque response, as well as the contents of a server-supplied Vary header. This vulnerability affects Firefox < 119.

The private-key operations in ecc.c in wolfSSL before 4.4.0 do not use a constant-time modular inverse when mapping to affine coordinates, aka a "projective coordinates leak."

webcalendar before 1.2.7 shows the reason for a failed login (e.g., "no such user").

Adenza AxiomSL ControllerView through 10.8.1 is vulnerable to user enumeration. An attacker can identify valid usernames on the platform because a failed login attempt produces a different error message when the username is valid.

A vulnerability has been identified in Desigo DXR2 (All versions < V01.21.142.5-22), Desigo PXC3 (All versions < V01.21.142.4-18), Desigo PXC4 (All versions < V02.20.142.10-10884), Desigo PXC5 (All versions < V02.20.142.10-10884). The login functionality of the application fails to normalize the response times of login attempts performed with wrong usernames with the ones executed with correct usernames. A remote unauthenticated attacker could exploit this side-channel information to perform a username enumeration attack and identify valid usernames.

Jenkins Configuration as Code Plugin 1.55 and earlier used a non-constant time comparison function when validating an authentication token allowing attackers to use statistical methods to obtain a valid authentication token.

In NocoDB, versions 0.9 to 0.83.8 are vulnerable to Observable Discrepancy in the password-reset feature. When requesting a password reset for a given email address, the application displays an error message when the email isn't registered within the system. This allows attackers to enumerate the registered users' email addresses.

Flask-AppBuilder is an application development framework, built on top of the Flask web framework. In affected versions there exists a user enumeration vulnerability. This vulnerability allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Users are advised to upgrade to version 3.4.4 as soon as possible. There are no known workarounds for this issue.

A vulnerability in the TLS handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain access to sensitive information. This vulnerability is due to improper implementation of countermeasures against a Bleichenbacher attack on a device that uses SSL decryption policies. An attacker could exploit this vulnerability by sending crafted TLS messages to an affected device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device.