In the Linux kernel, the following vulnerability has been resolved: net: hsr: Fix potential use-after-free The skb is delivered to netif_rx() which may free it, after calling this, dereferencing skb may trigger use-after-free.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not clean up repair bio if submit fails The submit helper will always run bio_endio() on the bio if it fails to submit, so cleaning up the bio just leads to a variety of use-after-free and NULL pointer dereference bugs because we race with the endio function that is cleaning up the bio. Instead just return BLK_STS_OK as the repair function has to continue to process the rest of the pages, and the endio for the repair bio will do the appropriate cleanup for the page that it was given.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set hci_cmd_sync_queue shall return an error if HCI_UNREGISTER flag has been set as that means hci_unregister_dev has been called so it will likely cause a uaf after the timeout as the hdev will be freed.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix UAF of leds class devs at unbinding The LED class devices that are created by HD-audio codec drivers are registered via devm_led_classdev_register() and associated with the HD-audio codec device. Unfortunately, it turned out that the devres release doesn't work for this case; namely, since the codec resource release happens before the devm call chain, it triggers a NULL dereference or a UAF for a stale set_brightness_delay callback. For fixing the bug, this patch changes the LED class device register and unregister in a manual manner without devres, keeping the instances in hda_gen_spec.

In the Linux kernel, the following vulnerability has been resolved: ASoC: rt5645: Fix errorenous cleanup order There is a logic error when removing rt5645 device as the function rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and delete the &rt5645->btn_check_timer latter. However, since the timer handler rt5645_btn_check_callback() will re-queue the jack_detect_work, this cleanup order is buggy. That is, once the del_timer_sync in rt5645_i2c_remove is concurrently run with the rt5645_btn_check_callback, the canceled jack_detect_work will be rescheduled again, leading to possible use-after-free. This patch fix the issue by placing the del_timer_sync function before the cancel_delayed_work_sync.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: add vlan list lock to protect vlan list When adding port base VLAN, vf VLAN need to remove from HW and modify the vlan state in vf VLAN list as false. If the periodicity task is freeing the same node, it may cause "use after free" error. This patch adds a vlan list lock to protect the vlan list.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcmu: Fix possible page UAF tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not take refcount properly and just returns page pointer. When tcmu_try_get_data_page() returns, the returned page may have been freed by tcmu_blocks_release(). We need to get_page() under cmdr_lock to avoid concurrent tcmu_blocks_release().

In the Linux kernel, the following vulnerability has been resolved: drm/panfrost: Job should reference MMU not file_priv For a while now it's been allowed for a MMU context to outlive it's corresponding panfrost_priv, however the job structure still references panfrost_priv to get hold of the MMU context. If panfrost_priv has been freed this is a use-after-free which I've been able to trigger resulting in a splat. To fix this, drop the reference to panfrost_priv in the job structure and add a direct reference to the MMU structure which is what's actually needed.

In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix possible use-after-free in transport error_recovery work While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix use-after-free in chanctx code In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point. However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF due to race between btf_try_get_module and load_module While working on code to populate kfunc BTF ID sets for module BTF from its initcall, I noticed that by the time the initcall is invoked, the module BTF can already be seen by userspace (and the BPF verifier). The existing btf_try_get_module calls try_module_get which only fails if mod->state == MODULE_STATE_GOING, i.e. it can increment module reference when module initcall is happening in parallel. Currently, BTF parsing happens from MODULE_STATE_COMING notifier callback. At this point, the module initcalls have not been invoked. The notifier callback parses and prepares the module BTF, allocates an ID, which publishes it to userspace, and then adds it to the btf_modules list allowing the kernel to invoke btf_try_get_module for the BTF. However, at this point, the module has not been fully initialized (i.e. its initcalls have not finished). The code in module.c can still fail and free the module, without caring for other users. However, nothing stops btf_try_get_module from succeeding between the state transition from MODULE_STATE_COMING to MODULE_STATE_LIVE. This leads to a use-after-free issue when BPF program loads successfully in the state transition, load_module's do_init_module call fails and frees the module, and BPF program fd on close calls module_put for the freed module. Future patch has test case to verify we don't regress in this area in future. There are multiple points after prepare_coming_module (in load_module) where failure can occur and module loading can return error. We illustrate and test for the race using the last point where it can practically occur (in module __init function). An illustration of the race: CPU 0 CPU 1 load_module notifier_call(MODULE_STATE_COMING) btf_parse_module btf_alloc_id // Published to userspace list_add(&btf_mod->list, btf_modules) mod->init(...) ... ^ bpf_check | check_pseudo_btf_id | btf_try_get_module | returns true | ... ... | module __init in progress return prog_fd | ... ... V if (ret < 0) free_module(mod) ... close(prog_fd) ... bpf_prog_free_deferred module_put(used_btf.mod) // use-after-free We fix this issue by setting a flag BTF_MODULE_F_LIVE, from the notifier callback when MODULE_STATE_LIVE state is reached for the module, so that we return NULL from btf_try_get_module for modules that are not fully formed. Since try_module_get already checks that module is not in MODULE_STATE_GOING state, and that is the only transition a live module can make before being removed from btf_modules list, this is enough to close the race and prevent the bug. A later selftest patch crafts the race condition artifically to verify that it has been fixed, and that verifier fails to load program (with ENXIO). Lastly, a couple of comments: 1. Even if this race didn't exist, it seems more appropriate to only access resources (ksyms and kfuncs) of a fully formed module which has been initialized completely. 2. This patch was born out of need for synchronization against module initcall for the next patch, so it is needed for correctness even without the aforementioned race condition. The BTF resources initialized by module initcall are set up once and then only looked up, so just waiting until the initcall has finished ensures correct behavior.

In the Linux kernel, the following vulnerability has been resolved: mctp: fix use after free Clang static analysis reports this problem route.c:425:4: warning: Use of memory after it is freed trace_mctp_key_acquire(key); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ When mctp_key_add() fails, key is freed but then is later used in trace_mctp_key_acquire(). Add an else statement to use the key only when mctp_key_add() is successful.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent prealloc proc writes We have no protection against concurrent PCM buffer preallocation changes via proc files, and it may potentially lead to UAF or some weird problem. This patch applies the PCM open_mutex to the proc write operation for avoiding the racy proc writes and the PCM stream open (and further operations).

In the Linux kernel, the following vulnerability has been resolved: vdpa: fix use-after-free on vp_vdpa_remove When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove, triggering use-after-free. Call Trace of unbinding driver free vp_vdpa : do_syscall_64 vfs_write kernfs_fop_write_iter device_release_driver_internal pci_device_remove vp_vdpa_remove vdpa_unregister_device kobject_release device_release kfree Call Trace of dereference vp_vdpa->mdev.pci_dev: vp_modern_remove pci_release_selected_regions pci_release_region pci_resource_len pci_resource_end (dev)->resource[(bar)].end

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free. I'm marking this as addressing an issue introduced in commit f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f8273113 ("khugepaged: enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables.

In the Linux kernel, the following vulnerability has been resolved: peci: cpu: Fix use-after-free in adev_release() When auxiliary_device_add() returns an error, auxiliary_device_uninit() is called, which causes refcount for device to be decremented and .release callback will be triggered. Because adev_release() re-calls auxiliary_device_uninit(), it will cause use-after-free: [ 1269.455172] WARNING: CPU: 0 PID: 14267 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15 [ 1269.464007] refcount_t: underflow; use-after-free.

In the Linux kernel, the following vulnerability has been resolved: moxart: fix potential use-after-free on remove path It was reported that the mmc host structure could be accessed after it was freed in moxart_remove(), so fix this by saving the base register of the device and using it instead of the pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: bnxt: prevent skb UAF after handing over to PTP worker When reading the timestamp is required bnxt_tx_int() hands over the ownership of the completed skb to the PTP worker. The skb should not be used afterwards, as the worker may run before the rest of our code and free the skb, leading to a use-after-free. Since dev_kfree_skb_any() accepts NULL make the loss of ownership more obvious and set skb to NULL.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix pcluster use-after-free on UP platforms During stress testing with CONFIG_SMP disabled, KASAN reports as below: ================================================================== BUG: KASAN: use-after-free in __mutex_lock+0xe5/0xc30 Read of size 8 at addr ffff8881094223f8 by task stress/7789 CPU: 0 PID: 7789 Comm: stress Not tainted 6.0.0-rc1-00002-g0d53d2e882f9 #3 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: <TASK> .. __mutex_lock+0xe5/0xc30 .. z_erofs_do_read_page+0x8ce/0x1560 .. z_erofs_readahead+0x31c/0x580 .. Freed by task 7787 kasan_save_stack+0x1e/0x40 kasan_set_track+0x20/0x30 kasan_set_free_info+0x20/0x40 __kasan_slab_free+0x10c/0x190 kmem_cache_free+0xed/0x380 rcu_core+0x3d5/0xc90 __do_softirq+0x12d/0x389 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x97/0xb0 call_rcu+0x3d/0x3f0 erofs_shrink_workstation+0x11f/0x210 erofs_shrink_scan+0xdc/0x170 shrink_slab.constprop.0+0x296/0x530 drop_slab+0x1c/0x70 drop_caches_sysctl_handler+0x70/0x80 proc_sys_call_handler+0x20a/0x2f0 vfs_write+0x555/0x6c0 ksys_write+0xbe/0x160 do_syscall_64+0x3b/0x90 The root cause is that erofs_workgroup_unfreeze() doesn't reset to orig_val thus it causes a race that the pcluster reuses unexpectedly before freeing. Since UP platforms are quite rare now, such path becomes unnecessary. Let's drop such specific-designed path directly instead.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix UAF when detecting digest errors We should also bail from the io_work loop when we set rd_enabled to true, so we don't attempt to read data from the socket when the TCP stream is already out-of-sync or corrupted.

In the Linux kernel, the following vulnerability has been resolved: mm/slab_common: fix possible double free of kmem_cache When doing slub_debug test, kfence's 'test_memcache_typesafe_by_rcu' kunit test case cause a use-after-free error: BUG: KASAN: use-after-free in kobject_del+0x14/0x30 Read of size 8 at addr ffff888007679090 by task kunit_try_catch/261 CPU: 1 PID: 261 Comm: kunit_try_catch Tainted: G B N 6.0.0-rc5-next-20220916 #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x87/0x2a5 print_report+0x103/0x1ed kasan_report+0xb7/0x140 kobject_del+0x14/0x30 kmem_cache_destroy+0x130/0x170 test_exit+0x1a/0x30 kunit_try_run_case+0xad/0xc0 kunit_generic_run_threadfn_adapter+0x26/0x50 kthread+0x17b/0x1b0 </TASK> The cause is inside kmem_cache_destroy(): kmem_cache_destroy acquire lock/mutex shutdown_cache schedule_work(kmem_cache_release) (if RCU flag set) release lock/mutex kmem_cache_release (if RCU flag not set) In some certain timing, the scheduled work could be run before the next RCU flag checking, which can then get a wrong value and lead to double kmem_cache_release(). Fix it by caching the RCU flag inside protected area, just like 'refcnt'

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix use-after-free warning Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free bug The bug can be triggered by sending a single amdgpu_gem_userptr_ioctl to the AMDGPU DRM driver on any ASICs with an invalid address and size. The bug was reported by Joonkyo Jung <joonkyoj@yonsei.ac.kr>. For example the following code: static void Syzkaller1(int fd) { struct drm_amdgpu_gem_userptr arg; int ret; arg.addr = 0xffffffffffff0000; arg.size = 0x80000000; /*2 Gb*/ arg.flags = 0x7; ret = drmIoctl(fd, 0xc1186451/*amdgpu_gem_userptr_ioctl*/, &arg); } Due to the address and size are not valid there is a failure in amdgpu_hmm_register->mmu_interval_notifier_insert->__mmu_interval_notifier_insert-> check_shl_overflow, but we even the amdgpu_hmm_register failure we still call amdgpu_hmm_unregister into amdgpu_gem_object_free which causes access to a bad address. The following stack is below when the issue is reproduced when Kazan is enabled: [ +0.000014] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000009] RIP: 0010:mmu_interval_notifier_remove+0x327/0x340 [ +0.000017] Code: ff ff 49 89 44 24 08 48 b8 00 01 00 00 00 00 ad de 4c 89 f7 49 89 47 40 48 83 c0 22 49 89 47 48 e8 ce d1 2d 01 e9 32 ff ff ff <0f> 0b e9 16 ff ff ff 4c 89 ef e8 fa 14 b3 ff e9 36 ff ff ff e8 80 [ +0.000014] RSP: 0018:ffffc90002657988 EFLAGS: 00010246 [ +0.000013] RAX: 0000000000000000 RBX: 1ffff920004caf35 RCX: ffffffff8160565b [ +0.000011] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8881a9f78260 [ +0.000010] RBP: ffffc90002657a70 R08: 0000000000000001 R09: fffff520004caf25 [ +0.000010] R10: 0000000000000003 R11: ffffffff8161d1d6 R12: ffff88810e988c00 [ +0.000010] R13: ffff888126fb5a00 R14: ffff88810e988c0c R15: ffff8881a9f78260 [ +0.000011] FS: 00007ff9ec848540(0000) GS:ffff8883cc880000(0000) knlGS:0000000000000000 [ +0.000012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000010] CR2: 000055b3f7e14328 CR3: 00000001b5770000 CR4: 0000000000350ef0 [ +0.000010] Call Trace: [ +0.000006] <TASK> [ +0.000007] ? show_regs+0x6a/0x80 [ +0.000018] ? __warn+0xa5/0x1b0 [ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340 [ +0.000018] ? report_bug+0x24a/0x290 [ +0.000022] ? handle_bug+0x46/0x90 [ +0.000015] ? exc_invalid_op+0x19/0x50 [ +0.000016] ? asm_exc_invalid_op+0x1b/0x20 [ +0.000017] ? kasan_save_stack+0x26/0x50 [ +0.000017] ? mmu_interval_notifier_remove+0x23b/0x340 [ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340 [ +0.000019] ? mmu_interval_notifier_remove+0x23b/0x340 [ +0.000020] ? __pfx_mmu_interval_notifier_remove+0x10/0x10 [ +0.000017] ? kasan_save_alloc_info+0x1e/0x30 [ +0.000018] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? __kasan_kmalloc+0xb1/0xc0 [ +0.000018] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? __kasan_check_read+0x11/0x20 [ +0.000020] amdgpu_hmm_unregister+0x34/0x50 [amdgpu] [ +0.004695] amdgpu_gem_object_free+0x66/0xa0 [amdgpu] [ +0.004534] ? __pfx_amdgpu_gem_object_free+0x10/0x10 [amdgpu] [ +0.004291] ? do_syscall_64+0x5f/0xe0 [ +0.000023] ? srso_return_thunk+0x5/0x5f [ +0.000017] drm_gem_object_free+0x3b/0x50 [drm] [ +0.000489] amdgpu_gem_userptr_ioctl+0x306/0x500 [amdgpu] [ +0.004295] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004270] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? __this_cpu_preempt_check+0x13/0x20 [ +0.000015] ? srso_return_thunk+0x5/0x5f [ +0.000013] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ +0.000020] ? srso_return_thunk+0x5/0x5f [ +0.000014] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ +0.000022] ? drm_ioctl_kernel+0x17b/0x1f0 [drm] [ +0.000496] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004272] ? drm_ioctl_kernel+0x190/0x1f0 [drm] [ +0.000492] drm_ioctl_kernel+0x140/0x1f0 [drm] [ +0.000497] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu] [ +0.004297] ? __pfx_drm_ioctl_kernel+0x10/0x10 [d ---truncated---

A flaw was found in the Linux kernel’s futex implementation. This flaw allows a local attacker to corrupt system memory or escalate their privileges when creating a futex on a filesystem that is about to be unmounted. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

There exists a use-after-free vulnerability in the Linux kernel through io_uring and the IORING_OP_SPLICE operation. If IORING_OP_SPLICE is missing the IO_WQ_WORK_FILES flag, which signals that the operation won't use current->nsproxy, so its reference counter is not increased. This assumption is not always true as calling io_splice on specific files will call the get_uts function which will use current->nsproxy leading to invalidly decreasing its reference counter later causing the use-after-free vulnerability. We recommend upgrading to version 5.10.160 or above

In the Linux kernel, the following vulnerability has been resolved: nfs: fix UAF in direct writes In production we have been hitting the following warning consistently ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 17 PID: 1800359 at lib/refcount.c:28 refcount_warn_saturate+0x9c/0xe0 Workqueue: nfsiod nfs_direct_write_schedule_work [nfs] RIP: 0010:refcount_warn_saturate+0x9c/0xe0 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x9f/0x130 ? refcount_warn_saturate+0x9c/0xe0 ? report_bug+0xcc/0x150 ? handle_bug+0x3d/0x70 ? exc_invalid_op+0x16/0x40 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0x9c/0xe0 nfs_direct_write_schedule_work+0x237/0x250 [nfs] process_one_work+0x12f/0x4a0 worker_thread+0x14e/0x3b0 ? ZSTD_getCParams_internal+0x220/0x220 kthread+0xdc/0x120 ? __btf_name_valid+0xa0/0xa0 ret_from_fork+0x1f/0x30 This is because we're completing the nfs_direct_request twice in a row. The source of this is when we have our commit requests to submit, we process them and send them off, and then in the completion path for the commit requests we have if (nfs_commit_end(cinfo.mds)) nfs_direct_write_complete(dreq); However since we're submitting asynchronous requests we sometimes have one that completes before we submit the next one, so we end up calling complete on the nfs_direct_request twice. The only other place we use nfs_generic_commit_list() is in __nfs_commit_inode, which wraps this call in a nfs_commit_begin(); nfs_commit_end(); Which is a common pattern for this style of completion handling, one that is also repeated in the direct code with get_dreq()/put_dreq() calls around where we process events as well as in the completion paths. Fix this by using the same pattern for the commit requests. Before with my 200 node rocksdb stress running this warning would pop every 10ish minutes. With my patch the stress test has been running for several hours without popping.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_debug_files_proc_show() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

The sctp_do_peeloff function in net/sctp/socket.c in the Linux kernel before 4.14 does not check whether the intended netns is used in a peel-off action, which allows local users to cause a denial of service (use-after-free and system crash) or possibly have unspecified other impact via crafted system calls.

A use-after-free flaw was found in the Linux kernel’s pipes functionality in how a user performs manipulations with the pipe post_one_notification() after free_pipe_info() that is already called. This flaw allows a local user to crash or potentially escalate their privileges on the system.

A use-after-free vulnerabilitity was discovered in drivers/net/hamradio/6pack.c of linux that allows an attacker to crash linux kernel by simulating ax25 device using 6pack driver from user space.

The mq_notify function in the Linux kernel through 4.11.9 does not set the sock pointer to NULL upon entry into the retry logic. During a user-space close of a Netlink socket, it allows attackers to cause a denial of service (use-after-free) or possibly have unspecified other impact.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix Use-After-Free in ovs_ct_exit Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe.

In the Linux kernel, the following vulnerability has been resolved: devlink: fix possible use-after-free and memory leaks in devlink_init() The pernet operations structure for the subsystem must be registered before registering the generic netlink family. Make an unregister in case of unsuccessful registration.

In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts This patch is against CVE-2023-6270. The description of cve is: A flaw was found in the ATA over Ethernet (AoE) driver in the Linux kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on `struct net_device`, and a use-after-free can be triggered by racing between the free on the struct and the access through the `skbtxq` global queue. This could lead to a denial of service condition or potential code execution. In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial code is finished. But the net_device ifp will still be used in later tx()->dev_queue_xmit() in kthread. Which means that the dev_put(ifp) should NOT be called in the success path of skb initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into use-after-free because the net_device is freed. This patch removed the dev_put(ifp) in the success path in aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().

In the Linux kernel, the following vulnerability has been resolved: riscv: Fix module loading free order Reverse order of kfree calls to resolve use-after-free error.

In the Linux kernel, the following vulnerability has been resolved: gtp: fix use-after-free and null-ptr-deref in gtp_newlink() The gtp_link_ops operations structure for the subsystem must be registered after registering the gtp_net_ops pernet operations structure. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: [ 1010.702740] gtp: GTP module unloaded [ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI [ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1 [ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 [ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00 [ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203 [ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000 [ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282 [ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000 [ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80 [ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400 [ 1010.715953] FS: 00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000 [ 1010.715958] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0 [ 1010.715968] PKRU: 55555554 [ 1010.715972] Call Trace: [ 1010.715985] ? __die_body.cold+0x1a/0x1f [ 1010.715995] ? die_addr+0x43/0x70 [ 1010.716002] ? exc_general_protection+0x199/0x2f0 [ 1010.716016] ? asm_exc_general_protection+0x1e/0x30 [ 1010.716026] ? gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.716034] ? gtp_net_exit+0x150/0x150 [gtp] [ 1010.716042] __rtnl_newlink+0x1063/0x1700 [ 1010.716051] ? rtnl_setlink+0x3c0/0x3c0 [ 1010.716063] ? is_bpf_text_address+0xc0/0x1f0 [ 1010.716070] ? kernel_text_address.part.0+0xbb/0xd0 [ 1010.716076] ? __kernel_text_address+0x56/0xa0 [ 1010.716084] ? unwind_get_return_address+0x5a/0xa0 [ 1010.716091] ? create_prof_cpu_mask+0x30/0x30 [ 1010.716098] ? arch_stack_walk+0x9e/0xf0 [ 1010.716106] ? stack_trace_save+0x91/0xd0 [ 1010.716113] ? stack_trace_consume_entry+0x170/0x170 [ 1010.716121] ? __lock_acquire+0x15c5/0x5380 [ 1010.716139] ? mark_held_locks+0x9e/0xe0 [ 1010.716148] ? kmem_cache_alloc_trace+0x35f/0x3c0 [ 1010.716155] ? __rtnl_newlink+0x1700/0x1700 [ 1010.716160] rtnl_newlink+0x69/0xa0 [ 1010.716166] rtnetlink_rcv_msg+0x43b/0xc50 [ 1010.716172] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716179] ? lock_acquire+0x1fe/0x560 [ 1010.716188] ? netlink_deliver_tap+0x12f/0xd50 [ 1010.716196] netlink_rcv_skb+0x14d/0x440 [ 1010.716202] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716208] ? netlink_ack+0xab0/0xab0 [ 1010.716213] ? netlink_deliver_tap+0x202/0xd50 [ 1010.716220] ? netlink_deliver_tap+0x218/0xd50 [ 1010.716226] ? __virt_addr_valid+0x30b/0x590 [ 1010.716233] netlink_unicast+0x54b/0x800 [ 1010.716240] ? netlink_attachskb+0x870/0x870 [ 1010.716248] ? __check_object_size+0x2de/0x3b0 [ 1010.716254] netlink_sendmsg+0x938/0xe40 [ 1010.716261] ? netlink_unicast+0x800/0x800 [ 1010.716269] ? __import_iovec+0x292/0x510 [ 1010.716276] ? netlink_unicast+0x800/0x800 [ 1010.716284] __sock_sendmsg+0x159/0x190 [ 1010.716290] ____sys_sendmsg+0x712/0x880 [ 1010.716297] ? sock_write_iter+0x3d0/0x3d0 [ 1010.716304] ? __ia32_sys_recvmmsg+0x270/0x270 [ 1010.716309] ? lock_acquire+0x1fe/0x560 [ 1010.716315] ? drain_array_locked+0x90/0x90 [ 1010.716324] ___sys_sendmsg+0xf8/0x170 [ 1010.716331] ? sendmsg_copy_msghdr+0x170/0x170 [ 1010.716337] ? lockdep_init_map ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: tls: fix use-after-free with partial reads and async decrypt tls_decrypt_sg doesn't take a reference on the pages from clear_skb, so the put_page() in tls_decrypt_done releases them, and we trigger a use-after-free in process_rx_list when we try to read from the partially-read skb.

A use-after-free flaw was found in fs/ext4/namei.c:dx_insert_block() in the Linux kernel’s filesystem sub-component. This flaw allows a local attacker with a user privilege to cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp() The gtp_net_ops pernet operations structure for the subsystem must be registered before registering the generic netlink family. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp] Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86 df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74 RSP: 0018:ffff888014107220 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? show_regs+0x90/0xa0 ? die_addr+0x50/0xd0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? gtp_genl_dump_pdp+0x1be/0x800 [gtp] ? __alloc_skb+0x1dd/0x350 ? __pfx___alloc_skb+0x10/0x10 genl_dumpit+0x11d/0x230 netlink_dump+0x5b9/0xce0 ? lockdep_hardirqs_on_prepare+0x253/0x430 ? __pfx_netlink_dump+0x10/0x10 ? kasan_save_track+0x10/0x40 ? __kasan_kmalloc+0x9b/0xa0 ? genl_start+0x675/0x970 __netlink_dump_start+0x6fc/0x9f0 genl_family_rcv_msg_dumpit+0x1bb/0x2d0 ? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10 ? genl_op_from_small+0x2a/0x440 ? cap_capable+0x1d0/0x240 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 ? security_capable+0x9d/0xe0

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip end interval element from gc rbtree lazy gc on insert might collect an end interval element that has been just added in this transactions, skip end interval elements that are not yet active.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use-after-free issue in f2fs_filemap_fault syzbot reports a f2fs bug as below: BUG: KASAN: slab-use-after-free in f2fs_filemap_fault+0xd1/0x2c0 fs/f2fs/file.c:49 Read of size 8 at addr ffff88807bb22680 by task syz-executor184/5058 CPU: 0 PID: 5058 Comm: syz-executor184 Not tainted 6.7.0-syzkaller-09928-g052d534373b7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x163/0x540 mm/kasan/report.c:488 kasan_report+0x142/0x170 mm/kasan/report.c:601 f2fs_filemap_fault+0xd1/0x2c0 fs/f2fs/file.c:49 __do_fault+0x131/0x450 mm/memory.c:4376 do_shared_fault mm/memory.c:4798 [inline] do_fault mm/memory.c:4872 [inline] do_pte_missing mm/memory.c:3745 [inline] handle_pte_fault mm/memory.c:5144 [inline] __handle_mm_fault+0x23b7/0x72b0 mm/memory.c:5285 handle_mm_fault+0x27e/0x770 mm/memory.c:5450 do_user_addr_fault arch/x86/mm/fault.c:1364 [inline] handle_page_fault arch/x86/mm/fault.c:1507 [inline] exc_page_fault+0x456/0x870 arch/x86/mm/fault.c:1563 asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:570 The root cause is: in f2fs_filemap_fault(), vmf->vma may be not alive after filemap_fault(), so it may cause use-after-free issue when accessing vmf->vma->vm_flags in trace_f2fs_filemap_fault(). So it needs to keep vm_flags in separated temporary variable for tracepoint use.

Various refcounting bugs in the multi-BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to trigger use-after-free conditions to potentially execute code.

In the Linux kernel, the following vulnerability has been resolved: media: edia: dvbdev: fix a use-after-free In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed in several error-handling paths. However, *pdvbdev is not set to NULL after dvbdev's deallocation, causing use-after-frees in many places, for example, in the following call chain: budget_register |-> dvb_dmxdev_init |-> dvb_register_device |-> dvb_dmxdev_release |-> dvb_unregister_device |-> dvb_remove_device |-> dvb_device_put |-> kref_put When calling dvb_unregister_device, dmxdev->dvbdev (i.e. *pdvbdev in dvb_register_device) could point to memory that had been freed in dvb_register_device. Thereafter, this pointer is transferred to kref_put and triggering a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: net/ipv6: avoid possible UAF in ip6_route_mpath_notify() syzbot found another use-after-free in ip6_route_mpath_notify() [1] Commit f7225172f25a ("net/ipv6: prevent use after free in ip6_route_mpath_notify") was not able to fix the root cause. We need to defer the fib6_info_release() calls after ip6_route_mpath_notify(), in the cleanup phase. [1] BUG: KASAN: slab-use-after-free in rt6_fill_node+0x1460/0x1ac0 Read of size 4 at addr ffff88809a07fc64 by task syz-executor.2/23037 CPU: 0 PID: 23037 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-01035-gea7f3cfaa588 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x167/0x540 mm/kasan/report.c:488 kasan_report+0x142/0x180 mm/kasan/report.c:601 rt6_fill_node+0x1460/0x1ac0 inet6_rt_notify+0x13b/0x290 net/ipv6/route.c:6184 ip6_route_mpath_notify net/ipv6/route.c:5198 [inline] ip6_route_multipath_add net/ipv6/route.c:5404 [inline] inet6_rtm_newroute+0x1d0f/0x2300 net/ipv6/route.c:5517 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f73dd87dda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f73de6550c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f73dd9ac050 RCX: 00007f73dd87dda9 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005 RBP: 00007f73dd8ca47a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f73dd9ac050 R15: 00007ffdbdeb7858 </TASK> Allocated by task 23037: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:372 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:389 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:3981 [inline] __kmalloc+0x22e/0x490 mm/slub.c:3994 kmalloc include/linux/slab.h:594 [inline] kzalloc include/linux/slab.h:711 [inline] fib6_info_alloc+0x2e/0xf0 net/ipv6/ip6_fib.c:155 ip6_route_info_create+0x445/0x12b0 net/ipv6/route.c:3758 ip6_route_multipath_add net/ipv6/route.c:5298 [inline] inet6_rtm_newroute+0x744/0x2300 net/ipv6/route.c:5517 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 Freed by task 16: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x4e/0x60 mm/kasan/generic.c:640 poison_slab_object+0xa6/0xe0 m ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix UAF issue in ksmbd_tcp_new_connection() The race is between the handling of a new TCP connection and its disconnection. It leads to UAF on `struct tcp_transport` in ksmbd_tcp_new_connection() function.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix fortify source warning while accessing Eth segment ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_ ---truncated---

A flaw was found in the Linux kernel’s implementation of IO-URING. This flaw allows an attacker with local executable permission to create a string of requests that can cause a use-after-free flaw within the kernel. This issue leads to memory corruption and possible privilege escalation.

In the Linux kernel, the following vulnerability has been resolved: ceph: prevent use-after-free in encode_cap_msg() In fs/ceph/caps.c, in encode_cap_msg(), "use after free" error was caught by KASAN at this line - 'ceph_buffer_get(arg->xattr_buf);'. This implies before the refcount could be increment here, it was freed. In same file, in "handle_cap_grant()" refcount is decremented by this line - 'ceph_buffer_put(ci->i_xattrs.blob);'. It appears that a race occurred and resource was freed by the latter line before the former line could increment it. encode_cap_msg() is called by __send_cap() and __send_cap() is called by ceph_check_caps() after calling __prep_cap(). __prep_cap() is where arg->xattr_buf is assigned to ci->i_xattrs.blob. This is the spot where the refcount must be increased to prevent "use after free" error.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free in do_zone_finish() Shinichiro reported the following use-after-free triggered by the device replace operation in fstests btrfs/070. BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0 ================================================================== BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs] Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007 CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Call Trace: <TASK> dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0x200/0x3e0 kasan_report+0xd8/0x110 ? do_zone_finish+0x91a/0xb90 [btrfs] ? do_zone_finish+0x91a/0xb90 [btrfs] do_zone_finish+0x91a/0xb90 [btrfs] btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs] ? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs] ? btrfs_put_root+0x2d/0x220 [btrfs] ? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs] cleaner_kthread+0x21e/0x380 [btrfs] ? __pfx_cleaner_kthread+0x10/0x10 [btrfs] kthread+0x2e3/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 3493983: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 btrfs_alloc_device+0xb3/0x4e0 [btrfs] device_list_add.constprop.0+0x993/0x1630 [btrfs] btrfs_scan_one_device+0x219/0x3d0 [btrfs] btrfs_control_ioctl+0x26e/0x310 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Freed by task 3494056: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3f/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x32/0x70 kfree+0x11b/0x320 btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs] btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs] btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs] btrfs_ioctl+0xb27/0x57d0 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 The buggy address belongs to the object at ffff8881543c8000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 96 bytes inside of freed 1024-byte region [ffff8881543c8000, ffff8881543c8400) The buggy address belongs to the physical page: page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8 head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb This UAF happens because we're accessing stale zone information of a already removed btrfs_device in do_zone_finish(). The sequence of events is as follows: btrfs_dev_replace_start btrfs_scrub_dev btrfs_dev_replace_finishing btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced btrfs_rm_dev_replace_free_srcdev btrfs_free_device <-- device freed cleaner_kthread btrfs_delete_unused_bgs btrfs_zone_finish do_zone_finish <-- refers the freed device The reason for this is that we're using a ---truncated---

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: fix reference counting on zcrypt card objects Tests with hot-plugging crytpo cards on KVM guests with debug kernel build revealed an use after free for the load field of the struct zcrypt_card. The reason was an incorrect reference handling of the zcrypt card object which could lead to a free of the zcrypt card object while it was still in use. This is an example of the slab message: kernel: 0x00000000885a7512-0x00000000885a7513 @offset=1298. First byte 0x68 instead of 0x6b kernel: Allocated in zcrypt_card_alloc+0x36/0x70 [zcrypt] age=18046 cpu=3 pid=43 kernel: kmalloc_trace+0x3f2/0x470 kernel: zcrypt_card_alloc+0x36/0x70 [zcrypt] kernel: zcrypt_cex4_card_probe+0x26/0x380 [zcrypt_cex4] kernel: ap_device_probe+0x15c/0x290 kernel: really_probe+0xd2/0x468 kernel: driver_probe_device+0x40/0xf0 kernel: __device_attach_driver+0xc0/0x140 kernel: bus_for_each_drv+0x8c/0xd0 kernel: __device_attach+0x114/0x198 kernel: bus_probe_device+0xb4/0xc8 kernel: device_add+0x4d2/0x6e0 kernel: ap_scan_adapter+0x3d0/0x7c0 kernel: ap_scan_bus+0x5a/0x3b0 kernel: ap_scan_bus_wq_callback+0x40/0x60 kernel: process_one_work+0x26e/0x620 kernel: worker_thread+0x21c/0x440 kernel: Freed in zcrypt_card_put+0x54/0x80 [zcrypt] age=9024 cpu=3 pid=43 kernel: kfree+0x37e/0x418 kernel: zcrypt_card_put+0x54/0x80 [zcrypt] kernel: ap_device_remove+0x4c/0xe0 kernel: device_release_driver_internal+0x1c4/0x270 kernel: bus_remove_device+0x100/0x188 kernel: device_del+0x164/0x3c0 kernel: device_unregister+0x30/0x90 kernel: ap_scan_adapter+0xc8/0x7c0 kernel: ap_scan_bus+0x5a/0x3b0 kernel: ap_scan_bus_wq_callback+0x40/0x60 kernel: process_one_work+0x26e/0x620 kernel: worker_thread+0x21c/0x440 kernel: kthread+0x150/0x168 kernel: __ret_from_fork+0x3c/0x58 kernel: ret_from_fork+0xa/0x30 kernel: Slab 0x00000372022169c0 objects=20 used=18 fp=0x00000000885a7c88 flags=0x3ffff00000000a00(workingset|slab|node=0|zone=1|lastcpupid=0x1ffff) kernel: Object 0x00000000885a74b8 @offset=1208 fp=0x00000000885a7c88 kernel: Redzone 00000000885a74b0: bb bb bb bb bb bb bb bb ........ kernel: Object 00000000885a74b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a74f8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk kernel: Object 00000000885a7508: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 68 4b 6b 6b 6b a5 kkkkkkkkkkhKkkk. kernel: Redzone 00000000885a7518: bb bb bb bb bb bb bb bb ........ kernel: Padding 00000000885a756c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ kernel: CPU: 0 PID: 387 Comm: systemd-udevd Not tainted 6.8.0-HF #2 kernel: Hardware name: IBM 3931 A01 704 (KVM/Linux) kernel: Call Trace: kernel: [<00000000ca5ab5b8>] dump_stack_lvl+0x90/0x120 kernel: [<00000000c99d78bc>] check_bytes_and_report+0x114/0x140 kernel: [<00000000c99d53cc>] check_object+0x334/0x3f8 kernel: [<00000000c99d820c>] alloc_debug_processing+0xc4/0x1f8 kernel: [<00000000c99d852e>] get_partial_node.part.0+0x1ee/0x3e0 kernel: [<00000000c99d94ec>] ___slab_alloc+0xaf4/0x13c8 kernel: [<00000000c99d9e38>] __slab_alloc.constprop.0+0x78/0xb8 kernel: [<00000000c99dc8dc>] __kmalloc+0x434/0x590 kernel: [<00000000c9b4c0ce>] ext4_htree_store_dirent+0x4e/0x1c0 kernel: [<00000000c9b908a2>] htree_dirblock_to_tree+0x17a/0x3f0 kernel: ---truncated---