AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, or data tampering.  

An OS Command Injection vulnerability in Parks Fiberlink 210 firmware version V2.1.14_X000 was found via the /boaform/admin/formPing target_addr parameter.

An OS command injection vulnerability exists in the data.cgi xfer_dns functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

The GLPI Agent is a generic management agent. Prior to version 1.5, if glpi-agent is running remoteinventory task against an Unix platform with ssh command, an administrator user on the remote can manage to inject a command in a specific workflow the agent would run with the privileges it uses. In the case, the agent is running with administration privileges, a malicious user could gain high privileges on the computer glpi-agent is running on. A malicious user could also disclose all remote accesses the agent is configured with for remoteinventory task. This vulnerability has been patched in glpi-agent 1.5.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from inadequate input validation in the certificate management function, which could potentially allow malicious users to execute remote code on affected devices.

Improper Neutralization of Special Elements used in an OS Command vulnerability in NEC Corporation Aterm WG2600HP2, WG2600HP, WG2200HP, WG1800HP2, WG1800HP, WG1400HP, WG600HP, WG300HP, WF300HP, WR9500N, WR9300N, WR8750N, WR8700N, WR8600N, WR8370N, WR8175N and WR8170N all versions allows a attacker to execute an arbitrary OS command with the root privilege, after obtaining a high privilege exploiting CVE-2023-3330 and CVE-2023-3331 vulnerabilities.

Artica Proxy 4.26 allows remote command execution for an authenticated user via shell metacharacters in the "Modify the hostname" field.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation in the certificate-generation function, which could potentially allow malicious users to execute remote code on affected devices.

AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, or data tampering.

A high privileged remote attacker can execute arbitrary system commands via POST requests in the diagnostic action due to improper neutralization of special elements used in an OS command.

A command injection vulnerability was found in the ping functionality of the MitraStar GPT-2741GNAC router (firmware version AR_g5.8_110WVN0b7_2). The vulnerability allows an authenticated user to execute arbitrary OS commands by sending specially crafted input to the router via the ping function.

IBM Security Verify Governance 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 256036.

TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the certification-generation function, which could potentially allow malicious users to execute remote code on affected devices.

The Dataprobe iBoot PDU running firmware version 1.43.03312023 or earlier is vulnerable to command injection via the `user-name` URL parameter. An authenticated malicious agent can exploit this vulnerability to execute arbitrary command on the underlying Linux operating system.

Improper neutralization of special elements in WL-WN531AX2 firmware versions prior to 2023526 allows an attacker with an administrative privilege to execute OS commands with the root privilege.

An OS command injection vulnerability has been reported to affect Container Station. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following version: Container Station 2.6.7.44 and later

The Dataprobe iBoot PDU running firmware version 1.43.03312023 or earlier contains a buffer overflow vulnerability in the librta.so.0.0.0 library.Successful exploitation could cause denial of service or unexpected behavior with respect to all interactions relying on the targeted vulnerable binary, including the ability to log in via the web server.

A remote arbitrary command execution vulnerability was discovered in HPE Aruba Instant (IAP) version(s): Aruba Instant 6.4.x.x: 6.4.4.8-4.2.4.18 and below; Aruba Instant 6.5.x.x: 6.5.4.20 and below; Aruba Instant 8.5.x.x: 8.5.0.12 and below; Aruba Instant 8.6.x.x: 8.6.0.11 and below; Aruba Instant 8.7.x.x: 8.7.1.3 and below. Aruba has released patches for Aruba Instant (IAP) that address this security vulnerability.

An issue was discovered in Veritas InfoScale Operations Manager (VIOM) before 7.4.2.800 and 8.x before 8.0.410. The VIOM web application does not validate user-supplied data and appends it to OS commands and internal binaries used by the application. An attacker with root/administrator level privileges can leverage this to read sensitive data stored on the servers, modify data or server configuration, and delete data or application configuration.

NVIDIA Bluefield 2 and Bluefield 3 DPU BMC contains a vulnerability in ipmitool, where a root user may cause code injection by a network call. A successful exploit of this vulnerability may lead to code execution on the OS.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions: QTS 4.5.1.1456 build 20201015 (and later) QuTS hero h4.5.1.1472 build 20201031 (and later)

OS command injection vulnerability exists in Wi-Fi AP UNIT allows. If this vulnerability is exploited, a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command. Affected products and versions are as follows: AC-PD-WAPU v1.05_B04 and earlier, AC-PD-WAPUM v1.05_B04 and earlier, AC-PD-WAPU-P v1.05_B04P and earlier, AC-PD-WAPUM-P v1.05_B04P and earlier, AC-WAPU-300 v1.00_B07 and earlier, AC-WAPUM-300 v1.00_B07 and earlier, AC-WAPU-300-P v1.00_B07 and earlier, and AC-WAPUM-300-P v1.00_B07 and earlier

Dell EMC CloudLink 7.1 and all prior versions contain an OS command injection Vulnerability. A remote high privileged attacker, may potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker. This vulnerability is considered critical as it may be leveraged to completely compromise the vulnerable application as well as the underlying operating system. Dell recommends customers to upgrade at the earliest opportunity.

A server side remote code execution vulnerability was found in Foreman project. A authenticated attacker could use Sendmail configuration options to overwrite the defaults and perform command injection. The highest threat from this vulnerability is to confidentiality, integrity and availability of system. Fixed releases are 2.4.1, 2.5.1, 3.0.0.

A high privileged remote attacker can execute arbitrary system commands via GET requests in the cloud server communication script due to improper neutralization of special elements used in an OS command.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

An OS command injection vulnerability exists in the admin.cgi MVPN_trial_init functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Wi-Fi AP UNIT AC-PD-WAPU v1.05_B04 and earlier, AC-PD-WAPUM v1.05_B04 and earlier, AC-PD-WAPU-P v1.05_B04P and earlier, AC-PD-WAPUM-P v1.05_B04P and earlier, AC-WAPU-300 v1.00_B07 and earlier, AC-WAPU-300-P v1.00_B08P and earlier, AC-WAPUM-300 v1.00_B07 and earlier, and AC-WAPUM-300-P v1.00_B08P and earlier allow an authenticated user with an administrative privilege to execute an arbitrary OS command.

When DNS is provisioned, an authenticated remote command execution vulnerability exists in DNS iQuery mesh. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

An OS Command Injection issue exists in wivia 5 all versions. If this vulnerability is exploited, an arbitrary OS command may be executed by a logged-in administrative user.

An OS command injection vulnerability exists in the admin.cgi USSD_send functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A vulnerability was reported in Lenovo Smart Camera X3, X5, and C2E that could allow command injection by setting a specially crafted network configuration. This vulnerability is the same as CNVD-2020-68652.

The post-authentication command injection vulnerability in the Zyxel NAS326 firmware versions prior to V5.21(AAZF.13)C0 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device remotely.

On Barracuda CloudGen WAN Private Edge Gateway devices before 8 webui-sdwan-1089-8.3.1-174141891, an OS command injection vulnerability exists in /ajax/update_certificate - a crafted HTTP request allows an authenticated attacker to execute arbitrary commands. For example, a name field can contain :password and a password field can contain shell metacharacters.

A remote authenticated arbitrary command execution vulnerability was discovered in Aruba AirWave Management Platform version(s): Prior to 8.2.12.0. Vulnerabilities in the AirWave CLI could allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to full system compromise.

HGiga MailSherlock query function for connection log has a vulnerability of insufficient filtering for user input. An authenticated remote attacker with administrator privilege can exploit this vulnerability to inject and execute arbitrary system commands to perform arbitrary system operation or disrupt service.

Two OS command injection vulnerabilities exist in the zebra vlan_name functionality of Milesight UR32L v32.3.0.5. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is in the code branch that manages an already existing vlan configuration.

Two OS command injection vulnerabilities exist in the zebra vlan_name functionality of Milesight UR32L v32.3.0.5. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is in the code branch that manages a new vlan configuration.

An OS command injection vulnerability exists in the ys_thirdparty system_user_script functionality of Milesight UR32L v32.3.0.5. A specially crafted series of network requests can lead to command execution. An attacker can send a sequence of requests to trigger this vulnerability.

A high privileged remote attacker can execute arbitrary system commands via POST requests in the send_sms action due to improper neutralization of special elements used in an OS command.

A vulnerability was found in Chengdu VEC40G 3.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /send_order.cgi?parameter=access_detect of the component Network Detection. The manipulation of the argument COUNT with the input 3 | netstat -an leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-228013 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

NVIDIA DGX-1 BMC contains a vulnerability in the SPX REST API, where an attacker with the appropriate level of authorization can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, and data tampering.

A vulnerability in GL.iNET GL-E750 Mudi before firmware v3.216 allows authenticated attackers to execute arbitrary code via a crafted POST request.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2376 build 20230421 and later QuTS hero h5.0.1.2376 build 20230421 and later QuTScloud c5.1.0.2498 and later

An OS command injection vulnerability has been reported to affect QNAP operating systems. If exploited, the vulnerability possibly allows remote authenticated administrators to execute commands via unspecified vectors. QES is not affected. We have already fixed the vulnerability in the following versions: QTS 5.0.1.2346 build 20230322 and later QTS 4.5.4.2374 build 20230416 and later QuTS hero h5.0.1.2348 build 20230324 and later QuTS hero h4.5.4.2374 build 20230417 and later QuTScloud c5.0.1.2374 and later

MAHO-PBX NetDevancer Lite/Uni/Pro/Cloud prior to Ver.1.11.00, MAHO-PBX NetDevancer VSG Lite/Uni prior to Ver.1.11.00, and MAHO-PBX NetDevancer MobileGate Home/Office prior to Ver.1.11.00 allow a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command.

An OS command injection vulnerability exists in the ys_thirdparty check_system_user functionality of Milesight UR32L v32.3.0.5. A specially crafted set of network packets can lead to command execution. An attacker can send a network request to trigger this vulnerability.

InHand Networks InRouter 302, prior to version IR302 V3.5.56, and InRouter 615, prior to version InRouter6XX-S-V2.3.0.r5542, contain vulnerability CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection'). An unauthorized user with privileged access to the local web interface or the cloud account managing the affected devices could push a specially crafted configuration update file to gain root access. This could lead to remote code execution with root privileges.

The ping page of the administration panel in Telmat AccessLog <= 6.0 (TAL_20180415) allows an attacker to get root shell access via authenticated code injection over the network.