A security vulnerability has been detected in D-Link DWR-M920, DWR-M921, DIR-822K and DIR-825M 1.1.5. Impacted is the function system of the file /boafrm/formDebugDiagnosticRun. The manipulation of the argument host leads to command injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.
IBM Aspera Orchestrator 4.0.0 through 4.1.0 could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input.
sendfax.php in iFAX AvantFAX before 3.3.6 and HylaFAX Enterprise Web Interface before 0.2.5 allows authenticated Command Injection.
An issue was discovered in Open-AudIT 3.3.1. There is shell metacharacter injection via attributes to an open-audit/configuration/ URI. An attacker can exploit this by adding an excluded IP address to the global discovery settings (internally called exclude_ip). This exclude_ip value is passed to the exec function in the discoveries_helper.php file (inside the all_ip_list function) without being filtered, which means that the attacker can provide a payload instead of a valid IP address.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability was found in mirweiye wenkucms up to 3.4. This impacts the function createPathOne of the file app/common/common.php. The manipulation results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used.
A vulnerability was found in samanhappy MCPHub up to 0.9.10. Affected by this issue is some unknown functionality of the file src/controllers/serverController.ts. The manipulation of the argument command/args results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.
An OS Command Injection vulnerability in Kiloview NDI allows a low-privileged user to execute arbitrary code remotely on the device with high privileges. This issue affects Kiloview NDI N3, N3-s, N4, N20, N30, N40 and was fixed in Firmware version 2.02.0227 .
Certain models of NVR developed by Digiever has an OS Command Injection vulnerability, allowing authenticated remote attackers to inject arbitrary OS commands and execute them on the device.
The N-Reporter, N-Cloud, and N-Probe developed by N-Partner has an OS Command Injection vulnerability, allowing authenticated remote attackers to inject arbitrary OS commands and execute them on the server.
The airPASS from NetVision Information has an OS Command Injection vulnerability, allowing remote attackers with regular privileges to inject and execute arbitrary OS commands.
A vulnerability was found in DedeCMS up to 5.7.115. It has been rated as critical. This issue affects some unknown processing of the file /dede/article_string_mix.php. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Cohesive Networks VNS3 Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Cohesive Networks VNS3. Authentication is required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 8000 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24178.
In PHP versions 8.1.* before 8.1.30, 8.2.* before 8.2.24, 8.3.* before 8.3.12, when using a certain non-standard configurations of Windows codepages, the fixes for CVE-2024-4577 https://github.com/advisories/GHSA-vxpp-6299-mxw3 may still be bypassed and the same command injection related to Windows "Best Fit" codepage behavior can be achieved. This may allow a malicious user to pass options to PHP binary being run, and thus reveal the source code of scripts, run arbitrary PHP code on the server, etc.
A vulnerability was found in TOTOLINK T10 4.1.8cu.5207. It has been declared as critical. This vulnerability affects the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument command leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability was determined in Tenda AC9 and AC15 15.03.05.14. This affects the function formexeCommand of the file /goform/exeCommand. This manipulation of the argument cmdinput causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.
An OS command injection vulnerability exists in the web interface /action/ipcamRecordPost functionality of Abode Systems, Inc. iota All-In-One Security Kit 6.9X and 6.9Z. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the Gateway key.
A vulnerability has been found in TOTOLINK AC1200 T8 4.1.5cu.861_B20230220 and classified as critical. This vulnerability affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument slaveIpList leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Cohesive Networks VNS3 Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Cohesive Networks VNS3. Authentication is required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 8000 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24177.
An issue was discovered in Titan SpamTitan 7.07. Improper validation of the parameter fname on the page certs-x.php would allow an attacker to execute remote code on the target server. The user has to be authenticated before interacting with this page.
Gargoyle router management utility versions 1.5.x contain an authenticated OS command execution vulnerability in /utility/run_commands.sh. The application fails to properly restrict or validate input supplied via the 'commands' parameter, allowing an authenticated attacker to execute arbitrary shell commands on the underlying system. Successful exploitation may result in full compromise of the device, including unauthorized access to system files and execution of attacker-controlled commands.
An os command injection vulnerability exists in the aVideoEncoder wget functionality of WWBN AVideo 11.6 and dev master commit 3f7c0364. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability.
A vulnerability classified as critical has been found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. Affected is the function NTPSyncWithHost of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument hostTime leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272592. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in Alien Technology ALR-F800 up to 19.10.24.00. It has been declared as critical. Affected by this vulnerability is the function popen of the file /var/www/cgi-bin/upgrade.cgi of the component File Name Handler. The manipulation of the argument uploadedFile leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability has been found in TOTOLINK A3600R 4.1.2cu.5182_B20201102 and classified as critical. This vulnerability affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ipDoamin leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272596. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Grandstream GXV3370 before 1.0.1.41 and WP820 before 1.0.3.6 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in a /manager?action=getlogcat priority field.
PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices allow authenticated users to inject system commands through a modified POST request to a specific URL.
An low privileged remote attacker can execute OS commands with root privileges due to improper neutralization of special elements in user data.
graph_realtime.php in Cacti 1.2.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in a cookie, if a guest user has the graph real-time privilege.
app/operator_panel/exec.php in the Operator Panel module in FusionPBX 4.4.3 suffers from a command injection vulnerability due to a lack of input validation that allows authenticated non-administrative attackers to execute commands on the host. This can further lead to remote code execution when combined with an XSS vulnerability also present in the FusionPBX Operator Panel module.
Atcom 100M IP Phones firmware version 2.7.x.x contains an authenticated command injection vulnerability in the web configuration CGI script that allows attackers to execute arbitrary system commands. Attackers can inject shell commands through the 'cmd' parameter in web_cgi_main.cgi, enabling remote code execution with administrative credentials.
reNgine 2.2.0 contains a command injection vulnerability in the nmap_cmd parameter of scan engine configuration that allows authenticated attackers to execute arbitrary commands. Attackers can modify the nmap_cmd parameter with malicious base64-encoded payloads to achieve remote code execution during scan engine configuration.
A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC 1.0. Affected by this issue is the function get_ip_addr_details of the file /view/dhcp/dhcpConfig/commit.php. The manipulation of the argument ethname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-269156. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
FreePBX 16 contains an authenticated remote code execution vulnerability in the API module that allows attackers with valid session credentials to execute arbitrary commands. Attackers can exploit the 'generatedocs' endpoint by crafting malicious POST requests with bash command injection to establish remote shell access.
TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "switch" parameter in setScheduleCfg.
TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "recHour" parameter in setScheduleCfg.
TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "limit" parameter in setVpnAccountCfg.
TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "week" parameter in setScheduleCfg.
The Insert or Embed Articulate Content into WordPress plugin before 4.3000000024 does not prevent authors from uploading arbitrary files to the site, which may allow them to upload PHP shells on affected sites.
Multiple improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerabilities [CWE-78] in Fortinet FortiIsolator version 2.4.0 through 2.4.5 allows an authenticated attacker with at least read-only admin permission and CLI access to execute unauthorized code via specifically crafted CLI commands.
In PHP versions 8.1.* before 8.1.29, 8.2.* before 8.2.20, 8.3.* before 8.3.8, the fix for CVE-2024-1874 does not work if the command name includes trailing spaces. Original issue: when using proc_open() command with array syntax, due to insufficient escaping, if the arguments of the executed command are controlled by a malicious user, the user can supply arguments that would execute arbitrary commands in Windows shell.
CyberPanel before 2.3.8 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the phpSelection field to the websites/submitWebsiteCreation URI.
Command injection is possible in the puppetlabs-mysql module prior to version 13.0.0. A malicious actor is able to exploit this vulnerability only if they are able to provide unsanitized input to the module. This condition is rare in most deployments of Puppet and Puppet Enterprise.
Openfind Mail2000 does not properly filter parameters of specific CGI. Remote attackers with regular privileges can exploit this vulnerability to execute arbitrary system commands on the remote server.
OpenVPN 2.7_alpha1 through 2.7_beta1 on POSIX based platforms allows a remote authenticated server to inject shell commands via DNS variables when --dns-updown is in use
The Bosch Ethernet switch PRA-ES8P2S with software version 1.01.05 and earlier was found to be vulnerable to command injection through its diagnostics web interface. This allows execution of shell commands.
Certain ASUS WiFi routers models has an OS Command Injection vulnerability, allowing an authenticated remote attacker to execute arbitrary system commands by sending a specially crafted request.
In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doPPPo function.