In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before using dc->clk_mgr [WHY & HOW] dc->clk_mgr is null checked previously in the same function, indicating it might be null. Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which dereferences null "dc->clk_mgr". (The function pointer resolves to "dcn35_apply_idle_power_optimizations".) This fixes 1 FORWARD_NULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: idpf: fix idpf_vc_core_init error path In an event where the platform running the device control plane is rebooted, reset is detected on the driver. It releases all the resources and waits for the reset to complete. Once the reset is done, it tries to build the resources back. At this time if the device control plane is not yet started, then the driver timeouts on the virtchnl message and retries to establish the mailbox again. In the retry flow, mailbox is deinitialized but the mailbox workqueue is still alive and polling for the mailbox message. This results in accessing the released control queue leading to null-ptr-deref. Fix it by unrolling the work queue cancellation and mailbox deinitialization in the reverse order which they got initialized.

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: sdm845: add missing soundwire runtime stream alloc During the migration of Soundwire runtime stream allocation from the Qualcomm Soundwire controller to SoC's soundcard drivers the sdm845 soundcard was forgotten. At this point any playback attempt or audio daemon startup, for instance on sdm845-db845c (Qualcomm RB3 board), will result in stream pointer NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101ecf000 [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: ... CPU: 5 UID: 0 PID: 1198 Comm: aplay Not tainted 6.12.0-rc2-qcomlt-arm64-00059-g9d78f315a362-dirty #18 Hardware name: Thundercomm Dragonboard 845c (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] lr : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] sp : ffff80008a2035c0 x29: ffff80008a2035c0 x28: ffff80008a203978 x27: 0000000000000000 x26: 00000000000000c0 x25: 0000000000000000 x24: ffff1676025f4800 x23: ffff167600ff1cb8 x22: ffff167600ff1c98 x21: 0000000000000003 x20: ffff167607316000 x19: ffff167604e64e80 x18: 0000000000000000 x17: 0000000000000000 x16: ffffcec265074160 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff167600ff1cec x5 : ffffcec22cfa2010 x4 : 0000000000000000 x3 : 0000000000000003 x2 : ffff167613f836c0 x1 : 0000000000000000 x0 : ffff16761feb60b8 Call trace: sdw_stream_add_slave+0x44/0x380 [soundwire_bus] wsa881x_hw_params+0x68/0x80 [snd_soc_wsa881x] snd_soc_dai_hw_params+0x3c/0xa4 __soc_pcm_hw_params+0x230/0x660 dpcm_be_dai_hw_params+0x1d0/0x3f8 dpcm_fe_dai_hw_params+0x98/0x268 snd_pcm_hw_params+0x124/0x460 snd_pcm_common_ioctl+0x998/0x16e8 snd_pcm_ioctl+0x34/0x58 __arm64_sys_ioctl+0xac/0xf8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xe0 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: aa0403fb f9418400 9100e000 9400102f (f8420f22) ---[ end trace 0000000000000000 ]--- 0000000000006108 <sdw_stream_add_slave>: 6108: d503233f paciasp 610c: a9b97bfd stp x29, x30, [sp, #-112]! 6110: 910003fd mov x29, sp 6114: a90153f3 stp x19, x20, [sp, #16] 6118: a9025bf5 stp x21, x22, [sp, #32] 611c: aa0103f6 mov x22, x1 6120: 2a0303f5 mov w21, w3 6124: a90363f7 stp x23, x24, [sp, #48] 6128: aa0003f8 mov x24, x0 612c: aa0203f7 mov x23, x2 6130: a9046bf9 stp x25, x26, [sp, #64] 6134: aa0403f9 mov x25, x4 <-- x4 copied to x25 6138: a90573fb stp x27, x28, [sp, #80] 613c: aa0403fb mov x27, x4 6140: f9418400 ldr x0, [x0, #776] 6144: 9100e000 add x0, x0, #0x38 6148: 94000000 bl 0 <mutex_lock> 614c: f8420f22 ldr x2, [x25, #32]! <-- offset 0x44 ^^^ This is 0x6108 + offset 0x44 from the beginning of sdw_stream_add_slave() where data abort happens. wsa881x_hw_params() is called with stream = NULL and passes it further in register x4 (5th argu ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix null-ptr-deref in target_alloc_device() There is a null-ptr-deref issue reported by KASAN: BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod] ... kasan_report+0xb9/0xf0 target_alloc_device+0xbc4/0xbe0 [target_core_mod] core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod] target_core_init_configfs+0x205/0x420 [target_core_mod] do_one_initcall+0xdd/0x4e0 ... entry_SYSCALL_64_after_hwframe+0x76/0x7e In target_alloc_device(), if allocing memory for dev queues fails, then dev will be freed by dev->transport->free_device(), but dev->transport is not initialized at that time, which will lead to a null pointer reference problem. Fixing this bug by freeing dev with hba->backend->ops->free_device().

In the Linux kernel, the following vulnerability has been resolved: ASoC: stm32: spdifrx: fix dma channel release in stm32_spdifrx_remove In case of error when requesting ctrl_chan DMA channel, ctrl_chan is not null. So the release of the dma channel leads to the following issue: [ 4.879000] st,stm32-spdifrx 500d0000.audio-controller: dma_request_slave_channel error -19 [ 4.888975] Unable to handle kernel NULL pointer dereference at virtual address 000000000000003d [...] [ 5.096577] Call trace: [ 5.099099] dma_release_channel+0x24/0x100 [ 5.103235] stm32_spdifrx_remove+0x24/0x60 [snd_soc_stm32_spdifrx] [ 5.109494] stm32_spdifrx_probe+0x320/0x4c4 [snd_soc_stm32_spdifrx] To avoid this issue, release channel only if the pointer is valid.

In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix UMR pd cleanup on error flow of driver init The cited commit moves the pd allocation from function mlx5r_umr_resource_cleanup() to a new function mlx5r_umr_cleanup(). So the fix in commit [1] is broken. In error flow, will hit panic [2]. Fix it by checking pd pointer to avoid panic if it is NULL; [1] RDMA/mlx5: Fix UMR cleanup on error flow of driver init [2] [ 347.567063] infiniband mlx5_0: Couldn't register device with driver model [ 347.591382] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 347.593438] #PF: supervisor read access in kernel mode [ 347.595176] #PF: error_code(0x0000) - not-present page [ 347.596962] PGD 0 P4D 0 [ 347.601361] RIP: 0010:ib_dealloc_pd_user+0x12/0xc0 [ib_core] [ 347.604171] RSP: 0018:ffff888106293b10 EFLAGS: 00010282 [ 347.604834] RAX: 0000000000000000 RBX: 000000000000000e RCX: 0000000000000000 [ 347.605672] RDX: ffff888106293ad0 RSI: 0000000000000000 RDI: 0000000000000000 [ 347.606529] RBP: 0000000000000000 R08: ffff888106293ae0 R09: ffff888106293ae0 [ 347.607379] R10: 0000000000000a06 R11: 0000000000000000 R12: 0000000000000000 [ 347.608224] R13: ffffffffa0704dc0 R14: 0000000000000001 R15: 0000000000000001 [ 347.609067] FS: 00007fdc720cd9c0(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000 [ 347.610094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 347.610727] CR2: 0000000000000020 CR3: 0000000103012003 CR4: 0000000000370eb0 [ 347.611421] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 347.612113] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 347.612804] Call Trace: [ 347.613130] <TASK> [ 347.613417] ? __die+0x20/0x60 [ 347.613793] ? page_fault_oops+0x150/0x3e0 [ 347.614243] ? free_msg+0x68/0x80 [mlx5_core] [ 347.614840] ? cmd_exec+0x48f/0x11d0 [mlx5_core] [ 347.615359] ? exc_page_fault+0x74/0x130 [ 347.615808] ? asm_exc_page_fault+0x22/0x30 [ 347.616273] ? ib_dealloc_pd_user+0x12/0xc0 [ib_core] [ 347.616801] mlx5r_umr_cleanup+0x23/0x90 [mlx5_ib] [ 347.617365] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x36/0x40 [mlx5_ib] [ 347.618025] __mlx5_ib_add+0x96/0xd0 [mlx5_ib] [ 347.618539] mlx5r_probe+0xe9/0x310 [mlx5_ib] [ 347.619032] ? kernfs_add_one+0x107/0x150 [ 347.619478] ? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib] [ 347.619984] auxiliary_bus_probe+0x3e/0x90 [ 347.620448] really_probe+0xc5/0x3a0 [ 347.620857] __driver_probe_device+0x80/0x160 [ 347.621325] driver_probe_device+0x1e/0x90 [ 347.621770] __driver_attach+0xec/0x1c0 [ 347.622213] ? __device_attach_driver+0x100/0x100 [ 347.622724] bus_for_each_dev+0x71/0xc0 [ 347.623151] bus_add_driver+0xed/0x240 [ 347.623570] driver_register+0x58/0x100 [ 347.623998] __auxiliary_driver_register+0x6a/0xc0 [ 347.624499] ? driver_register+0xae/0x100 [ 347.624940] ? 0xffffffffa0893000 [ 347.625329] mlx5_ib_init+0x16a/0x1e0 [mlx5_ib] [ 347.625845] do_one_initcall+0x4a/0x2a0 [ 347.626273] ? gcov_event+0x2e2/0x3a0 [ 347.626706] do_init_module+0x8a/0x260 [ 347.627126] init_module_from_file+0x8b/0xd0 [ 347.627596] __x64_sys_finit_module+0x1ca/0x2f0 [ 347.628089] do_syscall_64+0x4c/0x100

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 On a system with a GICv3, if a guest hasn't been configured with GICv3 and that the host is not capable of GICv2 emulation, a write to any of the ICC_*SGI*_EL1 registers is trapped to EL2. We therefore try to emulate the SGI access, only to hit a NULL pointer as no private interrupt is allocated (no GIC, remember?). The obvious fix is to give the guest what it deserves, in the shape of a UNDEF exception.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated.

In the Linux kernel, the following vulnerability has been resolved: net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool() Clang static checker (scan-build) warning: net/ethtool/ioctl.c:line 2233, column 2 Called function pointer is null (null dereference). Return '-EOPNOTSUPP' when 'ops->get_ethtool_phy_stats' is NULL to fix this typo error.

In the Linux kernel 5.8 through 5.19.x before 5.19.16, local attackers able to inject WLAN frames into the mac80211 stack could cause a NULL pointer dereference denial-of-service attack against the beacon protection of P2P devices.

In the Linux kernel, the following vulnerability has been resolved: bonding: fix xfrm real_dev null pointer dereference We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: pcie: handle randbuf allocation failure The kzalloc() in brcmf_pcie_download_fw_nvram() will return null if the physical memory has run out. As a result, if we use get_random_bytes() to generate random bytes in the randbuf, the null pointer dereference bug will happen. In order to prevent allocation failure, this patch adds a separate function using buffer on kernel stack to generate random bytes in the randbuf, which could prevent the kernel stack from overflow.

A NULL pointer dereference issue was discovered in the Linux kernel in the MPTCP protocol when traversing the subflow list at disconnect time. A local user could use this flaw to potentially crash the system causing a denial of service.

A NULL pointer dereference issue was discovered in the Linux kernel in io_files_update_with_index_alloc. A local user could use this flaw to potentially crash the system causing a denial of service.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip Recompute DSC Params if no Stream on Link [why] Encounter NULL pointer dereference uner mst + dsc setup. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 [how] dsc recompute should be skipped if no mode change detected on the new request. If detected, keep checking whether the stream is already on current state or not.

In the Linux kernel, the following vulnerability has been resolved: fpga: manager: add owner module and take its refcount The current implementation of the fpga manager assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the manager if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_manager struct and use it to take the module's refcount. Modify the functions for registering the manager to take an additional owner module parameter and rename them to avoid conflicts. Use the old function names for helper macros that automatically set the module that registers the manager as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a manager without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga manager. Other changes: opportunistically move put_device() from __fpga_mgr_get() to fpga_mgr_get() and of_fpga_mgr_get() to improve code clarity since the manager device is taken in these functions.

kernel/trace/ftrace.c in the Linux kernel before 2.6.35.5, when debugfs is enabled, does not properly handle interaction between mutex possession and llseek operations, which allows local users to cause a denial of service (NULL pointer dereference and outage of all function tracing files) via an lseek call on a file descriptor associated with the set_ftrace_filter file.

In the Linux kernel, the following vulnerability has been resolved: spi: fix null pointer dereference within spi_sync If spi_sync() is called with the non-empty queue and the same spi_message is then reused, the complete callback for the message remains set while the context is cleared, leading to a null pointer dereference when the callback is invoked from spi_finalize_current_message(). With function inlining disabled, the call stack might look like this: _raw_spin_lock_irqsave from complete_with_flags+0x18/0x58 complete_with_flags from spi_complete+0x8/0xc spi_complete from spi_finalize_current_message+0xec/0x184 spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474 spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230 __spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4 __spi_transfer_message_noqueue from __spi_sync+0x204/0x248 __spi_sync from spi_sync+0x24/0x3c spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd] mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154 _regmap_raw_read from _regmap_bus_read+0x44/0x70 _regmap_bus_read from _regmap_read+0x60/0xd8 _regmap_read from regmap_read+0x3c/0x5c regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd] mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd] mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x118/0x1f4 irq_thread from kthread+0xd8/0xf4 kthread from ret_from_fork+0x14/0x28 Fix this by also setting message->complete to NULL when the transfer is complete.

A null pointer dereference issue was discovered in fs/io_uring.c in the Linux kernel before 5.15.62. A local user could use this flaw to crash the system or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: fou: Fix null-ptr-deref in GRO. We observed a null-ptr-deref in fou_gro_receive() while shutting down a host. [0] The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol in struct fou. When fou_release() is called due to netns dismantle or explicit tunnel teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data. Then, the tunnel socket is destroyed after a single RCU grace period. So, in-flight udp4_gro_receive() could find the socket and execute the FOU GRO handler, where sk->sk_user_data could be NULL. Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL checks in FOU GRO handlers. [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0 SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1 Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017 RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou] Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42 RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010 RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08 RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002 R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400 R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0 FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? no_context (arch/x86/mm/fault.c:752) ? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483) ? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571) ? fou_gro_receive (net/ipv4/fou.c:233) [fou] udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559) udp4_gro_receive (net/ipv4/udp_offload.c:604) inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7)) dev_gro_receive (net/core/dev.c:6035 (discriminator 4)) napi_gro_receive (net/core/dev.c:6170) ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena] ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena] napi_poll (net/core/dev.c:6847) net_rx_action (net/core/dev.c:6917) __do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299) asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809) </IRQ> do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77) irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435) common_interrupt (arch/x86/kernel/irq.c:239) asm_common_interrupt (arch/x86/include/asm/idtentry.h:626) RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575) Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246 RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900 RDX: ffff93daee800000 RSI: ffff93d ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm: prevent derefencing NULL ptr in pfn_section_valid() Commit 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage") changed pfn_section_valid() to add a READ_ONCE() call around "ms->usage" to fix a race with section_deactivate() where ms->usage can be cleared. The READ_ONCE() call, by itself, is not enough to prevent NULL pointer dereference. We need to check its value before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe In function pci1xxxx_spi_probe, there is a potential null pointer that may be caused by a failed memory allocation by the function devm_kzalloc. Hence, a null pointer check needs to be added to prevent null pointer dereferencing later in the code. To fix this issue, spi_bus->spi_int[iter] should be checked. The memory allocated by devm_kzalloc will be automatically released, so just directly return -ENOMEM without worrying about memory leaks.

In the Linux kernel, the following vulnerability has been resolved: net: phy: phy_device: Prevent nullptr exceptions on ISR If phydev->irq is set unconditionally, check for valid interrupt handler or fall back to polling mode to prevent nullptr exceptions in interrupt service routine.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Use mlx5_ipsec_rx_status_destroy to correctly delete status rules rx_create no longer allocates a modify_hdr instance that needs to be cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer dereference. A leak in the rules also previously occurred since there are now two rules populated related to status. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 109907067 P4D 109907067 PUD 116890067 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70 <snip> Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x24/0x70 ? page_fault_oops+0x15f/0x430 ? free_to_partial_list.constprop.0+0x79/0x150 ? do_user_addr_fault+0x2c9/0x5c0 ? exc_page_fault+0x63/0x110 ? asm_exc_page_fault+0x27/0x30 ? mlx5_modify_header_dealloc+0xd/0x70 rx_create+0x374/0x590 rx_add_rule+0x3ad/0x500 ? rx_add_rule+0x3ad/0x500 ? mlx5_cmd_exec+0x2c/0x40 ? mlx5_create_ipsec_obj+0xd6/0x200 mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0 mlx5e_xfrm_add_state+0x426/0xc00 <snip>

In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Fix null pointer dereference on error If the ata_port_alloc() call in ata_host_alloc() fails, ata_host_release() will get called. However, the code in ata_host_release() tries to free ata_port struct members unconditionally, which can lead to the following: BUG: unable to handle page fault for address: 0000000000003990 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 594 Comm: (udev-worker) Not tainted 6.10.0-rc5 #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:ata_host_release.cold+0x2f/0x6e [libata] Code: e4 4d 63 f4 44 89 e2 48 c7 c6 90 ad 32 c0 48 c7 c7 d0 70 33 c0 49 83 c6 0e 41 RSP: 0018:ffffc90000ebb968 EFLAGS: 00010246 RAX: 0000000000000041 RBX: ffff88810fb52e78 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88813b3218c0 RDI: ffff88813b3218c0 RBP: ffff88810fb52e40 R08: 0000000000000000 R09: 6c65725f74736f68 R10: ffffc90000ebb738 R11: 73692033203a746e R12: 0000000000000004 R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000006 FS: 00007f6cc55b9980(0000) GS:ffff88813b300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000003990 CR3: 00000001122a2000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? ata_host_release.cold+0x2f/0x6e [libata] ? ata_host_release.cold+0x2f/0x6e [libata] release_nodes+0x35/0xb0 devres_release_group+0x113/0x140 ata_host_alloc+0xed/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Do not access ata_port struct members unconditionally.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Fix null ptr deref in btintel_read_version If hci_cmd_sync_complete() is triggered and skb is NULL, then hdev->req_skb is NULL, which will cause this issue.

In the Linux kernel, the following vulnerability has been resolved: aio: Fix null ptr deref in aio_complete() wakeup list_del_init_careful() needs to be the last access to the wait queue entry - it effectively unlocks access. Previously, finish_wait() would see the empty list head and skip taking the lock, and then we'd return - but the completion path would still attempt to do the wakeup after the task_struct pointer had been overwritten.

In the Linux kernel, the following vulnerability has been resolved: io_uring: check for non-NULL file pointer in io_file_can_poll() In earlier kernels, it was possible to trigger a NULL pointer dereference off the forced async preparation path, if no file had been assigned. The trace leading to that looks as follows: BUG: kernel NULL pointer dereference, address: 00000000000000b0 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 67 PID: 1633 Comm: buf-ring-invali Not tainted 6.8.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 2/2/2022 RIP: 0010:io_buffer_select+0xc3/0x210 Code: 00 00 48 39 d1 0f 82 ae 00 00 00 48 81 4b 48 00 00 01 00 48 89 73 70 0f b7 50 0c 66 89 53 42 85 ed 0f 85 d2 00 00 00 48 8b 13 <48> 8b 92 b0 00 00 00 48 83 7a 40 00 0f 84 21 01 00 00 4c 8b 20 5b RSP: 0018:ffffb7bec38c7d88 EFLAGS: 00010246 RAX: ffff97af2be61000 RBX: ffff97af234f1700 RCX: 0000000000000040 RDX: 0000000000000000 RSI: ffff97aecfb04820 RDI: ffff97af234f1700 RBP: 0000000000000000 R08: 0000000000200030 R09: 0000000000000020 R10: ffffb7bec38c7dc8 R11: 000000000000c000 R12: ffffb7bec38c7db8 R13: ffff97aecfb05800 R14: ffff97aecfb05800 R15: ffff97af2be5e000 FS: 00007f852f74b740(0000) GS:ffff97b1eeec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b0 CR3: 000000016deab005 CR4: 0000000000370ef0 Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x14d/0x420 ? do_user_addr_fault+0x61/0x6a0 ? exc_page_fault+0x6c/0x150 ? asm_exc_page_fault+0x22/0x30 ? io_buffer_select+0xc3/0x210 __io_import_iovec+0xb5/0x120 io_readv_prep_async+0x36/0x70 io_queue_sqe_fallback+0x20/0x260 io_submit_sqes+0x314/0x630 __do_sys_io_uring_enter+0x339/0xbc0 ? __do_sys_io_uring_register+0x11b/0xc50 ? vm_mmap_pgoff+0xce/0x160 do_syscall_64+0x5f/0x180 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x55e0a110a67e Code: ba cc 00 00 00 45 31 c0 44 0f b6 92 d0 00 00 00 31 d2 41 b9 08 00 00 00 41 83 e2 01 41 c1 e2 04 41 09 c2 b8 aa 01 00 00 0f 05 <c3> 90 89 30 eb a9 0f 1f 40 00 48 8b 42 20 8b 00 a8 06 75 af 85 f6 because the request is marked forced ASYNC and has a bad file fd, and hence takes the forced async prep path. Current kernels with the request async prep cleaned up can no longer hit this issue, but for ease of backporting, let's add this safety check in here too as it really doesn't hurt. For both cases, this will inevitably end with a CQE posted with -EBADF.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Assign dummy when codec not specified for a DAI link MediaTek sound card drivers are checking whether a DAI link is present and used on a board to assign the correct parameters and this is done by checking the codec DAI names at probe time. If no real codec is present, assign the dummy codec to the DAI link to avoid NULL pointer during string comparison.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where an unprivileged regular user can cause a null-pointer dereference, which may lead to denial of service.

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where an unprivileged user can cause a null-pointer dereference, which may lead to denial of service.

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a local user with basic capabilities can cause a null-pointer dereference, which may lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: driver core: Fix a potential null-ptr-deref in module_add_driver() Inject fault while probing of-fpga-region, if kasprintf() fails in module_add_driver(), the second sysfs_remove_link() in exit path will cause null-ptr-deref as below because kernfs_name_hash() will call strlen() with NULL driver_name. Fix it by releasing resources based on the exit path sequence. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfffffc000000000] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: of_fpga_region(+) fpga_region fpga_bridge cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: of_fpga_region] CPU: 2 UID: 0 PID: 2036 Comm: modprobe Not tainted 6.11.0-rc2-g6a0e38264012 #295 Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : strlen+0x24/0xb0 lr : kernfs_name_hash+0x1c/0xc4 sp : ffffffc081f97380 x29: ffffffc081f97380 x28: ffffffc081f97b90 x27: ffffff80c821c2a0 x26: ffffffedac0be418 x25: 0000000000000000 x24: ffffff80c09d2000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000001840 x17: 0000000000000000 x16: 0000000000000000 x15: 1ffffff8103f2e42 x14: 00000000f1f1f1f1 x13: 0000000000000004 x12: ffffffb01812d61d x11: 1ffffff01812d61c x10: ffffffb01812d61c x9 : dfffffc000000000 x8 : 0000004fe7ed29e4 x7 : ffffff80c096b0e7 x6 : 0000000000000001 x5 : ffffff80c096b0e0 x4 : 1ffffffdb990efa2 x3 : 0000000000000000 x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000000 Call trace: strlen+0x24/0xb0 kernfs_name_hash+0x1c/0xc4 kernfs_find_ns+0x118/0x2e8 kernfs_remove_by_name_ns+0x80/0x100 sysfs_remove_link+0x74/0xa8 module_add_driver+0x278/0x394 bus_add_driver+0x1f0/0x43c driver_register+0xf4/0x3c0 __platform_driver_register+0x60/0x88 of_fpga_region_init+0x20/0x1000 [of_fpga_region] do_one_initcall+0x110/0x788 do_init_module+0x1dc/0x5c8 load_module+0x3c38/0x4cac init_module_from_file+0xd4/0x128 idempotent_init_module+0x2cc/0x528 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x48/0xb8 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: f2fbffe1 a90157f4 12000802 aa0003f5 (38e16861) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception

An issue was discovered in the Linux kernel through 5.16-rc6. uapi_finalize in drivers/infiniband/core/uverbs_uapi.c lacks check of kmalloc_array().

An issue was discovered in the Linux kernel through 5.16-rc6. ef100_update_stats in drivers/net/ethernet/sfc/ef100_nic.c lacks check of the return value of kmalloc().

An issue was discovered in the Linux kernel through 5.16-rc6. mtk_vcodec_fw_vpu_init in drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c lacks check of the return value of devm_kzalloc() and will cause the null pointer dereference.

An issue was discovered in the Linux kernel through 5.16-rc6. _rtw_init_xmit_priv in drivers/staging/r8188eu/core/rtw_xmit.c lacks check of the return value of rtw_alloc_hwxmits() and will cause the null pointer dereference.

An issue was discovered in the Linux kernel through 5.16-rc6. lkdtm_ARRAY_BOUNDS in drivers/misc/lkdtm/bugs.c lacks check of the return value of kmalloc() and will cause the null pointer dereference.

An issue was discovered in the Linux kernel through 5.16-rc6. imx_register_uart_clocks in drivers/clk/imx/clk.c lacks check of the return value of kcalloc() and will cause the null pointer dereference.

An issue was discovered in the Linux kernel through 5.16-rc6. free_charger_irq() in drivers/power/supply/wm8350_power.c lacks free of WM8350_IRQ_CHG_FAST_RDY, which is registered in wm8350_init_charger().

An issue was discovered in the Linux kernel through 5.16-rc6. amvdec_set_canvases in drivers/staging/media/meson/vdec/vdec_helpers.c lacks check of the return value of kzalloc() and will cause the null pointer dereference.

An issue was discovered in the Linux kernel through 5.16-rc6. There is a lack of check after calling vzalloc() and lack of free after allocation in drivers/media/test-drivers/vidtv/vidtv_s302m.c.

In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe() In the prueth_probe() function, if one of the calls to emac_phy_connect() fails due to of_phy_connect() returning NULL, then the subsequent call to phy_attached_info() will dereference a NULL pointer. Check the return code of emac_phy_connect and fail cleanly if there is an error.

In the Linux kernel, the following vulnerability has been resolved: net: phy: micrel: Fix potential null pointer dereference In lan8814_get_sig_rx() and lan8814_get_sig_tx() ptp_parse_header() may return NULL as ptp_header due to abnormal packet type or corrupted packet. Fix this bug by adding ptp_header check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is received on HIP08 devices The HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL, but the hardware can receive 1588 messages, and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the access of hdev->ptp->flags will cause a kernel crash: [ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 [ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge] [ 5889.279101] sp : ffff800012c3bc50 [ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040 [ 5889.289927] x27: ffff800009116484 x26: 0000000080007500 [ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000 [ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000 [ 5889.309134] x21: 0000000000000000 x20: ffff204004220080 [ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000 [ 5889.321897] x17: 0000000000000000 x16: 0000000000000000 [ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000 [ 5889.334617] x13: 0000000000000000 x12: 00000000010011df [ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000 [ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d [ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480 [ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000 [ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000 [ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080 [ 5889.378857] Call trace: [ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3] [ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3] [ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3] [ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3] [ 5889.411084] napi_poll+0xcc/0x264 [ 5889.415329] net_rx_action+0xd4/0x21c [ 5889.419911] __do_softirq+0x130/0x358 [ 5889.424484] irq_exit+0x134/0x154 [ 5889.428700] __handle_domain_irq+0x88/0xf0 [ 5889.433684] gic_handle_irq+0x78/0x2c0 [ 5889.438319] el1_irq+0xb8/0x140 [ 5889.442354] arch_cpu_idle+0x18/0x40 [ 5889.446816] default_idle_call+0x5c/0x1c0 [ 5889.451714] cpuidle_idle_call+0x174/0x1b0 [ 5889.456692] do_idle+0xc8/0x160 [ 5889.460717] cpu_startup_entry+0x30/0xfc [ 5889.465523] secondary_start_kernel+0x158/0x1ec [ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80) [ 5889.477950] SMP: stopping secondary CPUs [ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95 [ 5890.522951] Starting crashdump kernel...

In the Linux kernel, the following vulnerability has been resolved: drm/sched: fix null-ptr-deref in init entity The bug can be triggered by sending an amdgpu_cs_wait_ioctl to the AMDGPU DRM driver on any ASICs with valid context. The bug was reported by Joonkyo Jung <joonkyoj@yonsei.ac.kr>. For example the following code: static void Syzkaller2(int fd) { union drm_amdgpu_ctx arg1; union drm_amdgpu_wait_cs arg2; arg1.in.op = AMDGPU_CTX_OP_ALLOC_CTX; ret = drmIoctl(fd, 0x140106442 /* amdgpu_ctx_ioctl */, &arg1); arg2.in.handle = 0x0; arg2.in.timeout = 0x2000000000000; arg2.in.ip_type = AMD_IP_VPE /* 0x9 */; arg2->in.ip_instance = 0x0; arg2.in.ring = 0x0; arg2.in.ctx_id = arg1.out.alloc.ctx_id; drmIoctl(fd, 0xc0206449 /* AMDGPU_WAIT_CS * /, &arg2); } The ioctl AMDGPU_WAIT_CS without previously submitted job could be assumed that the error should be returned, but the following commit 1decbf6bb0b4dc56c9da6c5e57b994ebfc2be3aa modified the logic and allowed to have sched_rq equal to NULL. As a result when there is no job the ioctl AMDGPU_WAIT_CS returns success. The change fixes null-ptr-deref in init entity and the stack below demonstrates the error condition: [ +0.000007] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ +0.007086] #PF: supervisor read access in kernel mode [ +0.005234] #PF: error_code(0x0000) - not-present page [ +0.005232] PGD 0 P4D 0 [ +0.002501] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI [ +0.005034] CPU: 10 PID: 9229 Comm: amd_basic Tainted: G B W L 6.7.0+ #4 [ +0.007797] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.009798] RIP: 0010:drm_sched_entity_init+0x2d3/0x420 [gpu_sched] [ +0.006426] Code: 80 00 00 00 00 00 00 00 e8 1a 81 82 e0 49 89 9c 24 c0 00 00 00 4c 89 ef e8 4a 80 82 e0 49 8b 5d 00 48 8d 7b 28 e8 3d 80 82 e0 <48> 83 7b 28 00 0f 84 28 01 00 00 4d 8d ac 24 98 00 00 00 49 8d 5c [ +0.019094] RSP: 0018:ffffc90014c1fa40 EFLAGS: 00010282 [ +0.005237] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffffffff8113f3fa [ +0.007326] RDX: fffffbfff0a7889d RSI: 0000000000000008 RDI: ffffffff853c44e0 [ +0.007264] RBP: ffffc90014c1fa80 R08: 0000000000000001 R09: fffffbfff0a7889c [ +0.007266] R10: ffffffff853c44e7 R11: 0000000000000001 R12: ffff8881a719b010 [ +0.007263] R13: ffff88810d412748 R14: 0000000000000002 R15: 0000000000000000 [ +0.007264] FS: 00007ffff7045540(0000) GS:ffff8883cc900000(0000) knlGS:0000000000000000 [ +0.008236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.005851] CR2: 0000000000000028 CR3: 000000011912e000 CR4: 0000000000350ef0 [ +0.007175] Call Trace: [ +0.002561] <TASK> [ +0.002141] ? show_regs+0x6a/0x80 [ +0.003473] ? __die+0x25/0x70 [ +0.003124] ? page_fault_oops+0x214/0x720 [ +0.004179] ? preempt_count_sub+0x18/0xc0 [ +0.004093] ? __pfx_page_fault_oops+0x10/0x10 [ +0.004590] ? srso_return_thunk+0x5/0x5f [ +0.004000] ? vprintk_default+0x1d/0x30 [ +0.004063] ? srso_return_thunk+0x5/0x5f [ +0.004087] ? vprintk+0x5c/0x90 [ +0.003296] ? drm_sched_entity_init+0x2d3/0x420 [gpu_sched] [ +0.005807] ? srso_return_thunk+0x5/0x5f [ +0.004090] ? _printk+0xb3/0xe0 [ +0.003293] ? __pfx__printk+0x10/0x10 [ +0.003735] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ +0.005482] ? do_user_addr_fault+0x345/0x770 [ +0.004361] ? exc_page_fault+0x64/0xf0 [ +0.003972] ? asm_exc_page_fault+0x27/0x30 [ +0.004271] ? add_taint+0x2a/0xa0 [ +0.003476] ? drm_sched_entity_init+0x2d3/0x420 [gpu_sched] [ +0.005812] amdgpu_ctx_get_entity+0x3f9/0x770 [amdgpu] [ +0.009530] ? finish_task_switch.isra.0+0x129/0x470 [ +0.005068] ? __pfx_amdgpu_ctx_get_entity+0x10/0x10 [amdgpu] [ +0.010063] ? __kasan_check_write+0x14/0x20 [ +0.004356] ? srso_return_thunk+0x5/0x5f [ +0.004001] ? mutex_unlock+0x81/0xd0 [ +0.003802] ? srso_return_thunk+0x5/0x5f [ +0.004096] amdgpu_cs_wait_ioctl+0xf6/0x270 [amdgpu] [ +0.009355] ? __pfx_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: phy: fix phy_get_internal_delay accessing an empty array The phy_get_internal_delay function could try to access to an empty array in the case that the driver is calling phy_get_internal_delay without defining delay_values and rx-internal-delay-ps or tx-internal-delay-ps is defined to 0 in the device-tree. This will lead to "unable to handle kernel NULL pointer dereference at virtual address 0". To avoid this kernel oops, the test should be delay >= 0. As there is already delay < 0 test just before, the test could only be size == 0.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fixed integer types and null check locations [why]: issues fixed: - comparison with wider integer type in loop condition which can cause infinite loops - pointer dereference before null check

In the Linux kernel, the following vulnerability has been resolved: tracing/timerlat: Move hrtimer_init to timerlat_fd open() Currently, the timerlat's hrtimer is initialized at the first read of timerlat_fd, and destroyed at close(). It works, but it causes an error if the user program open() and close() the file without reading. Here's an example: # echo NO_OSNOISE_WORKLOAD > /sys/kernel/debug/tracing/osnoise/options # echo timerlat > /sys/kernel/debug/tracing/current_tracer # cat <<EOF > ./timerlat_load.py # !/usr/bin/env python3 timerlat_fd = open("/sys/kernel/tracing/osnoise/per_cpu/cpu0/timerlat_fd", 'r') timerlat_fd.close(); EOF # ./taskset -c 0 ./timerlat_load.py <BOOM> BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 2673 Comm: python3 Not tainted 6.6.13-200.fc39.x86_64 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:hrtimer_active+0xd/0x50 Code: 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 57 30 <8b> 42 10 a8 01 74 09 f3 90 8b 42 10 a8 01 75 f7 80 7f 38 00 75 1d RSP: 0018:ffffb031009b7e10 EFLAGS: 00010286 RAX: 000000000002db00 RBX: ffff9118f786db08 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9117a0e64400 RDI: ffff9118f786db08 RBP: ffff9118f786db80 R08: ffff9117a0ddd420 R09: ffff9117804d4f70 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9118f786db08 R13: ffff91178fdd5e20 R14: ffff9117840978c0 R15: 0000000000000000 FS: 00007f2ffbab1740(0000) GS:ffff9118f7840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 00000001b402e000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? srso_alias_return_thunk+0x5/0x7f ? avc_has_extended_perms+0x237/0x520 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? hrtimer_active+0xd/0x50 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x48/0xe0 __fput+0xf5/0x290 __x64_sys_close+0x3d/0x80 do_syscall_64+0x60/0x90 ? srso_alias_return_thunk+0x5/0x7f ? __x64_sys_ioctl+0x72/0xd0 ? srso_alias_return_thunk+0x5/0x7f ? syscall_exit_to_user_mode+0x2b/0x40 ? srso_alias_return_thunk+0x5/0x7f ? do_syscall_64+0x6c/0x90 ? srso_alias_return_thunk+0x5/0x7f ? exit_to_user_mode_prepare+0x142/0x1f0 ? srso_alias_return_thunk+0x5/0x7f ? syscall_exit_to_user_mode+0x2b/0x40 ? srso_alias_return_thunk+0x5/0x7f ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f2ffb321594 Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 cd 0d 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 7d RSP: 002b:00007ffe8d8eef18 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 00007f2ffba4e668 RCX: 00007f2ffb321594 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007ffe8d8eef40 R08: 0000000000000000 R09: 0000000000000000 R10: 55c926e3167eae79 R11: 0000000000000202 R12: 0000000000000003 R13: 00007ffe8d8ef030 R14: 0000000000000000 R15: 00007f2ffba4e668 </TASK> CR2: 0000000000000010 ---[ end trace 0000000000000000 ]--- Move hrtimer_init to timerlat_fd open() to avoid this problem.

In the Linux kernel, the following vulnerability has been resolved: net: phy: qcom: at803x: fix kernel panic with at8031_probe On reworking and splitting the at803x driver, in splitting function of at803x PHYs it was added a NULL dereference bug where priv is referenced before it's actually allocated and then is tried to write to for the is_1000basex and is_fiber variables in the case of at8031, writing on the wrong address. Fix this by correctly setting priv local variable only after at803x_probe is called and actually allocates priv in the phydev struct.