In the Linux kernel, the following vulnerability has been resolved: dccp: fix dccp_v4_err()/dccp_v6_err() again dh->dccph_x is the 9th byte (offset 8) in "struct dccp_hdr", not in the "byte 7" as Jann claimed. We need to make sure the ICMP messages are big enough, using more standard ways (no more assumptions). syzbot reported: BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2681 [inline] BUG: KMSAN: uninit-value in dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 pskb_may_pull_reason include/linux/skbuff.h:2667 [inline] pskb_may_pull include/linux/skbuff.h:2681 [inline] dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94 icmpv6_notify+0x4c7/0x880 net/ipv6/icmp.c:867 icmpv6_rcv+0x19d5/0x30d0 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:304 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:304 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x83b/0x920 tun_get_user+0x564c/0x6940 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6313 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x23cf/0x6940 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:1985 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x15c0 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 4995 Comm: syz-executor153 Not tainted 6.6.0-rc1-syzkaller-00014-ga747acc0b752 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023

In the Linux kernel, the following vulnerability has been resolved: net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path syzbot reported that act_len in kalmia_send_init_packet() is uninitialized when passing it to the first usb_bulk_msg error path. Jiri Pirko noted that it's pointless to pass it in the error path, and that the value that would be printed in the second error path would be the value of act_len from the first call to usb_bulk_msg.[1] With this in mind, let's just not pass act_len to the usb_bulk_msg error paths. 1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/

In the Linux kernel, the following vulnerability has been resolved: net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg syzbot reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554 hub_port_connect drivers/usb/core/hub.c:5208 [inline] hub_port_connect_change drivers/usb/core/hub.c:5348 [inline] port_event drivers/usb/core/hub.c:5494 [inline] hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415 kthread+0x551/0x590 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Local variable ----buf.i87@smsc75xx_bind created at: __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 This issue is caused because usbnet_read_cmd() reads less bytes than requested (zero byte in the reproducer). In this case, 'buf' is not properly filled. This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads less bytes than requested.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix freeing of uninitialized misc IRQ vector When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized.

In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: avoid putting an uninitialized iova_domain The system will crash if we put an uninitialized iova_domain, this could happen when an error occurs before initializing the iova_domain in vdpasim_create(). BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0 ... Call Trace: <TASK> put_iova_domain+0x29/0x220 vdpasim_free+0xd1/0x120 [vdpa_sim] vdpa_release_dev+0x21/0x40 [vdpa] device_release+0x33/0x90 kobject_release+0x63/0x160 vdpasim_create+0x127/0x2a0 [vdpa_sim] vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net] vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa] genl_family_rcv_msg_doit+0x112/0x140 genl_rcv_msg+0xdf/0x1d0 ... So we must make sure the iova_domain is already initialized before put it. In addition, we may get the following warning in this case: WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70 So we must make sure the iova_cache_put() is invoked only if the iova_cache_get() is already invoked. Let's fix it together.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: explicitly clear ioctl input data As seen from a recent syzbot bug report, mistakes in the compat ioctl implementation can lead to uninitialized kernel stack data getting used as input for driver ioctl handlers. The reported bug is now fixed, but it's possible that other related bugs are still present or get added in the future. As the drivers need to check user input already, the possible impact is fairly low, but it might still cause an information leak. To be on the safe side, always clear the entire ioctl buffer before calling the conversion handler functions that are meant to initialize them.

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown() before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the vf2pf_lock is initialized in adf_dev_init(), which can fail and when it fail, the vf2pf_lock is either not initialized or destroyed, a subsequent use of vf2pf_lock will cause issue. To fix this issue, only set this flag if adf_dev_init() returns 0. [ 7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0 [ 7.180345] Call Trace: [ 7.182576] mutex_lock+0xc9/0xd0 [ 7.183257] adf_iov_putmsg+0x118/0x1a0 [intel_qat] [ 7.183541] adf_vf2pf_shutdown+0x4d/0x7b [intel_qat] [ 7.183834] adf_dev_shutdown+0x172/0x2b0 [intel_qat] [ 7.184127] adf_probe+0x5e9/0x600 [qat_dh895xccvf]

In the Linux kernel, the following vulnerability has been resolved: net: zero-initialize tc skb extension on allocation Function skb_ext_add() doesn't initialize created skb extension with any value and leaves it up to the user. However, since extension of type TC_SKB_EXT originally contained only single value tc_skb_ext->chain its users used to just assign the chain value without setting whole extension memory to zero first. This assumption changed when TC_SKB_EXT extension was extended with additional fields but not all users were updated to initialize the new fields which leads to use of uninitialized memory afterwards. UBSAN log: [ 778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28 [ 778.301495] load of value 107 is not a valid value for type '_Bool' [ 778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2 [ 778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 778.307901] Call Trace: [ 778.308680] <IRQ> [ 778.309358] dump_stack+0xbb/0x107 [ 778.310307] ubsan_epilogue+0x5/0x40 [ 778.311167] __ubsan_handle_load_invalid_value.cold+0x43/0x48 [ 778.312454] ? memset+0x20/0x40 [ 778.313230] ovs_flow_key_extract.cold+0xf/0x14 [openvswitch] [ 778.314532] ovs_vport_receive+0x19e/0x2e0 [openvswitch] [ 778.315749] ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch] [ 778.317188] ? create_prof_cpu_mask+0x20/0x20 [ 778.318220] ? arch_stack_walk+0x82/0xf0 [ 778.319153] ? secondary_startup_64_no_verify+0xb0/0xbb [ 778.320399] ? stack_trace_save+0x91/0xc0 [ 778.321362] ? stack_trace_consume_entry+0x160/0x160 [ 778.322517] ? lock_release+0x52e/0x760 [ 778.323444] netdev_frame_hook+0x323/0x610 [openvswitch] [ 778.324668] ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch] [ 778.325950] __netif_receive_skb_core+0x771/0x2db0 [ 778.327067] ? lock_downgrade+0x6e0/0x6f0 [ 778.328021] ? lock_acquire+0x565/0x720 [ 778.328940] ? generic_xdp_tx+0x4f0/0x4f0 [ 778.329902] ? inet_gro_receive+0x2a7/0x10a0 [ 778.330914] ? lock_downgrade+0x6f0/0x6f0 [ 778.331867] ? udp4_gro_receive+0x4c4/0x13e0 [ 778.332876] ? lock_release+0x52e/0x760 [ 778.333808] ? dev_gro_receive+0xcc8/0x2380 [ 778.334810] ? lock_downgrade+0x6f0/0x6f0 [ 778.335769] __netif_receive_skb_list_core+0x295/0x820 [ 778.336955] ? process_backlog+0x780/0x780 [ 778.337941] ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core] [ 778.339613] ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0 [ 778.341033] ? kvm_clock_get_cycles+0x14/0x20 [ 778.342072] netif_receive_skb_list_internal+0x5f5/0xcb0 [ 778.343288] ? __kasan_kmalloc+0x7a/0x90 [ 778.344234] ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core] [ 778.345676] ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core] [ 778.347140] ? __netif_receive_skb_list_core+0x820/0x820 [ 778.348351] ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core] [ 778.349688] ? napi_gro_flush+0x26c/0x3c0 [ 778.350641] napi_complete_done+0x188/0x6b0 [ 778.351627] mlx5e_napi_poll+0x373/0x1b80 [mlx5_core] [ 778.352853] __napi_poll+0x9f/0x510 [ 778.353704] ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core] [ 778.355158] net_rx_action+0x34c/0xa40 [ 778.356060] ? napi_threaded_poll+0x3d0/0x3d0 [ 778.357083] ? sched_clock_cpu+0x18/0x190 [ 778.358041] ? __common_interrupt+0x8e/0x1a0 [ 778.359045] __do_softirq+0x1ce/0x984 [ 778.359938] __irq_exit_rcu+0x137/0x1d0 [ 778.360865] irq_exit_rcu+0xa/0x20 [ 778.361708] common_interrupt+0x80/0xa0 [ 778.362640] </IRQ> [ 778.363212] asm_common_interrupt+0x1e/0x40 [ 778.364204] RIP: 0010:native_safe_halt+0xe/0x10 [ 778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00 [ 778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246 [ 778.370570] RAX ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: hns3: put off calling register_netdev() until client initialize complete Currently, the netdevice is registered before client initializing complete. So there is a timewindow between netdevice available and usable. In this case, if user try to change the channel number or ring param, it may cause the hns3_set_rx_cpu_rmap() being called twice, and report bug. [47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0 [47199.430340] hns3 0000:35:00.0 eth1: already uninitialized [47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1 [47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1 [47200.163524] ------------[ cut here ]------------ [47200.171674] kernel BUG at lib/cpu_rmap.c:142! [47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge] [47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G O 5.11.0-rc3+ #1 [47200.215601] Hardware name: , xxxxxx 02/04/2021 [47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [47200.230188] pc : cpu_rmap_add+0x38/0x40 [47200.237472] lr : irq_cpu_rmap_add+0x84/0x140 [47200.243291] sp : ffff800010e93a30 [47200.247295] x29: ffff800010e93a30 x28: ffff082100584880 [47200.254155] x27: 0000000000000000 x26: 0000000000000000 [47200.260712] x25: 0000000000000000 x24: 0000000000000004 [47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0 [47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680 [47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0 [47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0 [47200.293456] x15: fffffc2082990600 x14: dead000000000122 [47200.300059] x13: ffffffffffffffff x12: 000000000000003e [47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000 [47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700 [47200.319682] x7 : 0000000000000000 x6 : 000000000000003f [47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20 [47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80 [47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004 [47200.346058] Call trace: [47200.349324] cpu_rmap_add+0x38/0x40 [47200.354300] hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3] [47200.362294] hns3_reset_notify_init_enet+0x1cc/0x340 [hns3] [47200.370049] hns3_change_channels+0x40/0xb0 [hns3] [47200.376770] hns3_set_channels+0x12c/0x2a0 [hns3] [47200.383353] ethtool_set_channels+0x140/0x250 [47200.389772] dev_ethtool+0x714/0x23d0 [47200.394440] dev_ioctl+0x4cc/0x640 [47200.399277] sock_do_ioctl+0x100/0x2a0 [47200.404574] sock_ioctl+0x28c/0x470 [47200.409079] __arm64_sys_ioctl+0xb4/0x100 [47200.415217] el0_svc_common.constprop.0+0x84/0x210 [47200.422088] do_el0_svc+0x28/0x34 [47200.426387] el0_svc+0x28/0x70 [47200.431308] el0_sync_handler+0x1a4/0x1b0 [47200.436477] el0_sync+0x174/0x180 [47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000) [47200.448869] ---[ end trace a01efe4ce42e5f34 ]--- The process is like below: excuting hns3_client_init | register_netdev() | hns3_set_channels() | | hns3_set_rx_cpu_rmap() hns3_reset_notify_uninit_enet() | | | quit without calling function | hns3_free_rx_cpu_rmap for flag | HNS3_NIC_STATE_INITED is unset. | | | hns3_reset_notify_init_enet() | | set HNS3_NIC_STATE_INITED call hns3_set_rx_cpu_rmap()-- crash Fix it by calling register_netdev() at the end of function hns3_client_init().

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Do not try to cleanup after cxl_region_setup_targets() fails Commit 5e42bcbc3fef ("cxl/region: decrement ->nr_targets on error in cxl_region_attach()") tried to avoid 'eiw' initialization errors when ->nr_targets exceeded 16, by just decrementing ->nr_targets when cxl_region_setup_targets() failed. Commit 86987c766276 ("cxl/region: Cleanup target list on attach error") extended that cleanup to also clear cxled->pos and p->targets[pos]. The initialization error was incidentally fixed separately by: Commit 8d4285425714 ("cxl/region: Fix port setup uninitialized variable warnings") which was merged a few days after 5e42bcbc3fef. But now the original cleanup when cxl_region_setup_targets() fails prevents endpoint and switch decoder resources from being reused: 1) the cleanup does not set the decoder's region to NULL, which results in future dpa_size_store() calls returning -EBUSY 2) the decoder is not properly freed, which results in future commit errors associated with the upstream switch Now that the initialization errors were fixed separately, the proper cleanup for this case is to just return immediately. Then the resources associated with this target get cleanup up as normal when the failed region is deleted. The ->nr_targets decrement in the error case also helped prevent a p->targets[] array overflow, so add a new check to prevent against that overflow. Tested by trying to create an invalid region for a 2 switch * 2 endpoint topology, and then following up with creating a valid region.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix deinitialization of firmware resources Currently, in ath11k_ahb_fw_resources_init(), iommu domain mapping is done only for the chipsets having fixed firmware memory. Also, for such chipsets, mapping is done only if it does not have TrustZone support. During deinitialization, only if TrustZone support is not there, iommu is unmapped back. However, for non fixed firmware memory chipsets, TrustZone support is not there and this makes the condition check to true and it tries to unmap the memory which was not mapped during initialization. This leads to the following trace - [ 83.198790] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 83.259537] Modules linked in: ath11k_ahb ath11k qmi_helpers .. snip .. [ 83.280286] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 83.287228] pc : __iommu_unmap+0x30/0x140 [ 83.293907] lr : iommu_unmap+0x5c/0xa4 [ 83.298072] sp : ffff80000b3abad0 .. snip .. [ 83.369175] Call trace: [ 83.376282] __iommu_unmap+0x30/0x140 [ 83.378541] iommu_unmap+0x5c/0xa4 [ 83.382360] ath11k_ahb_fw_resource_deinit.part.12+0x2c/0xac [ath11k_ahb] [ 83.385666] ath11k_ahb_free_resources+0x140/0x17c [ath11k_ahb] [ 83.392521] ath11k_ahb_shutdown+0x34/0x40 [ath11k_ahb] [ 83.398248] platform_shutdown+0x20/0x2c [ 83.403455] device_shutdown+0x16c/0x1c4 [ 83.407621] kernel_restart_prepare+0x34/0x3c [ 83.411529] kernel_restart+0x14/0x74 [ 83.415781] __do_sys_reboot+0x1c4/0x22c [ 83.419427] __arm64_sys_reboot+0x1c/0x24 [ 83.423420] invoke_syscall+0x44/0xfc [ 83.427326] el0_svc_common.constprop.3+0xac/0xe8 [ 83.430974] do_el0_svc+0xa0/0xa8 [ 83.435659] el0_svc+0x1c/0x44 [ 83.438957] el0t_64_sync_handler+0x60/0x144 [ 83.441910] el0t_64_sync+0x15c/0x160 [ 83.446343] Code: aa0103f4 f9400001 f90027a1 d2800001 (f94006a0) [ 83.449903] ---[ end trace 0000000000000000 ]--- This can be reproduced by probing an AHB chipset which is not having a fixed memory region. During reboot (or rmmod) trace can be seen. Fix this issue by adding a condition check on firmware fixed memory hw_param as done in the counter initialization function. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix error unwind in rxe_create_qp() In the function rxe_create_qp(), rxe_qp_from_init() is called to initialize qp, internally things like the spin locks are not setup until rxe_qp_init_req(). If an error occures before this point then the unwind will call rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task() which will oops when trying to access the uninitialized spinlock. Move the spinlock initializations earlier before any failures.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix the msg->req tlv len check in tipc_nl_compat_name_table_dump_header This is a follow-up for commit 974cb0e3e7c9 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump") where it should have type casted sizeof(..) to int to work when TLV_GET_DATA_LEN() returns a negative value. syzbot reported a call trace because of it: BUG: KMSAN: uninit-value in ... tipc_nl_compat_name_table_dump+0x841/0xea0 net/tipc/netlink_compat.c:934 __tipc_nl_compat_dumpit+0xab2/0x1320 net/tipc/netlink_compat.c:238 tipc_nl_compat_dumpit+0x991/0xb50 net/tipc/netlink_compat.c:321 tipc_nl_compat_recv+0xb6e/0x1640 net/tipc/netlink_compat.c:1324 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x103f/0x1260 net/netlink/genetlink.c:792 netlink_rcv_skb+0x3a5/0x6c0 net/netlink/af_netlink.c:2501 genl_rcv+0x3c/0x50 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline]

In the Linux kernel, the following vulnerability has been resolved: kcm: fix strp_init() order and cleanup strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away.

In the Linux kernel, the following vulnerability has been resolved: net: mdio: unexport __init-annotated mdio_bus_init() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean)

In the Linux kernel, the following vulnerability has been resolved: net: hsr: avoid potential out-of-bound access in fill_frame_info() syzbot is able to feed a packet with 14 bytes, pretending it is a vlan one. Since fill_frame_info() is relying on skb->mac_len already, extend the check to cover this case. BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:709 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 fill_frame_info net/hsr/hsr_forward.c:709 [inline] hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 hsr_dev_xmit+0x2f0/0x350 net/hsr/hsr_device.c:235 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3606 __dev_queue_xmit+0x366a/0x57d0 net/core/dev.c:4434 dev_queue_xmit include/linux/netdevice.h:3168 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x91ae/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] alloc_skb_with_frags+0xc8/0xd00 net/core/skbuff.c:6612 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2881 packet_alloc_skb net/packet/af_packet.c:2995 [inline] packet_snd net/packet/af_packet.c:3089 [inline] packet_sendmsg+0x74c6/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl() syzbot reports a KMSAN kernel-infoleak in `do_insn_ioctl()`. A kernel buffer is allocated to hold `insn->n` samples (each of which is an `unsigned int`). For some instruction types, `insn->n` samples are copied back to user-space, unless an error code is being returned. The problem is that not all the instruction handlers that need to return data to userspace fill in the whole `insn->n` samples, so that there is an information leak. There is a similar syzbot report for `do_insnlist_ioctl()`, although it does not have a reproducer for it at the time of writing. One culprit is `insn_rw_emulate_bits()` which is used as the handler for `INSN_READ` or `INSN_WRITE` instructions for subdevices that do not have a specific handler for that instruction, but do have an `INSN_BITS` handler. For `INSN_READ` it only fills in at most 1 sample, so if `insn->n` is greater than 1, the remaining `insn->n - 1` samples copied to userspace will be uninitialized kernel data. Another culprit is `vm80xx_ai_insn_read()` in the "vm80xx" driver. It never returns an error, even if it fails to fill the buffer. Fix it in `do_insn_ioctl()` and `do_insnlist_ioctl()` by making sure that uninitialized parts of the allocated buffer are zeroed before handling each instruction. Thanks to Arnaud Lecomte for their fix to `do_insn_ioctl()`. That fix replaced the call to `kmalloc_array()` with `kcalloc()`, but it is not always necessary to clear the whole buffer.

In the Linux kernel, the following vulnerability has been resolved: arm64: kexec: initialize kexec_buf struct in load_other_segments() Patch series "kexec: Fix invalid field access". The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used. An initial fix was already landed for arm64[0], and this patchset fixes the problem on the remaining arm64 code and on riscv, as raised by Mark. Discussions about this problem could be found at[1][2]. This patch (of 3): The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used.

In the Linux kernel, the following vulnerability has been resolved: iio: accel: sca3300: fix uninitialized iio scan data Fix potential leak of uninitialized stack data to userspace by ensuring that the `channels` array is zeroed before use.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix oops due to uninitialised variable Fix smb3_init_transform_rq() to initialise buffer to NULL before calling netfs_alloc_folioq_buffer() as netfs assumes it can append to the buffer it is given. Setting it to NULL means it should start a fresh buffer, but the value is currently undefined.

In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix release of uninitialized resources on error path The commit in the fixes tag made sure that mlx5_vdpa_free() is the single entrypoint for removing the vdpa device resources added in mlx5_vdpa_dev_add(), even in the cleanup path of mlx5_vdpa_dev_add(). This means that all functions from mlx5_vdpa_free() should be able to handle uninitialized resources. This was not the case though: mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx() were not able to do so. This caused the splat below when adding a vdpa device without a MAC address. This patch fixes these remaining issues: - Makes mlx5_vdpa_destroy_mr_resources() return early if called on uninitialized resources. - Moves mlx5_cmd_init_async_ctx() early on during device addition because it can't fail. This means that mlx5_cmd_cleanup_async_ctx() also can't fail. To mirror this, move the call site of mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free(). An additional comment was added in mlx5_vdpa_free() to document the expectations of functions called from this context. Splat: mlx5_core 0000:b5:03.2: mlx5_vdpa_dev_add:3950:(pid 2306) warning: No mac address provisioned? ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2306 at kernel/workqueue.c:4207 __flush_work+0x9a/0xb0 [...] Call Trace: <TASK> ? __try_to_del_timer_sync+0x61/0x90 ? __timer_delete_sync+0x2b/0x40 mlx5_vdpa_destroy_mr_resources+0x1c/0x40 [mlx5_vdpa] mlx5_vdpa_free+0x45/0x160 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_cleanup+0x37/0x130 mlx5_vdpa_dev_add+0x327/0x890 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x2c1/0x4d0 [vdpa] genl_family_rcv_msg_doit+0xd8/0x130 genl_family_rcv_msg+0x14b/0x220 ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa] genl_rcv_msg+0x47/0xa0 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x53/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x27b/0x3b0 netlink_sendmsg+0x1f7/0x430 __sys_sendto+0x1fa/0x210 ? ___pte_offset_map+0x17/0x160 ? next_uptodate_folio+0x85/0x2b0 ? percpu_counter_add_batch+0x51/0x90 ? filemap_map_pages+0x515/0x660 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x7b/0x2c0 ? do_read_fault+0x108/0x220 ? do_pte_missing+0x14a/0x3e0 ? __handle_mm_fault+0x321/0x730 ? count_memcg_events+0x13f/0x180 ? handle_mm_fault+0x1fb/0x2d0 ? do_user_addr_fault+0x20c/0x700 ? syscall_exit_work+0x104/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0c25b0feca [...] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: sctp: initialize more fields in sctp_v6_from_sk() syzbot found that sin6_scope_id was not properly initialized, leading to undefined behavior. Clear sin6_scope_id and sin6_flowinfo. BUG: KMSAN: uninit-value in __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 sctp_inet6_cmp_addr+0x4f2/0x510 net/sctp/ipv6.c:983 sctp_bind_addr_conflict+0x22a/0x3b0 net/sctp/bind_addr.c:390 sctp_get_port_local+0x21eb/0x2440 net/sctp/socket.c:8452 sctp_get_port net/sctp/socket.c:8523 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x710/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930 x64_sys_call+0x271d/0x3e20 arch/x86/include/generated/asm/syscalls_64.h:51 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable addr.i.i created at: sctp_get_port net/sctp/socket.c:8515 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x650/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930

In the Linux kernel, the following vulnerability has been resolved: bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls When sending plaintext data, we initially calculated the corresponding ciphertext length. However, if we later reduced the plaintext data length via socket policy, we failed to recalculate the ciphertext length. This results in transmitting buffers containing uninitialized data during ciphertext transmission. This causes uninitialized bytes to be appended after a complete "Application Data" packet, leading to errors on the receiving end when parsing TLS record.

In the Linux kernel, the following vulnerability has been resolved: staging: gpib: fix unset padding field copy back to userspace The introduction of a padding field in the gpib_board_info_ioctl is showing up as initialized data on the stack frame being copyied back to userspace in function board_info_ioctl. The simplest fix is to initialize the entire struct to zero to ensure all unassigned padding fields are zero'd before being copied back to userspace.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject TDLS operations when station is not associated syzbot triggered a WARN in ieee80211_tdls_oper() by sending NL80211_TDLS_ENABLE_LINK immediately after NL80211_CMD_CONNECT, before association completed and without prior TDLS setup. This left internal state like sdata->u.mgd.tdls_peer uninitialized, leading to a WARN_ON() in code paths that assumed it was valid. Reject the operation early if not in station mode or not associated.

In the Linux kernel, the following vulnerability has been resolved: mISDN: hfcpci: Fix warning when deleting uninitialized timer With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update.

In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails Have nvmet_req_init() and req->execute() complete failed commands. Description of the problem: nvmet_req_init() calls __nvmet_req_complete() internally upon failure, e.g., unsupported opcode, which calls the "queue_response" callback, this results in nvmet_pci_epf_queue_response() being called, which will call nvmet_pci_epf_complete_iod() if data_len is 0 or if dma_dir is different from DMA_TO_DEVICE. This results in a double completion as nvmet_pci_epf_exec_iod_work() also calls nvmet_pci_epf_complete_iod() when nvmet_req_init() fails. Steps to reproduce: On the host send a command with an unsupported opcode with nvme-cli, For example the admin command "security receive" $ sudo nvme security-recv /dev/nvme0n1 -n1 -x4096 This triggers a double completion as nvmet_req_init() fails and nvmet_pci_epf_queue_response() is called, here iod->dma_dir is still in the default state of "DMA_NONE" as set by default in nvmet_pci_epf_alloc_iod(), so nvmet_pci_epf_complete_iod() is called. Because nvmet_req_init() failed nvmet_pci_epf_complete_iod() is also called in nvmet_pci_epf_exec_iod_work() leading to a double completion. This not only sends two completions to the host but also corrupts the state of the PCI NVMe target leading to kernel oops. This patch lets nvmet_req_init() and req->execute() complete all failed commands, and removes the double completion case in nvmet_pci_epf_exec_iod_work() therefore fixing the edge cases where double completions occurred.

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Set merge to zero early in af_alg_sendmsg If an error causes af_alg_sendmsg to abort, ctx->merge may contain a garbage value from the previous loop. This may then trigger a crash on the next entry into af_alg_sendmsg when it attempts to do a merge that can't be done. Fix this by setting ctx->merge to zero near the start of the loop.

In the Linux kernel, the following vulnerability has been resolved: pNFS: Fix uninited ptr deref in block/scsi layout The error occurs on the third attempt to encode extents. When function ext_tree_prepare_commit() reallocates a larger buffer to retry encoding extents, the "layoutupdate_pages" page array is initialized only after the retry loop. But ext_tree_free_commitdata() is called on every iteration and tries to put pages in the array, thus dereferencing uninitialized pointers. An additional problem is that there is no limit on the maximum possible buffer_size. When there are too many extents, the client may create a layoutcommit that is larger than the maximum possible RPC size accepted by the server. During testing, we observed two typical scenarios. First, one memory page for extents is enough when we work with small files, append data to the end of the file, or preallocate extents before writing. But when we fill a new large file without preallocating, the number of extents can be huge, and counting the number of written extents in ext_tree_encode_commit() does not help much. Since this number increases even more between unlocking and locking of ext_tree, the reallocated buffer may not be large enough again and again.

In the Linux kernel, the following vulnerability has been resolved: comedi: Fix use of uninitialized data in insn_rw_emulate_bits() For Comedi `INSN_READ` and `INSN_WRITE` instructions on "digital" subdevices (subdevice types `COMEDI_SUBD_DI`, `COMEDI_SUBD_DO`, and `COMEDI_SUBD_DIO`), it is common for the subdevice driver not to have `insn_read` and `insn_write` handler functions, but to have an `insn_bits` handler function for handling Comedi `INSN_BITS` instructions. In that case, the subdevice's `insn_read` and/or `insn_write` function handler pointers are set to point to the `insn_rw_emulate_bits()` function by `__comedi_device_postconfig()`. For `INSN_WRITE`, `insn_rw_emulate_bits()` currently assumes that the supplied `data[0]` value is a valid copy from user memory. It will at least exist because `do_insnlist_ioctl()` and `do_insn_ioctl()` in "comedi_fops.c" ensure at lease `MIN_SAMPLES` (16) elements are allocated. However, if `insn->n` is 0 (which is allowable for `INSN_READ` and `INSN_WRITE` instructions, then `data[0]` may contain uninitialized data, and certainly contains invalid data, possibly from a different instruction in the array of instructions handled by `do_insnlist_ioctl()`. This will result in an incorrect value being written to the digital output channel (or to the digital input/output channel if configured as an output), and may be reflected in the internal saved state of the channel. Fix it by returning 0 early if `insn->n` is 0, before reaching the code that accesses `data[0]`. Previously, the function always returned 1 on success, but it is supposed to be the number of data samples actually read or written up to `insn->n`, which is 0 in this case.

In the Linux kernel, the following vulnerability has been resolved: pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command the driver might at the least print garbage and at the worst crash when the user runs the "devlink dev info" devlink command. This happens because the stack variable fw_list is not 0 initialized which results in fw_list.num_fw_slots being a garbage value from the stack. Then the driver tries to access fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end of the array. Fix this by initializing the fw_list and by not failing completely if the devcmd fails because other useful information is printed via devlink dev info even if the devcmd fails.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: ep: Update read pointer only after buffer is written Inside mhi_ep_ring_add_element, the read pointer (rd_offset) is updated before the buffer is written, potentially causing race conditions where the host sees an updated read pointer before the buffer is actually written. Updating rd_offset prematurely can lead to the host accessing an uninitialized or incomplete element, resulting in data corruption. Invoke the buffer write before updating rd_offset to ensure the element is fully written before signaling its availability.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Reorder clock handling and power management in probe Reorder the initialization sequence in `usbhs_probe()` to enable runtime PM before accessing registers, preventing potential crashes due to uninitialized clocks. Currently, in the probe path, registers are accessed before enabling the clocks, leading to a synchronous external abort on the RZ/V2H SoC. The problematic call flow is as follows: usbhs_probe() usbhs_sys_clock_ctrl() usbhs_bset() usbhs_write() iowrite16() <-- Register access before enabling clocks Since `iowrite16()` is performed without ensuring the required clocks are enabled, this can lead to access errors. To fix this, enable PM runtime early in the probe function and ensure clocks are acquired before register access, preventing crashes like the following on RZ/V2H: [13.272640] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP [13.280814] Modules linked in: cec renesas_usbhs(+) drm_kms_helper fuse drm backlight ipv6 [13.289088] CPU: 1 UID: 0 PID: 195 Comm: (udev-worker) Not tainted 6.14.0-rc7+ #98 [13.296640] Hardware name: Renesas RZ/V2H EVK Board based on r9a09g057h44 (DT) [13.303834] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [13.310770] pc : usbhs_bset+0x14/0x4c [renesas_usbhs] [13.315831] lr : usbhs_probe+0x2e4/0x5ac [renesas_usbhs] [13.321138] sp : ffff8000827e3850 [13.324438] x29: ffff8000827e3860 x28: 0000000000000000 x27: ffff8000827e3ca0 [13.331554] x26: ffff8000827e3ba0 x25: ffff800081729668 x24: 0000000000000025 [13.338670] x23: ffff0000c0f08000 x22: 0000000000000000 x21: ffff0000c0f08010 [13.345783] x20: 0000000000000000 x19: ffff0000c3b52080 x18: 00000000ffffffff [13.352895] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000827e36ce [13.360009] x14: 00000000000003d7 x13: 00000000000003d7 x12: 0000000000000000 [13.367122] x11: 0000000000000000 x10: 0000000000000aa0 x9 : ffff8000827e3750 [13.374235] x8 : ffff0000c1850b00 x7 : 0000000003826060 x6 : 000000000000001c [13.381347] x5 : 000000030d5fcc00 x4 : ffff8000825c0000 x3 : 0000000000000000 [13.388459] x2 : 0000000000000400 x1 : 0000000000000000 x0 : ffff0000c3b52080 [13.395574] Call trace: [13.398013] usbhs_bset+0x14/0x4c [renesas_usbhs] (P) [13.403076] platform_probe+0x68/0xdc [13.406738] really_probe+0xbc/0x2c0 [13.410306] __driver_probe_device+0x78/0x120 [13.414653] driver_probe_device+0x3c/0x154 [13.418825] __driver_attach+0x90/0x1a0 [13.422647] bus_for_each_dev+0x7c/0xe0 [13.426470] driver_attach+0x24/0x30 [13.430032] bus_add_driver+0xe4/0x208 [13.433766] driver_register+0x68/0x130 [13.437587] __platform_driver_register+0x24/0x30 [13.442273] renesas_usbhs_driver_init+0x20/0x1000 [renesas_usbhs] [13.448450] do_one_initcall+0x60/0x1d4 [13.452276] do_init_module+0x54/0x1f8 [13.456014] load_module+0x1754/0x1c98 [13.459750] init_module_from_file+0x88/0xcc [13.464004] __arm64_sys_finit_module+0x1c4/0x328 [13.468689] invoke_syscall+0x48/0x104 [13.472426] el0_svc_common.constprop.0+0xc0/0xe0 [13.477113] do_el0_svc+0x1c/0x28 [13.480415] el0_svc+0x30/0xcc [13.483460] el0t_64_sync_handler+0x10c/0x138 [13.487800] el0t_64_sync+0x198/0x19c [13.491453] Code: 2a0103e1 12003c42 12003c63 8b010084 (79400084) [13.497522] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: iio: common: st_sensors: Fix use of uninitialize device structs Throughout the various probe functions &indio_dev->dev is used before it is initialized. This caused a kernel panic in st_sensors_power_enable() when the call to devm_regulator_bulk_get_enable() fails and then calls dev_err_probe() with the uninitialized device. This seems to only cause a panic with dev_err_probe(), dev_err(), dev_warn() and dev_info() don't seem to cause a panic, but are fixed as well. The issue is reported and traced here: [1]

In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Limit signal/freq counts in summary output functions The debugfs summary output could access uninitialized elements in the freq_in[] and signal_out[] arrays, causing NULL pointer dereferences and triggering a kernel Oops (page_fault_oops). This patch adds u8 fields (nr_freq_in, nr_signal_out) to track the number of initialized elements, with a maximum of 4 per array. The summary output functions are updated to respect these limits, preventing out-of-bounds access and ensuring safe array handling. Widen the label variables because the change confuses GCC about max length of the strings.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported Russell King reports that on the ZII dev rev B, deleting a bridge VLAN from a user port fails with -ENOENT: https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/ This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(), which tries to find an MST entry in &chip->msts associated with the SID, but fails and returns -ENOENT as such. But we know that this chip does not support MST at all, so that is not surprising. The question is why does the guard in mv88e6xxx_mst_put() not exit early: if (!sid) return 0; And the answer seems to be simple: the sid comes from vlan.sid which supposedly was previously populated by mv88e6xxx_vtu_get(). But some chip->info->ops->vtu_getnext() implementations do not populate vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case, later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is just residual stack memory. Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge VLAN mapped to the default MSTI. For some chips, SID 0 is valid and installed by mv88e6xxx_stu_setup(). A chip which does not support the STU would implicitly only support mapping all VLANs to the default MSTI, so although SID 0 is not valid, it would be sufficient, if we were to zero-initialize the vlan structure, to fix the bug, due to the coincidence that a test for vlan.sid == 0 already exists and leads to the same (correct) behavior. Another option which would be sufficient would be to add a test for mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one which already exists in mv88e6xxx_mst_get(). But that placement means the caller will have to dereference vlan.sid, which means it will access uninitialized memory, which is not nice even if it ignores it later. So we end up making both modifications, in order to not rely just on the sid == 0 coincidence, but also to avoid having uninitialized structure fields which might get temporarily accessed.

In the Linux kernel, the following vulnerability has been resolved: net: ch9200: fix uninitialised access during mii_nway_restart In mii_nway_restart() the code attempts to call mii->mdio_read which is ch9200_mdio_read(). ch9200_mdio_read() utilises a local buffer called "buff", which is initialised with control_read(). However "buff" is conditionally initialised inside control_read(): if (err == size) { memcpy(data, buf, size); } If the condition of "err == size" is not met, then "buff" remains uninitialised. Once this happens the uninitialised "buff" is accessed and returned during ch9200_mdio_read(): return (buff[0] | buff[1] << 8); The problem stems from the fact that ch9200_mdio_read() ignores the return value of control_read(), leading to uinit-access of "buff". To fix this we should check the return value of control_read() and return early on error.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto() syzbot found a potential access to uninit-value in nf_flow_pppoe_proto() Blamed commit forgot the Ethernet header. BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27 nf_flow_offload_inet_hook+0x7e4/0x940 net/netfilter/nf_flow_table_inet.c:27 nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline] nf_hook_slow+0xe1/0x3d0 net/netfilter/core.c:623 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5742 [inline] __netif_receive_skb_core+0x4aff/0x70c0 net/core/dev.c:5837 __netif_receive_skb_one_core net/core/dev.c:5975 [inline] __netif_receive_skb+0xcc/0xac0 net/core/dev.c:6090 netif_receive_skb_internal net/core/dev.c:6176 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6235 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x4ee0/0x6b40 drivers/net/tun.c:1938 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1984 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xb4b/0x1580 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline]

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uninit-value access of imap allocated in the diMount() function syzbot reports that hex_dump_to_buffer is using uninit-value: ===================================================== BUG: KMSAN: uninit-value in hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276 diFree+0x5ba/0x4350 fs/jfs/jfs_imap.c:876 jfs_evict_inode+0x510/0x550 fs/jfs/inode.c:156 evict+0x723/0xd10 fs/inode.c:796 iput_final fs/inode.c:1946 [inline] iput+0x97b/0xdb0 fs/inode.c:1972 txUpdateMap+0xf3e/0x1150 fs/jfs/jfs_txnmgr.c:2367 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x627/0x11d0 fs/jfs/jfs_txnmgr.c:2733 kthread+0x6b9/0xef0 kernel/kthread.c:464 ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_post_alloc_hook mm/slub.c:4121 [inline] slab_alloc_node mm/slub.c:4164 [inline] __kmalloc_cache_noprof+0x8e3/0xdf0 mm/slub.c:4320 kmalloc_noprof include/linux/slab.h:901 [inline] diMount+0x61/0x7f0 fs/jfs/jfs_imap.c:105 jfs_mount+0xa8e/0x11d0 fs/jfs/jfs_mount.c:176 jfs_fill_super+0xa47/0x17c0 fs/jfs/super.c:523 get_tree_bdev_flags+0x6ec/0x910 fs/super.c:1636 get_tree_bdev+0x37/0x50 fs/super.c:1659 jfs_get_tree+0x34/0x40 fs/jfs/super.c:635 vfs_get_tree+0xb1/0x5a0 fs/super.c:1814 do_new_mount+0x71f/0x15e0 fs/namespace.c:3560 path_mount+0x742/0x1f10 fs/namespace.c:3887 do_mount fs/namespace.c:3900 [inline] __do_sys_mount fs/namespace.c:4111 [inline] __se_sys_mount+0x71f/0x800 fs/namespace.c:4088 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4088 x64_sys_call+0x39bf/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ===================================================== The reason is that imap is not properly initialized after memory allocation. It will cause the snprintf() function to write uninitialized data into linebuf within hex_dump_to_buffer(). Fix this by using kzalloc instead of kmalloc to clear its content at the beginning in diMount().

In the Linux kernel, the following vulnerability has been resolved: wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage() The function brcmf_usb_dl_writeimage() calls the function brcmf_usb_dl_cmd() but dose not check its return value. The 'state.state' and the 'state.bytes' are uninitialized if the function brcmf_usb_dl_cmd() fails. It is dangerous to use uninitialized variables in the conditions. Add error handling for brcmf_usb_dl_cmd() to jump to error handling path if the brcmf_usb_dl_cmd() fails and the 'state.state' and the 'state.bytes' are uninitialized. Improve the error message to report more detailed error information.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator BPF programs may call next() and destroy() on BPF iterators even after new() returns an error value (e.g. bpf_for_each() macro ignores error returns from new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized state after an error return causing bpf_iter_scx_dsq_next() to dereference garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that next() and destroy() become noops.

In the Linux kernel, the following vulnerability has been resolved: mtd: nand: ecc-mxic: Fix use of uninitialized variable ret If ctx->steps is zero, the loop processing ECC steps is skipped, and the variable ret remains uninitialized. It is later checked and returned, which leads to undefined behavior and may cause unpredictable results in user space or kernel crashes. This scenario can be triggered in edge cases such as misconfigured geometry, ECC engine misuse, or if ctx->steps is not validated after initialization. Initialize ret to zero before the loop to ensure correct and safe behavior regardless of the ctx->steps value. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: libnvdimm/labels: Fix divide error in nd_label_data_init() If a faulty CXL memory device returns a broken zero LSA size in its memory device information (Identify Memory Device (Opcode 4000h), CXL spec. 3.1, 8.2.9.9.1.1), a divide error occurs in the libnvdimm driver: Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:nd_label_data_init+0x10e/0x800 [libnvdimm] Code and flow: 1) CXL Command 4000h returns LSA size = 0 2) config_size is assigned to zero LSA size (CXL pmem driver): drivers/cxl/pmem.c: .config_size = mds->lsa_size, 3) max_xfer is set to zero (nvdimm driver): drivers/nvdimm/label.c: max_xfer = min_t(size_t, ndd->nsarea.max_xfer, config_size); 4) A subsequent DIV_ROUND_UP() causes a division by zero: drivers/nvdimm/label.c: /* Make our initial read size a multiple of max_xfer size */ drivers/nvdimm/label.c: read_size = min(DIV_ROUND_UP(read_size, max_xfer) * max_xfer, drivers/nvdimm/label.c- config_size); Fix this by checking the config size parameter by extending an existing check.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort() Commit fce886a60207 ("KVM: arm64: Plumb the pKVM MMU in KVM") made the initialization of the local memcache variable in user_mem_abort() conditional, leaving a codepath where it is used uninitialized via kvm_pgtable_stage2_map(). This can fail on any path that requires a stage-2 allocation without transition via a permission fault or dirty logging. Fix this by making sure that memcache is always valid.

In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure snd_una is properly initialized on connect This is strictly related to commit fb7a0d334894 ("mptcp: ensure snd_nxt is properly initialized on connect"). It turns out that syzkaller can trigger the retransmit after fallback and before processing any other incoming packet - so that snd_una is still left uninitialized. Address the issue explicitly initializing snd_una together with snd_nxt and write_seq.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: don't attempt to schedule hpd_work on headless cards If the card doesn't have display hardware, hpd_work and hpd_lock are left uninitialized which causes BUG when attempting to schedule hpd_work on runtime PM resume. Fix it by adding headless flag to DRM and skip any hpd if it's set.

In the Linux kernel, the following vulnerability has been resolved: netrom: check buffer length before accessing it Syzkaller reports an uninit value read from ax25cmp when sending raw message through ieee802154 implementation. ===================================================== BUG: KMSAN: uninit-value in ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119 ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119 nr_dev_get+0x20e/0x450 net/netrom/nr_route.c:601 nr_route_frame+0x1a2/0xfc0 net/netrom/nr_route.c:774 nr_xmit+0x5a/0x1c0 net/netrom/nr_dev.c:144 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] raw_sendmsg+0x654/0xc10 net/ieee802154/socket.c:299 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] raw_sendmsg+0x36d/0xc10 net/ieee802154/socket.c:282 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5037 Comm: syz-executor166 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 ===================================================== This issue occurs because the skb buffer is too small, and it's actual allocation is aligned. This hides an actual issue, which is that nr_route_frame does not validate the buffer size before using it. Fix this issue by checking skb->len before accessing any fields in skb->data. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix channel survey memory allocation size KASAN reported a memory allocation issue in wcn->chan_survey due to incorrect size calculation. This commit uses kcalloc to allocate memory for wcn->chan_survey, ensuring proper initialization and preventing the use of uninitialized values when there are no frames on the channel.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: free inode when ocfs2_get_init_inode() fails syzbot is reporting busy inodes after unmount, for commit 9c89fe0af826 ("ocfs2: Handle error from dquot_initialize()") forgot to call iput() when new_inode() succeeded and dquot_initialize() failed.

In the Linux kernel, the following vulnerability has been resolved: rtc: check if __rtc_read_time was successful in rtc_timer_do_work() If the __rtc_read_time call fails,, the struct rtc_time tm; may contain uninitialized data, or an illegal date/time read from the RTC hardware. When calling rtc_tm_to_ktime later, the result may be a very large value (possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue, they will continually expire, may causing kernel softlockup.