Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to versions 6.0.16 and 7.0.3, an attacker can craft traffic to cause Suricata to use far more CPU and memory for processing the traffic than needed, which can lead to extreme slow downs and denial of service. This vulnerability is patched in 6.0.16 or 7.0.3. Workarounds include disabling the affected protocol app-layer parser in the yaml and reducing the `stream.reassembly.depth` value helps reduce the severity of the issue.

IBM WebSphere Application Server Liberty 17.0.0.3 through 24.0.0.4 is vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 280400.

Very large headers can cause resource exhaustion when parsing message. The message-parser normally reads reasonably sized chunks of the message. However, when it feeds them to message-header-parser, it starts building up "full_value" buffer out of the smaller chunks. The full_value buffer has no size limit, so large headers can cause large memory usage. It doesn't matter whether it's a single long header line, or a single header split into multiple lines. This bug exists in all Dovecot versions. Incoming mails typically have some size limits set by MTA, so even largest possible header size may still fit into Dovecot's vsz_limit. So attackers probably can't DoS a victim user this way. A user could APPEND larger mails though, allowing them to DoS themselves (although maybe cause some memory issues for the backend in general). One can implement restrictions on headers on MTA component preceding Dovecot. No publicly available exploits are known.

OpenSIPS is a Session Initiation Protocol (SIP) server implementation. Prior to versions 3.1.8 and 3.2.5, OpenSIPS crashes when a malformed SDP body is sent multiple times to an OpenSIPS configuration that makes use of the `stream_process` function. This issue was discovered during coverage guided fuzzing of the function `codec_delete_except_re`. By abusing this vulnerability, an attacker is able to crash the server. It affects configurations containing functions that rely on the affected code, such as the function `codec_delete_except_re`. This issue has been fixed in version 3.1.8 and 3.2.5.

Jetty is a Java based web server and servlet engine. An HTTP/2 SSL connection that is established and TCP congested will be leaked when it times out. An attacker can cause many connections to end up in this state, and the server may run out of file descriptors, eventually causing the server to stop accepting new connections from valid clients. The vulnerability is patched in 9.4.54, 10.0.20, 11.0.20, and 12.0.6.

Versions of the package @eslint/plugin-kit before 0.2.3 are vulnerable to Regular Expression Denial of Service (ReDoS) due to improper input sanitization. An attacker can increase the CPU usage and crash the program by exploiting this vulnerability.

Amazon Ion is a Java implementation of the Ion data notation. Prior to version 1.10.5, a potential denial-of-service issue exists in `ion-java` for applications that use `ion-java` to deserialize Ion text encoded data, or deserialize Ion text or binary encoded data into the `IonValue` model and then invoke certain `IonValue` methods on that in-memory representation. An actor could craft Ion data that, when loaded by the affected application and/or processed using the `IonValue` model, results in a `StackOverflowError` originating from the `ion-java` library. The patch is included in `ion-java` 1.10.5. As a workaround, do not load data which originated from an untrusted source or that could have been tampered with.

A malicious user may submit a specially-crafted complex payload that otherwise meets the default request size limit which results in excessive memory and CPU consumption of Vault. This may lead to a timeout in Vault’s auditing subroutine, potentially resulting in the Vault server to become unresponsive. This vulnerability, CVE-2025-6203, is fixed in Vault Community Edition 1.20.3 and Vault Enterprise 1.20.3, 1.19.9, 1.18.14, and 1.16.25.

For unspecified traffic patterns, BIG-IP AFM IPS engine may spend an excessive amount of time matching the traffic against signatures, resulting in Traffic Management Microkernel (TMM) restarting and traffic disruption.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

If a server hosts a zone containing a "KEY" Resource Record, or a resolver DNSSEC-validates a "KEY" Resource Record from a DNSSEC-signed domain in cache, a client can exhaust resolver CPU resources by sending a stream of SIG(0) signed requests. This issue affects BIND 9 versions 9.0.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.49-S1, and 9.18.11-S1 through 9.18.27-S1.

Resolver caches and authoritative zone databases that hold significant numbers of RRs for the same hostname (of any RTYPE) can suffer from degraded performance as content is being added or updated, and also when handling client queries for this name. This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.11.4-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.27-S1.

Mastodon is a free, open-source social network server based on ActivityPub Mastodon which facilitates LDAP configuration for authentication. In versions 3.1.5 through 4.2.24, 4.3.0 through 4.3.11 and 4.4.0 through 4.4.3, Mastodon's rate-limiting system has a critical configuration error where the email-based throttle for confirmation emails incorrectly checks the password reset path instead of the confirmation path, effectively disabling per-email limits for confirmation requests. This allows attackers to bypass rate limits by rotating IP addresses and send unlimited confirmation emails to any email address, as only a weak IP-based throttle (25 requests per 5 minutes) remains active. The vulnerability enables denial-of-service attacks that can overwhelm mail queues and facilitate user harassment through confirmation email spam. This is fixed in versions 4.2.24, 4.3.11 and 4.4.3.

Cloudflare Quiche (through version 0.19.1/0.20.0) was affected by an unlimited resource allocation vulnerability causing rapid increase of memory usage of the system running quiche server or client. A remote attacker could take advantage of this vulnerability by repeatedly sending an unlimited number of 1-RTT CRYPTO frames after previously completing the QUIC handshake. Exploitation was possible for the duration of the connection which could be extended by the attacker.  quiche 0.19.2 and 0.20.1 are the earliest versions containing the fix for this issue.

In version 0.3.32 of open-webui/open-webui, the absence of authentication mechanisms allows any unauthenticated attacker to access the `api/v1/utils/code/format` endpoint. If a malicious actor sends a POST request with an excessively high volume of content, the server could become completely unresponsive. This could lead to severe performance issues, causing the server to become unresponsive or experience significant degradation, ultimately resulting in service interruptions for legitimate users.

Clients using DNS-over-HTTPS (DoH) can exhaust a DNS resolver's CPU and/or memory by flooding it with crafted valid or invalid HTTP/2 traffic. This issue affects BIND 9 versions 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, and 9.18.11-S1 through 9.18.32-S1.

A Denial-of-Service (DoS) vulnerability was discovered in Team Server in HelpSystems Cobalt Strike 4.2 and 4.3. It allows remote attackers to crash the C2 server thread and block beacons' communication with it.

IBM Counter Fraud Management for Safer Payments 6.1.0.00, 6.2.0.00, 6.3.0.00 through 6.3.1.03, 6.4.0.00 through 6.4.2.02 and 6.5.0.00 does not properly allocate resources without limits or throttling which could allow a remote attacker to cause a denial of service. IBM X-Force ID: 249190.

`silverstripe/graphql` serves Silverstripe data as GraphQL representations. In versions 4.2.2 and 4.1.1, an attacker could use a specially crafted graphql query to execute a denial of service attack against a website which has a publicly exposed graphql endpoint. This mostly affects websites with particularly large/complex graphql schemas. Users should upgrade to `silverstripe/graphql` 4.2.3 or 4.1.2 to remedy the vulnerability.

Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines() method would not "pause" writing and signal to the Protocol to drain the buffer to the wire once the write buffer reached the "high-water mark". Because of this, Protocols would not periodically drain the write buffer potentially leading to memory exhaustion. This vulnerability likely impacts a small number of users, you must be using Python 3.12.0 or later, on macOS or Linux, using the asyncio module with protocols, and using .writelines() method which had new zero-copy-on-write behavior in Python 3.12.0 and later. If not all of these factors are true then your usage of Python is unaffected.

A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Fileszie Check vulnerabilities allow a malicious user to bypass size limits or overload to the product.  Affected products: ABB ASPECT - Enterprise v3.08.02; NEXUS Series v3.08.02; MATRIX Series v3.08.02

When reading a specially crafted 7Z archive, Compress can be made to allocate large amounts of memory that finally leads to an out of memory error even for very small inputs. This could be used to mount a denial of service attack against services that use Compress' sevenz package.

When reading a specially crafted TAR archive, Compress can be made to allocate large amounts of memory that finally leads to an out of memory error even for very small inputs. This could be used to mount a denial of service attack against services that use Compress' tar package.

A vulnerability in the email scanning algorithm of Cisco AsyncOS software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to perform a denial of service (DoS) attack against an affected device. This vulnerability is due to insufficient input validation of incoming emails. An attacker could exploit this vulnerability by sending a crafted email through Cisco ESA. A successful exploit could allow the attacker to exhaust all the available CPU resources on an affected device for an extended period of time, preventing other emails from being processed and resulting in a DoS condition.

In Moodle before 3.9.1, 3.8.4, 3.7.7 and 3.5.13, yui_combo needed to limit the amount of files it can load to help mitigate the risk of denial of service.

Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A malicious client can send many DNS messages over TCP, potentially causing the server to become unstable while the attack is in progress. The server may recover after the attack ceases. Use of ACLs will not mitigate the attack. This issue affects BIND 9 versions 9.18.1 through 9.18.27, 9.19.0 through 9.19.24, and 9.18.11-S1 through 9.18.27-S1.

The jv_dump_term function in jq 1.5 allows remote attackers to cause a denial of service (stack consumption and application crash) via a crafted JSON file. This issue has been fixed in jq 1.6_rc1-r0.

Knot Resolver before 5.6.0 enables attackers to consume its resources, launching amplification attacks and potentially causing a denial of service. Specifically, a single client query may lead to a hundred TCP connection attempts if a DNS server closes connections without providing a response.

LibHTP is a security-aware parser for the HTTP protocol. Crafted traffic can cause excessive processing time of HTTP headers, leading to denial of service. This issue is addressed in 0.5.46.

encoded_id-rails versions before 1.0.0.beta2 are affected by an uncontrolled resource consumption vulnerability. A remote and unauthenticated attacker might cause a denial of service condition by sending an HTTP request with an extremely long "id" parameter.

To keep its cache database efficient, `named` running as a recursive resolver occasionally attempts to clean up the database. It uses several methods, including some that are asynchronous: a small chunk of memory pointing to the cache element that can be cleaned up is first allocated and then queued for later processing. It was discovered that if the resolver is continuously processing query patterns triggering this type of cache-database maintenance, `named` may not be able to handle the cleanup events in a timely manner. This in turn enables the list of queued cleanup events to grow infinitely large over time, allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.16.0 through 9.16.45 and 9.16.8-S1 through 9.16.45-S1.

A limitless resource allocation vulnerability in FPC resources of Juniper Networks Junos OS Evolved on PTX Series allows an unprivileged attacker to cause Denial of Service (DoS). Continuously polling the SNMP jnxCosQstatTable causes the FPC to run out of GUID space, causing a Denial of Service to the FPC resources. When the FPC runs out of the GUID space, you will see the following syslog messages. The evo-aftmand-bt process is asserting. fpc1 evo-aftmand-bt[17556]: %USER-3: get_next_guid: Ran out of Guid Space start 1748051689472 end 1752346656767 fpc1 audit[17556]: %AUTH-5: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 kernel: %KERN-5: audit: type=1701 audit(1648567505.119:57): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 emfd-fpa[14438]: %USER-5: Alarm set: APP color=red, class=CHASSIS, reason=Application evo-aftmand-bt fail on node Fpc1 fpc1 emfd-fpa[14438]: %USER-3-EMF_FPA_ALARM_REP: RaiseAlarm: Alarm(Location: /Chassis[0]/Fpc[1] Module: sysman Object: evo-aftmand-bt:0 Error: 2) reported fpc1 sysepochman[12738]: %USER-5-SYSTEM_REBOOT_EVENT: Reboot [node] [ungraceful reboot] [evo-aftmand-bt exited] The FPC resources can be monitored using the following commands: user@router> start shell [vrf:none] user@router-re0:~$ cli -c "show platform application-info allocations app evo-aftmand-bt" | grep ^fpc | grep -v Route | grep -i -v Nexthop | awk '{total[$1] += $5} END { for (key in total) { print key " " total[key]/4294967296 }}' Once the FPCs become unreachable they must be manually restarted as they do not self-recover. This issue affects Juniper Networks Junos OS Evolved on PTX Series: All versions prior to 20.4R3-S4-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO version 21.2R1-EVO and later versions; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO.

LiteSpeed QUIC (LSQUIC) Library before 4.3.1 has an lsquic_engine_packet_in memory leak.

HashiCorp Vault and Vault Enterprise 1.12.0 and newer are vulnerable to a denial of service through memory exhaustion of the host when handling large unauthenticated and authenticated HTTP requests from a client. Vault will attempt to map the request to memory, resulting in the exhaustion of available memory on the host, which may cause Vault to crash. Fixed in Vault 1.15.4, 1.14.8, 1.13.12.

Improper memory allocation during counter check DLM handling can lead to denial of service in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Industrial IOT, Snapdragon Mobile

pypdf is a free and open-source pure-python PDF library. Prior to version 6.0.0, an attacker can craft a PDF which leads to the RAM being exhausted. This requires just reading the file if a series of FlateDecode filters is used on a malicious cross-reference stream. Other content streams are affected on explicit access. This issue has been fixed in 6.0.0. If an update is not possible, a workaround involves including the fixed code from pypdf.filters.decompress into the existing filters file.

A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products.

@fastify/multipart is a Fastify plugin to parse the multipart content-type. Prior to versions 7.4.1 and 6.0.1, @fastify/multipart may experience denial of service due to a number of situations in which an unlimited number of parts are accepted. This includes the multipart body parser accepting an unlimited number of file parts, the multipart body parser accepting an unlimited number of field parts, and the multipart body parser accepting an unlimited number of empty parts as field parts. This is fixed in v7.4.1 (for Fastify v4.x) and v6.0.1 (for Fastify v3.x). There are no known workarounds.

Chall-Manager is a platform-agnostic system able to start Challenges on Demand of a player. The HTTP Gateway processes headers, but with no timeout set. With a slow loris attack, an attacker could cause Denial of Service (DoS). Exploitation does not require authentication nor authorization, so anyone can exploit it. It should nonetheless not be exploitable as it is highly recommended to bury Chall-Manager deep within the infrastructure due to its large capabilities, so no users could reach the system. Patch has been implemented by commit 1385bd8 and shipped in v0.1.4.

Apache Commons FileUpload before 1.5 does not limit the number of request parts to be processed resulting in the possibility of an attacker triggering a DoS with a malicious upload or series of uploads. Note that, like all of the file upload limits, the new configuration option (FileUploadBase#setFileCountMax) is not enabled by default and must be explicitly configured.

WeGIA is a web manager for charitable institutions. The Wegia server has a vulnerability that allows excessively long HTTP GET requests to a specific URL. This issue arises from the lack of validation for the length of the errorstr parameter. Tests confirmed that the server processes URLs up to 8,142 characters, resulting in high resource consumption, elevated latency, timeouts, and read errors. This makes the server susceptible to Denial of Service (DoS) attacks. This vulnerability is fixed in 3.3.0.

A flaw was found in CRI-O that involves an experimental annotation leading to a container being unconfined. This may allow a pod to specify and get any amount of memory/cpu, circumventing the kubernetes scheduler and potentially resulting in a denial of service in the node.

Werkzeug is a comprehensive WSGI web application library. Prior to version 2.2.3, Werkzeug's multipart form data parser will parse an unlimited number of parts, including file parts. Parts can be a small amount of bytes, but each requires CPU time to parse and may use more memory as Python data. If a request can be made to an endpoint that accesses `request.data`, `request.form`, `request.files`, or `request.get_data(parse_form_data=False)`, it can cause unexpectedly high resource usage. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. The amount of RAM required can trigger an out of memory kill of the process. Unlimited file parts can use up memory and file handles. If many concurrent requests are sent continuously, this can exhaust or kill all available workers. Version 2.2.3 contains a patch for this issue.

Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions 7.0.10 and below and 8.0.0-beta1 through 8.0.0-rc1, mishandling of data on HTTP2 stream 0 can lead to uncontrolled memory usage, leading to loss of visibility. Workarounds include disabling the HTTP/2 parser, and using a signature like drop http2 any any -> any any (frame:http2.hdr; byte_test:1,=,0,3; byte_test:4,=,0,5; sid: 1;) where the first byte test tests the HTTP2 frame type DATA and the second tests the stream id 0. This is fixed in versions 7.0.11 and 8.0.0.

Due to insufficient length validation in the Open5GS GTP library versions prior to versions 2.4.13 and 2.5.7, when parsing extension headers in GPRS tunneling protocol (GPTv1-U) messages, a protocol payload with any extension header length set to zero causes an infinite loop. The affected process becomes immediately unresponsive, resulting in denial of service and excessive resource consumption. CVSS3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C

In BIP-IP versions 17.0.x before 17.0.0.2, 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when OCSP authentication profile is configured on a virtual server, undisclosed requests can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A denial of service vulnerability was identified in GitLab CE/EE, affecting all versions from 15.11 prior to 16.6.7, 16.7 prior to 16.7.5 and 16.8 prior to 16.8.2 which allows an attacker to spike the GitLab instance resource usage resulting in service degradation.